Reference12r2:IP6/ETH/Server

From innovaphone-wiki

Jump to: navigation, search

Contents

Offer Parameters:

All settings marked with a "*" are innovaphone vendor-specific settings recognized only by innovaphone devices.

DHCP6 Options

DNS Server Adresses: Comma separated list of DNS server IP6 addresses
DNS Server Domains: Comma separated list of domain names that client should use when resolving hostnames via DNS
SIP Server Adresses: Comma separated list of SIP server IP6 ddresses
SIP Server Domains: Comma separated list of SIP server domain names
SNTP Server Adresses: Comma separated list of SNTP server IP6 addresses
NTP Servers: Comma separated list of IP6 NTP server addresses or multicast addresses or domain names
POSIX Timezone String: Timezone definition according to IEEE Std 1003.1 (POSIX)


General Innovaphone Options

Primary Gatekeeper *: Address or domain name of primary H.323 gatekeeper
Secondary Gatekeeper *: Address or domain name of secondary H.323 gatekeeper
Gatekeeper Identifier *: H.323 Gatekeeper ID
SIP Proxy *: Address or domain name of primary SIP proxy server
Alternate SIP Proxy *: Comma separated list of alternate SIP proxy server addresses and/or domain names
VoIP Protocol *: The VoIP Protocl to be used for the Primary Registration (User-1), one of:

H.323, H.323/TCP, H.323/TLS, SIP/UDP, SIP/TCP, SIP/TLS

Coder *: Coder preferences for VoIP telephones. You get additional information's in this article Reference12r2:DHCP client
Dial Tones *: Dialtone index (numeric, from phones 'config change PHONE SIG /tones')
Enblock Dialling Timeout [s] *: Switches on enbloc dialling for VoIP telephones.
Faststart [0|1] *: Faststart 0/1 turns off/on the H.323 Faststart procedure. If this option is not defined the default (on) applies.
Tunneling [0|1] *: Tunneling 0/1 turns off/on the H.245 Tunneling procedure. If this option is not defined the default (on) applies.
Language *: The language to be used as default language on a VoIP Telefone, one of the shorthands:
Shorthand Language
ger Deutsch
eng English
frn Française
dut Nederlands
ita Italiano
esp Español
swe Svenska
dan Dansk
nor Norsk
fin Suomi
cze Cestina
est Eesti
por Português
lat Latvieðu
cro Hrvatski
pol Polski
rus Русский
slo Slovenija
hun Magyar
Dialling Location *: Defines the various PBX access numbers on VoIP telephones for directory access. This character string must contain /cc, /ac, /ntp, /itp, /col and /pbx options. The "Max Internal Number Length" is optional and coded with the tag /len. A valid string may look like this one: /cc 49 /ac 7031 /ntp 0 /itp 00 /col 0 /pbx 7 /len 3.
AM/PM Clock [0|1] *: Enables/disables the English time format for VoIP telephones. The German time format is displayed as standard: "dd.mm.yy hh:mm, 24-hour clock." If a 1 is entered in this field, the English time format "mm/dd hh:mm xm, 12-hour am/pm clock" is displayed.
Timezone String *: Timezone definition according to IEEE Std 1003.1 (POSIX)
NTP Update Interval [min] *: Period in minutes to poll the time server
LDAP Directory *: To allocate a functioning LDAP configuration to all VoIP devices integrated via DHCP, a configuration character string can be entered in the LDAP Directory field. You obtain this configuration character string by executing the following command in the browser of a configured device: "<IP-Adresse of the VoIP device>/!mod cmd PHONE/DIR ldap-config". When this command has been executed, a configuration character string is output in the browser, which you copy and paste into the LDAP Directory field of the DHCP server. In this way, all further devices are given a correct LDAP configuration.
Update Server URL *: All devices integrated via DHCP are assigned the URL specified here (for example, http://192.168.1.2/update/script.htm) in the Command File URL field of the update server (see chapter entitled "Services/Update"). An automated update of the devices is thereby ensured.
Update Interval [min] *: All devices integrated via DHCP are assigned the interval specified here in the Interval [min] field of the update server (see chapter entitled "Services/Update").
802.1q VLAN ID *: The configuration at the switch must be observed for setting the VLAN ID. An empty 802.1q VLAN ID field (16 bit) assumes the value 0. The VLAN ID with the value 0 switches QoS (Quality of Service) off according to 802.1q ab. If the switch at the port to the innovaphone device happens to be configured to a different VLAN ID, the same value must be specified here to allow a prioritisation from the Ethernet. To be able to distinguish between the VLANs, the Ethernet packet is extended by 4 bytes, of which 12 bits are intended for the inclusion of the VLAN ID, making 4094 VLANs possible (VLAN ID 0 and 4095 are reserved or invalid).
802.1p VLAN Priority *: In the 802.1p VLAN Priority field (3 bit), the associated VLAN priority level (a value between 0 and 7) can be specified, in order that voice data is given priority forwarding, for example.
NTP Server *: Comma separated list of NTP server addresses and/or domain names
DNS Server *: Comma separated list of DNS server addresses
Domain List *: Comma separated list of list of domain names to use when resolving hostnames


Innovaphone IPv4 only Options

Primary Gatekeeper Address *: IP4 address of primary H.323 gatekeeper (required by pre V12r2 clients)
Secondary Gatekeeper Address *: IP4 address of secondary H.323 gatekeeper (required by pre V12r2 clients)
Local Networks *: List of local networks in form of comma separated Address:Mask pairs (for example, 192.168.1.0:255.255.255.0,192.168.2.0:255.255.255.0). For VoIP Calls that end up in a local network the device will try to use the coder preferred for the local network (as provided in the Coder option or defined locally).
TOS Priority *: Two comma separated 8 bit values for the TOS/DSCP field in the IP header of UDP-RTP and TCP-signalling packets (Bit 0..2 'precedence', bit 3..6 'type of service'). The default for RTP packets is 0xb8 (RFC 3246 - Expedited Forwarding), for signalling packets it is 0x68 (RFC 3246 - Assured Forwarding). 0xb8,0x68 for example define the default values.
STUN Server *: See Reference12r2:IP4/General/STUN for the format.
TURN Server *: See Reference12r2:IP4/General/STUN for the format.
NAT Detection Interval [min] *: Interval between checks for NAT type


Related Articles

Personal tools