innovaphone wiki - User contributions [en]

Howto11r2:2N Helios IP - 2N - SIP Testreport 2017

2017-02-07T07:33:02Z

2ntestteam: /* Version */

==Summary==
The Helios IP - doorphone supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F|recommended product]].

==Certification Status==

{{Template:Compat Status "tested"}}





Testing of this product has been finalized January 16th, 2017.

==Version==
Helios IP Firmware Version:
2.18.0.27.5

Helios IP Hardware Version:
570v5

innovaphone PBX Firmware Version:
11r2sr22 [11.3648] / IPVA

==Device Setup==

{| border="1"
!Tested feature
!Result
|----
|Register Device w/o specific configuration (requires DHCP)
|Nok
|----
|DHCP is default
|Ok
|----
|DHCP yields timeserver and time displays correctly
|Nok
|----
|SNTP config has TZ string for timezone/dst autoconfig
|Nok
|----
|DHCP yields correct default gateway
|Ok
|----
|Device supports magic registration (e.g. by serial)
|Nok
|----
|Fixed registrations works
|Ok
|----
|Device registers w/o Extension (just by name)
|Nok
|----
|Device registers by name with non-latin1 characters (e.g. UserÄÖÜ)
|Nok
|----
|Device registers by extension
|Ok
|----
|Device registers with password
|Ok
|----
|Device registers multiple identities
|Ok
|----
|2nd GK is supported (mit SIP??)
|Nok
|----
|Changing registrations between GK1 and GK2 (mit SIP??)
|Nok
|----
|PBX redirect (UserObject on Master/Phone at Slave registered)
|Ok
|----
|Physical Location (@PBX) correct?
|Ok
|----
|Device supports STUN protocol
|Nok
|----
|Device sends NAT - keepalive messages
|Ok
|----
|Device usable in [[Howto:Hosting | hosting]] scenarios?
|Ok
|----
|Device refreshes the PBX registration
|Ok
|----
|Device supports SIP over TCP
|Ok
|----
|Device supports SRTP
|Nok
|----
|Device supports SIPS (SIP over TLS)
|Nok
|----
|Device supports HTTPS
|Ok
|----
|Device supports VAD (Voice activity detection)
|Nok
|----
|Device supports Auto-Answer (needed when used with CTI client)
|Ok
|----
|Supported menu languages
|Ok
|}

==Test Results==

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|call using g711a
|Ok
|----
|call using g711u
|Ok
|----
|call using g729
|Ok
|----
|call using g722
|Ok
|----
|Overlapped sending
|Nok
|----
|Device sets up an early media channel for incoming calls
|Nok
|----
|Device sets up an early media channel for outgoing calls
|Nok
|----
|Device shows called id number
|Nok
|----
|Device shows called id name
|Nok
|----
|Device shows called id display info
|Nok
|----
|Fax using T.38
|Nok
|----
|CGPN can be suppressed
|Nok
|----
|Reverse Media Negotiation
|Ok
|----
|Device shows CDPN/CGPN on incoming call
|Ok
|----
|Device shows CDPN/CGPN on outgoing call
|Ok
|----
|Device shows connected number
|Nok
|----
|Device shows diverting number
|Nok
|----
|Device supports distinctive ringing
|Ok
|----
|Device supports asymetric codec negotiation
|Nok
|----
|Device supports codec renegotiation during a conversation
|Ok
|----
|Device shows correct display message in case of busy CDPN
|Nok
|----
|Device shows correct display message in case of not existing CDPN
|Nok
|----
|Device shows correct display message in case that the call is declined
|Nok
|----
|3party conference possible
|Nok
|----
|Device supports display updates during call(needed for Directory Search object)
|Nok
|----
|Long Time Call (>30 min) works?
|Ok
|----
|Registration redirecting works?
|Nok
|----
|Incoming SRTP call - SRTP not enabled on DUT
|Nok
|----
|Incoming SRTP call - SRTP enabled on DUT
|Nok
|----
|Voice Quality OK?
|Ok
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|DTMF tones sent correctly
|Ok
|----
|DTMF tones received correctly
|Ok
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|Device handles incoming hold correctly
|Ok
|----
|Device can put a call on hold using correctly(inactive or sendonly)
|Nok
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|Ok
|Ok
|----
||inno1 calls inno2. inno1 transfers to testphone.
|Ok
|Ok
|----
|inno1 calls testphone. inno1 transfers to inno2.
|Ok
|Ok
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|Ok
|Ok
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|N/A
|----
||inno1 calls inno2. inno1 transfers to testphone.
|N/A
|N/A
|----
|inno1 calls testphone. inno1 transfers to inno2.
|N/A
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|Ok
|----
||inno1 calls inno2. inno1 transfers to testphone.
|Ok
|----
|inno1 calls testphone. inno1 transfers to inno2.
|Ok
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|Ok
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|}

=== Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|testphone makes call to a Broadcast Group. inno1 picks up.
|Ok
|----
|inno1 makes call to a Broadcast Group. testphone picks up.
|Ok
|----
|testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
|Ok
|----
|testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
|Ok
|----
|inno1 makes call to a Waiting Queue. testphone picks up.
|Ok
|}

=== DTMF Features ===

{| border="1"
!Tested feature
!Result
|----
|CFU Activate/Deactivate
|Nok
|----
|CFB Activate/Deactivate
|Nok
|----
|CFNR Activate/Deactivate
|Nok
|----
|Pickup Group
|Nok
|----
|Pickup Directed
|Nok
|----
|Park/Unpark
|Nok
|----
|Park To/Unpark From
|Nok
|----
|Call Completion Busy
|Nok
|----
|Call Completion Cancel
|Nok
|----
|Join Group/Leave Group
|Nok
|----
|Join All Groups/Leave All Groups
|Nok
|----
|Enable mobility/Disable mobility
|Nok
|----
|Enable mobility cw/Disable mobility cw
|Nok
|----
|Set presence
|Nok
|}

==Other Features==

===Directory===

{| border="1"
!Tested feature
!Result
|----
|Device built-in directory
|Ok
|----
|Exists
|Ok
|----
|Can be dialled from
|Ok
|----
|Does CLI resolution
|Nok
|----
|display update if directory object is used?
|Ok
|}

{| border="1"
!Tested feature
!Result
|----
|External LDAP Server supported
|Nok
|----
|Can be dialled from
|Nok
|----
|Does CLI resolution
|Nok
|----
|display update if directory object is used?
|Nok
|}

===Keys===

{| border="1"
!Tested feature
!Result
|----
|Device has speed dial keys
|Ok
|----
|Device has programmable function keys
|Ok
|----
|Device has partner keys
|Ok
|}

===CTI Features (with SOAP / TAPI / myPBX) ===

{| border="1"
!Tested feature
!Result
|----
|User Call - outgoing call
|Nok
|----
|User Connect - Answer incoming call
|Nok
|----
|User Reject - Reject alerting call
|Nok
|----
|User Disconnect - Disconnect active call
|Nok
|----
|User Hold - Put connected call on hold
|Nok
|----
|User Hold Retrieve - Retrieve call on hold
|Nok
|----
|User Transfer - Transfer with Consult
|Nok
|----
|User Transfer - Transfer with Consult (Alerting only)
|Nok
|----
|User Transfer - Blind Transfer
|Nok
|----
|3PTY - Make 3rd Party Call
|Nok
|----
|Connected Number Update on Display
|Nok
|}

===UC Features===

{| border="1"
!Tested feature
!Result
|----
|Video calls possible?
|Ok
|----
|Video conference possible? (max. amount of participants)
|Nok
|----
|Video Codecs
|Ok
|----
|enable/disable video during call
|Ok
|----
|Set own presence possible?
|Nok
|----
|See presence of others possible?
|Nok
|----
|chat with mypbx client possible?
|Nok
|----
|chat with same vendor client possible?
|Nok
|----
|send IM - messages to phones possible?
|Nok
|}

== Configuration ==

=== innovaphone configuration ===

The innovaphone Virtual Appliance user interface can be opened on any computer connected with the innovaphone Virtual Appliance. Start a web browser on your computer. Enter innovaphone Virtual Appliance in the address line of the browser. The innovaphone Virtual Appliance user interface opens and enter the password. In settings innovaphone Virtual Appliance go to: PBX > Objects and choose new (User).
[[Image:2N Helios IP innovaphone 1.PNG]]

Enter the Description, Long Name, Display Name, Name, Number, Password. Check Node, PBX and click Apply, OK.
[[Image:2N_Helios_IP_innovaphone_2.PNG]]

=== doorphone configuration ===

Open web browser and enter IP address of intercom (default: admin/2n). If you don´t know IP of your Intercom, you can use 2N Helios IP Network Scanner (download [https://www.2n.cz/en_GB/dashboard 2N website]). Go to Service – Phone – SIP 1 and fill Intercom Identity – Authentication – SIP Proxy – SIP Registrar and save settings. Connection between innovaphone Virtual Appliance and 2N Helios IP is now ready. In directory you can set, which numbers you will call from 2N Helios IP (you can ad numbers from which are in the innovaphone Virtual Appliance).
[[Image:2N Helios IP hip1.PNG]]

Go to Service - Phone - Audio and set DTMF Receiving, Audio Codecs like described in the screenshot below.

[[Image:2N Helios IP hip2.PNG]]

[[Category:Compat|{{PAGENAME}}]]

Howto11r2:2N Helios IP - 2N - SIP Testreport 2017

2017-02-07T07:30:19Z

2ntestteam: /* Version */

==Summary==
The Helios IP - doorphone supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F|recommended product]].

==Certification Status==

{{Template:Compat Status "tested"}}





Testing of this product has been finalized January 16th, 2017.

==Version==
Helios Firmware Version:
2.18.0.27.5

Helios Hardware Version:
570v5

innovaphone Firmware:
11r2sr22 [11.3648] / IPVA

==Device Setup==

{| border="1"
!Tested feature
!Result
|----
|Register Device w/o specific configuration (requires DHCP)
|Nok
|----
|DHCP is default
|Ok
|----
|DHCP yields timeserver and time displays correctly
|Nok
|----
|SNTP config has TZ string for timezone/dst autoconfig
|Nok
|----
|DHCP yields correct default gateway
|Ok
|----
|Device supports magic registration (e.g. by serial)
|Nok
|----
|Fixed registrations works
|Ok
|----
|Device registers w/o Extension (just by name)
|Nok
|----
|Device registers by name with non-latin1 characters (e.g. UserÄÖÜ)
|Nok
|----
|Device registers by extension
|Ok
|----
|Device registers with password
|Ok
|----
|Device registers multiple identities
|Ok
|----
|2nd GK is supported (mit SIP??)
|Nok
|----
|Changing registrations between GK1 and GK2 (mit SIP??)
|Nok
|----
|PBX redirect (UserObject on Master/Phone at Slave registered)
|Ok
|----
|Physical Location (@PBX) correct?
|Ok
|----
|Device supports STUN protocol
|Nok
|----
|Device sends NAT - keepalive messages
|Ok
|----
|Device usable in [[Howto:Hosting | hosting]] scenarios?
|Ok
|----
|Device refreshes the PBX registration
|Ok
|----
|Device supports SIP over TCP
|Ok
|----
|Device supports SRTP
|Nok
|----
|Device supports SIPS (SIP over TLS)
|Nok
|----
|Device supports HTTPS
|Ok
|----
|Device supports VAD (Voice activity detection)
|Nok
|----
|Device supports Auto-Answer (needed when used with CTI client)
|Ok
|----
|Supported menu languages
|Ok
|}

==Test Results==

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|call using g711a
|Ok
|----
|call using g711u
|Ok
|----
|call using g729
|Ok
|----
|call using g722
|Ok
|----
|Overlapped sending
|Nok
|----
|Device sets up an early media channel for incoming calls
|Nok
|----
|Device sets up an early media channel for outgoing calls
|Nok
|----
|Device shows called id number
|Nok
|----
|Device shows called id name
|Nok
|----
|Device shows called id display info
|Nok
|----
|Fax using T.38
|Nok
|----
|CGPN can be suppressed
|Nok
|----
|Reverse Media Negotiation
|Ok
|----
|Device shows CDPN/CGPN on incoming call
|Ok
|----
|Device shows CDPN/CGPN on outgoing call
|Ok
|----
|Device shows connected number
|Nok
|----
|Device shows diverting number
|Nok
|----
|Device supports distinctive ringing
|Ok
|----
|Device supports asymetric codec negotiation
|Nok
|----
|Device supports codec renegotiation during a conversation
|Ok
|----
|Device shows correct display message in case of busy CDPN
|Nok
|----
|Device shows correct display message in case of not existing CDPN
|Nok
|----
|Device shows correct display message in case that the call is declined
|Nok
|----
|3party conference possible
|Nok
|----
|Device supports display updates during call(needed for Directory Search object)
|Nok
|----
|Long Time Call (>30 min) works?
|Ok
|----
|Registration redirecting works?
|Nok
|----
|Incoming SRTP call - SRTP not enabled on DUT
|Nok
|----
|Incoming SRTP call - SRTP enabled on DUT
|Nok
|----
|Voice Quality OK?
|Ok
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|DTMF tones sent correctly
|Ok
|----
|DTMF tones received correctly
|Ok
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|Device handles incoming hold correctly
|Ok
|----
|Device can put a call on hold using correctly(inactive or sendonly)
|Nok
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|Ok
|Ok
|----
||inno1 calls inno2. inno1 transfers to testphone.
|Ok
|Ok
|----
|inno1 calls testphone. inno1 transfers to inno2.
|Ok
|Ok
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|Ok
|Ok
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|N/A
|----
||inno1 calls inno2. inno1 transfers to testphone.
|N/A
|N/A
|----
|inno1 calls testphone. inno1 transfers to inno2.
|N/A
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|Ok
|----
||inno1 calls inno2. inno1 transfers to testphone.
|Ok
|----
|inno1 calls testphone. inno1 transfers to inno2.
|Ok
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|Ok
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|}

=== Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|testphone makes call to a Broadcast Group. inno1 picks up.
|Ok
|----
|inno1 makes call to a Broadcast Group. testphone picks up.
|Ok
|----
|testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
|Ok
|----
|testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
|Ok
|----
|inno1 makes call to a Waiting Queue. testphone picks up.
|Ok
|}

=== DTMF Features ===

{| border="1"
!Tested feature
!Result
|----
|CFU Activate/Deactivate
|Nok
|----
|CFB Activate/Deactivate
|Nok
|----
|CFNR Activate/Deactivate
|Nok
|----
|Pickup Group
|Nok
|----
|Pickup Directed
|Nok
|----
|Park/Unpark
|Nok
|----
|Park To/Unpark From
|Nok
|----
|Call Completion Busy
|Nok
|----
|Call Completion Cancel
|Nok
|----
|Join Group/Leave Group
|Nok
|----
|Join All Groups/Leave All Groups
|Nok
|----
|Enable mobility/Disable mobility
|Nok
|----
|Enable mobility cw/Disable mobility cw
|Nok
|----
|Set presence
|Nok
|}

==Other Features==

===Directory===

{| border="1"
!Tested feature
!Result
|----
|Device built-in directory
|Ok
|----
|Exists
|Ok
|----
|Can be dialled from
|Ok
|----
|Does CLI resolution
|Nok
|----
|display update if directory object is used?
|Ok
|}

{| border="1"
!Tested feature
!Result
|----
|External LDAP Server supported
|Nok
|----
|Can be dialled from
|Nok
|----
|Does CLI resolution
|Nok
|----
|display update if directory object is used?
|Nok
|}

===Keys===

{| border="1"
!Tested feature
!Result
|----
|Device has speed dial keys
|Ok
|----
|Device has programmable function keys
|Ok
|----
|Device has partner keys
|Ok
|}

===CTI Features (with SOAP / TAPI / myPBX) ===

{| border="1"
!Tested feature
!Result
|----
|User Call - outgoing call
|Nok
|----
|User Connect - Answer incoming call
|Nok
|----
|User Reject - Reject alerting call
|Nok
|----
|User Disconnect - Disconnect active call
|Nok
|----
|User Hold - Put connected call on hold
|Nok
|----
|User Hold Retrieve - Retrieve call on hold
|Nok
|----
|User Transfer - Transfer with Consult
|Nok
|----
|User Transfer - Transfer with Consult (Alerting only)
|Nok
|----
|User Transfer - Blind Transfer
|Nok
|----
|3PTY - Make 3rd Party Call
|Nok
|----
|Connected Number Update on Display
|Nok
|}

===UC Features===

{| border="1"
!Tested feature
!Result
|----
|Video calls possible?
|Ok
|----
|Video conference possible? (max. amount of participants)
|Nok
|----
|Video Codecs
|Ok
|----
|enable/disable video during call
|Ok
|----
|Set own presence possible?
|Nok
|----
|See presence of others possible?
|Nok
|----
|chat with mypbx client possible?
|Nok
|----
|chat with same vendor client possible?
|Nok
|----
|send IM - messages to phones possible?
|Nok
|}

== Configuration ==

=== innovaphone configuration ===

The innovaphone Virtual Appliance user interface can be opened on any computer connected with the innovaphone Virtual Appliance. Start a web browser on your computer. Enter innovaphone Virtual Appliance in the address line of the browser. The innovaphone Virtual Appliance user interface opens and enter the password. In settings innovaphone Virtual Appliance go to: PBX > Objects and choose new (User).
[[Image:2N Helios IP innovaphone 1.PNG]]

Enter the Description, Long Name, Display Name, Name, Number, Password. Check Node, PBX and click Apply, OK.
[[Image:2N_Helios_IP_innovaphone_2.PNG]]

=== doorphone configuration ===

Open web browser and enter IP address of intercom (default: admin/2n). If you don´t know IP of your Intercom, you can use 2N Helios IP Network Scanner (download [https://www.2n.cz/en_GB/dashboard 2N website]). Go to Service – Phone – SIP 1 and fill Intercom Identity – Authentication – SIP Proxy – SIP Registrar and save settings. Connection between innovaphone Virtual Appliance and 2N Helios IP is now ready. In directory you can set, which numbers you will call from 2N Helios IP (you can ad numbers from which are in the innovaphone Virtual Appliance).
[[Image:2N Helios IP hip1.PNG]]

Go to Service - Phone - Audio and set DTMF Receiving, Audio Codecs like described in the screenshot below.

[[Image:2N Helios IP hip2.PNG]]

[[Category:Compat|{{PAGENAME}}]]

Howto11r2:2N Helios IP - 2N - SIP Testreport 2017

2017-02-07T07:28:32Z

2ntestteam: /* doorphone configuration */

==Summary==
The Helios IP - doorphone supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F|recommended product]].

==Certification Status==

{{Template:Compat Status "tested"}}





Testing of this product has been finalized January 16th, 2017.

