Reference8:Administration/PBX/Objects/Edit Forks

From innovaphone wiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

With this page call forking can be configured for a user. This means a call for this user is not only sent to endpoints registered to the user object, but also to the forking destination (No/Name). If a mobility object is configured for the forking, the phone identified by the forking destination can use the mobility functions. A delay can be configured for the call to the mobile endpoint. This delay is not supported for normal call forking without mobility functions.

Operator calls from a waiting queue are not sent to forking destinations.

Properties of Mobility

For the function of the Mobility features a Mobility license must be installed.

Object The Mobility Object (Long Name) must be set, if the mobile endpoint (GSM Phone) needs to use the mobility features .
Device Optional, the Device name of the User can be configured here. This name is used by SOAP (TAPI) to address this device for example when initiating a call.
Delay A Delay in seconds can be configured to call the mobile endpoint
Disable Disabling the Mobility features for the mobile device, this can also be en/disabled via DTMF featurecodes
Call-Waiting Enable or disable call-waiting for the mobile endpoint, if a mobile endpoint is in a call a call waiting tone will be played from the PBX to the mobile endpoint via the RTP stream.
GSM-License When using the innovaphone GSM client a GSM license is needed and need to be activated