Reference9:Interfaces/ETH/VLAN

From innovaphone wiki
Revision as of 18:14, 26 January 2011 by Afi (talk | contribs) (New page: If a network uses several '''VLAN'''s (Virtual Local Area Network), a VLAN can be specified for every Ethernet interface . This ensures that the data packets are transmitted to the specifi...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
There are also other versions of this article available: Reference | Reference9 (this version) | Reference10

If a network uses several VLANs (Virtual Local Area Network), a VLAN can be specified for every Ethernet interface . This ensures that the data packets are transmitted to the specified VLAN only.

ID The ID of the VLAN. The value 0 is applied if the ID entry field is empty. The VLAN ID with the value 0 switches the QoS (Quality of Service) off according to 802.1q.
Priority If the switch at the port to the innovaphone gateway happens to be configured to a different ID, the same value must be entered here to allow the Ethernet packets to be prioritised. A priority value between 0 and 7 is entered here (configuration on the Ethernet switch).
Retrieved from "https://wiki.innovaphone.com/index.php?title=Reference9:Interfaces/ETH/VLAN&oldid=19691"