Reference:Administration/DECT/Master-Calls
Jump to navigation
Jump to search
There are also other versions of this article available:
Reference (this version) | Reference8 | Reference9
Note: This information applies to IP1200
Statistic
Some statistical informations about calls, handovers and the maximum number of calls at the same time.
Call list
The currently active calls carried out via the DECT master can be monitored. Here, it is to be noted that internal calls between innovaphone PBX subscribers are not displayed if the optional innovaphone PBX component is installed.
A | <Sender> | Calling subscriber |
---|---|---|
B | <Receiver> | Called subscriber |
State | Calling Alerting Connected Incomplete Disconnecting |
Call is being set up Call is being signalled Call connected Call incomplete Call is being disconnected |
Radio | IP1200-xx-xx-xx | The DECT system used. |
Local Media | xxx.xxx.xxx.xxx:xxxx | The IP address and port of the DECT system used. |
Remote Media | xxx.xxx.xxx.xxx:xxxx | The IP address and port of the VoIP device on which the innovaphone PBX component is enabled. |