V13 Gateway Firmware Technical Data EN

From innovaphone-wiki

Jump to: navigation, search

All information, technical specifications and delivery times mentioned in this document may be subject to change. Errors and omissions excepted. Copyright © 2000-2022 innovaphone® AG

Contents

Technical Data

innovaphone Gateway Firmware Version 13

General features valid for innovaphone gateways operated with firmware V13

VoIP protocols

H.323 Version 5, including proprietary extensions

H.323 over UDP, TCP, TLS 1.2

SIP Version 2, conform RFC 3261

SIP over UDP, TCP, TLS

RTP, SRTP (SDES, DTLS 1.2), RTCP, ICE

T.38 Fax (supported rates 9.6k and 14.4k) incl. fallback to G.711 (device dependent)

ISDN protocols

valid for gateways including S0/S2M interfaces

Euro ISDN D-channel protocol (E-DSS1)

QSIG D-channel protocols: ECMA1, ECMA2

US D-channel protocols: USA-National-ISDN-1, USA-5ESS, USA-DMS100

Connection modes: Point-to-Point (PtP), Point-to-Multipoint (PtMP)

S0: up to 2 speech channels per interface

S20 E1/T1: up to 30/23 ISDN-speech channels per interface

Operation mode TE/NT adjustable per interface

myApps Application Platform

Universal application platform

Can be operated on gateway models xx11, 11xx (not 1130) and xx13 or as a virtual solution

Provides applications for system administration and UC client operation.

Excerpt of available applications

System Administration

  • DevicesApp
  • UsersAdminApp
  • ContactsApp
  • ReportingApp
  • Alarm- and EventApp
  • FilesApp
  • CalendarApp
  • AppStore
  • Control/access via myApps-UC client

myApps-UC-Client (PBX based)

  • PhoneApp and SoftphoneApp (PBX function)
  • CallListApp
  • ChatApp
  • FaxApp
  • VoicemailApp
  • Phonebook access system/external/Outlook
  • Supported OS: Windows, iOS, Android or WebClient

Minimum requirements when operated as virtual solution:

  • VMWare Player/VMWare Workstation or Hyper-V
  • 1vCPU (min. 800 MHz - depending on other processes/applications on the same system)
  • 512 MB RAM
  • 16GB disk (when operated in IPxx11/11xx an mSATA SSD)

Network

IPv4/IPv6 Support (not myApps-ApplicationPlatform)

NAT, H.323-NAT, STUN, TURN over UDP/TCP

RSTP, EAP-TLS/EAP-MD5 acc. to IEEE 802.1X

DHCP support

NTP support

VLAN-ID acc. to IEEE 802.1Q

LLDP support for VLAN configuration

PPPoE, manual or automatic connection after boot

PPTP Tunneling up to 32 tunnels simultaneously, encoding via MPPE

Reverse Proxy, various SBC-functionalities (IPxx11/11xx recommended)

Administration

Password protected administration access via web-browser, optional two-factor-authentication

Store and restore configuration files

System-wide automatic upgrade of firmware and configuration data via myAPPs-DevicesApp

Automatic ping connection test

Display of interface- and connection status

Generation of log- and trace files and SNMP.V3-traps

Personal tools