Reference:Configuration/DECT/Master: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
(gpa - Beschreibung zu neuen Menüpunkten ergänzt) |
||
Line 4: | Line 4: | ||
** '''Standby''' switches on the standby function for the DECT master. | ** '''Standby''' switches on the standby function for the DECT master. | ||
** '''Off''' switches off the DECT master function. | ** '''Off''' switches off the DECT master function. | ||
* '''Primary Master IP Address:''' This field is only visible if this device has been set to Standby-Master ('''''Mode'' = ''Standby'''''). The ip-address of the DECT-Master has to be configured here. | |||
* '''GK:''' The IP address of the primary gatekeeper. The device on which the innovaphone PBX component is operated. | * '''GK:''' The IP address of the primary gatekeeper. The device on which the innovaphone PBX component is operated. | ||
* '''Alt GK:''' The IP address of the secondary, alternative gatekeeper. | * '''Alt GK:''' The IP address of the secondary, alternative gatekeeper. | ||
Line 12: | Line 13: | ||
* '''STUN Server:''' STUN server to be used if DECT master has no public ip address and SIP server is outside the local network. | * '''STUN Server:''' STUN server to be used if DECT master has no public ip address and SIP server is outside the local network. | ||
* '''Name for Authentication:''' Some SIP PBXs need authentication name different from the registration id. This enables the number being used as id and the name for authentication. | * '''Name for Authentication:''' Some SIP PBXs need authentication name different from the registration id. This enables the number being used as id and the name for authentication. | ||
* '''Master ID:''' If this device is configured as master, the unique id of it will be configured here. This gives the possibility to register phones on another master pbx. | |||
'''Example:''' | |||
A dect phone dials the number (e.g. 100) of a dect-user object (pbx1, id=1) to register in. | |||
If it exists another user (e.g. 101) on another pbx (pbx2, id=2), this user can get registered now | |||
by dialling '''*<master-id>*101 --> *2*101''' |
Revision as of 12:56, 3 April 2008
It is necessary to configure the operating mode of the DECT system. A gatekeeper must also be specified here, on which the innovaphone PBX component is operated.
- Mode: Active switches on the DECT master function. In every DECT system, there must be a DECT master.
- Standby switches on the standby function for the DECT master.
- Off switches off the DECT master function.
- Primary Master IP Address: This field is only visible if this device has been set to Standby-Master (Mode = Standby). The ip-address of the DECT-Master has to be configured here.
- GK: The IP address of the primary gatekeeper. The device on which the innovaphone PBX component is operated.
- Alt GK: The IP address of the secondary, alternative gatekeeper.
- GK ID: The gatekeeper ID of the gatekeeper to be used.
- Prot: The protocol to be used for the communication. There is a choice between:
- H.323 (RFC 1889), which is the recommended protocol for innovaphone VoIP devices, since it implements most features.
- SIP (RFC 3261).
- STUN Server: STUN server to be used if DECT master has no public ip address and SIP server is outside the local network.
- Name for Authentication: Some SIP PBXs need authentication name different from the registration id. This enables the number being used as id and the name for authentication.
- Master ID: If this device is configured as master, the unique id of it will be configured here. This gives the possibility to register phones on another master pbx.
Example: A dect phone dials the number (e.g. 100) of a dect-user object (pbx1, id=1) to register in. If it exists another user (e.g. 101) on another pbx (pbx2, id=2), this user can get registered now by dialling *<master-id>*101 --> *2*101