==Version==
Helios Firmware Version: 2.18.0.27.5
Helios Hardware Version: 570v5
innovaphone Firmware: 11r2sr22 [11.3648] / IPVA

==Device Setup==

{| border="1"
!Tested feature
!Result
|----
|Register Device w/o specific configuration (requires DHCP)
|Nok
|----
|DHCP is default
|Ok
|----
|DHCP yields timeserver and time displays correctly
|Nok
|----
|SNTP config has TZ string for timezone/dst autoconfig
|Nok
|----
|DHCP yields correct default gateway
|Ok
|----
|Device supports magic registration (e.g. by serial)
|Nok
|----
|Fixed registrations works
|Ok
|----
|Device registers w/o Extension (just by name)
|Nok
|----
|Device registers by name with non-latin1 characters (e.g. UserÄÖÜ)
|Nok
|----
|Device registers by extension
|Ok
|----
|Device registers with password
|Ok
|----
|Device registers multiple identities
|Ok
|----
|2nd GK is supported (mit SIP??)
|Nok
|----
|Changing registrations between GK1 and GK2 (mit SIP??)
|Nok
|----
|PBX redirect (UserObject on Master/Phone at Slave registered)
|Ok
|----
|Physical Location (@PBX) correct?
|Ok
|----
|Device supports STUN protocol
|Nok
|----
|Device sends NAT - keepalive messages
|Ok
|----
|Device usable in [[Howto:Hosting | hosting]] scenarios?
|Ok
|----
|Device refreshes the PBX registration
|Ok
|----
|Device supports SIP over TCP
|Ok
|----
|Device supports SRTP
|Nok
|----
|Device supports SIPS (SIP over TLS)
|Nok
|----
|Device supports HTTPS
|Ok
|----
|Device supports VAD (Voice activity detection)
|Nok
|----
|Device supports Auto-Answer (needed when used with CTI client)
|Ok
|----
|Supported menu languages
|Ok
|}

==Test Results==

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|call using g711a
|Ok
|----
|call using g711u
|Ok
|----
|call using g729
|Ok
|----
|call using g722
|Ok
|----
|Overlapped sending
|Nok
|----
|Device sets up an early media channel for incoming calls
|Nok
|----
|Device sets up an early media channel for outgoing calls
|Nok
|----
|Device shows called id number
|Nok
|----
|Device shows called id name
|Nok
|----
|Device shows called id display info
|Nok
|----
|Fax using T.38
|Nok
|----
|CGPN can be suppressed
|Nok
|----
|Reverse Media Negotiation
|Ok
|----
|Device shows CDPN/CGPN on incoming call
|Ok
|----
|Device shows CDPN/CGPN on outgoing call
|Ok
|----
|Device shows connected number
|Nok
|----
|Device shows diverting number
|Nok
|----
|Device supports distinctive ringing
|Ok
|----
|Device supports asymetric codec negotiation
|Nok
|----
|Device supports codec renegotiation during a conversation
|Ok
|----
|Device shows correct display message in case of busy CDPN
|Nok
|----
|Device shows correct display message in case of not existing CDPN
|Nok
|----
|Device shows correct display message in case that the call is declined
|Nok
|----
|3party conference possible
|Nok
|----
|Device supports display updates during call(needed for Directory Search object)
|Nok
|----
|Long Time Call (>30 min) works?
|Ok
|----
|Registration redirecting works?
|Nok
|----
|Incoming SRTP call - SRTP not enabled on DUT
|Nok
|----
|Incoming SRTP call - SRTP enabled on DUT
|Nok
|----
|Voice Quality OK?
|Ok
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|DTMF tones sent correctly
|Ok
|----
|DTMF tones received correctly
|Ok
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|Device handles incoming hold correctly
|Ok
|----
|Device can put a call on hold using correctly(inactive or sendonly)
|Nok
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|Ok
|Ok
|----
||inno1 calls inno2. inno1 transfers to testphone.
|Ok
|Ok
|----
|inno1 calls testphone. inno1 transfers to inno2.
|Ok
|Ok
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|Ok
|Ok
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|N/A
|----
||inno1 calls inno2. inno1 transfers to testphone.
|N/A
|N/A
|----
|inno1 calls testphone. inno1 transfers to inno2.
|N/A
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|Ok
|----
||inno1 calls inno2. inno1 transfers to testphone.
|Ok
|----
|inno1 calls testphone. inno1 transfers to inno2.
|Ok
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|Ok
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|}

=== Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|testphone makes call to a Broadcast Group. inno1 picks up.
|Ok
|----
|inno1 makes call to a Broadcast Group. testphone picks up.
|Ok
|----
|testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
|Ok
|----
|testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
|Ok
|----
|inno1 makes call to a Waiting Queue. testphone picks up.
|Ok
|}

=== DTMF Features ===

{| border="1"
!Tested feature
!Result
|----
|CFU Activate/Deactivate
|Nok
|----
|CFB Activate/Deactivate
|Nok
|----
|CFNR Activate/Deactivate
|Nok
|----
|Pickup Group
|Nok
|----
|Pickup Directed
|Nok
|----
|Park/Unpark
|Nok
|----
|Park To/Unpark From
|Nok
|----
|Call Completion Busy
|Nok
|----
|Call Completion Cancel
|Nok
|----
|Join Group/Leave Group
|Nok
|----
|Join All Groups/Leave All Groups
|Nok
|----
|Enable mobility/Disable mobility
|Nok
|----
|Enable mobility cw/Disable mobility cw
|Nok
|----
|Set presence
|Nok
|}

==Other Features==

===Directory===

{| border="1"
!Tested feature
!Result
|----
|Device built-in directory
|Ok
|----
|Exists
|Ok
|----
|Can be dialled from
|Ok
|----
|Does CLI resolution
|Nok
|----
|display update if directory object is used?
|Ok
|}

{| border="1"
!Tested feature
!Result
|----
|External LDAP Server supported
|Nok
|----
|Can be dialled from
|Nok
|----
|Does CLI resolution
|Nok
|----
|display update if directory object is used?
|Nok
|}

===Keys===

{| border="1"
!Tested feature
!Result
|----
|Device has speed dial keys
|Ok
|----
|Device has programmable function keys
|Ok
|----
|Device has partner keys
|Ok
|}

===CTI Features (with SOAP / TAPI / myPBX) ===

{| border="1"
!Tested feature
!Result
|----
|User Call - outgoing call
|Nok
|----
|User Connect - Answer incoming call
|Nok
|----
|User Reject - Reject alerting call
|Nok
|----
|User Disconnect - Disconnect active call
|Nok
|----
|User Hold - Put connected call on hold
|Nok
|----
|User Hold Retrieve - Retrieve call on hold
|Nok
|----
|User Transfer - Transfer with Consult
|Nok
|----
|User Transfer - Transfer with Consult (Alerting only)
|Nok
|----
|User Transfer - Blind Transfer
|Nok
|----
|3PTY - Make 3rd Party Call
|Nok
|----
|Connected Number Update on Display
|Nok
|}

===UC Features===

{| border="1"
!Tested feature
!Result
|----
|Video calls possible?
|Ok
|----
|Video conference possible? (max. amount of participants)
|Nok
|----
|Video Codecs
|Ok
|----
|enable/disable video during call
|Ok
|----
|Set own presence possible?
|Nok
|----
|See presence of others possible?
|Nok
|----
|chat with mypbx client possible?
|Nok
|----
|chat with same vendor client possible?
|Nok
|----
|send IM - messages to phones possible?
|Nok
|}

== Configuration ==

=== innovaphone configuration ===

The innovaphone Virtual Appliance user interface can be opened on any computer connected with the innovaphone Virtual Appliance. Start a web browser on your computer. Enter innovaphone Virtual Appliance in the address line of the browser. The innovaphone Virtual Appliance user interface opens and enter the password. In settings innovaphone Virtual Appliance go to: PBX > Objects and choose new (User).
[[Image:2N Helios IP innovaphone 1.PNG]]

Enter the Description, Long Name, Display Name, Name, Number, Password. Check Node, PBX and click Apply, OK.
[[Image:2N_Helios_IP_innovaphone_2.PNG]]

=== doorphone configuration ===

Open web browser and enter IP address of intercom (default: admin/2n). If you don´t know IP of your Intercom, you can use 2N Helios IP Network Scanner (download [https://www.2n.cz/en_GB/dashboard 2N website]). Go to Service – Phone – SIP 1 and fill Intercom Identity – Authentication – SIP Proxy – SIP Registrar and save settings. Connection between innovaphone Virtual Appliance and 2N Helios IP is now ready. In directory you can set, which numbers you will call from 2N Helios IP (you can ad numbers from which are in the innovaphone Virtual Appliance).
[[Image:2N Helios IP hip1.PNG]]

Go to Service - Phone - Audio and set DTMF Receiving, Audio Codecs like described in the screenshot below.

[[Image:2N Helios IP hip2.PNG]]

[[Category:Compat|{{PAGENAME}}]]

Howto6:2N Helios IP - 2N - SIP Testreport

2017-02-07T07:26:36Z

2ntestteam: /* doorphone configuration */

==Summary==
The Helios IP - doorphone supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F|recommended product]].

The video functionality of the doorphone was also tested. With the current V6 SR2 firmware only basic video calls are possible. For more information on this topic and other minor problems, please refer to: [[Howto:2N_Helios_IP_-_2N_-_SIP_Testreport#Known_Problems|Known Problems]]

The 2N support team was very fast and made an overall good impression.

The Helios IP - doorphone was retested by its manufacturer 2N in November 2010 using actualized firmware and hardware. The test were completed successfully, no problems were found. For a detailed view of this report, please have a look at [[Howto:2N_Helios_IP_-_2N_-_vendor_Testreport]]

==Certification Status==

{{Template:Compat Status "tested"}}





Testing of this product has been finalized June 16th, 2008.

==Version==
Firmware Version:
0.0.80

Hardware Version:
530v2

innovaphone Firmware:
SR2 HF6

==Device Setup==

{| border="1"
!Tested feature
!Result
|----
|Register Device w/o specific configuration (requires DHCP)
|No
|----
|DHCP is default
|Yes
|----
|DHCP yields timeserver and time displays correctly
|No
|----
|SNTP config has TZ string for timezone/dst autoconfig
|No
|----
|DHCP yields correct default gateway
|Yes
|----
|Device supports magic registration (e.g. by serial)
|No
|----
|Fixed registrations works
|Yes
|----
|Device registers w/o Extension (just by name)
|Yes
|----
|Device registers by extension
|No
|----
|Device registers with password
|Yes
|----
|Device registers multiple identities
|No
|----
|Device supports STUN protocol
|No
|----
|Device sends NAT - keepalive messages
|No
|----
|Device refreshes the PBX registration
|Yes
|----
|Device supports SIP over TCP
|No
|----
|Device supports SIPS (SIP over TLS)
|No
|----
|Device supports HTTPS
|No
|----
|Device supports VAD (Voice activity detection)
|No
|}

==Test Results==

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|call using g711a
|Yes
|----
|call using g711u
|Yes
|----
|call using g729
|No
|----
|Early media channel
|No
|----
|Reverse Media Negotiaton
|Yes
|----
|Device supports asymetric codec negotiation
|No
|----
|Device supports codec renegotiation during a conversation
|Yes
|----
|Voice Quality OK?
|Yes
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|DTMF tones sent correctly
|Yes
|----
|DTMF tones received correctly
|Yes
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|Device handles incoming hold (inactive) correctly
|Yes
|----
|Device handles incoming hold (sendonly) correctly
|Yes
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|Yes
|Yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|Yes
|Yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|Yes
|Yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|Yes
|Yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|Yes
|Yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|Yes
|Yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|Yes
|Yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|Yes
|Yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|Yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|No
|----
|inno1 calls testphone. inno1 transfers to inno2.
|Yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|No
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|}

=== Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|Yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|Yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|testphone makes call to a Broadcast Group. inno1 picks up.
|Yes
|----
|inno1 makes call to a Broadcast Group. testphone picks up.
|Yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
|Yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
|Yes
|----
||inno1 makes call to a Waiting Queue. testphone picks up.
|Yes
|}

==Other Features==

===Directory===

{| border="1"
!Tested feature
!Result
|----
|Device built-in directory exists?
|No
|----
|Can be dialled from
|No
|----
|Does CLI resolution
|No
|}

===Hands free===

{| border="1"
!Tested feature
!Result
|----
|Loudspeaker operation works fine
|Yes
|----
|Hands free works fine
|Yes
|----
|Volume adjustable during call
|No
|}

===Keys===

{| border="1"
!Tested feature
!Result
|----
|Device has speed dial keys
|Yes
|----
|Device has programmable function keys
|No
|}

== Known Problems ==
* timezone settings can not be received via DHCP
* Cat-cable is connected via screw terminals not via LSA Plus, installation is quite complicated and should only be done by qualified personal.
* with the curent V6 SR2 firmware, video calls are supported only with basic functionality (transfer,hold and calls to waitingqueues not possible)
* as of the upcoming V7 firmware, video calls will have the same functionality as audio calls(transfer,hold and calls to waitingqueues possible)

== Configuration ==

=== innovaphone configuration ===

The doorphone registers at the PBX as a normal PBX user.

[[Image:2N Helios IP - 2N - SIP Testreport 1.PNG]]

=== doorphone configuration ===

To register the doorphone at the innovaphone PBX you must first configure the SIP-Settings.

[[Image:2N Helios IP - 2N - SIP Testreport 4.PNG]]

In order to be able to send and receive DTMF tones on the doorphone, please configure the audio codecs like described in the screenshot below.

[[Image:2N Helios IP - 2N - SIP Testreport 2.PNG]]

[[Category:Compat|{{PAGENAME}}]]

File:2N Helios IP - 2N - SIP Testreport 4.PNG

2017-02-07T07:24:01Z

2ntestteam:

Howto11r2:2N Helios IP - 2N - SIP Testreport 2017

2017-02-06T15:43:22Z

2ntestteam: /* Test Results */

==Summary==
The Helios IP - doorphone supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F|recommended product]].

==Certification Status==

{{Template:Compat Status "tested"}}





Testing of this product has been finalized January 16th, 2017.

==Version==
Firmware Version:
2.18.0.27.5

Hardware Version:
570v5

innovaphone Firmware:
11r2 sr22 IPVA[11.3648]

==Device Setup==

{| border="1"
!Tested feature
!Result
|----
|Register Device w/o specific configuration (requires DHCP)
|no
|----
|DHCP is default
|yes
|----
|DHCP yields timeserver and time displays correctly
|no
|----
|SNTP config has TZ string for timezone/dst autoconfig
|no
|----
|DHCP yields correct default gateway
|yes
|----
|Device supports magic registration (e.g. by serial)
|no
|----
|Fixed registrations works
|yes
|----
|Device registers w/o Extension (just by name)
|no
|----
|Device registers by name with non-latin1 characters (e.g. UserÄÖÜ)
|no
|----
|Device registers by extension
|yes
|----
|Device registers with password
|yes
|----
|Device registers multiple identities
|yes
|----
|2nd GK is supported (mit SIP??)
|no
|----
|Changing registrations between GK1 and GK2 (mit SIP??)
|no
|----
|PBX redirect (UserObject on Master/Phone at Slave registered)
|yes
|----
|Physical Location (@PBX) correct?
|yes
|----
|Device supports STUN protocol
|no
|----
|Device sends NAT - keepalive messages
|yes
|----
|Device usable in [[Howto:Hosting | hosting]] scenarios?
|yes
|----
|Device refreshes the PBX registration
|yes
|----
|Device supports SIP over TCP
|yes
|----
|Device supports SRTP
|no
|----
|Device supports SIPS (SIP over TLS)
|no
|----
|Device supports HTTPS
|yes
|----
|Device supports VAD (Voice activity detection)
|no
|----
|Device supports Auto-Answer (needed when used with CTI client)
|yes
|----
|Supported menu languages
|yes
|}

==Test Results==

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|call using g711a
|yes
|----
|call using g711u
|yes
|----
|call using g729
|yes
|----
|call using g722
|yes
|----
|Overlapped sending
|no
|----
|Device sets up an early media channel for incoming calls
|no
|----
|Device sets up an early media channel for outgoing calls
|no
|----
|Device shows called id number
|no
|----
|Device shows called id name
|no
|----
|Device shows called id display info
|no
|----
|Fax using T.38
|no
|----
|CGPN can be suppressed
|no
|----
|Reverse Media Negotiation
|yes
|----
|Device shows CDPN/CGPN on incoming call
|yes
|----
|Device shows CDPN/CGPN on outgoing call
|yes
|----
|Device shows connected number
|no
|----
|Device shows diverting number
|no
|----
|Device supports distinctive ringing
|yes
|----
|Device supports asymetric codec negotiation
|no
|----
|Device supports codec renegotiation during a conversation
|yes
|----
|Device shows correct display message in case of busy CDPN
|no
|----
|Device shows correct display message in case of not existing CDPN
|no
|----
|Device shows correct display message in case that the call is declined
|no
|----
|3party conference possible
|no
|----
|Device supports display updates during call(needed for Directory Search object)
|no
|----
|Long Time Call (>30 min) works?
|yes
|----
|Registration redirecting works?
|no
|----
|Incoming SRTP call - SRTP not enabled on DUT
|no
|----
|Incoming SRTP call - SRTP enabled on DUT
|no
|----
|Voice Quality OK?
|yes
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|DTMF tones sent correctly
|yes
|----
|DTMF tones received correctly
|yes
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|Device handles incoming hold correctly
|yes
|----
|Device can put a call on hold using correctly(inactive or sendonly)
|no
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|N/A
|----
||inno1 calls inno2. inno1 transfers to testphone.
|N/A
|N/A
|----
|inno1 calls testphone. inno1 transfers to inno2.
|N/A
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|}

=== Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|testphone makes call to a Broadcast Group. inno1 picks up.
|yes
|----
|inno1 makes call to a Broadcast Group. testphone picks up.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
|yes
|----
|inno1 makes call to a Waiting Queue. testphone picks up.
|yes
|}

=== DTMF Features ===

{| border="1"
!Tested feature
!Result
|----
|CFU Activate/Deactivate
|no
|----
|CFB Activate/Deactivate
|no
|----
|CFNR Activate/Deactivate
|no
|----
|Pickup Group
|no
|----
|Pickup Directed
|no
|----
|Park/Unpark
|no
|----
|Park To/Unpark From
|no
|----
|Call Completion Busy
|no
|----
|Call Completion Cancel
|no
|----
|Join Group/Leave Group
|no
|----
|Join All Groups/Leave All Groups
|no
|----
|Enable mobility/Disable mobility
|no
|----
|Enable mobility cw/Disable mobility cw
|no
|----
|Set presence
|no
|}

==Other Features==

===Directory===

{| border="1"
!Tested feature
!Result
|----
|Device built-in directory
|yes
|----
|Exists
|yes
|----
|Can be dialled from
|yes
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|yes
|}

{| border="1"
!Tested feature
!Result
|----
|External LDAP Server supported
|no
|----
|Can be dialled from
|no
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|no
|}

===Keys===

{| border="1"
!Tested feature
!Result
|----
|Device has speed dial keys
|yes
|----
|Device has programmable function keys
|yes
|----
|Device has partner keys
|yes
|}

===CTI Features (with SOAP / TAPI / myPBX) ===

{| border="1"
!Tested feature
!Result
|----
|User Call - outgoing call
|no
|----
|User Connect - Answer incoming call
|no
|----
|User Reject - Reject alerting call
|no
|----
|User Disconnect - Disconnect active call
|no
|----
|User Hold - Put connected call on hold
|no
|----
|User Hold Retrieve - Retrieve call on hold
|no
|----
|User Transfer - Transfer with Consult
|no
|----
|User Transfer - Transfer with Consult (Alerting only)
|no
|----
|User Transfer - Blind Transfer
|no
|----
|3PTY - Make 3rd Party Call
|no
|----
|Connected Number Update on Display
|no
|}

===UC Features===

{| border="1"
!Tested feature
!Result
|----
|Video calls possible?
|yes
|----
|Video conference possible? (max. amount of participants)
|no
|----
|Video Codecs
|yes
|----
|enable/disable video during call
|yes
|----
|Set own presence possible?
|no
|----
|See presence of others possible?
|no
|----
|chat with mypbx client possible?
|no
|----
|chat with same vendor client possible?
|no
|----
|send IM - messages to phones possible?
|no
|}

== Configuration ==

=== innovaphone configuration ===

The innovaphone Virtual Appliance user interface can be opened on any computer connected with the innovaphone Virtual Appliance. Start a web browser on your computer. Enter innovaphone Virtual Appliance in the address line of the browser. The innovaphone Virtual Appliance user interface opens and enter the password. In settings innovaphone Virtual Appliance go to: PBX > Objects and choose new (User).
[[Image:2N Helios IP innovaphone 1.PNG]]

Enter the Description, Long Name, Display Name, Name, Number, Password. Check Node, PBX and click Apply, OK.
[[Image:2N_Helios_IP_innovaphone_2.PNG]]

=== doorphone configuration ===

Open web browser and enter IP address of intercom (default: admin/2n). If you don´t know IP of your Intercom, you can use 2N Helios IP Network Scanner (download [https://www.2n.cz/en_GB/dashboard 2N website]). Go to Service – Phone – SIP 1 and fill Intercom Identity – Authentication – SIP Proxy – SIP Registrar and save settings. Connection between FRITZ! Box and 2N Helios IP is now ready. In directory you can set, which numbers you will call from 2N Helios IP (you can ad numbers from which are in the innovaphone Virtual Appliance).
[[Image:2N Helios IP hip1.PNG]]

Go to Service - Phone - Audio and set DTMF Receiving, Audio Codecs like described in the screenshot below.

[[Image:2N Helios IP hip2.PNG]]

[[Category:Compat|{{PAGENAME}}]]

Howto11r2:2N Helios IP - 2N - SIP Testreport 2017

2017-02-06T13:09:36Z

2ntestteam: /* Other Features */

==Summary==
The Helios IP - doorphone supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F|recommended product]].

==Certification Status==

{{Template:Compat Status "tested"}}





Testing of this product has been finalized January 16th, 2017.

