Reference:IP62 WLAN WiFi Wireless IP-Phone

From innovaphone wiki
Jump to navigation Jump to search

This article describes the IP62 WLAN/WiFi wireless IP-Phone, differences to the deprecated IP72 Wireless IP-Phone and a list of compatible WLAN Infrastructures.

Applies To

This information applies to:

  • innovaphone IP62

Requirements

To perform configuration changes on the IP62 device a desktop programming kit (IP62/IP64/IP65) (50-00060-021) is required. The programming kit enables to connect the IP62 handset to a PC in order the configuration changes can be done using WinPDM software.

Feature Comparison

This chapter describes the differences in the feature sets between old and new WiFi handsets.

Handset Features Matrix
Feature IP72 IP62 Description
Messaging YES NO
LDAP Phone Book YES NO
Talk Time/ Standby Time 10 h / 40 h 15 h / 100 h with U-APSD
WiFi Standards 802.11 a/b/g 802.11 a/b/g/n
Supported Languages Latin-1 only UTF-8, 18 Languages

Although the IP62 does not have access to a central LDAP phone book, the solution described in Reference9:PBX/Objects/Directory_Search can be used.

WLAN Infrastructure Compatibility

IMPORTANT: Ask innovaphone Presales Team for possible interop configuration recommendations and pitfalls before you order the WiFi equipment and start with the roll-out.

Note that availability and combinations of controllers and access points may be subject to change by the manufacturer and are not in the responsability of innovaphone. Errors and omissions excepted.

innovaphone does not support WLAN infrastructures not listed in this document.

Certified WLAN Platforms
Vendor AP Model(s) Controller Model(s) SW Version(s)
Aerohive Networks AP 120, 121, 141, 330, 350, 370, 550 N/A 5.1r5
6.1r2
6.8r3
8.0r1
Aruba Networks AP 60, 61, 65, 70 600, 3000, 6000 Series 3.4.2.0
Aruba Networks AP 105, 120, 121, 124, 125 600, 3000, 6000 Series 5.0.3.0
6.0.1.0
Aruba Networks iAP 92, 93, 104, 105, 114, 115, 124, 125, 134, 135, 204, 214, 224, 275 600, 3000, 6000, 7000, 7200 6.2.1.2
6.3.1.3
6.4.2.0
6.4.2.6
6.4.3.4
6.5.4.0
Aruba Networks iAP 103, 205, 215, 225 600, 3000, 6000, 7000, 7200 6.2.1.2
6.3.1.3
6.4.2.0
6.4.2.6
6.4.3.4
6.4.4.8
6.5.4.0
8.2.1.0
Aruba Networks iAP 103, 204, 205, 214, 215, 224, 225, 314, 315, 324, 325 controllerless 6.5.4.3
Aruba Networks AP 207, 214, 215, 224, 225, 275, 304, 305, 314, 315, 324, 325, 334, 335, 344, 345 7000, 7200 6.5.4.0
8.2.1.0
8.3.0.3
Aruba Networks AP 324/325 600, 3000, 6000, 7000, 7200 6.4.4.6
6.4.4.8
6.5.4.0
8.2.1.0
Alcatel-Lucent Same as Aruba Networks 4000, 6000 Series Same as Aruba Networks
Avaya AP 8020, 8020-E 8180 1.1.0.113
2.0.0.084
2.1.0.102
Avaya AP 9132, 9133 N/A 7.5.2
Brocade AP 650, 6511, 6532, 7131 RFS4000, 6000, 7000
NX9000
5.1.0.0
5.4.0.0
5.4.4.0
Cisco (Autonomous) 1230, 1240 N/A 12.4(21a)JY / 12.3(8)JED
Cisco (Autonomous) 1140, 1250, 1260 N/A 12.4(25d)JA1
Cisco AP 1130, 1230, 1240, 1140, 1250, 1260, 1600, 1700, 2600, 2700, 2800, 3500, 3600, 3700, 3800 WLC 2xxx, 440x, 550x
WISM, 3750G
Cisco Flex 7500/8500
6.0.196, 7.0.98, 7.0.220
7.2.110, 7.3.101, 7.4.100.60
7.6.100, 8.0.100
8.1.20
8.2.110
8.3.102
8.3.112
8.3.121
8.5.103
8.5.120
8.7.106
Cisco AP 1702, 1832, 1852, 2702, 2802, 3702, 3802 WLC 3504, 5520, 8540 8.6.101
Cisco AP 1830/1850 WLC 2xxx, 440x, 550x
WISM, 3750G
Cisco Flex 7500/8500
8.1.131
Cisco AP 1140, 1250, 1260, 1600, 2600, 2700, 3500, 3600, 3700 3650, 3850, 5760 IOS XE 03.03.04, 03.07.03
Extreme Networks (Enterasys/IdentiFi) AP 3705, 3710, 3715, 3765, 3767, 3801, 3805, 3825, 3865, 3935 C25, C35, C2110, C5110, C5210, v2110 07.41.01
08.01.04
08.11.06
08.31.02
09.15.06
10.11.04
10.41.03
Extreme Networks (WiNG) AP 622, 650, 6511, 6522, 6532, 7131, 7522, 7532, 8132, 8432 RFS/NX/VX/EX 5.1.0.0
5.4.0.0
5.4.4.0
5.5.5.0
5.8.3.0
5.9.1.2
Extricom EXRP-30n, EXRP-40En MultiSeries 500, 1000 4.5.09
HP MSM 422, 430, 460, 466 MSM710/720/760 5.7.1.0
HP MSM 425 and MSM 430/460/466 MSM830/850/870, WX500x controllers
10500/7500 20G Unified Wires-WLAN modules
3507P26
Juniper (Trapeze) MP/WLA 321, 322, 422, 522, 532 MX/WLC 2, 8, 200, 8x0, 2800 7.3.4.4

