IP302 Technical Data

From innovaphone wiki
Revision as of 16:24, 3 April 2017 by Vsc (talk | contribs)
Jump to navigation Jump to search

innovaphone® AG | Umberto-Nobile-Str. 15 | 71063 Sindelfingen | Germany | T +49 7031 73009-0 | F +49 7031 73009-9 | info@innovaphone.com | www.innovaphone.com
Errors, delivery times and technical specifications may be subject to change. Copyright © 2023 innovaphone® AG

Illustration

IP302.png

Datasheet

innovaphone IP302

VoIP gateway for one ISDN BRI interface and platform for innovaphone PBX

Housing

Size: 210 x 134 x 32 mm 1 HE for 19” systems

Weight: 680 g

Interfaces

1 x ISDN BRI: TE and NT mode for trunk interface

2 x analog interface international RJ-11 (2 x LEDs for Link), FXS

2 x Ethernet: RJ 45 interface 10/100-BASE-TX (auto negotiation), Power over Ethernet (802.3af, Class 3)

Slot for one Compact Flash Card Type I

Hardware

Power supply:

Power over Ethernet (802.3af, Class 3) or external power supply

Power Consumption: see wiki-article „HowTo:Power Consumption“

Digital Signal Processor (DSP) for codecs up to 4 voice channels

2 HDLC channels

125 MHz CPU, 32 MB RAM (since HW 307, before 16 MB), 8 MB Flash

Operation temperature: 0 °C to +45 °C

Humidity: 10% to 90% (not condensed)

Storage temperature: -10 °C to +70 °C

innovaphone PBX

Platform for up to 50 registrations resp. 15 myPBX clients

1 fax interface channel

VoIP protocols

H.323 Version 5

H.323 over UDP, TCP, TLS

SIP Version 2 conform RFC 3261

SIP over UDP, TCP, TLS

RTP, SRTP, RTCP

T.38 (Fax, supported rates 9.6k and 14.4k)

Voice Codecs

G.711 A-law / µ-law, G.723.1 (53), G.729A

VAD (Voice Activity Detection), CNG (Comfort Noise Generation)

Dynamic Jitter Buffering

Echo Compensation according to G.168

Data modem support

Network

PPPoE, manual or automatic connection after boot

PPTP Tunneling up to 32 tunnels simultaneously, encoding via MPPE

NAT, H.323-NAT

RSTP, IEEE 802.1x

VLAN-ID acc. to IEEE 802.1q

DHCP and LLDP/MED support

NTP support

ISDN

Routing VOIP-ISDN, ISDN-ISDN, VOIP-VOIP

Automatic dial tone European and US Standard

ENUM for H.323 and SIP protocols

Plays recorded messages deposed on CF card or on a web server

Protocols EDSS1, QSIG

Administration

Password protected administration via web-browser, Kerberos server

Log and trace files, Display of interface and connection status, Ping – connection test for Internet Protocol, Sending SNMP Traps

Save and reload config files, Boot code and firmware update via HTML upload, Automatic update via update server

Order number

01-00302-001

Datenblatt

innovaphone IP302

VoIP-Gateway mit einer ISDN S0-Schnittstelle und Plattform für die innovaphone PBX

Gehäuse

Abmessungen: 210 x 134 x 32 mm eine Höheneinheit für 19“ Systeme

Gewicht: 680 g

Schnittstellen

2 x a/b Schnittstellen (FXS): für einen Anschluss von jeweils einem RJ-11 Stecker pro analogem Kanal

1 x S0-Schnittstelle: im TE oder NT-Modus für Anschluss an die Amtsleitungen

2 x Ethernet: RJ 45 Schnittstelle 10/100-BASE-TX (auto negotiation) mit „Power over Ethernet“ nach 802.3af, Class 3

Aufnahmeschacht für eine Compact Flash-Karte Typ I

Hardware

Stromversorgung:

Power over Ethernet nach 802.3af, Class 3 oder Steckernetzteil

Leistungsaufnahme: siehe Wiki-Artikel „HowTo:Power Consumption“

Digital Signal Processor (DSP) für Sprachverarbeitung bis zu 4 Kanäle

2 HDLC Kanäle

125 MHz CPU, 32 MB RAM (seit HW 307, davor 16 MB), 8 MB Flash

Betriebstemperatur: 0 °C bis +45 °C

Luftfeuchtigkeit: 10% bis 90% (nicht kondensierend)

Lagertemperatur: -10 °C bis +70 °C

innovaphone PBX

Plattform für bis zu 50 Registrierungen resp. 15 myPBX Nutzer

1 Faxkanal

VoIP-Protokolle

H.323 Version 5

H.323 über UDP, TCP, TLS

SIP Version 2 konform RFC 3261

SIP über UDP, TCP, TLS

RTP, SRTP, RTCP

T.38 (Fax, unterstützte Raten 9.6k und 14.4k)

Sprach-Codecs

G.711 A-law / µ-law, G723.1 (53), G.729A

VAD (Voice Activity Detection), CNG (Comfort Noise Generation)

Dynamic Jitter Buffering

Echo Kompensation nach G.168

Modemunterstützung

Netzwerk

PPPoE-Protokoll, manueller / automatischer Verbindungsaufbau nach Start

PPTP bis zu 32 Tunnel parallel, Verschlüsselung mit MPPE

NAT, H.323-NAT

RSTP, IEEE 802.1x

VLAN-ID nach IEEE 802.1q

DHCP und LLDP/MED Unterstützung

NTP Unterstützung

ISDN

Routing VOIP-ISDN, ISDN-ISDN, VOIP-VOIP

Automatische Rufton-Generierung nach Europäischem- und US-Standard

ENUM für H.323 und SIP Einträge

Einspielen von Ansagen, die als Datei auf CF-Karte oder einem Webserver hinterlegt sind

Protokolle EDSS1, QSIG

Administration

Passwortgeschützter Zugriff über Web-Browser, Kerberos-Server

Log- und Trace-Dateien, Statusanzeigen

Ping – Verbindungstest, Senden von SNMP-Traps

Speichern und Einlesen der Konfiguration, Aktualisierung Boot-Code und Firmware über HTML-Upload, Automatische Aktualisierung über Update-Server

Bestellnummer

01-00302-001

CE-Declarations

Conformities

Applies to IP22, IP24, IP28, IP302, IP305:

  • EN 55022/AC:2011-10
  • EN 55024:2010-11
  • EN 60950-1:2006-04 + A1:2010-03 + A11:2009-03 + A12:2011-02

Applies to IP800, IP810, IP0010, IP1060, IP3010:

  • EN 55022/AC:2011-10
  • EN 55024:2010-11
  • EN 60950-1:2006-04 + A1:2010-03 + A11:2009-03 + A12:2011-02
  • EN 60950-1:2001 (IP800 only)
  • EN 61000-3-2:2000 (IP800 only)
  • EN 61000-3-3:1995 + A1:2001 (IP800 only)

WEEE-Number

innovaphone WEEE-Number

DE 31703754