==Version==
Firmware Version:
2.18.0.27.5

Hardware Version:
570v5

innovaphone Firmware:
11r2 sr22 IPVA[11.3648]

==Device Setup==

{| border="1"
!Tested feature
!Result
|----
|Register Device w/o specific configuration (requires DHCP)
|no
|----
|DHCP is default
|yes
|----
|DHCP yields timeserver and time displays correctly
|no
|----
|SNTP config has TZ string for timezone/dst autoconfig
|no
|----
|DHCP yields correct default gateway
|yes
|----
|Device supports magic registration (e.g. by serial)
|no
|----
|Fixed registrations works
|yes
|----
|Device registers w/o Extension (just by name)
|no
|----
|Device registers by name with non-latin1 characters (e.g. UserÄÖÜ)
|no
|----
|Device registers by extension
|yes
|----
|Device registers with password
|yes
|----
|Device registers multiple identities
|yes
|----
|2nd GK is supported (mit SIP??)
|no
|----
|Changing registrations between GK1 and GK2 (mit SIP??)
|no
|----
|PBX redirect (UserObject on Master/Phone at Slave registered)
|yes
|----
|Physical Location (@PBX) correct?
|yes
|----
|Device supports STUN protocol
|no
|----
|Device sends NAT - keepalive messages
|yes
|----
|Device usable in [[Howto:Hosting | hosting]] scenarios?
|yes
|----
|Device refreshes the PBX registration
|yes
|----
|Device supports SIP over TCP
|yes
|----
|Device supports SRTP
|no
|----
|Device supports SIPS (SIP over TLS)
|no
|----
|Device supports HTTPS
|yes
|----
|Device supports VAD (Voice activity detection)
|no
|----
|Device supports Auto-Answer (needed when used with CTI client)
|yes
|----
|Supported menu languages
|yes
|}

==Test Results==

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|call using g711a
|yes
|----
|call using g711u
|yes
|----
|call using g729
|yes
|----
|call using g722
|yes
|----
|Overlapped sending
|no
|----
|Device sets up an early media channel for incoming calls
|no
|----
|Device sets up an early media channel for outgoing calls
|no
|----
|Device shows called id number
|no
|----
|Device shows called id name
|no
|----
|Device shows called id display info
|no
|----
|Fax using T.38
|no
|----
|CGPN can be suppressed
|no
|----
|Reverse Media Negotiation
|yes
|----
|Device shows CDPN/CGPN on incoming call
|yes
|----
|Device shows CDPN/CGPN on outgoing call
|yes
|----
|Device shows connected number
|no
|----
|Device shows diverting number
|no
|----
|Device supports distinctive ringing
|yes
|----
|Device supports asymetric codec negotiation
|no
|----
|Device supports codec renegotiation during a conversation
|yes
|----
|Device shows correct display message in case of busy CDPN
|no
|----
|Device shows correct display message in case of not existing CDPN
|no
|----
|Device shows correct display message in case that the call is declined
|no
|----
|3party conference possible
|no
|----
|Device supports display updates during call(needed for Directory Search object)
|no
|----
|Long Time Call (>30 min) works?
|yes
|----
|Registration redirecting works?
|no
|----
|Incoming SRTP call - SRTP not enabled on DUT
|no
|----
|Incoming SRTP call - SRTP enabled on DUT
|no
|----
|Voice Quality OK?
|yes
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|DTMF tones sent correctly
|yes
|----
|DTMF tones received correctly
|yes
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|Device handles incoming hold correctly
|yes
|----
|Device can put a call on hold using correctly(inactive or sendonly)
|no
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|N/A
|----
||inno1 calls inno2. inno1 transfers to testphone.
|N/A
|N/A
|----
|inno1 calls testphone. inno1 transfers to inno2.
|N/A
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|}

=== Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|testphone makes call to a Broadcast Group. inno1 picks up.
|yes
|----
|inno1 makes call to a Broadcast Group. testphone picks up.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
|yes
|----
|inno1 makes call to a Waiting Queue. testphone picks up.
|yes
|}

=== DTMF Features ===

{| border="1"
!Tested feature
!Result
|----
|CFU Activate/Deactivate
|no
|----
|CFB Activate/Deactivate
|no
|----
|CFNR Activate/Deactivate
|no
|----
|Pickup Group
|no
|----
|Pickup Directed
|no
|----
|Park/Unpark
|no
|----
|Park To/Unpark From
|no
|----
|Call Completion Busy
|no
|----
|Call Completion Cancel
|no
|----
|Join Group/Leave Group
|no
|----
|Join All Groups/Leave All Groups
|no
|----
|Enable mobility/Disable mobility
|no
|----
|Enable mobility cw/Disable mobility cw
|no
|----
|Set presence
|no
|}

==Other Features==

===Directory===

{| border="1"
!Tested feature
!Result
|----
|Device built-in directory
|yes
|----
|Exists
|yes
|----
|Can be dialled from
|yes
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|yes
|}

{| border="1"
!Tested feature
!Result
|----
|External LDAP Server supported
|no
|----
|Can be dialled from
|no
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|no
|}

===Keys===

{| border="1"
!Tested feature
!Result
|----
|Device has speed dial keys
|yes
|----
|Device has programmable function keys
|yes
|----
|Device has partner keys
|yes
|}

===CTI Features (with SOAP / TAPI / myPBX) ===

{| border="1"
!Tested feature
!Result
|----
|User Call - outgoing call
|no
|----
|User Connect - Answer incoming call
|no
|----
|User Reject - Reject alerting call
|no
|----
|User Disconnect - Disconnect active call
|no
|----
|User Hold - Put connected call on hold
|no
|----
|User Hold Retrieve - Retrieve call on hold
|no
|----
|User Transfer - Transfer with Consult
|no
|----
|User Transfer - Transfer with Consult (Alerting only)
|no
|----
|User Transfer - Blind Transfer
|no
|----
|3PTY - Make 3rd Party Call
|no
|----
|Connected Number Update on Display
|no
|}

===UC Features===

{| border="1"
!Tested feature
!Result
|----
|Video calls possible?
|yes
|----
|Video conference possible? (max. amount of participants)
|no
|----
|Video Codecs
|yes
|----
|enable/disable video during call
|yes
|----
|Set own presence possible?
|no
|----
|See presence of others possible?
|no
|----
|chat with mypbx client possible?
|no
|----
|chat with same vendor client possible?
|no
|----
|send IM - messages to phones possible?
|no
|}

== Configuration ==

=== innovaphone configuration ===

The innovaphone Virtual Appliance user interface can be opened on any computer connected with the innovaphone Virtual Appliance. Start a web browser on your computer. Enter innovaphone Virtual Appliance in the address line of the browser. The innovaphone Virtual Appliance user interface opens and enter the password. In settings innovaphone Virtual Appliance go to: PBX > Objects and choose new (User).
[[Image:2N Helios IP innovaphone 1.PNG]]

Enter the Description, Long Name, Display Name, Name, Number, Password. Check Node, PBX and click Apply, OK.
[[Image:2N_Helios_IP_innovaphone_2.PNG]]

=== doorphone configuration ===

Open web browser and enter IP address of intercom (default: admin/2n). If you don´t know IP of your Intercom, you can use 2N Helios IP Network Scanner (download [https://www.2n.cz/en_GB/dashboard 2N website]). Go to Service – Phone – SIP 1 and fill Intercom Identity – Authentication – SIP Proxy – SIP Registrar and save settings. Connection between FRITZ! Box and 2N Helios IP is now ready. In directory you can set, which numbers you will call from 2N Helios IP (you can ad numbers from which are in the innovaphone Virtual Appliance).
[[Image:2N Helios IP hip1.PNG]]

Go to Service - Phone - Audio and set DTMF Receiving, Audio Codecs like described in the screenshot below.

[[Image:2N Helios IP hip2.PNG]]

[[Category:Compat|{{PAGENAME}}]]

Howto11r2:2N Helios IP - 2N - 3rd Party Product

2017-02-06T13:08:52Z

2ntestteam: /* Contact */

[[Image:2N logo new.png||200px|right]]

==Product Name==
[https://www.2n.cz/en_GB/products/intercoms 2N Helios IP Intercoms]

==Certification Status==





{{Template:Compat_Status_referral_product_new}}

Testing of this product has been finalized January 16th, 2017.

==Category==
{{Category:3rdParty_Terminals}}
[[Category:Referral Product|{{PAGENAME}}]]
[[Category:3rdParty_Terminals|{{PAGENAME}}]]

==Functions==
* Two way audio and video door entry communication solution over SIP
* Voice, video, keypad and proximity card access control system in one box
* Remote access control
* Relay contact to an electrical lock
* Upgradeable by Vandal Resistant cover
* Wide variety of models
* Remote PC configuration

==Version==

* Helios IP Firmware Version: 2.18.0.27.5
* Helios IP Hardware Version: 570v5
* innovaphone PBX Firmware Version: 11r2 sr22 IPVA[11.3648]

==Vendor==

[[Image:2N logo.png|150px]]

2N TELEKOMUNIKACE a.s.

Modřanská 621/72

143 01 Praha 4

Česká republika

[https://www.2n.cz/en_GB/dashboard 2N TELEKOMUNIKACE a.s.]

==Description==

The 2N Helios IP door intercoms can smartly replace traditional doorbell push-button speakerphone panels and all wiring, bells and home intercom installations in buildings with structured cabling. The intercoms provide more advanced and wider services than standard home phones. The installation is very easy, all you need is connect the intercom to the other LAN elements using a UTP cable and set necessary parameters.

Thanks to the integrated SIP protocol, the intercom can make use of all VoIP services: call forwarding at absence (to another office, VoiceMail or a cellular phone) or call transfer (from the secretary’s office to the required person, e.g.).

The intercoms are equipped with a programmable number of quick dial buttons for speed calling to the users whose numbers are included in the intercom Users list. Each of the quick dial buttons can be assigned up to three phone numbers, which can be dialled in parallel or sequentially. Thanks to an integrated time sheet it is possible to configure each of the buttons in such a way that the called party is always accessible and/or calls to selected phone numbers can be barred off the working hours.

Some 2N Helios IP models are equipped with a numeric keypad, which can be used as a code lock or a standard push-button phone.

The 2N Helios IP intercoms help LAN users scan the area in front of the camera via video streaming. Thanks to the full ONVIF support, the intercoms can become part of the Video Surveillance System in your facility.

The 2N Helios IP intercoms can be equipped with an RFID card reader for authorised access control and thus become a key part of your surveillance or attendance control systems.

The 2N Helios IP intercom is equipped with a relay switch (and, optionally, other relays and outputs), which controls the electric lock or other equipment connected to the intercom. Its activation time and method can be programmed flexibly: it can be activated by a code, automatically by a call, by pressing a button, and so on.

==Competitive Analysis==


2N Helios IP is a unique solution for modern house door entry comunication using IP technology. Unique selling points:

* Full SIP/H.264 video door entry system
* All in one box (Voice, video, access control, keypad)
* Additionally upgradeable and expandable
* Modern design
* Modular system
* Reliable product

==Summary==


The Helios IP - doorphone supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F|recommended product]].

Reports of Certifications:
* 01/2017 - For a detailed analysis of the Helios IP, please have a look at the [[Howto:2N_Helios_IP_-_2N_-_SIP_Testreport_2017|2N Helios IP - 2N - SIP Testreport 2017]].
* 10/2010 - The Helios IP was retested by its manufacturer 2N in November 2010 using actualized firmware and hardware. The test were completed successfully, no problems were found. For a detailed view of this report, please have a look at [[Howto:2N_Helios_IP_-_2N_-_vendor_Testreport]]
* 06/2008 - The video functionality of the Helios IP was also tested. With the V6 SR2 firmware only basic video calls were possible. For more information on this topic, please refer to: [[Howto:2N_Helios_IP_-_2N_-_SIP_Testreport]]

==Pricing==


Starting at 650 EUR GDPL.

==Contact==


{|
| Name: || Robert Urbánek
|-
| Position: || Product Manager
|-
| Company: || 2N Telekomunikace a.s.
|-
| Street: || Modřanská 621
|-
| Country/ZIP/City || CZ-14301 Praha 4
|-
| Tel: || +420 225271329
|-
| Mail: || [mailto:urbanek@2n.cz urbanek@2n.cz]
|}

[[Category:Compat|{{PAGENAME}}]]

File:2N Helios IP hip3.PNG

2017-02-06T13:00:45Z

2ntestteam:

Howto11r2:2N Helios IP - 2N - SIP Testreport 2017

2017-02-06T12:59:31Z

2ntestteam: /* doorphone configuration */

==Summary==
The Helios IP - doorphone supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F|recommended product]].

==Certification Status==

{{Template:Compat Status "tested"}}





Testing of this product has been finalized January 16th, 2017.

==Version==
Firmware Version:
2.18.0.27.5

Hardware Version:
570v5

innovaphone Firmware:
11r2 sr22 IPVA[11.3648]

==Device Setup==

{| border="1"
!Tested feature
!Result
|----
|Register Device w/o specific configuration (requires DHCP)
|no
|----
|DHCP is default
|yes
|----
|DHCP yields timeserver and time displays correctly
|no
|----
|SNTP config has TZ string for timezone/dst autoconfig
|no
|----
|DHCP yields correct default gateway
|yes
|----
|Device supports magic registration (e.g. by serial)
|no
|----
|Fixed registrations works
|yes
|----
|Device registers w/o Extension (just by name)
|no
|----
|Device registers by name with non-latin1 characters (e.g. UserÄÖÜ)
|no
|----
|Device registers by extension
|yes
|----
|Device registers with password
|yes
|----
|Device registers multiple identities
|yes
|----
|2nd GK is supported (mit SIP??)
|no
|----
|Changing registrations between GK1 and GK2 (mit SIP??)
|no
|----
|PBX redirect (UserObject on Master/Phone at Slave registered)
|yes
|----
|Physical Location (@PBX) correct?
|yes
|----
|Device supports STUN protocol
|no
|----
|Device sends NAT - keepalive messages
|yes
|----
|Device usable in [[Howto:Hosting | hosting]] scenarios?
|yes
|----
|Device refreshes the PBX registration
|yes
|----
|Device supports SIP over TCP
|yes
|----
|Device supports SRTP
|no
|----
|Device supports SIPS (SIP over TLS)
|no
|----
|Device supports HTTPS
|yes
|----
|Device supports VAD (Voice activity detection)
|no
|----
|Device supports Auto-Answer (needed when used with CTI client)
|yes
|----
|Supported menu languages
|yes
|}

==Test Results==

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|call using g711a
|yes
|----
|call using g711u
|yes
|----
|call using g729
|yes
|----
|call using g722
|yes
|----
|Overlapped sending
|no
|----
|Device sets up an early media channel for incoming calls
|no
|----
|Device sets up an early media channel for outgoing calls
|no
|----
|Device shows called id number
|no
|----
|Device shows called id name
|no
|----
|Device shows called id display info
|no
|----
|Fax using T.38
|no
|----
|CGPN can be suppressed
|no
|----
|Reverse Media Negotiation
|yes
|----
|Device shows CDPN/CGPN on incoming call
|yes
|----
|Device shows CDPN/CGPN on outgoing call
|yes
|----
|Device shows connected number
|no
|----
|Device shows diverting number
|no
|----
|Device supports distinctive ringing
|yes
|----
|Device supports asymetric codec negotiation
|no
|----
|Device supports codec renegotiation during a conversation
|yes
|----
|Device shows correct display message in case of busy CDPN
|no
|----
|Device shows correct display message in case of not existing CDPN
|no
|----
|Device shows correct display message in case that the call is declined
|no
|----
|3party conference possible
|no
|----
|Device supports display updates during call(needed for Directory Search object)
|no
|----
|Long Time Call (>30 min) works?
|yes
|----
|Registration redirecting works?
|no
|----
|Incoming SRTP call - SRTP not enabled on DUT
|no
|----
|Incoming SRTP call - SRTP enabled on DUT
|no
|----
|Voice Quality OK?
|yes
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|DTMF tones sent correctly
|yes
|----
|DTMF tones received correctly
|yes
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|Device handles incoming hold correctly
|yes
|----
|Device can put a call on hold using correctly(inactive or sendonly)
|no
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|N/A
|----
||inno1 calls inno2. inno1 transfers to testphone.
|N/A
|N/A
|----
|inno1 calls testphone. inno1 transfers to inno2.
|N/A
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|}

=== Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|testphone makes call to a Broadcast Group. inno1 picks up.
|yes
|----
|inno1 makes call to a Broadcast Group. testphone picks up.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
|yes
|----
|inno1 makes call to a Waiting Queue. testphone picks up.
|yes
|}

=== DTMF Features ===

{| border="1"
!Tested feature
!Result
|----
|CFU Activate/Deactivate
|no
|----
|CFB Activate/Deactivate
|no
|----
|CFNR Activate/Deactivate
|no
|----
|Pickup Group
|no
|----
|Pickup Directed
|no
|----
|Park/Unpark
|no
|----
|Park To/Unpark From
|no
|----
|Call Completion Busy
|no
|----
|Call Completion Cancel
|no
|----
|Join Group/Leave Group
|no
|----
|Join All Groups/Leave All Groups
|no
|----
|Enable mobility/Disable mobility
|no
|----
|Enable mobility cw/Disable mobility cw
|no
|----
|Set presence
|no
|}

==Other Features==

===Directory===

{| border="1"
!Tested feature
!Result
|----
|Device built-in directory
|yes
|----
|Exists
|yes
|----
|Can be dialled from
|yes
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|yes
|}

{| border="1"
!Tested feature
!Result
|----
|External LDAP Server supported
|no
|----
|Can be dialled from
|no
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|no
|}

===Keys===

{| border="1"
!Tested feature
!Result
|----
|Device has speed dial keys
|yes
|----
|Device has programmable function keys
|yes
|----
|Device has partner keys
|yes
|}

===CTI Features (with SOAP / TAPI / myPBX) ===

{| border="1"
!Tested feature
!Result
|----
|User Call - outgoing call
|no
|----
|User Connect - Answer incoming call
|no
|----
|User Reject - Reject alerting call
|no
|----
|User Disconnect - Disconnect active call
|no
|----
|User Hold - Put connected call on hold
|no
|----
|User Hold Retrieve - Retrieve call on hold
|no
|----
|User Transfer - Transfer with Consult
|no
|----
|User Transfer - Transfer with Consult (Alerting only)
|no
|----
|User Transfer - Blind Transfer
|no
|----
|3PTY - Make 3rd Party Call
|no
|----
|Connected Number Update on Display
|no
|}

===UC Features===

{| border="1"
!Tested feature
!Result
|----
|Video calls possible?
|yes
|----
|Video conference possible? (max. amount of participants)
|no
|----
|Video Codecs
|yes
|----
|enable/disable video during call
|yes
|----
|Set own presence possible?
|no
|----
|See presence of others possible?
|no
|----
|chat with mypbx client possible?
|no
|----
|chat with same vendor client possible?
|no
|----
|send IM - messages to phones possible?
|no
|}

== Configuration ==

=== innovaphone configuration ===

The innovaphone Virtual Appliance user interface can be opened on any computer connected with the innovaphone Virtual Appliance. Start a web browser on your computer. Enter innovaphone Virtual Appliance in the address line of the browser. The innovaphone Virtual Appliance user interface opens and enter the password. In settings innovaphone Virtual Appliance go to: PBX > Objects and choose new (User).
[[Image:2N Helios IP innovaphone 1.PNG]]

Enter the Description, Long Name, Display Name, Name, Number, Password. Check Node, PBX and click Apply, OK.
[[Image:2N_Helios_IP_innovaphone_2.PNG]]

=== doorphone configuration ===

Open web browser and enter IP address of intercom (default: admin/2n). If you don´t know IP of your Intercom, you can use 2N Helios IP Network Scanner (download [https://www.2n.cz/en_GB/dashboard 2N website]). Go to Service – Phone – SIP 1 and fill Intercom Identity – Authentication – SIP Proxy – SIP Registrar and save settings. Connection between FRITZ! Box and 2N Helios IP is now ready. In directory you can set, which numbers you will call from 2N Helios IP (you can ad numbers from which are in the innovaphone Virtual Appliance).
[[Image:2N Helios IP hip1.PNG]]

Go to Service - Phone - Audio and set DTMF Receiving, Audio Codecs like described in the screenshot below.

[[Image:2N Helios IP hip2.PNG]]

[[Category:Compat|{{PAGENAME}}]]

File:2N logo1.png

2017-02-06T12:47:10Z

2ntestteam:

File:2N Helios IP hip2.PNG

2017-02-06T12:44:05Z

2ntestteam:

Howto11r2:2N Helios IP - 2N - SIP Testreport 2017

2017-02-06T12:43:15Z

2ntestteam: /* doorphone configuration */

==Summary==
The Helios IP - doorphone supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F|recommended product]].

==Certification Status==

{{Template:Compat Status "tested"}}





Testing of this product has been finalized January 16th, 2017.

