Howto:CTI Remote Test PBX: Difference between revisions

From innovaphone wiki
Jump to navigation Jump to search
(New page: innovaphone provides a CTI Test PBX. This system allows partners to do a quick test of their CTI software easily without the need to set up their own system. == Access == The CTI Test P...)
 
No edit summary
Line 2: Line 2:


== Access ==
== Access ==
The CTI Test PBX is available at [http://145.253.157.158/ | http://145.253.157.158 ].
The CTI Test PBX is available at [http://145.253.157.158/ | 145.253.157.158 ].


To view the PBX administration user interface, use the ''viewer'' account
To view the PBX administration user interface, use the ''viewer'' account
Line 13: Line 13:
User: <code>_TAPI_</code><br>
User: <code>_TAPI_</code><br>
Password: <code>soap</code>
Password: <code>soap</code>


Here is how your TAPI configuration should look like:
Here is how your TAPI configuration should look like:
[[Image:cti-test-pbx-01.png]]
To look at the PBX's administration user interface, open [http://145.253.157.158/ | 145.253.157.158 ] in your browser and user <code>viewer</code> as both user name and password when you are asked for:
[[Image:cti-test-pbx-02.png]]
== Available Users / Lines ==
The following users are available for CTI:
{|
| User || Short Name || Extension || Device || Remark
|-
| CTI10 || cti10 || 10 || cti10 || no registration
|-
|      || || || IP200A-10-06-bb || phone registered
|-
| CTI20 || cti20 || 20 || cti20 || no registration
|-
|      || || || IP200A-10-2e-2e || phone registered
|-
| CTI30 || cti30 || 30 || cti30 || no registration
|-
|      || || || IP200A-10-38-51 || phone registered
|-
| Always-Busy || Always-Busy|| 90 || cti10 || no CTI-capable device.  This user is will reject all incoming calls with a ''user busy'' cause code
|-
| Amt || amt|| 0 || amt || simulated trunk line.  Access number <code>+49 7031 73009</code>
|}
Here is the corresponding PBX user list:
[[Image:cti-test-pbx-03.png]]
With a V8 TSP with ''Map PBX Devices to Lines'' enabled, your choice of available TAPI lines looks like this:
[[Image:cti-test-pbx-04.png]]
With a V7 TSP or with a V8 TSP with ''Map PBX Devices to Lines'' disabled, your choice of available TAPI lines looks like this:
[[Image:cti-test-pbx-05.png]]
== Firmware ==
The PBX currently runs ''V8.00 hotfix5'' but will be update to the then-current version once in a while.  Please  note that although this is a version 8 firmware you can run wsdl501, wsdl700  and wsdl800 based SOAP applications against it (that is, V5, V7 or V8 TSP).
== Monitoring CTI Scenarions ==
There are 2 places which are useful to see what is going on.
A) The PBX calls screen.  Click on ''Administration / PBX / Calls'' to see a real time view of current calls:
[[Image:cti-test-pbx-06.png]]
B) A more precise picture can be obtained using the log screen.  Click on ''Administration / Diagnostic / Logging'' to get to the log screen. The click on ''syslog'' to see a listing of all call events in your test scenario:
[[Image:cti-test-pbx-07.png]]






[[Category:Sample|{{PAGENAME}}]]
[[Category:Sample|{{PAGENAME}}]]

Revision as of 15:00, 13 August 2010

innovaphone provides a CTI Test PBX. This system allows partners to do a quick test of their CTI software easily without the need to set up their own system.

Access

The CTI Test PBX is available at | 145.253.157.158 .

To view the PBX administration user interface, use the viewer account

User: viewer
Password: viewer

To access SOAP, use the _TAPI_ user

User: _TAPI_
Password: soap


Here is how your TAPI configuration should look like:

Cti-test-pbx-01.png


To look at the PBX's administration user interface, open | 145.253.157.158 in your browser and user viewer as both user name and password when you are asked for:

Cti-test-pbx-02.png


Available Users / Lines

The following users are available for CTI:

User Short Name Extension Device Remark
CTI10 cti10 10 cti10 no registration
IP200A-10-06-bb phone registered
CTI20 cti20 20 cti20 no registration
IP200A-10-2e-2e phone registered
CTI30 cti30 30 cti30 no registration
IP200A-10-38-51 phone registered
Always-Busy Always-Busy 90 cti10 no CTI-capable device. This user is will reject all incoming calls with a user busy cause code
Amt amt 0 amt simulated trunk line. Access number +49 7031 73009

Here is the corresponding PBX user list:

Cti-test-pbx-03.png


With a V8 TSP with Map PBX Devices to Lines enabled, your choice of available TAPI lines looks like this:

Cti-test-pbx-04.png


With a V7 TSP or with a V8 TSP with Map PBX Devices to Lines disabled, your choice of available TAPI lines looks like this:

Cti-test-pbx-05.png


Firmware

The PBX currently runs V8.00 hotfix5 but will be update to the then-current version once in a while. Please note that although this is a version 8 firmware you can run wsdl501, wsdl700 and wsdl800 based SOAP applications against it (that is, V5, V7 or V8 TSP).

Monitoring CTI Scenarions

There are 2 places which are useful to see what is going on.

A) The PBX calls screen. Click on Administration / PBX / Calls to see a real time view of current calls:

Cti-test-pbx-06.png



B) A more precise picture can be obtained using the log screen. Click on Administration / Diagnostic / Logging to get to the log screen. The click on syslog to see a listing of all call events in your test scenario:

Cti-test-pbx-07.png