Howto:CTI Remote Test PBX

From innovaphone-wiki

Revision as of 16:01, 13 August 2010 by Ckl (Talk | contribs)
Jump to: navigation, search

innovaphone provides a CTI Test PBX. This system allows partners to do a quick test of their CTI software easily without the need to set up their own system.

Contents

Access

The CTI Test PBX is available at 145.253.157.158 .

To view the PBX administration user interface, use the viewer account

User: viewer
Password: viewer

To access SOAP, use the _TAPI_ user

User: _TAPI_
Password: soap


Here is how your TAPI configuration should look like:

Image:cti-test-pbx-01.png


To look at the PBX's administration user interface, open 145.253.157.158 in your browser and use viewer as both user name and password when you are asked for:

Image:cti-test-pbx-02.png

Available Users / Lines

The following users are available for CTI:

User Short Name Extension Device Remark
CTI10 cti10 10 cti10 no registration
IP200A-10-06-bb phone registered
CTI20 cti20 20 cti20 no registration
IP200A-10-2e-2e phone registered
CTI30 cti30 30 cti30 no registration
IP200A-10-38-51 phone registered
Always-Busy Always-Busy 90 cti10 no CTI-capable device. This user is will reject all incoming calls with a user busy cause code
Amt amt 0 amt simulated trunk line. Access number +49 7031 73009

Here is the corresponding PBX user list:

Image:cti-test-pbx-03.png


With a V8 TSP with Map PBX Devices to Lines enabled, your choice of available TAPI lines looks like this:

Image:cti-test-pbx-04.png


With a V7 TSP or with a V8 TSP with Map PBX Devices to Lines disabled, your choice of available TAPI lines looks like this:

Image:cti-test-pbx-05.png


Firmware

The PBX currently runs V8.00 hotfix5 but will be update to the then-current version once in a while. Please note that although this is a version 8 firmware you can run wsdl501, wsdl700 and wsdl800 based SOAP applications against it (that is, V5, V7 or V8 TSP).

Monitoring CTI Scenarions

There are 2 places which are useful to see what is going on.

A) The PBX calls screen. Click on Administration / PBX / Calls to see a real time view of current calls:

Image:cti-test-pbx-06.png



B) A more precise picture can be obtained using the log screen. Click on Administration / Diagnostic / Logging to get to the log screen. The click on syslog to see a listing of all call events in your test scenario:

Image:cti-test-pbx-07.png

Personal tools