==Version==
Firmware Version:
2.18.0.27.5

Hardware Version:
570v5

innovaphone Firmware:
11r2 sr22 IPVA[11.3648]

==Device Setup==

{| border="1"
!Tested feature
!Result
|----
|Register Device w/o specific configuration (requires DHCP)
|no
|----
|DHCP is default
|yes
|----
|DHCP yields timeserver and time displays correctly
|no
|----
|SNTP config has TZ string for timezone/dst autoconfig
|no
|----
|DHCP yields correct default gateway
|yes
|----
|Device supports magic registration (e.g. by serial)
|no
|----
|Fixed registrations works
|yes
|----
|Device registers w/o Extension (just by name)
|no
|----
|Device registers by name with non-latin1 characters (e.g. UserÄÖÜ)
|no
|----
|Device registers by extension
|yes
|----
|Device registers with password
|yes
|----
|Device registers multiple identities
|yes
|----
|2nd GK is supported (mit SIP??)
|no
|----
|Changing registrations between GK1 and GK2 (mit SIP??)
|no
|----
|PBX redirect (UserObject on Master/Phone at Slave registered)
|yes
|----
|Physical Location (@PBX) correct?
|yes
|----
|Device supports STUN protocol
|no
|----
|Device sends NAT - keepalive messages
|yes
|----
|Device usable in [[Howto:Hosting | hosting]] scenarios?
|yes
|----
|Device refreshes the PBX registration
|yes
|----
|Device supports SIP over TCP
|yes
|----
|Device supports SRTP
|no
|----
|Device supports SIPS (SIP over TLS)
|no
|----
|Device supports HTTPS
|yes
|----
|Device supports VAD (Voice activity detection)
|no
|----
|Device supports Auto-Answer (needed when used with CTI client)
|yes
|----
|Supported menu languages
|yes
|}

==Test Results==

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|call using g711a
|yes
|----
|call using g711u
|yes
|----
|call using g729
|yes
|----
|call using g722
|yes
|----
|Overlapped sending
|no
|----
|Device sets up an early media channel for incoming calls
|no
|----
|Device sets up an early media channel for outgoing calls
|no
|----
|Device shows called id number
|no
|----
|Device shows called id name
|no
|----
|Device shows called id display info
|no
|----
|Fax using T.38
|no
|----
|CGPN can be suppressed
|no
|----
|Reverse Media Negotiation
|yes
|----
|Device shows CDPN/CGPN on incoming call
|yes
|----
|Device shows CDPN/CGPN on outgoing call
|yes
|----
|Device shows connected number
|no
|----
|Device shows diverting number
|no
|----
|Device supports distinctive ringing
|yes
|----
|Device supports asymetric codec negotiation
|no
|----
|Device supports codec renegotiation during a conversation
|yes
|----
|Device shows correct display message in case of busy CDPN
|no
|----
|Device shows correct display message in case of not existing CDPN
|no
|----
|Device shows correct display message in case that the call is declined
|no
|----
|3party conference possible
|no
|----
|Device supports display updates during call(needed for Directory Search object)
|no
|----
|Long Time Call (>30 min) works?
|yes
|----
|Registration redirecting works?
|no
|----
|Incoming SRTP call - SRTP not enabled on DUT
|no
|----
|Incoming SRTP call - SRTP enabled on DUT
|no
|----
|Voice Quality OK?
|yes
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|DTMF tones sent correctly
|yes
|----
|DTMF tones received correctly
|yes
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|Device handles incoming hold correctly
|yes
|----
|Device can put a call on hold using correctly(inactive or sendonly)
|no
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|N/A
|----
||inno1 calls inno2. inno1 transfers to testphone.
|N/A
|N/A
|----
|inno1 calls testphone. inno1 transfers to inno2.
|N/A
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|}

=== Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|testphone makes call to a Broadcast Group. inno1 picks up.
|yes
|----
|inno1 makes call to a Broadcast Group. testphone picks up.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
|yes
|----
|inno1 makes call to a Waiting Queue. testphone picks up.
|yes
|}

=== DTMF Features ===

{| border="1"
!Tested feature
!Result
|----
|CFU Activate/Deactivate
|no
|----
|CFB Activate/Deactivate
|no
|----
|CFNR Activate/Deactivate
|no
|----
|Pickup Group
|no
|----
|Pickup Directed
|no
|----
|Park/Unpark
|no
|----
|Park To/Unpark From
|no
|----
|Call Completion Busy
|no
|----
|Call Completion Cancel
|no
|----
|Join Group/Leave Group
|no
|----
|Join All Groups/Leave All Groups
|no
|----
|Enable mobility/Disable mobility
|no
|----
|Enable mobility cw/Disable mobility cw
|no
|----
|Set presence
|no
|}

==Other Features==

===Directory===

{| border="1"
!Tested feature
!Result
|----
|Device built-in directory
|yes
|----
|Exists
|yes
|----
|Can be dialled from
|yes
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|yes
|}

{| border="1"
!Tested feature
!Result
|----
|External LDAP Server supported
|no
|----
|Can be dialled from
|no
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|no
|}

===Keys===

{| border="1"
!Tested feature
!Result
|----
|Device has speed dial keys
|yes
|----
|Device has programmable function keys
|yes
|----
|Device has partner keys
|yes
|}

===CTI Features (with SOAP / TAPI / myPBX) ===

{| border="1"
!Tested feature
!Result
|----
|User Call - outgoing call
|no
|----
|User Connect - Answer incoming call
|no
|----
|User Reject - Reject alerting call
|no
|----
|User Disconnect - Disconnect active call
|no
|----
|User Hold - Put connected call on hold
|no
|----
|User Hold Retrieve - Retrieve call on hold
|no
|----
|User Transfer - Transfer with Consult
|no
|----
|User Transfer - Transfer with Consult (Alerting only)
|no
|----
|User Transfer - Blind Transfer
|no
|----
|3PTY - Make 3rd Party Call
|no
|----
|Connected Number Update on Display
|no
|}

===UC Features===

{| border="1"
!Tested feature
!Result
|----
|Video calls possible?
|yes
|----
|Video conference possible? (max. amount of participants)
|no
|----
|Video Codecs
|yes
|----
|enable/disable video during call
|yes
|----
|Set own presence possible?
|no
|----
|See presence of others possible?
|no
|----
|chat with mypbx client possible?
|no
|----
|chat with same vendor client possible?
|no
|----
|send IM - messages to phones possible?
|no
|}

== Configuration ==

=== innovaphone configuration ===

The innovaphone Virtual Appliance user interface can be opened on any computer connected with the innovaphone Virtual Appliance. Start a web browser on your computer. Enter innovaphone Virtual Appliance in the address line of the browser. The innovaphone Virtual Appliance user interface opens and enter the password. In settings innovaphone Virtual Appliance go to: PBX > Objects and choose new (User).
[[Image:2N Helios IP innovaphone 1.PNG]]

Enter the Description, Long Name, Display Name, Name, Number, Password. Check Node, PBX and click Apply, OK.
[[Image:2N_Helios_IP_innovaphone_2.PNG]]

=== doorphone configuration ===

Open web browser and enter IP address of intercom (default: admin/2n). If you don´t know IP of your Intercom, you can use 2N Helios IP Network Scanner (download [https://www.2n.cz/en_GB/dashboard 2N website]). Go to Service – Phone – SIP 1 and fill Intercom Identity – Authentication – SIP Proxy – SIP Registrar and save settings. Connection between FRITZ! Box and 2N Helios IP is now ready. In directory you can set, which numbers you will call from 2N Helios IP (you can ad numbers from which are in the innovaphone Virtual Appliance).
[[Image:2N Helios IP hip1.PNG]]

Go to Service - Phone - Audio ans set DTMF Receiving like described in the screenshot below.

[[Image:2N Helios IP hip2.PNG]]

[[Category:Compat|{{PAGENAME}}]]

Howto11r2:2N Helios IP - 2N - 3rd Party Product

2017-02-06T12:38:31Z

2ntestteam: /* Vendor */

[[Image:2N logo new.png||200px|right]]

==Product Name==
[https://www.2n.cz/en_GB/products/intercoms 2N Helios IP Intercoms]

==Certification Status==





{{Template:Compat_Status_referral_product_new}}

Testing of this product has been finalized January 16th, 2017.

==Category==
{{Category:3rdParty_Terminals}}
[[Category:Referral Product|{{PAGENAME}}]]
[[Category:3rdParty_Terminals|{{PAGENAME}}]]

==Functions==
* Two way audio and video door entry communication solution over SIP
* Voice, video, keypad and proximity card access control system in one box
* Remote access control
* Relay contact to an electrical lock
* Upgradeable by Vandal Resistant cover
* Wide variety of models
* Remote PC configuration

==Version==

* Helios IP Firmware Version: 2.18.0.27.5
* Helios IP Hardware Version: 570v5
* innovaphone PBX Firmware Version: 11r2 sr22 IPVA[11.3648]

==Vendor==

[[Image:2N logo.png|150px]]

2N TELEKOMUNIKACE a.s.

Modřanská 621/72

143 01 Praha 4

Česká republika

[https://www.2n.cz/en_GB/dashboard 2N TELEKOMUNIKACE a.s.]

==Description==

The 2N Helios IP door intercoms can smartly replace traditional doorbell push-button speakerphone panels and all wiring, bells and home intercom installations in buildings with structured cabling. The intercoms provide more advanced and wider services than standard home phones. The installation is very easy, all you need is connect the intercom to the other LAN elements using a UTP cable and set necessary parameters.

Thanks to the integrated SIP protocol, the intercom can make use of all VoIP services: call forwarding at absence (to another office, VoiceMail or a cellular phone) or call transfer (from the secretary’s office to the required person, e.g.).

The intercoms are equipped with a programmable number of quick dial buttons for speed calling to the users whose numbers are included in the intercom Users list. Each of the quick dial buttons can be assigned up to three phone numbers, which can be dialled in parallel or sequentially. Thanks to an integrated time sheet it is possible to configure each of the buttons in such a way that the called party is always accessible and/or calls to selected phone numbers can be barred off the working hours.

Some 2N Helios IP models are equipped with a numeric keypad, which can be used as a code lock or a standard push-button phone.

The 2N Helios IP intercoms help LAN users scan the area in front of the camera via video streaming. Thanks to the full ONVIF support, the intercoms can become part of the Video Surveillance System in your facility.

The 2N Helios IP intercoms can be equipped with an RFID card reader for authorised access control and thus become a key part of your surveillance or attendance control systems.

The 2N Helios IP intercom is equipped with a relay switch (and, optionally, other relays and outputs), which controls the electric lock or other equipment connected to the intercom. Its activation time and method can be programmed flexibly: it can be activated by a code, automatically by a call, by pressing a button, and so on.

==Competitive Analysis==


2N Helios IP is a unique solution for modern house door entry comunication using IP technology. Unique selling points:

* Full SIP/H.264 video door entry system
* All in one box (Voice, video, access control, keypad)
* Additionally upgradeable and expandable
* Modern design
* Modular system
* Reliable product

==Summary==


The Helios IP - doorphone supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F|recommended product]].

Reports of Certifications:
* 01/2017 - For a detailed analysis of the Helios IP, please have a look at the [[Howto:2N_Helios_IP_-_2N_-_SIP_Testreport_2017|2N Helios IP - 2N - SIP Testreport 2017]].
* 10/2010 - The Helios IP was retested by its manufacturer 2N in November 2010 using actualized firmware and hardware. The test were completed successfully, no problems were found. For a detailed view of this report, please have a look at [[Howto:2N_Helios_IP_-_2N_-_vendor_Testreport]]
* 06/2008 - The video functionality of the Helios IP was also tested. With the V6 SR2 firmware only basic video calls were possible. For more information on this topic, please refer to: [[Howto:2N_Helios_IP_-_2N_-_SIP_Testreport]]

==Pricing==


Starting at 650 EUR GDPL.

==Contact==


{|
| Name: || Robert Urbánek
|-
| Position: || Product Manager
|-
| Company: || 2N Telekomunikace a.s.
|-
| Street: || Modranska 621
|-
| Country/ZIP/City || CZ-14301 Praha 4
|-
| Tel: || +420 225271329
|-
| Mail: || [mailto:urbanek@2n.cz urbanek@2n.cz]
|}

[[Category:Compat|{{PAGENAME}}]]

File:2N Helios IP - 2N hip2.PNG

2017-02-06T12:36:16Z

2ntestteam:

Howto11r2:2N Helios IP - 2N - SIP Testreport 2017

2017-02-06T12:35:56Z

2ntestteam: /* Configuration */

==Summary==
The Helios IP - doorphone supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F|recommended product]].

==Certification Status==

{{Template:Compat Status "tested"}}





Testing of this product has been finalized January 16th, 2017.

==Version==
Firmware Version:
2.18.0.27.5

Hardware Version:
570v5

innovaphone Firmware:
11r2 sr22 IPVA[11.3648]

==Device Setup==

{| border="1"
!Tested feature
!Result
|----
|Register Device w/o specific configuration (requires DHCP)
|no
|----
|DHCP is default
|yes
|----
|DHCP yields timeserver and time displays correctly
|no
|----
|SNTP config has TZ string for timezone/dst autoconfig
|no
|----
|DHCP yields correct default gateway
|yes
|----
|Device supports magic registration (e.g. by serial)
|no
|----
|Fixed registrations works
|yes
|----
|Device registers w/o Extension (just by name)
|no
|----
|Device registers by name with non-latin1 characters (e.g. UserÄÖÜ)
|no
|----
|Device registers by extension
|yes
|----
|Device registers with password
|yes
|----
|Device registers multiple identities
|yes
|----
|2nd GK is supported (mit SIP??)
|no
|----
|Changing registrations between GK1 and GK2 (mit SIP??)
|no
|----
|PBX redirect (UserObject on Master/Phone at Slave registered)
|yes
|----
|Physical Location (@PBX) correct?
|yes
|----
|Device supports STUN protocol
|no
|----
|Device sends NAT - keepalive messages
|yes
|----
|Device usable in [[Howto:Hosting | hosting]] scenarios?
|yes
|----
|Device refreshes the PBX registration
|yes
|----
|Device supports SIP over TCP
|yes
|----
|Device supports SRTP
|no
|----
|Device supports SIPS (SIP over TLS)
|no
|----
|Device supports HTTPS
|yes
|----
|Device supports VAD (Voice activity detection)
|no
|----
|Device supports Auto-Answer (needed when used with CTI client)
|yes
|----
|Supported menu languages
|yes
|}

==Test Results==

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|call using g711a
|yes
|----
|call using g711u
|yes
|----
|call using g729
|yes
|----
|call using g722
|yes
|----
|Overlapped sending
|no
|----
|Device sets up an early media channel for incoming calls
|no
|----
|Device sets up an early media channel for outgoing calls
|no
|----
|Device shows called id number
|no
|----
|Device shows called id name
|no
|----
|Device shows called id display info
|no
|----
|Fax using T.38
|no
|----
|CGPN can be suppressed
|no
|----
|Reverse Media Negotiation
|yes
|----
|Device shows CDPN/CGPN on incoming call
|yes
|----
|Device shows CDPN/CGPN on outgoing call
|yes
|----
|Device shows connected number
|no
|----
|Device shows diverting number
|no
|----
|Device supports distinctive ringing
|yes
|----
|Device supports asymetric codec negotiation
|no
|----
|Device supports codec renegotiation during a conversation
|yes
|----
|Device shows correct display message in case of busy CDPN
|no
|----
|Device shows correct display message in case of not existing CDPN
|no
|----
|Device shows correct display message in case that the call is declined
|no
|----
|3party conference possible
|no
|----
|Device supports display updates during call(needed for Directory Search object)
|no
|----
|Long Time Call (>30 min) works?
|yes
|----
|Registration redirecting works?
|no
|----
|Incoming SRTP call - SRTP not enabled on DUT
|no
|----
|Incoming SRTP call - SRTP enabled on DUT
|no
|----
|Voice Quality OK?
|yes
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|DTMF tones sent correctly
|yes
|----
|DTMF tones received correctly
|yes
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|Device handles incoming hold correctly
|yes
|----
|Device can put a call on hold using correctly(inactive or sendonly)
|no
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|N/A
|----
||inno1 calls inno2. inno1 transfers to testphone.
|N/A
|N/A
|----
|inno1 calls testphone. inno1 transfers to inno2.
|N/A
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|}

=== Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|testphone makes call to a Broadcast Group. inno1 picks up.
|yes
|----
|inno1 makes call to a Broadcast Group. testphone picks up.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
|yes
|----
|inno1 makes call to a Waiting Queue. testphone picks up.
|yes
|}

=== DTMF Features ===

{| border="1"
!Tested feature
!Result
|----
|CFU Activate/Deactivate
|no
|----
|CFB Activate/Deactivate
|no
|----
|CFNR Activate/Deactivate
|no
|----
|Pickup Group
|no
|----
|Pickup Directed
|no
|----
|Park/Unpark
|no
|----
|Park To/Unpark From
|no
|----
|Call Completion Busy
|no
|----
|Call Completion Cancel
|no
|----
|Join Group/Leave Group
|no
|----
|Join All Groups/Leave All Groups
|no
|----
|Enable mobility/Disable mobility
|no
|----
|Enable mobility cw/Disable mobility cw
|no
|----
|Set presence
|no
|}

==Other Features==

===Directory===

{| border="1"
!Tested feature
!Result
|----
|Device built-in directory
|yes
|----
|Exists
|yes
|----
|Can be dialled from
|yes
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|yes
|}

{| border="1"
!Tested feature
!Result
|----
|External LDAP Server supported
|no
|----
|Can be dialled from
|no
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|no
|}

===Keys===

{| border="1"
!Tested feature
!Result
|----
|Device has speed dial keys
|yes
|----
|Device has programmable function keys
|yes
|----
|Device has partner keys
|yes
|}

===CTI Features (with SOAP / TAPI / myPBX) ===

{| border="1"
!Tested feature
!Result
|----
|User Call - outgoing call
|no
|----
|User Connect - Answer incoming call
|no
|----
|User Reject - Reject alerting call
|no
|----
|User Disconnect - Disconnect active call
|no
|----
|User Hold - Put connected call on hold
|no
|----
|User Hold Retrieve - Retrieve call on hold
|no
|----
|User Transfer - Transfer with Consult
|no
|----
|User Transfer - Transfer with Consult (Alerting only)
|no
|----
|User Transfer - Blind Transfer
|no
|----
|3PTY - Make 3rd Party Call
|no
|----
|Connected Number Update on Display
|no
|}

===UC Features===

{| border="1"
!Tested feature
!Result
|----
|Video calls possible?
|yes
|----
|Video conference possible? (max. amount of participants)
|no
|----
|Video Codecs
|yes
|----
|enable/disable video during call
|yes
|----
|Set own presence possible?
|no
|----
|See presence of others possible?
|no
|----
|chat with mypbx client possible?
|no
|----
|chat with same vendor client possible?
|no
|----
|send IM - messages to phones possible?
|no
|}

== Configuration ==

=== innovaphone configuration ===

The innovaphone Virtual Appliance user interface can be opened on any computer connected with the innovaphone Virtual Appliance. Start a web browser on your computer. Enter innovaphone Virtual Appliance in the address line of the browser. The innovaphone Virtual Appliance user interface opens and enter the password. In settings innovaphone Virtual Appliance go to: PBX > Objects and choose new (User).
[[Image:2N Helios IP innovaphone 1.PNG]]

Enter the Description, Long Name, Display Name, Name, Number, Password. Check Node, PBX and click Apply, OK.
[[Image:2N_Helios_IP_innovaphone_2.PNG]]

=== doorphone configuration ===

To register the doorphone at the innovaphone PBX you must first configure the SIP-Settings.

[[Image:2N Helios IP hip1.PNG]]

In order to be able to send and receive DTMF tones on the doorphone, please configure the audio codecs like described in the screenshot below.

[[Image:2N Helios IP - 2N - SIP Testreport 2.PNG]]

[[Category:Compat|{{PAGENAME}}]]

File:2N Helios IP hip1.PNG

2017-02-06T12:34:22Z

2ntestteam:

Howto11r2:2N Helios IP - 2N - SIP Testreport 2017

2017-02-06T12:33:36Z

2ntestteam: /* Configuration */

==Summary==
The Helios IP - doorphone supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F|recommended product]].

==Certification Status==

{{Template:Compat Status "tested"}}





Testing of this product has been finalized January 16th, 2017.

==Version==
Firmware Version:
2.18.0.27.5

Hardware Version:
570v5

innovaphone Firmware:
11r2 sr22 IPVA[11.3648]

==Device Setup==

{| border="1"
!Tested feature
!Result
|----
|Register Device w/o specific configuration (requires DHCP)
|no
|----
|DHCP is default
|yes
|----
|DHCP yields timeserver and time displays correctly
|no
|----
|SNTP config has TZ string for timezone/dst autoconfig
|no
|----
|DHCP yields correct default gateway
|yes
|----
|Device supports magic registration (e.g. by serial)
|no
|----
|Fixed registrations works
|yes
|----
|Device registers w/o Extension (just by name)
|no
|----
|Device registers by name with non-latin1 characters (e.g. UserÄÖÜ)
|no
|----
|Device registers by extension
|yes
|----
|Device registers with password
|yes
|----
|Device registers multiple identities
|yes
|----
|2nd GK is supported (mit SIP??)
|no
|----
|Changing registrations between GK1 and GK2 (mit SIP??)
|no
|----
|PBX redirect (UserObject on Master/Phone at Slave registered)
|yes
|----
|Physical Location (@PBX) correct?
|yes
|----
|Device supports STUN protocol
|no
|----
|Device sends NAT - keepalive messages
|yes
|----
|Device usable in [[Howto:Hosting | hosting]] scenarios?
|yes
|----
|Device refreshes the PBX registration
|yes
|----
|Device supports SIP over TCP
|yes
|----
|Device supports SRTP
|no
|----
|Device supports SIPS (SIP over TLS)
|no
|----
|Device supports HTTPS
|yes
|----
|Device supports VAD (Voice activity detection)
|no
|----
|Device supports Auto-Answer (needed when used with CTI client)
|yes
|----
|Supported menu languages
|yes
|}

==Test Results==

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|call using g711a
|yes
|----
|call using g711u
|yes
|----
|call using g729
|yes
|----
|call using g722
|yes
|----
|Overlapped sending
|no
|----
|Device sets up an early media channel for incoming calls
|no
|----
|Device sets up an early media channel for outgoing calls
|no
|----
|Device shows called id number
|no
|----
|Device shows called id name
|no
|----
|Device shows called id display info
|no
|----
|Fax using T.38
|no
|----
|CGPN can be suppressed
|no
|----
|Reverse Media Negotiation
|yes
|----
|Device shows CDPN/CGPN on incoming call
|yes
|----
|Device shows CDPN/CGPN on outgoing call
|yes
|----
|Device shows connected number
|no
|----
|Device shows diverting number
|no
|----
|Device supports distinctive ringing
|yes
|----
|Device supports asymetric codec negotiation
|no
|----
|Device supports codec renegotiation during a conversation
|yes
|----
|Device shows correct display message in case of busy CDPN
|no
|----
|Device shows correct display message in case of not existing CDPN
|no
|----
|Device shows correct display message in case that the call is declined
|no
|----
|3party conference possible
|no
|----
|Device supports display updates during call(needed for Directory Search object)
|no
|----
|Long Time Call (>30 min) works?
|yes
|----
|Registration redirecting works?
|no
|----
|Incoming SRTP call - SRTP not enabled on DUT
|no
|----
|Incoming SRTP call - SRTP enabled on DUT
|no
|----
|Voice Quality OK?
|yes
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|DTMF tones sent correctly
|yes
|----
|DTMF tones received correctly
|yes
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|Device handles incoming hold correctly
|yes
|----
|Device can put a call on hold using correctly(inactive or sendonly)
|no
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|N/A
|----
||inno1 calls inno2. inno1 transfers to testphone.
|N/A
|N/A
|----
|inno1 calls testphone. inno1 transfers to inno2.
|N/A
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|}

=== Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|testphone makes call to a Broadcast Group. inno1 picks up.
|yes
|----
|inno1 makes call to a Broadcast Group. testphone picks up.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
|yes
|----
|inno1 makes call to a Waiting Queue. testphone picks up.
|yes
|}

=== DTMF Features ===

{| border="1"
!Tested feature
!Result
|----
|CFU Activate/Deactivate
|no
|----
|CFB Activate/Deactivate
|no
|----
|CFNR Activate/Deactivate
|no
|----
|Pickup Group
|no
|----
|Pickup Directed
|no
|----
|Park/Unpark
|no
|----
|Park To/Unpark From
|no
|----
|Call Completion Busy
|no
|----
|Call Completion Cancel
|no
|----
|Join Group/Leave Group
|no
|----
|Join All Groups/Leave All Groups
|no
|----
|Enable mobility/Disable mobility
|no
|----
|Enable mobility cw/Disable mobility cw
|no
|----
|Set presence
|no
|}

==Other Features==

===Directory===

{| border="1"
!Tested feature
!Result
|----
|Device built-in directory
|yes
|----
|Exists
|yes
|----
|Can be dialled from
|yes
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|yes
|}

{| border="1"
!Tested feature
!Result
|----
|External LDAP Server supported
|no
|----
|Can be dialled from
|no
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|no
|}

===Keys===

{| border="1"
!Tested feature
!Result
|----
|Device has speed dial keys
|yes
|----
|Device has programmable function keys
|yes
|----
|Device has partner keys
|yes
|}

===CTI Features (with SOAP / TAPI / myPBX) ===

{| border="1"
!Tested feature
!Result
|----
|User Call - outgoing call
|no
|----
|User Connect - Answer incoming call
|no
|----
|User Reject - Reject alerting call
|no
|----
|User Disconnect - Disconnect active call
|no
|----
|User Hold - Put connected call on hold
|no
|----
|User Hold Retrieve - Retrieve call on hold
|no
|----
|User Transfer - Transfer with Consult
|no
|----
|User Transfer - Transfer with Consult (Alerting only)
|no
|----
|User Transfer - Blind Transfer
|no
|----
|3PTY - Make 3rd Party Call
|no
|----
|Connected Number Update on Display
|no
|}

===UC Features===

{| border="1"
!Tested feature
!Result
|----
|Video calls possible?
|yes
|----
|Video conference possible? (max. amount of participants)
|no
|----
|Video Codecs
|yes
|----
|enable/disable video during call
|yes
|----
|Set own presence possible?
|no
|----
|See presence of others possible?
|no
|----
|chat with mypbx client possible?
|no
|----
|chat with same vendor client possible?
|no
|----
|send IM - messages to phones possible?
|no
|}

== Configuration ==

=== innovaphone configuration ===

The innovaphone Virtual Appliance user interface can be opened on any computer connected with the innovaphone Virtual Appliance. Start a web browser on your computer. Enter innovaphone Virtual Appliance in the address line of the browser. The innovaphone Virtual Appliance user interface opens and enter the password. In settings innovaphone Virtual Appliance go to: PBX > Objects and choose new (User).
[[Image:2N Helios IP innovaphone 1.PNG]]

Enter the Description, Long Name, Display Name, Name, Number, Password. Check Node, PBX and click Apply, OK.
[[Image:2N_Helios_IP_innovaphone_2.PNG]]

=== doorphone configuration ===

To register the doorphone at the innovaphone PBX you must first configure the SIP-Settings.

[[Image:2N Helios IP - 2N - SIP Testreport 3.PNG]]

In order to be able to send and receive DTMF tones on the doorphone, please configure the audio codecs like described in the screenshot below.

[[Image:2N Helios IP - 2N - SIP Testreport 2.PNG]]

[[Category:Compat|{{PAGENAME}}]]

Howto11r2:2N Helios IP - 2N - SIP Testreport 2017

2017-02-06T12:29:53Z

2ntestteam: /* Configuration */

==Summary==
The Helios IP - doorphone supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F|recommended product]].

==Certification Status==

{{Template:Compat Status "tested"}}





Testing of this product has been finalized January 16th, 2017.

==Version==
Firmware Version:
2.18.0.27.5

Hardware Version:
570v5

innovaphone Firmware:
11r2 sr22 IPVA[11.3648]

==Device Setup==

{| border="1"
!Tested feature
!Result
|----
|Register Device w/o specific configuration (requires DHCP)
|no
|----
|DHCP is default
|yes
|----
|DHCP yields timeserver and time displays correctly
|no
|----
|SNTP config has TZ string for timezone/dst autoconfig
|no
|----
|DHCP yields correct default gateway
|yes
|----
|Device supports magic registration (e.g. by serial)
|no
|----
|Fixed registrations works
|yes
|----
|Device registers w/o Extension (just by name)
|no
|----
|Device registers by name with non-latin1 characters (e.g. UserÄÖÜ)
|no
|----
|Device registers by extension
|yes
|----
|Device registers with password
|yes
|----
|Device registers multiple identities
|yes
|----
|2nd GK is supported (mit SIP??)
|no
|----
|Changing registrations between GK1 and GK2 (mit SIP??)
|no
|----
|PBX redirect (UserObject on Master/Phone at Slave registered)
|yes
|----
|Physical Location (@PBX) correct?
|yes
|----
|Device supports STUN protocol
|no
|----
|Device sends NAT - keepalive messages
|yes
|----
|Device usable in [[Howto:Hosting | hosting]] scenarios?
|yes
|----
|Device refreshes the PBX registration
|yes
|----
|Device supports SIP over TCP
|yes
|----
|Device supports SRTP
|no
|----
|Device supports SIPS (SIP over TLS)
|no
|----
|Device supports HTTPS
|yes
|----
|Device supports VAD (Voice activity detection)
|no
|----
|Device supports Auto-Answer (needed when used with CTI client)
|yes
|----
|Supported menu languages
|yes
|}

==Test Results==

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|call using g711a
|yes
|----
|call using g711u
|yes
|----
|call using g729
|yes
|----
|call using g722
|yes
|----
|Overlapped sending
|no
|----
|Device sets up an early media channel for incoming calls
|no
|----
|Device sets up an early media channel for outgoing calls
|no
|----
|Device shows called id number
|no
|----
|Device shows called id name
|no
|----
|Device shows called id display info
|no
|----
|Fax using T.38
|no
|----
|CGPN can be suppressed
|no
|----
|Reverse Media Negotiation
|yes
|----
|Device shows CDPN/CGPN on incoming call
|yes
|----
|Device shows CDPN/CGPN on outgoing call
|yes
|----
|Device shows connected number
|no
|----
|Device shows diverting number
|no
|----
|Device supports distinctive ringing
|yes
|----
|Device supports asymetric codec negotiation
|no
|----
|Device supports codec renegotiation during a conversation
|yes
|----
|Device shows correct display message in case of busy CDPN
|no
|----
|Device shows correct display message in case of not existing CDPN
|no
|----
|Device shows correct display message in case that the call is declined
|no
|----
|3party conference possible
|no
|----
|Device supports display updates during call(needed for Directory Search object)
|no
|----
|Long Time Call (>30 min) works?
|yes
|----
|Registration redirecting works?
|no
|----
|Incoming SRTP call - SRTP not enabled on DUT
|no
|----
|Incoming SRTP call - SRTP enabled on DUT
|no
|----
|Voice Quality OK?
|yes
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|DTMF tones sent correctly
|yes
|----
|DTMF tones received correctly
|yes
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|Device handles incoming hold correctly
|yes
|----
|Device can put a call on hold using correctly(inactive or sendonly)
|no
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|N/A
|----
||inno1 calls inno2. inno1 transfers to testphone.
|N/A
|N/A
|----
|inno1 calls testphone. inno1 transfers to inno2.
|N/A
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|}

=== Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|testphone makes call to a Broadcast Group. inno1 picks up.
|yes
|----
|inno1 makes call to a Broadcast Group. testphone picks up.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
|yes
|----
|inno1 makes call to a Waiting Queue. testphone picks up.
|yes
|}

=== DTMF Features ===

{| border="1"
!Tested feature
!Result
|----
|CFU Activate/Deactivate
|no
|----
|CFB Activate/Deactivate
|no
|----
|CFNR Activate/Deactivate
|no
|----
|Pickup Group
|no
|----
|Pickup Directed
|no
|----
|Park/Unpark
|no
|----
|Park To/Unpark From
|no
|----
|Call Completion Busy
|no
|----
|Call Completion Cancel
|no
|----
|Join Group/Leave Group
|no
|----
|Join All Groups/Leave All Groups
|no
|----
|Enable mobility/Disable mobility
|no
|----
|Enable mobility cw/Disable mobility cw
|no
|----
|Set presence
|no
|}

==Other Features==

===Directory===

{| border="1"
!Tested feature
!Result
|----
|Device built-in directory
|yes
|----
|Exists
|yes
|----
|Can be dialled from
|yes
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|yes
|}

{| border="1"
!Tested feature
!Result
|----
|External LDAP Server supported
|no
|----
|Can be dialled from
|no
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|no
|}

===Keys===

{| border="1"
!Tested feature
!Result
|----
|Device has speed dial keys
|yes
|----
|Device has programmable function keys
|yes
|----
|Device has partner keys
|yes
|}

===CTI Features (with SOAP / TAPI / myPBX) ===

{| border="1"
!Tested feature
!Result
|----
|User Call - outgoing call
|no
|----
|User Connect - Answer incoming call
|no
|----
|User Reject - Reject alerting call
|no
|----
|User Disconnect - Disconnect active call
|no
|----
|User Hold - Put connected call on hold
|no
|----
|User Hold Retrieve - Retrieve call on hold
|no
|----
|User Transfer - Transfer with Consult
|no
|----
|User Transfer - Transfer with Consult (Alerting only)
|no
|----
|User Transfer - Blind Transfer
|no
|----
|3PTY - Make 3rd Party Call
|no
|----
|Connected Number Update on Display
|no
|}

===UC Features===

{| border="1"
!Tested feature
!Result
|----
|Video calls possible?
|yes
|----
|Video conference possible? (max. amount of participants)
|no
|----
|Video Codecs
|yes
|----
|enable/disable video during call
|yes
|----
|Set own presence possible?
|no
|----
|See presence of others possible?
|no
|----
|chat with mypbx client possible?
|no
|----
|chat with same vendor client possible?
|no
|----
|send IM - messages to phones possible?
|no
|}

== Configuration ==

=== innovaphone configuration ===

The innovaphone Virtual Appliance user interface can be opened on any computer connected with the innovaphone Virtual Appliance. Start a web browser on your computer. Enter innovaphone Virtual Appliance in the address line of the browser. The innovaphone Virtual Appliance user interface opens and enter the password. In settings innovaphone Virtual Appliance go to: PBX > Objects and choose new (User).
[[Image:2N Helios IP innovaphone 1.PNG]]
Enter the Description, Long Name, Display Name, Name, Number, Password. Check Node, PBX and click Apply, OK.
[[Image:2N_Helios_IP_innovaphone_2.PNG]]

=== doorphone configuration ===

To register the doorphone at the innovaphone PBX you must first configure the SIP-Settings.

[[Image:2N Helios IP - 2N - SIP Testreport 3.PNG]]

In order to be able to send and receive DTMF tones on the doorphone, please configure the audio codecs like described in the screenshot below.

[[Image:2N Helios IP - 2N - SIP Testreport 2.PNG]]

[[Category:Compat|{{PAGENAME}}]]

File:2N Helios IP innovaphone 2.PNG

2017-02-06T12:29:19Z

2ntestteam:

File:2N Helios IP innovaphone 1.PNG

2017-02-06T12:27:29Z

2ntestteam:

Howto11r2:2N Helios IP - 2N - SIP Testreport 2017

2017-02-06T12:18:50Z

2ntestteam: /* Configuration */

==Summary==
The Helios IP - doorphone supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F|recommended product]].

==Certification Status==

{{Template:Compat Status "tested"}}





Testing of this product has been finalized January 16th, 2017.

==Version==
Firmware Version:
2.18.0.27.5

Hardware Version:
570v5

innovaphone Firmware:
11r2 sr22 IPVA[11.3648]

==Device Setup==

{| border="1"
!Tested feature
!Result
|----
|Register Device w/o specific configuration (requires DHCP)
|no
|----
|DHCP is default
|yes
|----
|DHCP yields timeserver and time displays correctly
|no
|----
|SNTP config has TZ string for timezone/dst autoconfig
|no
|----
|DHCP yields correct default gateway
|yes
|----
|Device supports magic registration (e.g. by serial)
|no
|----
|Fixed registrations works
|yes
|----
|Device registers w/o Extension (just by name)
|no
|----
|Device registers by name with non-latin1 characters (e.g. UserÄÖÜ)
|no
|----
|Device registers by extension
|yes
|----
|Device registers with password
|yes
|----
|Device registers multiple identities
|yes
|----
|2nd GK is supported (mit SIP??)
|no
|----
|Changing registrations between GK1 and GK2 (mit SIP??)
|no
|----
|PBX redirect (UserObject on Master/Phone at Slave registered)
|yes
|----
|Physical Location (@PBX) correct?
|yes
|----
|Device supports STUN protocol
|no
|----
|Device sends NAT - keepalive messages
|yes
|----
|Device usable in [[Howto:Hosting | hosting]] scenarios?
|yes
|----
|Device refreshes the PBX registration
|yes
|----
|Device supports SIP over TCP
|yes
|----
|Device supports SRTP
|no
|----
|Device supports SIPS (SIP over TLS)
|no
|----
|Device supports HTTPS
|yes
|----
|Device supports VAD (Voice activity detection)
|no
|----
|Device supports Auto-Answer (needed when used with CTI client)
|yes
|----
|Supported menu languages
|yes
|}

==Test Results==

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|call using g711a
|yes
|----
|call using g711u
|yes
|----
|call using g729
|yes
|----
|call using g722
|yes
|----
|Overlapped sending
|no
|----
|Device sets up an early media channel for incoming calls
|no
|----
|Device sets up an early media channel for outgoing calls
|no
|----
|Device shows called id number
|no
|----
|Device shows called id name
|no
|----
|Device shows called id display info
|no
|----
|Fax using T.38
|no
|----
|CGPN can be suppressed
|no
|----
|Reverse Media Negotiation
|yes
|----
|Device shows CDPN/CGPN on incoming call
|yes
|----
|Device shows CDPN/CGPN on outgoing call
|yes
|----
|Device shows connected number
|no
|----
|Device shows diverting number
|no
|----
|Device supports distinctive ringing
|yes
|----
|Device supports asymetric codec negotiation
|no
|----
|Device supports codec renegotiation during a conversation
|yes
|----
|Device shows correct display message in case of busy CDPN
|no
|----
|Device shows correct display message in case of not existing CDPN
|no
|----
|Device shows correct display message in case that the call is declined
|no
|----
|3party conference possible
|no
|----
|Device supports display updates during call(needed for Directory Search object)
|no
|----
|Long Time Call (>30 min) works?
|yes
|----
|Registration redirecting works?
|no
|----
|Incoming SRTP call - SRTP not enabled on DUT
|no
|----
|Incoming SRTP call - SRTP enabled on DUT
|no
|----
|Voice Quality OK?
|yes
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|DTMF tones sent correctly
|yes
|----
|DTMF tones received correctly
|yes
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|Device handles incoming hold correctly
|yes
|----
|Device can put a call on hold using correctly(inactive or sendonly)
|no
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|N/A
|----
||inno1 calls inno2. inno1 transfers to testphone.
|N/A
|N/A
|----
|inno1 calls testphone. inno1 transfers to inno2.
|N/A
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|}

=== Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|testphone makes call to a Broadcast Group. inno1 picks up.
|yes
|----
|inno1 makes call to a Broadcast Group. testphone picks up.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
|yes
|----
|inno1 makes call to a Waiting Queue. testphone picks up.
|yes
|}

=== DTMF Features ===

{| border="1"
!Tested feature
!Result
|----
|CFU Activate/Deactivate
|no
|----
|CFB Activate/Deactivate
|no
|----
|CFNR Activate/Deactivate
|no
|----
|Pickup Group
|no
|----
|Pickup Directed
|no
|----
|Park/Unpark
|no
|----
|Park To/Unpark From
|no
|----
|Call Completion Busy
|no
|----
|Call Completion Cancel
|no
|----
|Join Group/Leave Group
|no
|----
|Join All Groups/Leave All Groups
|no
|----
|Enable mobility/Disable mobility
|no
|----
|Enable mobility cw/Disable mobility cw
|no
|----
|Set presence
|no
|}

==Other Features==

===Directory===

{| border="1"
!Tested feature
!Result
|----
|Device built-in directory
|yes
|----
|Exists
|yes
|----
|Can be dialled from
|yes
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|yes
|}

{| border="1"
!Tested feature
!Result
|----
|External LDAP Server supported
|no
|----
|Can be dialled from
|no
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|no
|}

===Keys===

{| border="1"
!Tested feature
!Result
|----
|Device has speed dial keys
|yes
|----
|Device has programmable function keys
|yes
|----
|Device has partner keys
|yes
|}

===CTI Features (with SOAP / TAPI / myPBX) ===

{| border="1"
!Tested feature
!Result
|----
|User Call - outgoing call
|no
|----
|User Connect - Answer incoming call
|no
|----
|User Reject - Reject alerting call
|no
|----
|User Disconnect - Disconnect active call
|no
|----
|User Hold - Put connected call on hold
|no
|----
|User Hold Retrieve - Retrieve call on hold
|no
|----
|User Transfer - Transfer with Consult
|no
|----
|User Transfer - Transfer with Consult (Alerting only)
|no
|----
|User Transfer - Blind Transfer
|no
|----
|3PTY - Make 3rd Party Call
|no
|----
|Connected Number Update on Display
|no
|}

===UC Features===

{| border="1"
!Tested feature
!Result
|----
|Video calls possible?
|yes
|----
|Video conference possible? (max. amount of participants)
|no
|----
|Video Codecs
|yes
|----
|enable/disable video during call
|yes
|----
|Set own presence possible?
|no
|----
|See presence of others possible?
|no
|----
|chat with mypbx client possible?
|no
|----
|chat with same vendor client possible?
|no
|----
|send IM - messages to phones possible?
|no
|}

== Configuration ==

=== innovaphone configuration ===

The innovaphone Virtual Appliance user interface can be opened on any computer connected with the innovaphone Virtual Appliance. Start a web browser on your computer. Enter innovaphone Virtual Appliance in the address line of the browser. The innovaphone Virtual Appliance user interface opens and enter the password. In settings innovaphone Virtual Appliance go to: PBX > Objects and choose new (User).

Enter the Description, Long Name, Display Name, Name, Number, Password. Check Node, PBX and click Apply, OK.

=== doorphone configuration ===

To register the doorphone at the innovaphone PBX you must first configure the SIP-Settings.

[[Image:2N Helios IP - 2N - SIP Testreport 3.PNG]]

In order to be able to send and receive DTMF tones on the doorphone, please configure the audio codecs like described in the screenshot below.

[[Image:2N Helios IP - 2N - SIP Testreport 2.PNG]]

[[Category:Compat|{{PAGENAME}}]]

User talk:2ntestteam

2017-02-06T12:16:42Z

2ntestteam:

Certification:
* 01/2017 - done

User talk:2ntestteam

2017-02-06T12:16:09Z

2ntestteam: /* Certification Status */

User talk:2ntestteam

2017-02-06T12:16:03Z

2ntestteam: /* Configuration */

User talk:2ntestteam

2017-02-06T12:15:58Z

2ntestteam: /* Other Features */

User talk:2ntestteam

2017-02-06T12:15:52Z

2ntestteam: /* Test Results */

User talk:2ntestteam

2017-02-06T12:15:44Z

2ntestteam: /* Device Setup */

==Certification Status==

{{Template:Compat Status "tested"}}





Testing of this product has been finalized January 16th, 2017.

