Howto:Siemens Gigaset S685IP - Siemens -Testreport

From innovaphone wiki
Jump to navigation Jump to search

Summary

The Siemens Gigaset S685IP DECT phone supports all required innovaphone features and is therefore qualified as recommended product.

The usage of wideband codecs of the phone were tested successfully. The integration of the innovaphone voicemail in the Gigaset solution is possible. The message waiting indication will be displayed on the handsets. The handsets support 3-party conference calls.

Currently, the phones cannot access a LDAP phone book directory. The S685 IP base-station supports up to 2 concurrent VoIP calls.

Certification Status

The tests for this product have been completed.

Testing of this product has been finalized January 11th, 2011.

Version

Firmware Version:

022270000000 / 047.00

EEPROM version:

185

innovaphone Firmware:

v8 HotFix8 (80500.28)

Test Setup

Testreport Terminals SIP or H323 1.PNG

Device Setup

Tested feature Result
Register Device w/o specific configuration (requires DHCP) No
DHCP is default Yes
DHCP yields timeserver and time displays correctly No, set static to public NTP server
SNTP config has TZ string for timezone/dst autoconfig No, set static to public NTP server
DHCP yields correct default gateway Yes
Device supports magic registration (e.g. by serial) No
Fixed registrations works Yes
Device registers w/o Extension (just by name) Yes
Device registers by extension Yes
Device registers with password Yes
Device registers multiple identities Yes
Device supports STUN protocol Yes
Device sends NAT - keepalive messages Yes
Device is compatible with innovaphone's NAT traversal implementation Yes
Device refreshes the PBX registration Yes
Device supports SIP over TCP No
Device supports SRTP No
Device supports SIPS (SIP over TLS) No
Device supports HTTPS No
Device supports VAD (Voice activity detection) not tested
Supported menu languages many, check product specifications.
3-party conference Yes

Test Results

Basic Call

Tested feature Result
call using g711a Yes
call using g711u Yes
call using g729 Yes
Overlapped sending No
Early media channel Yes
Device shows called id number Yes
Device shows called id name Yes
Device shows called id display info Yes
Fax using T.38 N/A
CGPN can be supressed Yes
Reverse Media Negotiaton Yes
Device shows CDPN/CGPN on incoming call Yes
Device shows CDPN/CGPN on outgoing call Yes
Device shows connected number No
Device shows diverting number Yes
Device supports distinctive ringing No
Device supports asymetric codec negotiation not tested
Device supports codec renegotiation during a conversation Yes
Device shows correct display message in case of busy CDPN Yes
Device shows correct display message in case of not existing CDPN Yes
Device shows correct display message in case that the call is declined Yes
SOAP Call works? Yes, auto answer possible.
Long Time Call (>30 min) works? Yes
Device supports display updates during call(needed for Directory Search object) No
Voice Quality OK? Yes

DTMF

Tested feature Result
DTMF tones sent correctly Yes
DTMF tones received correctly Yes

Hold/Retrieve

Tested feature Result
Device handles incoming hold correctly Yes
Device can put a call on hold using correctly(inactive or sendonly) Yes (not by R-key but by menu option)

Transfer with consultation

Tested feature Voice Ok? MoH Ok?
inno1 calls inno2. inno2 transfers to testphone. Yes Yes
inno1 calls inno2. inno1 transfers to testphone. Yes Yes
inno1 calls testphone. inno1 transfers to inno2. Yes Yes
inno1 calls testphone. testphone transfers to inno2. Yes Yes
testphone calls inno1. inno1 transfers to inno2. Yes Yes
testphone calls inno1. testphone transfers to inno2. Yes Yes

Transfer with consultation (alerting only)

Tested feature Voice Ok? MoH Ok?
inno1 calls inno2. inno2 transfers to testphone. Yes Yes
inno1 calls inno2. inno1 transfers to testphone. Yes Yes
inno1 calls testphone. inno1 transfers to inno2. Yes Yes
inno1 calls testphone. testphone transfers to inno2. Yes Yes
testphone calls inno1. inno1 transfers to inno2. Yes Yes
testphone calls inno1. testphone transfers to inno2. Yes Yes

Blind Transfer

Tested feature Voice Ok?
inno1 calls inno2. inno2 transfers to testphone. Yes
inno1 calls inno2. inno1 transfers to testphone. Yes
inno1 calls testphone. inno1 transfers to inno2. Yes
inno1 calls testphone. testphone transfers to inno2. No
testphone calls inno1. inno1 transfers to inno2. Yes
testphone calls inno1. testphone transfers to inno2. No

Blind Transfer (alerting only)

Tested feature Voice Ok?
inno1 calls inno2. inno2 transfers to testphone. Yes
inno1 calls testphone. testphone transfers to inno2. No
testphone calls inno1. inno1 transfers to inno2. Yes

Broadcast Group & Waiting Queue

Tested feature Result
testphone makes call to a Broadcast Group. inno1 picks up. Yes
inno1 makes call to a Broadcast Group. testphone picks up. Yes
testphone makes call to a Waiting Queue. inno1 picks up before announcement is played. Yes
testphone makes call to a Waiting Queue. inno1 picks up after announcement is played. Yes
inno1 makes call to a Waiting Queue. testphone picks up. Yes

Other Features

Directory

Tested feature Result
Device built-in directory not possible to connect to a LDAP phonebook(Estos Metadir)
Exists Yes, only local
Can be dialled from Yes
Does CLI resolution Yes

Hands free

Tested feature Result
Loudspeaker operation works fine Yes
Hands free works fine Yes
Volume adjustable during call Yes

Keys

Tested feature Result
Device has speed dial keys Yes
Device has programmable function keys Yes
Device has partner keys No

Configuration

innovaphone configuration

Add a new PBX object of type "user":
Siemens Gigaset S685IP - Siemens -Testreport 1.PNG

3rd party product configuration

Telephony Connection

First you have to create a registration from the DECT/IP base-station to the PBX. Go to Telephony->Connections and edit the first entry.

Click on Select Provider and choose your country and innovaphonePBX. This will ensure that all settings are configured correctly.

The device still needs the IP address of the PBX to register at and the name of the user for whom the registration shall be made. Click on Show advanced settings in order to enter as Domain name the IP address of your innovaphone PBX.

Please note that the registration credentials configured at the Gigaset phone use the number of the corresponding PBX object, not its name. Registration by using the name is also possible, but will result in CGPN display problems when making calls from the Gigaset phone to a mobility enabled user.

Siemens Gigaset S685IP - Siemens -Testreport 2.PNG

Number Assignment

If you have more than one DECT handset registered to your base-station, you can use the Telephony->Number Assignment menu to assign a DECT handset to a specific PBX registration. Siemens Gigaset S685IP - Siemens -Testreport 3.PNG

Voicemail

To get the current voicemail status displayed on your DECT handset, you have to enter the corresponding innovaphone voicemail number in the Telephony->Network Mailbox menu. Siemens Gigaset S685IP - Siemens -Testreport 4.PNG