Howto13r1:Firewall Settings

Applies To

This information applies to

V13 and up

More Information

Here we would like to give an overview of the necessary ports and protocols for a reverse proxy in a DMZ.

The scenario would be that a reverse proxy is used in a DMZ. The DMZ has a link to the WAN and LAN.

Configuration

• Before you can setup your Firewall you have to read the book Reverse Proxy in the V13 IT Connect Training.
• You can see the full visual presentation in the book of the V12 Reverse Proxy Lesson.

WAN ⇒ DMZ (Reverse Proxy)	DMZ (Reverse Proxy) ⇒ inside (PBX)	DMZ (Reverse Proxy) ⇒ inside (Application Platform)	inside ⇒ DMZ (Reverse Proxy)	DMZ (Reverse Proxy) ⇒ WAN
STUN/TURN (udp/tcp/3478)	/	/	STUN/TURN (udp/tcp/3478)	/
LDAPS (tcp/636) • optionally LDAP (tcp/389) if you need plaintext • needed if you want offer LDAP lookups	LDAPS (tcp/636) • optionally LDAP (tcp/389) if you need plaintext • needed if you want offer LDAP lookups	LDAPS (tcp/636) • optionally LDAP (tcp/389) if you need plaintext • needed if you want offer LDAP lookups	/	/
HTTPS (tcp/443) • optionally HTTP (tcp/80) if you need plaintext • needed if you want offer myApps • please also allow wss/ws (websocket) connections	HTTPS (tcp/443) • optionally HTTP (tcp/80) if you need plaintext • needed if you want offer myApps • please also allow wss/ws (websocket) connections	HTTPS (tcp/443) • optionally HTTP (tcp/80) if you need plaintext • needed if you want offer myApps • please also allow wss/ws (websocket) connections	HTTPS (tcp/<your custom port>) • Advanced UI admin access	/
H.323 (tcp/1300) • optionally HTTP (tcp/1720) if you need plaintext • needed if you want offer Phone registrations	H.323 (tcp/1300) • optionally HTTP (tcp/1720) if you need plaintext • needed if you want offer Phone registrations	/	/	/
SIPS (tcp/5061) • optionally LDAP (tcp/5060) if you need plaintext • needed only if you want to accept SIP registers	SIPS (tcp/5061) • optionally LDAP (tcp/5060) if you need plaintext • needed only if you want to accept SIP registers	/	/	SIPS (tcp/5061) • optionally LDAP (tcp/5060) if you need plaintext • needed if you want to register a SIP Trunk from the RP to Provider and your Provider doesn't Support TURN
/	/	/	RTP (udp/16384-32767) • needed if you want to register a SIP Trunk from the RP to Provider and your Provider doesn't Support TURN	RTP (udp/16384-32767) • needed if you want to register a SIP Trunk from the RP to Provider and your Provider doesn't Support TURN

Related Articles

• Course13:IT_Connect_-_10.0_Reverse_Proxy
• Course12:Advanced_-_Reverse_Proxy