==Test Results==

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|call using g711a
|yes
|----
|call using g711u
|yes
|----
|call using g729
|yes
|----
|call using g722
|yes
|----
|Overlapped sending
|no
|----
|Device sets up an early media channel for incoming calls
|no
|----
|Device sets up an early media channel for outgoing calls
|no
|----
|Device shows called id number
|no
|----
|Device shows called id name
|no
|----
|Device shows called id display info
|no
|----
|Fax using T.38
|no
|----
|CGPN can be suppressed
|no
|----
|Reverse Media Negotiation
|yes
|----
|Device shows CDPN/CGPN on incoming call
|yes
|----
|Device shows CDPN/CGPN on outgoing call
|yes
|----
|Device shows connected number
|no
|----
|Device shows diverting number
|no
|----
|Device supports distinctive ringing
|yes
|----
|Device supports asymetric codec negotiation
|no
|----
|Device supports codec renegotiation during a conversation
|yes
|----
|Device shows correct display message in case of busy CDPN
|no
|----
|Device shows correct display message in case of not existing CDPN
|no
|----
|Device shows correct display message in case that the call is declined
|no
|----
|3party conference possible
|no
|----
|Device supports display updates during call(needed for Directory Search object)
|no
|----
|Long Time Call (>30 min) works?
|yes
|----
|Registration redirecting works?
|no
|----
|Incoming SRTP call - SRTP not enabled on DUT
|no
|----
|Incoming SRTP call - SRTP enabled on DUT
|no
|----
|Voice Quality OK?
|yes
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|DTMF tones sent correctly
|yes
|----
|DTMF tones received correctly
|yes
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|Device handles incoming hold correctly
|yes
|----
|Device can put a call on hold using correctly(inactive or sendonly)
|no
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|N/A
|----
||inno1 calls inno2. inno1 transfers to testphone.
|N/A
|N/A
|----
|inno1 calls testphone. inno1 transfers to inno2.
|N/A
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|}

=== Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|testphone makes call to a Broadcast Group. inno1 picks up.
|yes
|----
|inno1 makes call to a Broadcast Group. testphone picks up.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
|yes
|----
|inno1 makes call to a Waiting Queue. testphone picks up.
|yes
|}

=== DTMF Features ===

{| border="1"
!Tested feature
!Result
|----
|CFU Activate/Deactivate
|no
|----
|CFB Activate/Deactivate
|no
|----
|CFNR Activate/Deactivate
|no
|----
|Pickup Group
|no
|----
|Pickup Directed
|no
|----
|Park/Unpark
|no
|----
|Park To/Unpark From
|no
|----
|Call Completion Busy
|no
|----
|Call Completion Cancel
|no
|----
|Join Group/Leave Group
|no
|----
|Join All Groups/Leave All Groups
|no
|----
|Enable mobility/Disable mobility
|no
|----
|Enable mobility cw/Disable mobility cw
|no
|----
|Set presence
|no
|}

==Other Features==

===Directory===

{| border="1"
!Tested feature
!Result
|----
|Device built-in directory
|yes
|----
|Exists
|yes
|----
|Can be dialled from
|yes
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|yes
|}

{| border="1"
!Tested feature
!Result
|----
|External LDAP Server supported
|no
|----
|Can be dialled from
|no
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|no
|}

===Keys===

{| border="1"
!Tested feature
!Result
|----
|Device has speed dial keys
|yes
|----
|Device has programmable function keys
|yes
|----
|Device has partner keys
|yes
|}

===CTI Features (with SOAP / TAPI / myPBX) ===

{| border="1"
!Tested feature
!Result
|----
|User Call - outgoing call
|no
|----
|User Connect - Answer incoming call
|no
|----
|User Reject - Reject alerting call
|no
|----
|User Disconnect - Disconnect active call
|no
|----
|User Hold - Put connected call on hold
|no
|----
|User Hold Retrieve - Retrieve call on hold
|no
|----
|User Transfer - Transfer with Consult
|no
|----
|User Transfer - Transfer with Consult (Alerting only)
|no
|----
|User Transfer - Blind Transfer
|no
|----
|3PTY - Make 3rd Party Call
|no
|----
|Connected Number Update on Display
|no
|}

===UC Features===

{| border="1"
!Tested feature
!Result
|----
|Video calls possible?
|yes
|----
|Video conference possible? (max. amount of participants)
|no
|----
|Video Codecs
|yes
|----
|enable/disable video during call
|yes
|----
|Set own presence possible?
|no
|----
|See presence of others possible?
|no
|----
|chat with mypbx client possible?
|no
|----
|chat with same vendor client possible?
|no
|----
|send IM - messages to phones possible?
|no
|}

== Configuration ==

=== 3rd party product configuration ===

User talk:2ntestteam

2017-02-06T12:15:37Z

2ntestteam: /* Version */

==Certification Status==

{{Template:Compat Status "tested"}}





Testing of this product has been finalized January 16th, 2017.

==Device Setup==

{| border="1"
!Tested feature
!Result
|----
|Register Device w/o specific configuration (requires DHCP)
|no
|----
|DHCP is default
|yes
|----
|DHCP yields timeserver and time displays correctly
|no
|----
|SNTP config has TZ string for timezone/dst autoconfig
|no
|----
|DHCP yields correct default gateway
|yes
|----
|Device supports magic registration (e.g. by serial)
|no
|----
|Fixed registrations works
|yes
|----
|Device registers w/o Extension (just by name)
|no
|----
|Device registers by name with non-latin1 characters (e.g. UserÄÖÜ)
|no
|----
|Device registers by extension
|yes
|----
|Device registers with password
|yes
|----
|Device registers multiple identities
|yes
|----
|2nd GK is supported (mit SIP??)
|no
|----
|Changing registrations between GK1 and GK2 (mit SIP??)
|no
|----
|PBX redirect (UserObject on Master/Phone at Slave registered)
|yes
|----
|Physical Location (@PBX) correct?
|yes
|----
|Device supports STUN protocol
|no
|----
|Device sends NAT - keepalive messages
|yes
|----
|Device usable in [[Howto:Hosting | hosting]] scenarios?
|yes
|----
|Device refreshes the PBX registration
|yes
|----
|Device supports SIP over TCP
|yes
|----
|Device supports SRTP
|no
|----
|Device supports SIPS (SIP over TLS)
|no
|----
|Device supports HTTPS
|yes
|----
|Device supports VAD (Voice activity detection)
|no
|----
|Device supports Auto-Answer (needed when used with CTI client)
|yes
|----
|Supported menu languages
|yes
|}

==Test Results==

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|call using g711a
|yes
|----
|call using g711u
|yes
|----
|call using g729
|yes
|----
|call using g722
|yes
|----
|Overlapped sending
|no
|----
|Device sets up an early media channel for incoming calls
|no
|----
|Device sets up an early media channel for outgoing calls
|no
|----
|Device shows called id number
|no
|----
|Device shows called id name
|no
|----
|Device shows called id display info
|no
|----
|Fax using T.38
|no
|----
|CGPN can be suppressed
|no
|----
|Reverse Media Negotiation
|yes
|----
|Device shows CDPN/CGPN on incoming call
|yes
|----
|Device shows CDPN/CGPN on outgoing call
|yes
|----
|Device shows connected number
|no
|----
|Device shows diverting number
|no
|----
|Device supports distinctive ringing
|yes
|----
|Device supports asymetric codec negotiation
|no
|----
|Device supports codec renegotiation during a conversation
|yes
|----
|Device shows correct display message in case of busy CDPN
|no
|----
|Device shows correct display message in case of not existing CDPN
|no
|----
|Device shows correct display message in case that the call is declined
|no
|----
|3party conference possible
|no
|----
|Device supports display updates during call(needed for Directory Search object)
|no
|----
|Long Time Call (>30 min) works?
|yes
|----
|Registration redirecting works?
|no
|----
|Incoming SRTP call - SRTP not enabled on DUT
|no
|----
|Incoming SRTP call - SRTP enabled on DUT
|no
|----
|Voice Quality OK?
|yes
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|DTMF tones sent correctly
|yes
|----
|DTMF tones received correctly
|yes
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|Device handles incoming hold correctly
|yes
|----
|Device can put a call on hold using correctly(inactive or sendonly)
|no
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|N/A
|----
||inno1 calls inno2. inno1 transfers to testphone.
|N/A
|N/A
|----
|inno1 calls testphone. inno1 transfers to inno2.
|N/A
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|}

=== Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|testphone makes call to a Broadcast Group. inno1 picks up.
|yes
|----
|inno1 makes call to a Broadcast Group. testphone picks up.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
|yes
|----
|inno1 makes call to a Waiting Queue. testphone picks up.
|yes
|}

=== DTMF Features ===

{| border="1"
!Tested feature
!Result
|----
|CFU Activate/Deactivate
|no
|----
|CFB Activate/Deactivate
|no
|----
|CFNR Activate/Deactivate
|no
|----
|Pickup Group
|no
|----
|Pickup Directed
|no
|----
|Park/Unpark
|no
|----
|Park To/Unpark From
|no
|----
|Call Completion Busy
|no
|----
|Call Completion Cancel
|no
|----
|Join Group/Leave Group
|no
|----
|Join All Groups/Leave All Groups
|no
|----
|Enable mobility/Disable mobility
|no
|----
|Enable mobility cw/Disable mobility cw
|no
|----
|Set presence
|no
|}

==Other Features==

===Directory===

{| border="1"
!Tested feature
!Result
|----
|Device built-in directory
|yes
|----
|Exists
|yes
|----
|Can be dialled from
|yes
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|yes
|}

{| border="1"
!Tested feature
!Result
|----
|External LDAP Server supported
|no
|----
|Can be dialled from
|no
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|no
|}

===Keys===

{| border="1"
!Tested feature
!Result
|----
|Device has speed dial keys
|yes
|----
|Device has programmable function keys
|yes
|----
|Device has partner keys
|yes
|}

===CTI Features (with SOAP / TAPI / myPBX) ===

{| border="1"
!Tested feature
!Result
|----
|User Call - outgoing call
|no
|----
|User Connect - Answer incoming call
|no
|----
|User Reject - Reject alerting call
|no
|----
|User Disconnect - Disconnect active call
|no
|----
|User Hold - Put connected call on hold
|no
|----
|User Hold Retrieve - Retrieve call on hold
|no
|----
|User Transfer - Transfer with Consult
|no
|----
|User Transfer - Transfer with Consult (Alerting only)
|no
|----
|User Transfer - Blind Transfer
|no
|----
|3PTY - Make 3rd Party Call
|no
|----
|Connected Number Update on Display
|no
|}

===UC Features===

{| border="1"
!Tested feature
!Result
|----
|Video calls possible?
|yes
|----
|Video conference possible? (max. amount of participants)
|no
|----
|Video Codecs
|yes
|----
|enable/disable video during call
|yes
|----
|Set own presence possible?
|no
|----
|See presence of others possible?
|no
|----
|chat with mypbx client possible?
|no
|----
|chat with same vendor client possible?
|no
|----
|send IM - messages to phones possible?
|no
|}

== Configuration ==

=== 3rd party product configuration ===

User talk:2ntestteam

2017-02-06T12:15:33Z

2ntestteam: /* Summary */

==Certification Status==

{{Template:Compat Status "tested"}}





Testing of this product has been finalized January 16th, 2017.

==Version==
Firmware Version:
2.18.0.27.5

Hardware Version:
570v5

innovaphone Firmware:
11r2 sr22 IPVA[11.3648]

==Device Setup==

{| border="1"
!Tested feature
!Result
|----
|Register Device w/o specific configuration (requires DHCP)
|no
|----
|DHCP is default
|yes
|----
|DHCP yields timeserver and time displays correctly
|no
|----
|SNTP config has TZ string for timezone/dst autoconfig
|no
|----
|DHCP yields correct default gateway
|yes
|----
|Device supports magic registration (e.g. by serial)
|no
|----
|Fixed registrations works
|yes
|----
|Device registers w/o Extension (just by name)
|no
|----
|Device registers by name with non-latin1 characters (e.g. UserÄÖÜ)
|no
|----
|Device registers by extension
|yes
|----
|Device registers with password
|yes
|----
|Device registers multiple identities
|yes
|----
|2nd GK is supported (mit SIP??)
|no
|----
|Changing registrations between GK1 and GK2 (mit SIP??)
|no
|----
|PBX redirect (UserObject on Master/Phone at Slave registered)
|yes
|----
|Physical Location (@PBX) correct?
|yes
|----
|Device supports STUN protocol
|no
|----
|Device sends NAT - keepalive messages
|yes
|----
|Device usable in [[Howto:Hosting | hosting]] scenarios?
|yes
|----
|Device refreshes the PBX registration
|yes
|----
|Device supports SIP over TCP
|yes
|----
|Device supports SRTP
|no
|----
|Device supports SIPS (SIP over TLS)
|no
|----
|Device supports HTTPS
|yes
|----
|Device supports VAD (Voice activity detection)
|no
|----
|Device supports Auto-Answer (needed when used with CTI client)
|yes
|----
|Supported menu languages
|yes
|}

==Test Results==

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|call using g711a
|yes
|----
|call using g711u
|yes
|----
|call using g729
|yes
|----
|call using g722
|yes
|----
|Overlapped sending
|no
|----
|Device sets up an early media channel for incoming calls
|no
|----
|Device sets up an early media channel for outgoing calls
|no
|----
|Device shows called id number
|no
|----
|Device shows called id name
|no
|----
|Device shows called id display info
|no
|----
|Fax using T.38
|no
|----
|CGPN can be suppressed
|no
|----
|Reverse Media Negotiation
|yes
|----
|Device shows CDPN/CGPN on incoming call
|yes
|----
|Device shows CDPN/CGPN on outgoing call
|yes
|----
|Device shows connected number
|no
|----
|Device shows diverting number
|no
|----
|Device supports distinctive ringing
|yes
|----
|Device supports asymetric codec negotiation
|no
|----
|Device supports codec renegotiation during a conversation
|yes
|----
|Device shows correct display message in case of busy CDPN
|no
|----
|Device shows correct display message in case of not existing CDPN
|no
|----
|Device shows correct display message in case that the call is declined
|no
|----
|3party conference possible
|no
|----
|Device supports display updates during call(needed for Directory Search object)
|no
|----
|Long Time Call (>30 min) works?
|yes
|----
|Registration redirecting works?
|no
|----
|Incoming SRTP call - SRTP not enabled on DUT
|no
|----
|Incoming SRTP call - SRTP enabled on DUT
|no
|----
|Voice Quality OK?
|yes
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|DTMF tones sent correctly
|yes
|----
|DTMF tones received correctly
|yes
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|Device handles incoming hold correctly
|yes
|----
|Device can put a call on hold using correctly(inactive or sendonly)
|no
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|N/A
|----
||inno1 calls inno2. inno1 transfers to testphone.
|N/A
|N/A
|----
|inno1 calls testphone. inno1 transfers to inno2.
|N/A
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|}

=== Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|testphone makes call to a Broadcast Group. inno1 picks up.
|yes
|----
|inno1 makes call to a Broadcast Group. testphone picks up.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
|yes
|----
|inno1 makes call to a Waiting Queue. testphone picks up.
|yes
|}

=== DTMF Features ===

{| border="1"
!Tested feature
!Result
|----
|CFU Activate/Deactivate
|no
|----
|CFB Activate/Deactivate
|no
|----
|CFNR Activate/Deactivate
|no
|----
|Pickup Group
|no
|----
|Pickup Directed
|no
|----
|Park/Unpark
|no
|----
|Park To/Unpark From
|no
|----
|Call Completion Busy
|no
|----
|Call Completion Cancel
|no
|----
|Join Group/Leave Group
|no
|----
|Join All Groups/Leave All Groups
|no
|----
|Enable mobility/Disable mobility
|no
|----
|Enable mobility cw/Disable mobility cw
|no
|----
|Set presence
|no
|}

==Other Features==

===Directory===

{| border="1"
!Tested feature
!Result
|----
|Device built-in directory
|yes
|----
|Exists
|yes
|----
|Can be dialled from
|yes
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|yes
|}

{| border="1"
!Tested feature
!Result
|----
|External LDAP Server supported
|no
|----
|Can be dialled from
|no
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|no
|}

===Keys===

{| border="1"
!Tested feature
!Result
|----
|Device has speed dial keys
|yes
|----
|Device has programmable function keys
|yes
|----
|Device has partner keys
|yes
|}

===CTI Features (with SOAP / TAPI / myPBX) ===

{| border="1"
!Tested feature
!Result
|----
|User Call - outgoing call
|no
|----
|User Connect - Answer incoming call
|no
|----
|User Reject - Reject alerting call
|no
|----
|User Disconnect - Disconnect active call
|no
|----
|User Hold - Put connected call on hold
|no
|----
|User Hold Retrieve - Retrieve call on hold
|no
|----
|User Transfer - Transfer with Consult
|no
|----
|User Transfer - Transfer with Consult (Alerting only)
|no
|----
|User Transfer - Blind Transfer
|no
|----
|3PTY - Make 3rd Party Call
|no
|----
|Connected Number Update on Display
|no
|}

===UC Features===

{| border="1"
!Tested feature
!Result
|----
|Video calls possible?
|yes
|----
|Video conference possible? (max. amount of participants)
|no
|----
|Video Codecs
|yes
|----
|enable/disable video during call
|yes
|----
|Set own presence possible?
|no
|----
|See presence of others possible?
|no
|----
|chat with mypbx client possible?
|no
|----
|chat with same vendor client possible?
|no
|----
|send IM - messages to phones possible?
|no
|}

== Configuration ==

=== 3rd party product configuration ===

User talk:2ntestteam

2017-02-06T12:15:27Z

2ntestteam: /* innovaphone configuration */

==Summary==
The Helios IP - doorphone supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F|recommended product]].

The video functionality of the doorphone was also tested. With the current V6 SR2 firmware only basic video calls are possible. For more information on this topic and other minor problems, please refer to: [[Howto:2N_Helios_IP_-_2N_-_SIP_Testreport#Known_Problems|Known Problems]]

The 2N support team was very fast and made an overall good impression.

The Helios IP - doorphone was retested by its manufacturer 2N in November 2010 using actualized firmware and hardware. The test were completed successfully, no problems were found. For a detailed view of this report, please have a look at [[Howto:2N_Helios_IP_-_2N_-_vendor_Testreport]]

==Certification Status==

{{Template:Compat Status "tested"}}





Testing of this product has been finalized January 16th, 2017.

==Version==
Firmware Version:
2.18.0.27.5

Hardware Version:
570v5

innovaphone Firmware:
11r2 sr22 IPVA[11.3648]

==Device Setup==

{| border="1"
!Tested feature
!Result
|----
|Register Device w/o specific configuration (requires DHCP)
|no
|----
|DHCP is default
|yes
|----
|DHCP yields timeserver and time displays correctly
|no
|----
|SNTP config has TZ string for timezone/dst autoconfig
|no
|----
|DHCP yields correct default gateway
|yes
|----
|Device supports magic registration (e.g. by serial)
|no
|----
|Fixed registrations works
|yes
|----
|Device registers w/o Extension (just by name)
|no
|----
|Device registers by name with non-latin1 characters (e.g. UserÄÖÜ)
|no
|----
|Device registers by extension
|yes
|----
|Device registers with password
|yes
|----
|Device registers multiple identities
|yes
|----
|2nd GK is supported (mit SIP??)
|no
|----
|Changing registrations between GK1 and GK2 (mit SIP??)
|no
|----
|PBX redirect (UserObject on Master/Phone at Slave registered)
|yes
|----
|Physical Location (@PBX) correct?
|yes
|----
|Device supports STUN protocol
|no
|----
|Device sends NAT - keepalive messages
|yes
|----
|Device usable in [[Howto:Hosting | hosting]] scenarios?
|yes
|----
|Device refreshes the PBX registration
|yes
|----
|Device supports SIP over TCP
|yes
|----
|Device supports SRTP
|no
|----
|Device supports SIPS (SIP over TLS)
|no
|----
|Device supports HTTPS
|yes
|----
|Device supports VAD (Voice activity detection)
|no
|----
|Device supports Auto-Answer (needed when used with CTI client)
|yes
|----
|Supported menu languages
|yes
|}

==Test Results==

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|call using g711a
|yes
|----
|call using g711u
|yes
|----
|call using g729
|yes
|----
|call using g722
|yes
|----
|Overlapped sending
|no
|----
|Device sets up an early media channel for incoming calls
|no
|----
|Device sets up an early media channel for outgoing calls
|no
|----
|Device shows called id number
|no
|----
|Device shows called id name
|no
|----
|Device shows called id display info
|no
|----
|Fax using T.38
|no
|----
|CGPN can be suppressed
|no
|----
|Reverse Media Negotiation
|yes
|----
|Device shows CDPN/CGPN on incoming call
|yes
|----
|Device shows CDPN/CGPN on outgoing call
|yes
|----
|Device shows connected number
|no
|----
|Device shows diverting number
|no
|----
|Device supports distinctive ringing
|yes
|----
|Device supports asymetric codec negotiation
|no
|----
|Device supports codec renegotiation during a conversation
|yes
|----
|Device shows correct display message in case of busy CDPN
|no
|----
|Device shows correct display message in case of not existing CDPN
|no
|----
|Device shows correct display message in case that the call is declined
|no
|----
|3party conference possible
|no
|----
|Device supports display updates during call(needed for Directory Search object)
|no
|----
|Long Time Call (>30 min) works?
|yes
|----
|Registration redirecting works?
|no
|----
|Incoming SRTP call - SRTP not enabled on DUT
|no
|----
|Incoming SRTP call - SRTP enabled on DUT
|no
|----
|Voice Quality OK?
|yes
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|DTMF tones sent correctly
|yes
|----
|DTMF tones received correctly
|yes
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|Device handles incoming hold correctly
|yes
|----
|Device can put a call on hold using correctly(inactive or sendonly)
|no
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|N/A
|----
||inno1 calls inno2. inno1 transfers to testphone.
|N/A
|N/A
|----
|inno1 calls testphone. inno1 transfers to inno2.
|N/A
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|}

=== Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|testphone makes call to a Broadcast Group. inno1 picks up.
|yes
|----
|inno1 makes call to a Broadcast Group. testphone picks up.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
|yes
|----
|inno1 makes call to a Waiting Queue. testphone picks up.
|yes
|}

=== DTMF Features ===

{| border="1"
!Tested feature
!Result
|----
|CFU Activate/Deactivate
|no
|----
|CFB Activate/Deactivate
|no
|----
|CFNR Activate/Deactivate
|no
|----
|Pickup Group
|no
|----
|Pickup Directed
|no
|----
|Park/Unpark
|no
|----
|Park To/Unpark From
|no
|----
|Call Completion Busy
|no
|----
|Call Completion Cancel
|no
|----
|Join Group/Leave Group
|no
|----
|Join All Groups/Leave All Groups
|no
|----
|Enable mobility/Disable mobility
|no
|----
|Enable mobility cw/Disable mobility cw
|no
|----
|Set presence
|no
|}

==Other Features==

===Directory===

{| border="1"
!Tested feature
!Result
|----
|Device built-in directory
|yes
|----
|Exists
|yes
|----
|Can be dialled from
|yes
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|yes
|}

{| border="1"
!Tested feature
!Result
|----
|External LDAP Server supported
|no
|----
|Can be dialled from
|no
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|no
|}

===Keys===

{| border="1"
!Tested feature
!Result
|----
|Device has speed dial keys
|yes
|----
|Device has programmable function keys
|yes
|----
|Device has partner keys
|yes
|}

===CTI Features (with SOAP / TAPI / myPBX) ===

{| border="1"
!Tested feature
!Result
|----
|User Call - outgoing call
|no
|----
|User Connect - Answer incoming call
|no
|----
|User Reject - Reject alerting call
|no
|----
|User Disconnect - Disconnect active call
|no
|----
|User Hold - Put connected call on hold
|no
|----
|User Hold Retrieve - Retrieve call on hold
|no
|----
|User Transfer - Transfer with Consult
|no
|----
|User Transfer - Transfer with Consult (Alerting only)
|no
|----
|User Transfer - Blind Transfer
|no
|----
|3PTY - Make 3rd Party Call
|no
|----
|Connected Number Update on Display
|no
|}

===UC Features===

{| border="1"
!Tested feature
!Result
|----
|Video calls possible?
|yes
|----
|Video conference possible? (max. amount of participants)
|no
|----
|Video Codecs
|yes
|----
|enable/disable video during call
|yes
|----
|Set own presence possible?
|no
|----
|See presence of others possible?
|no
|----
|chat with mypbx client possible?
|no
|----
|chat with same vendor client possible?
|no
|----
|send IM - messages to phones possible?
|no
|}

== Configuration ==

=== 3rd party product configuration ===

Howto11r2:2N Helios IP - 2N - SIP Testreport 2017

2017-02-06T12:13:10Z

2ntestteam: /* Other Features */

==Summary==
The Helios IP - doorphone supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F|recommended product]].

