Howto:Siemens Gigaset S685IP - Siemens -Testreport
Summary
The Siemens Gigaset S685IP DECT phone supports all required innovaphone features and is therefore qualified as recommended product.
The usage of wideband codecs of the phone were tested successfully. The integration of the innovaphone voicemail in the Gigaset solution is possible. The message waiting indication will be displayed on the handsets. The handsets support 3-party conference calls.
Currently, the phones cannot access a LDAP phone book directory. The S685 IP base-station supports up to 2 concurrent VoIP calls.
Certification Status
The tests for this product have been completed.
Testing of this product has been finalized January 11th, 2011.
Version
Firmware Version:
022270000000 / 047.00
EEPROM version:
185
innovaphone Firmware:
v8 HotFix8 (80500.28)
Test Setup
Device Setup
Tested feature | Result |
---|---|
Register Device w/o specific configuration (requires DHCP) | No |
DHCP is default | Yes |
DHCP yields timeserver and time displays correctly | No, set static to public NTP server |
SNTP config has TZ string for timezone/dst autoconfig | No, set static to public NTP server |
DHCP yields correct default gateway | Yes |
Device supports magic registration (e.g. by serial) | No |
Fixed registrations works | Yes |
Device registers w/o Extension (just by name) | Yes |
Device registers by extension | Yes |
Device registers with password | Yes |
Device registers multiple identities | Yes |
Device supports STUN protocol | Yes |
Device sends NAT - keepalive messages | Yes |
Device is compatible with innovaphone's NAT traversal implementation | Yes |
Device refreshes the PBX registration | Yes |
Device supports SIP over TCP | No |
Device supports SRTP | No |
Device supports SIPS (SIP over TLS) | No |
Device supports HTTPS | No |
Device supports VAD (Voice activity detection) | not tested |
Supported menu languages | many, check product specifications. |
3-party conference | Yes |
Test Results
Basic Call
Tested feature | Result |
---|---|
call using g711a | Yes |
call using g711u | Yes |
call using g729 | Yes |
Overlapped sending | No |
Early media channel | Yes |
Device shows called id number | Yes |
Device shows called id name | Yes |
Device shows called id display info | Yes |
Fax using T.38 | N/A |
CGPN can be supressed | Yes |
Reverse Media Negotiaton | Yes |
Device shows CDPN/CGPN on incoming call | Yes |
Device shows CDPN/CGPN on outgoing call | Yes |
Device shows connected number | No |
Device shows diverting number | Yes |
Device supports distinctive ringing | No |
Device supports asymetric codec negotiation | not tested |
Device supports codec renegotiation during a conversation | Yes |
Device shows correct display message in case of busy CDPN | Yes |
Device shows correct display message in case of not existing CDPN | Yes |
Device shows correct display message in case that the call is declined | Yes |
SOAP Call works? | Yes, auto answer possible. |
Long Time Call (>30 min) works? | Yes |
Device supports display updates during call(needed for Directory Search object) | No |
Voice Quality OK? | Yes |
DTMF
Tested feature | Result |
---|---|
DTMF tones sent correctly | Yes |
DTMF tones received correctly | Yes |
Hold/Retrieve
Tested feature | Result |
---|---|
Device handles incoming hold correctly | Yes |
Device can put a call on hold using correctly(inactive or sendonly) | Yes (not by R-key but by menu option) |
Transfer with consultation
Tested feature | Voice Ok? | MoH Ok? |
---|---|---|
inno1 calls inno2. inno2 transfers to testphone. | Yes | Yes |
inno1 calls inno2. inno1 transfers to testphone. | Yes | Yes |
inno1 calls testphone. inno1 transfers to inno2. | Yes | Yes |
inno1 calls testphone. testphone transfers to inno2. | Yes | Yes |
testphone calls inno1. inno1 transfers to inno2. | Yes | Yes |
testphone calls inno1. testphone transfers to inno2. | Yes | Yes |
Transfer with consultation (alerting only)
Tested feature | Voice Ok? | MoH Ok? |
---|---|---|
inno1 calls inno2. inno2 transfers to testphone. | Yes | Yes |
inno1 calls inno2. inno1 transfers to testphone. | Yes | Yes |
inno1 calls testphone. inno1 transfers to inno2. | Yes | Yes |
inno1 calls testphone. testphone transfers to inno2. | Yes | Yes |
testphone calls inno1. inno1 transfers to inno2. | Yes | Yes |
testphone calls inno1. testphone transfers to inno2. | Yes | Yes |
Blind Transfer
Tested feature | Voice Ok? |
---|---|
inno1 calls inno2. inno2 transfers to testphone. | Yes |
inno1 calls inno2. inno1 transfers to testphone. | Yes |
inno1 calls testphone. inno1 transfers to inno2. | Yes |
inno1 calls testphone. testphone transfers to inno2. | No |
testphone calls inno1. inno1 transfers to inno2. | Yes |
testphone calls inno1. testphone transfers to inno2. | No |
Blind Transfer (alerting only)
Tested feature | Voice Ok? |
---|---|
inno1 calls inno2. inno2 transfers to testphone. | Yes |
inno1 calls testphone. testphone transfers to inno2. | No |
testphone calls inno1. inno1 transfers to inno2. | Yes |
Broadcast Group & Waiting Queue
Tested feature | Result |
---|---|
testphone makes call to a Broadcast Group. inno1 picks up. | Yes |
inno1 makes call to a Broadcast Group. testphone picks up. | Yes |
testphone makes call to a Waiting Queue. inno1 picks up before announcement is played. | Yes |
testphone makes call to a Waiting Queue. inno1 picks up after announcement is played. | Yes |
inno1 makes call to a Waiting Queue. testphone picks up. | Yes |
Other Features
Directory
Tested feature | Result |
---|---|
Device built-in directory | not possible to connect to a LDAP phonebook(Estos Metadir) |
Exists | Yes, only local |
Can be dialled from | Yes |
Does CLI resolution | Yes |
Hands free
Tested feature | Result |
---|---|
Loudspeaker operation works fine | Yes |
Hands free works fine | Yes |
Volume adjustable during call | Yes |
Keys
Tested feature | Result |
---|---|
Device has speed dial keys | Yes |
Device has programmable function keys | Yes |
Device has partner keys | No |
Configuration
innovaphone configuration
Add a new PBX object of type "user":
3rd party product configuration
Telephony Connection
First you have to create a registration from the DECT/IP base-station to the PBX. Go to Telephony->Connections and edit the first entry.
Click on Select Provider and choose your country and innovaphonePBX. This will ensure that all settings are configured correctly.
The device still needs the IP address of the PBX to register at and the name of the user for whom the registration shall be made. Click on Show advanced settings in order to enter as Domain name the IP address of your innovaphone PBX.
Please note that the registration credentials configured at the Gigaset phone use the number of the corresponding PBX object, not its name. Registration by using the name is also possible, but will result in CGPN display problems when making calls from the Gigaset phone to a mobility enabled user.
Number Assignment
If you have more than one DECT handset registered to your base-station, you can use the Telephony->Number Assignment menu to assign a DECT handset to a specific PBX registration.
Voicemail
To get the current voicemail status displayed on your DECT handset, you have to enter the corresponding innovaphone voicemail number in the Telephony->Network Mailbox menu.