Datasheet IPVA

innovaphone IPVA

Virtual communication platform

Interfaces

Max. 2 ETH ports supported

ISDN-connectivity with any optional ISDN-capable innovaphone gateway

Hardware

Hardware independent; Support for VMWare, Hyper-V and selected KVM/QEMU hypervisors

System requirements (usecase dependent):

CPU: 2.66 GHz (single core used only)

RAM usage: min. 256 MB recommended (since 12r2sr27/13r1sr5), max. 3 GB

default HDD usage: 1 GB

Soft Conferencing (without DSP) for up to 100 voice / conference channels G.711a/u-law

Channels for the innovaphone faxserver using T.38.

virtual innovaphone PBX

Operated directly on VMWare, Hyper-V or selected KVM/QEMU hypervisors

Platform for up to 8000 registrations

Installation time less than 5 minutes

System startup time 5 seconds

Use cases

Hosting platform – several PBX using the same HW, customer separation

Seamless scalable – ranging from entry level platform for SMEs to large enterprises

Managed services

Voice Codecs

G.711 A-law / µ-law

VoIP Protocols

H.323 Version 5, including proprietary extensions

H.323 over UDP, TCP, TLS 1.3

SIP Version 2, conform RFC 3261

SIP over UDP, TCP, TLS

RTP, SRTP (SDES, DTLS 1.2), RTCP, ICE

T.38 Fax (supported rates 9.6k and 14.4k) incl. fallback to G.711 (device dependent)

ISDN protocols

valid for gateways including S0/S2M interfaces

Euro ISDN D-channel protocol (E-DSS1)

QSIG D-channel protocols: ECMA1, ECMA2

US D-channel protocols: USA-National-ISDN-1, USA-5ESS, USA-DMS100

Connection modes: Point-to-Point (PtP), Point-to-Multipoint (PtMP)

S0: up to 2 speech channels per interface

S20 E1/T1: up to 30/23 ISDN-speech channels per interface

Operation mode TE/NT adjustable per interface

myApps Application Platform

Universal application platform

Can be operated on gateway models xx11, 11xx (not 1130) and xx13 or as a virtual solution

Provides applications for system administration and UCC client operation.

Excerpt of available applications

System Administration

Devices app
Users Admin app
Contacts app
Reporting app
Alarm app and Event app
Files app
Calendar app
innovaphone App Store
Control/access via UCC client myApps

UCC client myApps (PBX based)

Phone app and Softphone app (PBX function)
Call List app
Chat app
Fax app
Voicemail app
Phone book access system/external/Outlook
Supported OS: Windows, MacOS, iOS, Android or WebClient

Network

IPv4/IPv6 Support (not myApps-ApplicationPlatform)

NAT, H.323-NAT, STUN, TURN over UDP/TCP

RSTP, EAP-TLS/EAP-MD5 acc. to IEEE 802.1X

LDAP/S support

DHCP support

NTP support

VLAN-ID acc. to IEEE 802.1Q

LLDP support for VLAN configuration

PPPoE, manual or automatic connection after boot

PPTP Tunneling up to 32 tunnels simultaneously, encoding via MPPE

Reverse Proxy, various SBC-functionalities (IPxx11/IPxx13/11xx recommended)

Administration

Password protected administration access via web-browser, optional two-factor authentication

Store and restore configuration files

System-wide automatic upgrade of firmware and configuration data via the myApps Devices app

Automatic ping connection test

Display of interface and connection status

Generation of log and trace files and SNMP.V3-traps

Device-specific licences

Depending on the model, additional PBX channels licences (02-00020-007) for soft conferencing can be extended.

Conformities

see separate information sheet

Order Number IPVA license (for each port license used): 02-00043-002