Reference9:3pty conference on DECT phones

From innovaphone wiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

This article explains how to configure and use 3pty conference calls on DECT phones.

Applies To

This information applies to

  • all innovaphone DECT devices (IP1200 and IP1202) from V9HF11.

More Information

The innovaphone IP-DECT devices are able to use the innovaphone conference hardware (CONF interface) to establish a 3pty conference call with firmware V9 hotfix 11 or later. If the 3pty conference is started by the user, first the IP-DECT device starts a call to the configured conferencing unit number. If this call connects, the connected number is used to connect the other call parties to the conference call.

Requirements

  • innovaphone IP-DECT device with firmware V9 hotfix 11 or later
  • innovaphone device with CONF interface with support of connected number (V9 and later)

Configuration

  • PBX: The innovaphone CONF interface is registered to a PBX Trunk Line object (or a Gateway object with the Prefix check-mark ticked). The Trunk Line must have a number and be called by the gatekeeper the DECT users are registered.
  • IP-DECT device: The Conferencing Unit Number of the DECT Master is to be set to the Trunk Line number appended by *1# (If Trunk Line is 8, set Conferencing Unit Number to 8*1#).

Usage

To start a conference by a DECT phone use the R-key feature R+3 during a call. You must have at least one inactive call. To stop the conference again use also R+3. R+2 stops the conference and toggles to the last inactive party, or to a waiting call, if present.

Related Articles