Reference:Rerouting Causes

From innovaphone wiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
There are also other versions of this article available: Reference (this version) | Reference9

An outgoing call my fail. Depending on the cause the call fails with, a rerouting is performed.

Causes causing rerouting are:

  • #1 "Unallocated (unassigned) number"
  • #2 "No route to specified transit network"
  • #3 "No route to destination"
  • #18 "No user responding"
  • #34 "No circuit/channel available"
  • #38 "Network out of order"
  • #41 "Temporary failure"
  • #42 "Switching equipment congestion"
  • #44 "Requested circuit/channel not available"
  • #47 "Resources unavailable, unspecified"
  • #49 "Quality of service unavailable"

This mechanism is implemented both in the PBX Gateway object and in the Trunk object as well as in the gateway level routing engine .

Re-routing calls which failed due to one of the first 4 causes (Unallocated (unassigned) number, No route to specified transit network, No route to destination and No user responding) may not always be desirable. There is a No Reroute on wrong No option available in the gateway routes to disable this.

Reference:ISDN Cause Codes