Reference12r1:IP4/General/STUN: Difference between revisions

From innovaphone wiki
Jump to navigation Jump to search
 
Line 18: Line 18:
==TURN Password==
==TURN Password==
The password for communication with the TURN server.
The password for communication with the TURN server.
== Known Issues ==
Note: In v12r1 and higher version it's no longer necessary to enable NAT for the STUN/TURN services be enabled. If NAT it's disable make sure the UDP-NAT port range values are also deleted / not set.

Latest revision as of 09:53, 19 April 2017

STUN Servers

The default STUN servers that should be used on a box by ICE and SIP, if no configuration is given at the individual registrations. The field must contain a string in the following format:

  • up to two STUN servers which shall be queried in parallel, separated by semi-colon (;)

Each STUN server is denoted as

  • either a single DNS name and an optional port (e.g. stun.example.com:1234)
  • or a comma separated list of one or two IP addresses and optional ports (e.g. 172.16.13.1:1234,172.16.13.2)

<br\> This format is also used for the STUN server configuration in the DHCP innovaphone Vendor Option 219 .

TURN Servers

You can configure up to one TURN server in one of the following formats.

  • either a single DNS name and an optional port (e.g. turn.example.com:1234)
  • or a comma separated list of one or two IP addresses and optional ports (e.g. 172.16.13.1:1234,172.16.13.2)

TURN Username

The user name for communication with the TURN server.

TURN Password

The password for communication with the TURN server.