Howto:Switzerland - Swisscom Business Connect - SIP Provider(2015)

From innovaphone wiki
Revision as of 16:11, 25 August 2020 by Vsc (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
3rdPartyGoldfischglas 03.png
Swisscom logo.png

Product Name

Business Connect

Current test state

Important note:

The SIP provider test described in this article covers the product Swisscom Business Connect and was valid till 2015.

Currently (2016), Swisscom offers a new product called Swisscom Smart Business Connect.

In spite of the similar product name, prerequsities in terms of used hardware provided by Swisscom have changed.

innovaphone currently is in certification process for the new product.


Recprod.PNG The tests for this product have been completed and it has been approved as a recommended product (Certification document).

Testing of this product has been finalized February, 2015.

Category

All SIP Telephony Provider (i.e. Carrier)

Version

V11

Vendor

swisscom

Summary

SIP Provider: swisscom Business Connect

The provider supports all mandatory innovaphone features and is therefore qualified as recommended SIP Provider.

That being said, the provider has achieved 86,34% of all possible test points (139 of 161). For more information on the test rating, please refer to Test Description V11 and later


Please Note, that some features are restricted or not supported by swisscom

  • Fax over IP is on principle not supported by swisscom
    • The T.38 feature is not available
    • Fax via G.711 (T.38 to G.711 / Audio Fax support) is not supported by swisscom but should work in most scenarios. This Feature is not guaranteed!
  • Only G.711a is supported, no other codecs are supported
  • Overlapped Sending is not supported
  • NAT Detection is not supported
  • Redundancy Mechanism are not supported
  • SIP over TCP is not supported
  • Incoming Early Media Channel is not supported by default and must be requestet to swisscom.
  • CLIP no screening does not work for "Trunk loop Connections". This means, if you dial out to the PSTN and back to your own Trunk Number, CLNS does not work.


swisscom doesn't support "Reverse Media negotiation". Because of this, "Media-Relay" and an "Exclusive Coder Setting" must be configured. In contrast to a SIP trunk which does not need Media-Relay, the transport of all RTP packets across the gateway will result in a higher CPU load.

In order to use some Features like Clip no screening, some configuration must be done.

Supported Features:

  • Direct Dial In
  • DTMF
  • CGPN can be suppressed
  • CLIP No Screening
  • Reverse Media Negotiation
  • Hold/Retrieve
  • Blind Transfer

Supported Codecs:

  • G.711a only


swisscom Test-report

Contact

For further informations on this test, please contact swisscom.

Retrieved from "https://wiki.innovaphone.com/index.php?title=Howto:Switzerland_-_Swisscom_Business_Connect_-_SIP_Provider(2015)&oldid=56983"