Howto:Make calls using phones web interface
Jump to navigation
Jump to search
This article describes telnet commands to initiate calls from phones web interface or telnet command line.
Applies To
This information applies to
- IP110, V6
- IP200, V6
- IP230, V6
- IP72, V6
Obsolete: The commands described in this article are obsolete since Web GUI of the IP-Phones supports starting and dropping of calls since V7. The commands were removed in V9 from firmware.
More Information
To dial a number 35 on phone with IP-Address 192.168.0.1 use telnet or following URL:
http://192.168.0.1/!mod cmd PHONE APP dial 35
Available Commands
dials number, returns handle:
mod cmd PHONE APP dial <nummer>
drop handle:
mod cmd PHONE APP drop <handle>
hookup handle (active or alerting):
mod cmd PHONE APP handle
auto call control, drops active call, hookup alerting, etc.:
mod cmd PHONE APP ctl <handle>
Related Articles
This interface is not meant to create 1st party CTI applications. Rather use SOAP for this.