Reference9:DECT2/Config/Phone Book

From innovaphone wiki
Jump to navigation Jump to search
There are also other versions of this article available: Reference9 (this version) | Reference13r1

In this menu the LDAP directory to be searched for telephone numbers of remote parties can be configured and enabled.


General settings

  • Introductory Text: This text is added to the message with returned phone book entries. It is not used in all device models. The maximum length is 20 characters.
  • No Search Result Text: This text is used as a response to the portable device when there is no match. It is not used in all device models. The maximum length is 20 characters.
  • Discarded Results Text: This text is added to the message when there are too many matches. It is not used in all device models. The maximum length is 20 characters.
  • Result Format: The format of the displayed entry.
  • Phone Book Number: Number used by the phone to access the phone book, this number shall not conflict with any of the handsets in the system. Important: * and # must not be used in the number, number length must be 6 digits. Please do not change the default value if not necessary. If nevertheless the parameter is changed here, it must be also changed on the DECT handsets (using WinPDM Software, under Systems / System X / PBX Settings / Numbers / Central Phonebook Number ).

PBX

  • Enable: Enable usage of the innovaphone PBX directory.
  • Server: The IP and port of the LDAP server (IP:port).
  • User: User name for authentication at the LDAP server.
  • Password: Password for authentication at the LDAP server.

External LDAP Server

  • Enable: Enable usage of the external LDAP directory.
  • Server: The IP and port of the LDAP server (IP:port).
  • User: User name for authentication at the LDAP server.
  • Password: Password for authentication at the LDAP server.
  • Search Base: The search base for your LDAP query, e.g. dn=base.
  • Search Filter: The search filter for your LDAP query.
  • Search Attributes: The search attributes, which are used to search in, e.g. givenName,sn.
    The IP61 and IP63 have got two search line inputs. The first line is assigned the first search attribute, the second line to the second attribute. To use more than two search attributes the further ones can be appended in the second search line delimited with blanks.
  • Number Attributes: The number attributes, which are returned by queries (optional with a description of the number, e.g. e164: (office),mobile: (mobile)).
  • Display/Sort Attributes: The display attributes, which are returned by queries, used to sort the results and are shown in the search result.

(for name resolution for incoming calls the settings in "LDAP Directory Search" in Reference11r1:DECT2/Config/Master are used)

Dialing Location

The dialing location is an optional setting. If a directory maintains telephone numbers in international form with a leading '+' sign, a mechanism must be available to convert or normalize such a number into a dialable number with all the required prefixes.

  • Country Code: The country code (e.g. 49 for Germany).
  • Area Code: The area code (e.g. 30 for Berlin).
  • National Prefix: The national trunk prefix (0 in Germany).
  • International Prefix: The international trunk prefix (00 in Germany).
  • External Line: The prefix, necessary to access a trunk line. This prefix equals 0 in most PBX configurations.
  • Subscriber Numbers: For the conversion of international numbers to internal extensions, the relevant subscriber numbers (comma-separated) may be configured here (e.g 4321,4322,4323).