Reference:Administration/DECT/Master-Calls

From innovaphone wiki
Jump to navigation Jump to search
There are also other versions of this article available: Reference (this version) | Reference8 | Reference9

Note: This information applies to IP1200

Statistic

Some statistical informations about calls, handovers and the maximum number of calls at the same time.

Call list

The currently active calls carried out via the DECT master can be monitored. Here, it is to be noted that internal calls between innovaphone PBX subscribers are not displayed if the optional innovaphone PBX component is installed.

A <Sender> Calling subscriber
B <Receiver> Called subscriber
State Calling
Alerting
Connected
Incomplete
Disconnecting
Call is being set up
Call is being signalled
Call connected
Call incomplete
Call is being disconnected
Radio IP1200-xx-xx-xx The DECT system used.
Local Media xxx.xxx.xxx.xxx:xxxx The IP address and port of the DECT system used.
Remote Media xxx.xxx.xxx.xxx:xxxx The IP address and port of the VoIP device on which the innovaphone PBX component is enabled.