7.6.2.3
8.0.2.2

Lancom Systems L-3xx(9.10), L-4xx(9.10), L-8xx(9.18) WLC 4006+, 4025+, 4100 (9.10) 9.10/9.18
Meraki MR20, MR30H, MR33
MR42, MR42E, MR52, MR53, MR53E
MR70, MR74, MR84
N/A 25.9
Meru Networks AP200, 300 MC1000, 1500, 3x00, 4x00, 5000 4.0-150
Meru Networks AP300, 1000 MC1500, 3x00, 4x00, 5000 5.0-87
5.1-47(Requirement for AP1000)
Meru Networks AP300, 332, 1000, 832, 822 MC1500, 1550, 3x00, 4x00, 5000, 6000 5.3.50 (Requirement for AP332)
6.1-3-5
Fortinet (Meru Networks) AP301, 302, 310, 311, 320, AP332 (i/e variants), AP822, 832 (i/e variants), AP1010, 1014, 1020 (i/e variants), U421EV/U423EV MC1550, 3x00, 4x00, 5000, 6000 7.0-8-0
8.2-4-0
8.4-0-7
Zebra Technologies (Motorola) AP 622, 650, 6511, 6522, 6532, 7131, 7522, 7532, 8132 RFS, NX, VX, EX 5.1.0.0

5.4.0.0, 5.4.4.0
5.5.5.0, 5.8.3.0

Zyxel NWA5123-AC, WAC5302D-S, NXC2500, NXC5500, WAC6100 series, WAC6500 series V5.0.0
Ruckus ZF 7962, 7363, 7343, 7341, 7372, 7982 ZD 1100, 3000, 5000 9.1.1.0v
9.4.2.0
9.7.0.220
9.7.1.0.17
Ruckus SmartZone ZF7372, 7982 & R300, R310, T300, R500, R510, R600, R610, R710 SmartZone platform vSZ-(E,HD), SCG, SZ100 3.2.1.0.139
9.13.0.0.232
3.5.0.0.808
3.5.1.0.862
Xirrus XR-620, 630 N/A 7.5.0

as of November, 16th 2018.

DAS Compatibility

Distributed Antenna Systems (DAS) provide a cost-effective solution for extending radio coverage inside large facilities. Simply put, a DAS can be seen as a long cable starting at a base station or access point to which many antennas are connected. While the architecture can be utilized to mitigate certain coverage issues, the innovaphone IP62 was not designed to accommodate for such RF environments. Furthermore it is difficult to ascertain and ensure WLAN reliability in regard to interference, capacity, roaming, location-based services, and some important 802.11n features, such as MIMO. As a consequence thereof, innovaphone will not endorse nor provide RF support for WiFi deployments over any Distributed Antenna System.

Configuration

IP62 configuration is done via WinPDM-application available at wireless package on download-page. Use of desktop programming kit (IP62/IP64/IP65) (50-00060-021) is required.

For offered configuration options refer to

ICE/TURN

IP62-firmware 6.0.0 and higher supports TURN and TLS-registration with certificate.

By default, ICE mechanism is deactivated. Activation can be done via WinPDM according to following screenshot. ICE activation also enables TURN-configuration field.

IP62 ice turn.png

NB: Use of ICE also requires active STUN Server to be configured.

Troubleshooting

Local Syslog

The local Syslog file of the handset can be downloaded via Web UI of the IP62. The default login credentials are Username: admin, Password: changeme. Navigate to Troubleshoot -> Syslog to get the syslog.

Maintenance

There are additional tools and informations for analysing the IP62 in the admin menu. You can reach the menu by entering the Settings menu and type in “40022” on the keypad.

For example, to activate pcap tracing:

  • Enable pcap in the IP62 GUI: “Settings -> AdminMenu* -> Logging -> Logging mode
  • Choose what should be traced: “Settings -> AdminMenu* -> Logging -> Extended logging

Known Problems

  • Some manufacturers do not support the "802.11d" (World Mode) standard.
    • If your clients show problems when logging in or roaming, try to disable the "World Mode" via WinPDM. (Network::Network-X::World mode regulatory domain)
    • Known Manufacturers:
      • "Ubiquiti" disabled since firmware 3.1.12 (2014)

Related Articles

Howto:IP62 WLAN WiFi Handset - innovaphone - H323 Testreport

Howto:WLAN Interop Test Description

Howto:MXR-2 Mobility Exchange - Trapeze - Testreport