Howto:DHSG pin assignment

From innovaphone wiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.


Here is the pin assignment for the DHSG headset interface. This interface is standardized, so it will be identical for all DHSG phones, not only the IP230. You should be able thus to obtain a proper adapter cable from your headset manufacturer, even if there is not adapter for the IP230 listed.

DHSG uses an 8/8 RJ45 plug.

Assignement:

  • pin 1 - bus send
  • pin 2 - 0V
  • pin 3 - microphone
  • pin 4 - speaker
  • pin 5 - speaker
  • pin 6 - microphone (+)
  • pin 7 - DC in
  • pin 8 - bus recv

to connect a non-electronic-hook-switch, only pins 3 to 6 are relevant.