==Certification Status==

{{Template:Compat Status "tested"}}





Testing of this product has been finalized January 16th, 2017.

==Version==
Firmware Version:
2.18.0.27.5

Hardware Version:
570v5

innovaphone Firmware:
11r2 sr22 IPVA[11.3648]

==Device Setup==

{| border="1"
!Tested feature
!Result
|----
|Register Device w/o specific configuration (requires DHCP)
|no
|----
|DHCP is default
|yes
|----
|DHCP yields timeserver and time displays correctly
|no
|----
|SNTP config has TZ string for timezone/dst autoconfig
|no
|----
|DHCP yields correct default gateway
|yes
|----
|Device supports magic registration (e.g. by serial)
|no
|----
|Fixed registrations works
|yes
|----
|Device registers w/o Extension (just by name)
|no
|----
|Device registers by name with non-latin1 characters (e.g. UserÄÖÜ)
|no
|----
|Device registers by extension
|yes
|----
|Device registers with password
|yes
|----
|Device registers multiple identities
|yes
|----
|2nd GK is supported (mit SIP??)
|no
|----
|Changing registrations between GK1 and GK2 (mit SIP??)
|no
|----
|PBX redirect (UserObject on Master/Phone at Slave registered)
|yes
|----
|Physical Location (@PBX) correct?
|yes
|----
|Device supports STUN protocol
|no
|----
|Device sends NAT - keepalive messages
|yes
|----
|Device usable in [[Howto:Hosting | hosting]] scenarios?
|yes
|----
|Device refreshes the PBX registration
|yes
|----
|Device supports SIP over TCP
|yes
|----
|Device supports SRTP
|no
|----
|Device supports SIPS (SIP over TLS)
|no
|----
|Device supports HTTPS
|yes
|----
|Device supports VAD (Voice activity detection)
|no
|----
|Device supports Auto-Answer (needed when used with CTI client)
|yes
|----
|Supported menu languages
|yes
|}

==Test Results==

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|call using g711a
|yes
|----
|call using g711u
|yes
|----
|call using g729
|yes
|----
|call using g722
|yes
|----
|Overlapped sending
|no
|----
|Device sets up an early media channel for incoming calls
|no
|----
|Device sets up an early media channel for outgoing calls
|no
|----
|Device shows called id number
|no
|----
|Device shows called id name
|no
|----
|Device shows called id display info
|no
|----
|Fax using T.38
|no
|----
|CGPN can be suppressed
|no
|----
|Reverse Media Negotiation
|yes
|----
|Device shows CDPN/CGPN on incoming call
|yes
|----
|Device shows CDPN/CGPN on outgoing call
|yes
|----
|Device shows connected number
|no
|----
|Device shows diverting number
|no
|----
|Device supports distinctive ringing
|yes
|----
|Device supports asymetric codec negotiation
|no
|----
|Device supports codec renegotiation during a conversation
|yes
|----
|Device shows correct display message in case of busy CDPN
|no
|----
|Device shows correct display message in case of not existing CDPN
|no
|----
|Device shows correct display message in case that the call is declined
|no
|----
|3party conference possible
|no
|----
|Device supports display updates during call(needed for Directory Search object)
|no
|----
|Long Time Call (>30 min) works?
|yes
|----
|Registration redirecting works?
|no
|----
|Incoming SRTP call - SRTP not enabled on DUT
|no
|----
|Incoming SRTP call - SRTP enabled on DUT
|no
|----
|Voice Quality OK?
|yes
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|DTMF tones sent correctly
|yes
|----
|DTMF tones received correctly
|yes
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|Device handles incoming hold correctly
|yes
|----
|Device can put a call on hold using correctly(inactive or sendonly)
|no
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|N/A
|----
||inno1 calls inno2. inno1 transfers to testphone.
|N/A
|N/A
|----
|inno1 calls testphone. inno1 transfers to inno2.
|N/A
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|}

=== Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|testphone makes call to a Broadcast Group. inno1 picks up.
|yes
|----
|inno1 makes call to a Broadcast Group. testphone picks up.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
|yes
|----
|inno1 makes call to a Waiting Queue. testphone picks up.
|yes
|}

=== DTMF Features ===

{| border="1"
!Tested feature
!Result
|----
|CFU Activate/Deactivate
|no
|----
|CFB Activate/Deactivate
|no
|----
|CFNR Activate/Deactivate
|no
|----
|Pickup Group
|no
|----
|Pickup Directed
|no
|----
|Park/Unpark
|no
|----
|Park To/Unpark From
|no
|----
|Call Completion Busy
|no
|----
|Call Completion Cancel
|no
|----
|Join Group/Leave Group
|no
|----
|Join All Groups/Leave All Groups
|no
|----
|Enable mobility/Disable mobility
|no
|----
|Enable mobility cw/Disable mobility cw
|no
|----
|Set presence
|no
|}

==Other Features==

===Directory===

{| border="1"
!Tested feature
!Result
|----
|Device built-in directory
|yes
|----
|Exists
|yes
|----
|Can be dialled from
|yes
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|yes
|}

{| border="1"
!Tested feature
!Result
|----
|External LDAP Server supported
|no
|----
|Can be dialled from
|no
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|no
|}

===Keys===

{| border="1"
!Tested feature
!Result
|----
|Device has speed dial keys
|yes
|----
|Device has programmable function keys
|yes
|----
|Device has partner keys
|yes
|}

===CTI Features (with SOAP / TAPI / myPBX) ===

{| border="1"
!Tested feature
!Result
|----
|User Call - outgoing call
|no
|----
|User Connect - Answer incoming call
|no
|----
|User Reject - Reject alerting call
|no
|----
|User Disconnect - Disconnect active call
|no
|----
|User Hold - Put connected call on hold
|no
|----
|User Hold Retrieve - Retrieve call on hold
|no
|----
|User Transfer - Transfer with Consult
|no
|----
|User Transfer - Transfer with Consult (Alerting only)
|no
|----
|User Transfer - Blind Transfer
|no
|----
|3PTY - Make 3rd Party Call
|no
|----
|Connected Number Update on Display
|no
|}

===UC Features===

{| border="1"
!Tested feature
!Result
|----
|Video calls possible?
|yes
|----
|Video conference possible? (max. amount of participants)
|no
|----
|Video Codecs
|yes
|----
|enable/disable video during call
|yes
|----
|Set own presence possible?
|no
|----
|See presence of others possible?
|no
|----
|chat with mypbx client possible?
|no
|----
|chat with same vendor client possible?
|no
|----
|send IM - messages to phones possible?
|no
|}

== Configuration ==

=== innovaphone configuration ===

The doorphone registers at the PBX as a normal PBX user.

[[Image:2N Helios IP - 2N - SIP Testreport 1.PNG]]

=== doorphone configuration ===

To register the doorphone at the innovaphone PBX you must first configure the SIP-Settings.

[[Image:2N Helios IP - 2N - SIP Testreport 3.PNG]]

In order to be able to send and receive DTMF tones on the doorphone, please configure the audio codecs like described in the screenshot below.

[[Image:2N Helios IP - 2N - SIP Testreport 2.PNG]]

[[Category:Compat|{{PAGENAME}}]]

Howto11r2:2N Helios IP - 2N - SIP Testreport 2017

2017-02-06T12:12:02Z

2ntestteam: /* Known Problems */

==Summary==
The Helios IP - doorphone supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F|recommended product]].

==Certification Status==

{{Template:Compat Status "tested"}}





Testing of this product has been finalized January 16th, 2017.

==Version==
Firmware Version:
2.18.0.27.5

Hardware Version:
570v5

innovaphone Firmware:
11r2 sr22 IPVA[11.3648]

==Device Setup==

{| border="1"
!Tested feature
!Result
|----
|Register Device w/o specific configuration (requires DHCP)
|no
|----
|DHCP is default
|yes
|----
|DHCP yields timeserver and time displays correctly
|no
|----
|SNTP config has TZ string for timezone/dst autoconfig
|no
|----
|DHCP yields correct default gateway
|yes
|----
|Device supports magic registration (e.g. by serial)
|no
|----
|Fixed registrations works
|yes
|----
|Device registers w/o Extension (just by name)
|no
|----
|Device registers by name with non-latin1 characters (e.g. UserÄÖÜ)
|no
|----
|Device registers by extension
|yes
|----
|Device registers with password
|yes
|----
|Device registers multiple identities
|yes
|----
|2nd GK is supported (mit SIP??)
|no
|----
|Changing registrations between GK1 and GK2 (mit SIP??)
|no
|----
|PBX redirect (UserObject on Master/Phone at Slave registered)
|yes
|----
|Physical Location (@PBX) correct?
|yes
|----
|Device supports STUN protocol
|no
|----
|Device sends NAT - keepalive messages
|yes
|----
|Device usable in [[Howto:Hosting | hosting]] scenarios?
|yes
|----
|Device refreshes the PBX registration
|yes
|----
|Device supports SIP over TCP
|yes
|----
|Device supports SRTP
|no
|----
|Device supports SIPS (SIP over TLS)
|no
|----
|Device supports HTTPS
|yes
|----
|Device supports VAD (Voice activity detection)
|no
|----
|Device supports Auto-Answer (needed when used with CTI client)
|yes
|----
|Supported menu languages
|yes
|}

==Test Results==

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|call using g711a
|yes
|----
|call using g711u
|yes
|----
|call using g729
|yes
|----
|call using g722
|yes
|----
|Overlapped sending
|no
|----
|Device sets up an early media channel for incoming calls
|no
|----
|Device sets up an early media channel for outgoing calls
|no
|----
|Device shows called id number
|no
|----
|Device shows called id name
|no
|----
|Device shows called id display info
|no
|----
|Fax using T.38
|no
|----
|CGPN can be suppressed
|no
|----
|Reverse Media Negotiation
|yes
|----
|Device shows CDPN/CGPN on incoming call
|yes
|----
|Device shows CDPN/CGPN on outgoing call
|yes
|----
|Device shows connected number
|no
|----
|Device shows diverting number
|no
|----
|Device supports distinctive ringing
|yes
|----
|Device supports asymetric codec negotiation
|no
|----
|Device supports codec renegotiation during a conversation
|yes
|----
|Device shows correct display message in case of busy CDPN
|no
|----
|Device shows correct display message in case of not existing CDPN
|no
|----
|Device shows correct display message in case that the call is declined
|no
|----
|3party conference possible
|no
|----
|Device supports display updates during call(needed for Directory Search object)
|no
|----
|Long Time Call (>30 min) works?
|yes
|----
|Registration redirecting works?
|no
|----
|Incoming SRTP call - SRTP not enabled on DUT
|no
|----
|Incoming SRTP call - SRTP enabled on DUT
|no
|----
|Voice Quality OK?
|yes
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|DTMF tones sent correctly
|yes
|----
|DTMF tones received correctly
|yes
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|Device handles incoming hold correctly
|yes
|----
|Device can put a call on hold using correctly(inactive or sendonly)
|no
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|N/A
|----
||inno1 calls inno2. inno1 transfers to testphone.
|N/A
|N/A
|----
|inno1 calls testphone. inno1 transfers to inno2.
|N/A
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|}

=== Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|testphone makes call to a Broadcast Group. inno1 picks up.
|yes
|----
|inno1 makes call to a Broadcast Group. testphone picks up.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
|yes
|----
|inno1 makes call to a Waiting Queue. testphone picks up.
|yes
|}

=== DTMF Features ===

{| border="1"
!Tested feature
!Result
|----
|CFU Activate/Deactivate
|no
|----
|CFB Activate/Deactivate
|no
|----
|CFNR Activate/Deactivate
|no
|----
|Pickup Group
|no
|----
|Pickup Directed
|no
|----
|Park/Unpark
|no
|----
|Park To/Unpark From
|no
|----
|Call Completion Busy
|no
|----
|Call Completion Cancel
|no
|----
|Join Group/Leave Group
|no
|----
|Join All Groups/Leave All Groups
|no
|----
|Enable mobility/Disable mobility
|no
|----
|Enable mobility cw/Disable mobility cw
|no
|----
|Set presence
|no
|}

==Other Features==

===Directory===

{| border="1"
!Tested feature
!Result
|----
|Device built-in directory
|yes
|----
|Exists
|yes
|----
|Can be dialled from
|yes
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|yes
|}

{| border="1"
!Tested feature
!Result
|----
|External LDAP Server supported
|no
|----
|Can be dialled from
|no
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|no
|}

===Keys===

{| border="1"
!Tested feature
!Result
|----
|Device has speed dial keys
|yes
|----
|Device has programmable function keys
|yes
|----
|Device has partner keys
|yes
|}

===CTI Features (with SOAP / TAPI / myPBX) ===

{| border="1"
!Tested feature
!Result
|----
|User Call - outgoing call
|no
|----
|User Connect - Answer incoming call
|no
|----
|User Reject - Reject alerting call
|no
|----
|User Disconnect - Disconnect active call
|no
|----
|User Hold - Put connected call on hold
|no
|----
|User Hold Retrieve - Retrieve call on hold
|no
|----
|User Transfer - Transfer with Consult
|no
|----
|User Transfer - Transfer with Consult (Alerting only)
|no
|----
|User Transfer - Blind Transfer
|no
|----
|3PTY - Make 3rd Party Call
|no
|----
|Connected Number Update on Display
|no
|}

===UC Features===

{| border="1"
!Tested feature
!Result
|----
|Video calls possible?
|yes
|----
|Video conference possible? (max. amount of participants)
|no
|----
|Video Codecs
|yes
|----
|enable/disable video during call
|yes
|----
|Set own presence possible?
|no
|----
|See presence of others possible?
|no
|----
|chat with mypbx client possible?
|no
|----
|chat with same vendor client possible?
|no
|----
|send IM - messages to phones possible?
|no
|}

== Configuration ==

=== innovaphone configuration ===

The doorphone registers at the PBX as a normal PBX user.

[[Image:2N Helios IP - 2N - SIP Testreport 1.PNG]]

=== doorphone configuration ===

To register the doorphone at the innovaphone PBX you must first configure the SIP-Settings.

[[Image:2N Helios IP - 2N - SIP Testreport 3.PNG]]

In order to be able to send and receive DTMF tones on the doorphone, please configure the audio codecs like described in the screenshot below.

[[Image:2N Helios IP - 2N - SIP Testreport 2.PNG]]

[[Category:Compat|{{PAGENAME}}]]

Howto11r2:2N Helios IP - 2N - SIP Testreport 2017

2017-02-06T12:11:52Z

2ntestteam: /* Other Features */

==Summary==
The Helios IP - doorphone supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F|recommended product]].

==Certification Status==

{{Template:Compat Status "tested"}}





Testing of this product has been finalized January 16th, 2017.

==Version==
Firmware Version:
2.18.0.27.5

Hardware Version:
570v5

innovaphone Firmware:
11r2 sr22 IPVA[11.3648]

==Device Setup==

{| border="1"
!Tested feature
!Result
|----
|Register Device w/o specific configuration (requires DHCP)
|no
|----
|DHCP is default
|yes
|----
|DHCP yields timeserver and time displays correctly
|no
|----
|SNTP config has TZ string for timezone/dst autoconfig
|no
|----
|DHCP yields correct default gateway
|yes
|----
|Device supports magic registration (e.g. by serial)
|no
|----
|Fixed registrations works
|yes
|----
|Device registers w/o Extension (just by name)
|no
|----
|Device registers by name with non-latin1 characters (e.g. UserÄÖÜ)
|no
|----
|Device registers by extension
|yes
|----
|Device registers with password
|yes
|----
|Device registers multiple identities
|yes
|----
|2nd GK is supported (mit SIP??)
|no
|----
|Changing registrations between GK1 and GK2 (mit SIP??)
|no
|----
|PBX redirect (UserObject on Master/Phone at Slave registered)
|yes
|----
|Physical Location (@PBX) correct?
|yes
|----
|Device supports STUN protocol
|no
|----
|Device sends NAT - keepalive messages
|yes
|----
|Device usable in [[Howto:Hosting | hosting]] scenarios?
|yes
|----
|Device refreshes the PBX registration
|yes
|----
|Device supports SIP over TCP
|yes
|----
|Device supports SRTP
|no
|----
|Device supports SIPS (SIP over TLS)
|no
|----
|Device supports HTTPS
|yes
|----
|Device supports VAD (Voice activity detection)
|no
|----
|Device supports Auto-Answer (needed when used with CTI client)
|yes
|----
|Supported menu languages
|yes
|}

==Test Results==

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|call using g711a
|yes
|----
|call using g711u
|yes
|----
|call using g729
|yes
|----
|call using g722
|yes
|----
|Overlapped sending
|no
|----
|Device sets up an early media channel for incoming calls
|no
|----
|Device sets up an early media channel for outgoing calls
|no
|----
|Device shows called id number
|no
|----
|Device shows called id name
|no
|----
|Device shows called id display info
|no
|----
|Fax using T.38
|no
|----
|CGPN can be suppressed
|no
|----
|Reverse Media Negotiation
|yes
|----
|Device shows CDPN/CGPN on incoming call
|yes
|----
|Device shows CDPN/CGPN on outgoing call
|yes
|----
|Device shows connected number
|no
|----
|Device shows diverting number
|no
|----
|Device supports distinctive ringing
|yes
|----
|Device supports asymetric codec negotiation
|no
|----
|Device supports codec renegotiation during a conversation
|yes
|----
|Device shows correct display message in case of busy CDPN
|no
|----
|Device shows correct display message in case of not existing CDPN
|no
|----
|Device shows correct display message in case that the call is declined
|no
|----
|3party conference possible
|no
|----
|Device supports display updates during call(needed for Directory Search object)
|no
|----
|Long Time Call (>30 min) works?
|yes
|----
|Registration redirecting works?
|no
|----
|Incoming SRTP call - SRTP not enabled on DUT
|no
|----
|Incoming SRTP call - SRTP enabled on DUT
|no
|----
|Voice Quality OK?
|yes
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|DTMF tones sent correctly
|yes
|----
|DTMF tones received correctly
|yes
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|Device handles incoming hold correctly
|yes
|----
|Device can put a call on hold using correctly(inactive or sendonly)
|no
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|N/A
|----
||inno1 calls inno2. inno1 transfers to testphone.
|N/A
|N/A
|----
|inno1 calls testphone. inno1 transfers to inno2.
|N/A
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|}

=== Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|testphone makes call to a Broadcast Group. inno1 picks up.
|yes
|----
|inno1 makes call to a Broadcast Group. testphone picks up.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
|yes
|----
|inno1 makes call to a Waiting Queue. testphone picks up.
|yes
|}

=== DTMF Features ===

{| border="1"
!Tested feature
!Result
|----
|CFU Activate/Deactivate
|no
|----
|CFB Activate/Deactivate
|no
|----
|CFNR Activate/Deactivate
|no
|----
|Pickup Group
|no
|----
|Pickup Directed
|no
|----
|Park/Unpark
|no
|----
|Park To/Unpark From
|no
|----
|Call Completion Busy
|no
|----
|Call Completion Cancel
|no
|----
|Join Group/Leave Group
|no
|----
|Join All Groups/Leave All Groups
|no
|----
|Enable mobility/Disable mobility
|no
|----
|Enable mobility cw/Disable mobility cw
|no
|----
|Set presence
|no
|}

==Other Features==

===Directory===

{| border="1"
!Tested feature
!Result
|----
|Device built-in directory
|yes
|----
|Exists
|yes
|----
|Can be dialled from
|yes
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|yes
|}

{| border="1"
!Tested feature
!Result
|----
|External LDAP Server supported
|no
|----
|Can be dialled from
|no
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|no
|}

===Keys===

{| border="1"
!Tested feature
!Result
|----
|Device has speed dial keys
|yes
|----
|Device has programmable function keys
|yes
|----
|Device has partner keys
|yes
|}

===CTI Features (with SOAP / TAPI / myPBX) ===

{| border="1"
!Tested feature
!Result
|----
|User Call - outgoing call
|no
|----
|User Connect - Answer incoming call
|no
|----
|User Reject - Reject alerting call
|no
|----
|User Disconnect - Disconnect active call
|no
|----
|User Hold - Put connected call on hold
|no
|----
|User Hold Retrieve - Retrieve call on hold
|no
|----
|User Transfer - Transfer with Consult
|no
|----
|User Transfer - Transfer with Consult (Alerting only)
|no
|----
|User Transfer - Blind Transfer
|no
|----
|3PTY - Make 3rd Party Call
|no
|----
|Connected Number Update on Display
|no
|}

===UC Features===

{| border="1"
!Tested feature
!Result
|----
|Video calls possible?
|yes
|----
|Video conference possible? (max. amount of participants)
|no
|----
|Video Codecs
|yes
|----
|enable/disable video during call
|yes
|----
|Set own presence possible?
|no
|----
|See presence of others possible?
|no
|----
|chat with mypbx client possible?
|no
|----
|chat with same vendor client possible?
|no
|----
|send IM - messages to phones possible?
|no
|}

== Known Problems ==
* timezone settings can not be received via DHCP
* Cat-cable is connected via screw terminals not via LSA Plus, installation is quite complicated and should only be done by qualified personal.
* with the curent V6 SR2 firmware, video calls are supported only with basic functionality (transfer,hold and calls to waitingqueues not possible)
* as of the upcoming V7 firmware, video calls will have the same functionality as audio calls(transfer,hold and calls to waitingqueues possible)

== Configuration ==

=== innovaphone configuration ===

The doorphone registers at the PBX as a normal PBX user.

[[Image:2N Helios IP - 2N - SIP Testreport 1.PNG]]

=== doorphone configuration ===

To register the doorphone at the innovaphone PBX you must first configure the SIP-Settings.

[[Image:2N Helios IP - 2N - SIP Testreport 3.PNG]]

In order to be able to send and receive DTMF tones on the doorphone, please configure the audio codecs like described in the screenshot below.

[[Image:2N Helios IP - 2N - SIP Testreport 2.PNG]]

[[Category:Compat|{{PAGENAME}}]]

Howto11r2:2N Helios IP - 2N - SIP Testreport 2017

2017-02-06T12:11:24Z

2ntestteam: /* Test Results */

==Summary==
The Helios IP - doorphone supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F|recommended product]].

==Certification Status==

{{Template:Compat Status "tested"}}





Testing of this product has been finalized January 16th, 2017.

==Version==
Firmware Version:
2.18.0.27.5

Hardware Version:
570v5

innovaphone Firmware:
11r2 sr22 IPVA[11.3648]

==Device Setup==

{| border="1"
!Tested feature
!Result
|----
|Register Device w/o specific configuration (requires DHCP)
|no
|----
|DHCP is default
|yes
|----
|DHCP yields timeserver and time displays correctly
|no
|----
|SNTP config has TZ string for timezone/dst autoconfig
|no
|----
|DHCP yields correct default gateway
|yes
|----
|Device supports magic registration (e.g. by serial)
|no
|----
|Fixed registrations works
|yes
|----
|Device registers w/o Extension (just by name)
|no
|----
|Device registers by name with non-latin1 characters (e.g. UserÄÖÜ)
|no
|----
|Device registers by extension
|yes
|----
|Device registers with password
|yes
|----
|Device registers multiple identities
|yes
|----
|2nd GK is supported (mit SIP??)
|no
|----
|Changing registrations between GK1 and GK2 (mit SIP??)
|no
|----
|PBX redirect (UserObject on Master/Phone at Slave registered)
|yes
|----
|Physical Location (@PBX) correct?
|yes
|----
|Device supports STUN protocol
|no
|----
|Device sends NAT - keepalive messages
|yes
|----
|Device usable in [[Howto:Hosting | hosting]] scenarios?
|yes
|----
|Device refreshes the PBX registration
|yes
|----
|Device supports SIP over TCP
|yes
|----
|Device supports SRTP
|no
|----
|Device supports SIPS (SIP over TLS)
|no
|----
|Device supports HTTPS
|yes
|----
|Device supports VAD (Voice activity detection)
|no
|----
|Device supports Auto-Answer (needed when used with CTI client)
|yes
|----
|Supported menu languages
|yes
|}

==Test Results==

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|call using g711a
|yes
|----
|call using g711u
|yes
|----
|call using g729
|yes
|----
|call using g722
|yes
|----
|Overlapped sending
|no
|----
|Device sets up an early media channel for incoming calls
|no
|----
|Device sets up an early media channel for outgoing calls
|no
|----
|Device shows called id number
|no
|----
|Device shows called id name
|no
|----
|Device shows called id display info
|no
|----
|Fax using T.38
|no
|----
|CGPN can be suppressed
|no
|----
|Reverse Media Negotiation
|yes
|----
|Device shows CDPN/CGPN on incoming call
|yes
|----
|Device shows CDPN/CGPN on outgoing call
|yes
|----
|Device shows connected number
|no
|----
|Device shows diverting number
|no
|----
|Device supports distinctive ringing
|yes
|----
|Device supports asymetric codec negotiation
|no
|----
|Device supports codec renegotiation during a conversation
|yes
|----
|Device shows correct display message in case of busy CDPN
|no
|----
|Device shows correct display message in case of not existing CDPN
|no
|----
|Device shows correct display message in case that the call is declined
|no
|----
|3party conference possible
|no
|----
|Device supports display updates during call(needed for Directory Search object)
|no
|----
|Long Time Call (>30 min) works?
|yes
|----
|Registration redirecting works?
|no
|----
|Incoming SRTP call - SRTP not enabled on DUT
|no
|----
|Incoming SRTP call - SRTP enabled on DUT
|no
|----
|Voice Quality OK?
|yes
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|DTMF tones sent correctly
|yes
|----
|DTMF tones received correctly
|yes
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|Device handles incoming hold correctly
|yes
|----
|Device can put a call on hold using correctly(inactive or sendonly)
|no
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|N/A
|----
||inno1 calls inno2. inno1 transfers to testphone.
|N/A
|N/A
|----
|inno1 calls testphone. inno1 transfers to inno2.
|N/A
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|}

=== Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|testphone makes call to a Broadcast Group. inno1 picks up.
|yes
|----
|inno1 makes call to a Broadcast Group. testphone picks up.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
|yes
|----
|inno1 makes call to a Waiting Queue. testphone picks up.
|yes
|}

=== DTMF Features ===

{| border="1"
!Tested feature
!Result
|----
|CFU Activate/Deactivate
|no
|----
|CFB Activate/Deactivate
|no
|----
|CFNR Activate/Deactivate
|no
|----
|Pickup Group
|no
|----
|Pickup Directed
|no
|----
|Park/Unpark
|no
|----
|Park To/Unpark From
|no
|----
|Call Completion Busy
|no
|----
|Call Completion Cancel
|no
|----
|Join Group/Leave Group
|no
|----
|Join All Groups/Leave All Groups
|no
|----
|Enable mobility/Disable mobility
|no
|----
|Enable mobility cw/Disable mobility cw
|no
|----
|Set presence
|no
|}

==Other Features==

===Directory===

{| border="1"
!Tested feature
!Result
|----
|Device built-in directory exists?
|No
|----
|Can be dialled from
|No
|----
|Does CLI resolution
|No
|}

===Hands free===

{| border="1"
!Tested feature
!Result
|----
|Loudspeaker operation works fine
|Yes
|----
|Hands free works fine
|Yes
|----
|Volume adjustable during call
|No
|}

===Keys===

{| border="1"
!Tested feature
!Result
|----
|Device has speed dial keys
|Yes
|----
|Device has programmable function keys
|No
|}

== Known Problems ==
* timezone settings can not be received via DHCP
* Cat-cable is connected via screw terminals not via LSA Plus, installation is quite complicated and should only be done by qualified personal.
* with the curent V6 SR2 firmware, video calls are supported only with basic functionality (transfer,hold and calls to waitingqueues not possible)
* as of the upcoming V7 firmware, video calls will have the same functionality as audio calls(transfer,hold and calls to waitingqueues possible)

== Configuration ==

=== innovaphone configuration ===

The doorphone registers at the PBX as a normal PBX user.

[[Image:2N Helios IP - 2N - SIP Testreport 1.PNG]]

=== doorphone configuration ===

To register the doorphone at the innovaphone PBX you must first configure the SIP-Settings.

[[Image:2N Helios IP - 2N - SIP Testreport 3.PNG]]

In order to be able to send and receive DTMF tones on the doorphone, please configure the audio codecs like described in the screenshot below.

[[Image:2N Helios IP - 2N - SIP Testreport 2.PNG]]

[[Category:Compat|{{PAGENAME}}]]

Howto11r2:2N Helios IP - 2N - SIP Testreport 2017

2017-02-06T12:10:54Z

2ntestteam: /* Device Setup */

Howto11r2:2N Helios IP - 2N - SIP Testreport 2017

2017-02-06T12:10:31Z

2ntestteam: /* Version */

Howto11r2:2N Helios IP - 2N - SIP Testreport 2017

2017-02-06T12:10:06Z

2ntestteam: /* Certification Status */

Howto11r2:2N Helios IP - 2N - SIP Testreport 2017

2017-02-06T12:09:02Z

2ntestteam: /* Summary */

User talk:2ntestteam

2017-02-06T12:08:30Z

2ntestteam: /* Configuration */

==Summary==
The Helios IP - doorphone supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F|recommended product]].

The video functionality of the doorphone was also tested. With the current V6 SR2 firmware only basic video calls are possible. For more information on this topic and other minor problems, please refer to: [[Howto:2N_Helios_IP_-_2N_-_SIP_Testreport#Known_Problems|Known Problems]]

The 2N support team was very fast and made an overall good impression.

The Helios IP - doorphone was retested by its manufacturer 2N in November 2010 using actualized firmware and hardware. The test were completed successfully, no problems were found. For a detailed view of this report, please have a look at [[Howto:2N_Helios_IP_-_2N_-_vendor_Testreport]]

==Certification Status==

{{Template:Compat Status "tested"}}





Testing of this product has been finalized January 16th, 2017.

==Version==
Firmware Version:
2.18.0.27.5

Hardware Version:
570v5

innovaphone Firmware:
11r2 sr22 IPVA[11.3648]

==Device Setup==

{| border="1"
!Tested feature
!Result
|----
|Register Device w/o specific configuration (requires DHCP)
|no
|----
|DHCP is default
|yes
|----
|DHCP yields timeserver and time displays correctly
|no
|----
|SNTP config has TZ string for timezone/dst autoconfig
|no
|----
|DHCP yields correct default gateway
|yes
|----
|Device supports magic registration (e.g. by serial)
|no
|----
|Fixed registrations works
|yes
|----
|Device registers w/o Extension (just by name)
|no
|----
|Device registers by name with non-latin1 characters (e.g. UserÄÖÜ)
|no
|----
|Device registers by extension
|yes
|----
|Device registers with password
|yes
|----
|Device registers multiple identities
|yes
|----
|2nd GK is supported (mit SIP??)
|no
|----
|Changing registrations between GK1 and GK2 (mit SIP??)
|no
|----
|PBX redirect (UserObject on Master/Phone at Slave registered)
|yes
|----
|Physical Location (@PBX) correct?
|yes
|----
|Device supports STUN protocol
|no
|----
|Device sends NAT - keepalive messages
|yes
|----
|Device usable in [[Howto:Hosting | hosting]] scenarios?
|yes
|----
|Device refreshes the PBX registration
|yes
|----
|Device supports SIP over TCP
|yes
|----
|Device supports SRTP
|no
|----
|Device supports SIPS (SIP over TLS)
|no
|----
|Device supports HTTPS
|yes
|----
|Device supports VAD (Voice activity detection)
|no
|----
|Device supports Auto-Answer (needed when used with CTI client)
|yes
|----
|Supported menu languages
|yes
|}

==Test Results==

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|call using g711a
|yes
|----
|call using g711u
|yes
|----
|call using g729
|yes
|----
|call using g722
|yes
|----
|Overlapped sending
|no
|----
|Device sets up an early media channel for incoming calls
|no
|----
|Device sets up an early media channel for outgoing calls
|no
|----
|Device shows called id number
|no
|----
|Device shows called id name
|no
|----
|Device shows called id display info
|no
|----
|Fax using T.38
|no
|----
|CGPN can be suppressed
|no
|----
|Reverse Media Negotiation
|yes
|----
|Device shows CDPN/CGPN on incoming call
|yes
|----
|Device shows CDPN/CGPN on outgoing call
|yes
|----
|Device shows connected number
|no
|----
|Device shows diverting number
|no
|----
|Device supports distinctive ringing
|yes
|----
|Device supports asymetric codec negotiation
|no
|----
|Device supports codec renegotiation during a conversation
|yes
|----
|Device shows correct display message in case of busy CDPN
|no
|----
|Device shows correct display message in case of not existing CDPN
|no
|----
|Device shows correct display message in case that the call is declined
|no
|----
|3party conference possible
|no
|----
|Device supports display updates during call(needed for Directory Search object)
|no
|----
|Long Time Call (>30 min) works?
|yes
|----
|Registration redirecting works?
|no
|----
|Incoming SRTP call - SRTP not enabled on DUT
|no
|----
|Incoming SRTP call - SRTP enabled on DUT
|no
|----
|Voice Quality OK?
|yes
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|DTMF tones sent correctly
|yes
|----
|DTMF tones received correctly
|yes
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|Device handles incoming hold correctly
|yes
|----
|Device can put a call on hold using correctly(inactive or sendonly)
|no
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|N/A
|----
||inno1 calls inno2. inno1 transfers to testphone.
|N/A
|N/A
|----
|inno1 calls testphone. inno1 transfers to inno2.
|N/A
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|}

=== Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|testphone makes call to a Broadcast Group. inno1 picks up.
|yes
|----
|inno1 makes call to a Broadcast Group. testphone picks up.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
|yes
|----
|inno1 makes call to a Waiting Queue. testphone picks up.
|yes
|}

=== DTMF Features ===

{| border="1"
!Tested feature
!Result
|----
|CFU Activate/Deactivate
|no
|----
|CFB Activate/Deactivate
|no
|----
|CFNR Activate/Deactivate
|no
|----
|Pickup Group
|no
|----
|Pickup Directed
|no
|----
|Park/Unpark
|no
|----
|Park To/Unpark From
|no
|----
|Call Completion Busy
|no
|----
|Call Completion Cancel
|no
|----
|Join Group/Leave Group
|no
|----
|Join All Groups/Leave All Groups
|no
|----
|Enable mobility/Disable mobility
|no
|----
|Enable mobility cw/Disable mobility cw
|no
|----
|Set presence
|no
|}

==Other Features==

===Directory===

{| border="1"
!Tested feature
!Result
|----
|Device built-in directory
|yes
|----
|Exists
|yes
|----
|Can be dialled from
|yes
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|yes
|}

{| border="1"
!Tested feature
!Result
|----
|External LDAP Server supported
|no
|----
|Can be dialled from
|no
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|no
|}

===Keys===

{| border="1"
!Tested feature
!Result
|----
|Device has speed dial keys
|yes
|----
|Device has programmable function keys
|yes
|----
|Device has partner keys
|yes
|}

===CTI Features (with SOAP / TAPI / myPBX) ===

{| border="1"
!Tested feature
!Result
|----
|User Call - outgoing call
|no
|----
|User Connect - Answer incoming call
|no
|----
|User Reject - Reject alerting call
|no
|----
|User Disconnect - Disconnect active call
|no
|----
|User Hold - Put connected call on hold
|no
|----
|User Hold Retrieve - Retrieve call on hold
|no
|----
|User Transfer - Transfer with Consult
|no
|----
|User Transfer - Transfer with Consult (Alerting only)
|no
|----
|User Transfer - Blind Transfer
|no
|----
|3PTY - Make 3rd Party Call
|no
|----
|Connected Number Update on Display
|no
|}

===UC Features===

{| border="1"
!Tested feature
!Result
|----
|Video calls possible?
|yes
|----
|Video conference possible? (max. amount of participants)
|no
|----
|Video Codecs
|yes
|----
|enable/disable video during call
|yes
|----
|Set own presence possible?
|no
|----
|See presence of others possible?
|no
|----
|chat with mypbx client possible?
|no
|----
|chat with same vendor client possible?
|no
|----
|send IM - messages to phones possible?
|no
|}

== Configuration ==
=== innovaphone configuration ===
The innovaphone Virtual Appliance user interface can be opened on any computer connected with the innovaphone Virtual Appliance. Start a web browser on your computer. Enter innovaphone Virtual Appliance in the address line of the browser. The innovaphone Virtual Appliance user interface opens and enter the password. In settings innovaphone Virtual Appliance go to: PBX > Objects and choose new (User).

Enter the Phone Number, Domain, Password, Proxy Address, Registar Address and click Apply.

Enter the Phone Number, Domain, Password, Proxy Address, Registar Address and click Apply.

=== 3rd party product configuration ===

Howto11r2:2N Helios IP - 2N - 3rd Party Product

2017-02-06T12:07:52Z

2ntestteam: /* Summary */

[[Image:2N logo new.png||200px|right]]

==Product Name==
[https://www.2n.cz/en_GB/products/intercoms 2N Helios IP Intercoms]

==Certification Status==





{{Template:Compat_Status_referral_product_new}}

Testing of this product has been finalized January 16th, 2017.

==Category==
{{Category:3rdParty_Terminals}}
[[Category:Referral Product|{{PAGENAME}}]]
[[Category:3rdParty_Terminals|{{PAGENAME}}]]

==Functions==
* Two way audio and video door entry communication solution over SIP
* Voice, video, keypad and proximity card access control system in one box
* Remote access control
* Relay contact to an electrical lock
* Upgradeable by Vandal Resistant cover
* Wide variety of models
* Remote PC configuration

==Version==

* Helios IP Firmware Version: 2.18.0.27.5
* Helios IP Hardware Version: 570v5
* innovaphone PBX Firmware Version: 11r2 sr22 IPVA[11.3648]

==Vendor==

[[Image:2N logo.png|150px]]

2N TELEKOMUNIKACE a.s.

Modřanská 621/72

143 01 Praha 4

Česká republika

[https://www.2n.cz/en_GB/dashboard 2N TELEKOMUNIKACE a.s. ]

==Description==

The 2N Helios IP door intercoms can smartly replace traditional doorbell push-button speakerphone panels and all wiring, bells and home intercom installations in buildings with structured cabling. The intercoms provide more advanced and wider services than standard home phones. The installation is very easy, all you need is connect the intercom to the other LAN elements using a UTP cable and set necessary parameters.

Thanks to the integrated SIP protocol, the intercom can make use of all VoIP services: call forwarding at absence (to another office, VoiceMail or a cellular phone) or call transfer (from the secretary’s office to the required person, e.g.).

The intercoms are equipped with a programmable number of quick dial buttons for speed calling to the users whose numbers are included in the intercom Users list. Each of the quick dial buttons can be assigned up to three phone numbers, which can be dialled in parallel or sequentially. Thanks to an integrated time sheet it is possible to configure each of the buttons in such a way that the called party is always accessible and/or calls to selected phone numbers can be barred off the working hours.

Some 2N Helios IP models are equipped with a numeric keypad, which can be used as a code lock or a standard push-button phone.

The 2N Helios IP intercoms help LAN users scan the area in front of the camera via video streaming. Thanks to the full ONVIF support, the intercoms can become part of the Video Surveillance System in your facility.

The 2N Helios IP intercoms can be equipped with an RFID card reader for authorised access control and thus become a key part of your surveillance or attendance control systems.

The 2N Helios IP intercom is equipped with a relay switch (and, optionally, other relays and outputs), which controls the electric lock or other equipment connected to the intercom. Its activation time and method can be programmed flexibly: it can be activated by a code, automatically by a call, by pressing a button, and so on.

==Competitive Analysis==


2N Helios IP is a unique solution for modern house door entry comunication using IP technology. Unique selling points:

* Full SIP/H.264 video door entry system
* All in one box (Voice, video, access control, keypad)
* Additionally upgradeable and expandable
* Modern design
* Modular system
* Reliable product

==Summary==


The Helios IP - doorphone supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F|recommended product]].

Reports of Certifications:
* 01/2017 - For a detailed analysis of the Helios IP, please have a look at the [[Howto:2N_Helios_IP_-_2N_-_SIP_Testreport_2017|2N Helios IP - 2N - SIP Testreport 2017]].
* 10/2010 - The Helios IP was retested by its manufacturer 2N in November 2010 using actualized firmware and hardware. The test were completed successfully, no problems were found. For a detailed view of this report, please have a look at [[Howto:2N_Helios_IP_-_2N_-_vendor_Testreport]]
* 06/2008 - The video functionality of the Helios IP was also tested. With the V6 SR2 firmware only basic video calls were possible. For more information on this topic, please refer to: [[Howto:2N_Helios_IP_-_2N_-_SIP_Testreport]]

==Pricing==


Starting at 650 EUR GDPL.

==Contact==


{|
| Name: || Robert Urbánek
|-
| Position: || Product Manager
|-
| Company: || 2N Telekomunikace a.s.
|-
| Street: || Modranska 621
|-
| Country/ZIP/City || CZ-14301 Praha 4
|-
| Tel: || +420 225271329
|-
| