Howto:MXP T150 - Tandberg - H.323 Testreport

From innovaphone wiki
Jump to navigation Jump to search

Summary

The device should register with SIP (refer to the SIP Test Report) at the innovaphone PBX, as with H.323 no call transfer is possible. Calls between T150 phones will work fine then, provided (as of now unreleased) V7 firmware is used on the PBX (see Version below). Calls between innovaphone devices and T150 are unreliable.

Version

T150 - Firmware Version:

L4.2, Security

T150 - Hardware Version:

38A02282

innovaphone IP800 - Firmware Version:

V7(08-70015)

Current test state

The tests for this product have been completed.

Testing of this product has been finalized March 20th, 2008.

Testing Enviroment

Scenario: Tandberg only phone equipment

MXP T150 - Tandberg - H.323 Testreport 1.PNG

Device Setup

Tested feature Result
Register Device w/o specific configuration (requires DHCP, GK detection and “magic” alias) No
DHCP is default Yes
DHCP works Yes
DHCP yields timeserver and time displays correctly Yes
SNTP config has TZ string for timezone/dst autoconfig No
DHCP yields correct default gateway Yes
Device supports magic registration (e.g. by serial) No
GK discovery works Yes
Fixed GK registrations works No
Registrations supports GK-ID No
Device registers w/o Extension (just by name) Yes
Device registers by extension Yes
Device registers with H.235 password Yes, but no calls possible
Device registers multiple identities No

Test Results

Basic Call

Tested feature Result
video call Yes
call using g711a Yes
call using g711u Yes
call using g723 No
call using g729 No
Overlapped sending No
early media channel No
Fax using T.38 N/A
CGPN can be supressed No
Reverse Media Negotiaton No
Voice Quality OK? Yes


DTMF

Tested feature Result
DTMF tones sent correctly Yes
DTMF tones received correctly Yes
Device switches to DTMF mode automatically after connect Yes

Hold/Retrieve

Tested feature Result
Call can be put on hold Yes, but sometimes without MoH
Held end hears music on hold / announcement from PBX Yes
Call returns to transferring device if the third Endpoint is not available ?

Transfer with consultation

Tested feature Result
Call can be transfered No
Held end hears music on hold No
Call returns to transferring device if the third Endpoint is not available No

Transfer with consultation (alerting only)

Tested feature Result
Call can be transfered No
Held end hears music on hold or dialing tone No
Call returns to transferring device if the third Endpoint is not available No



Related Articles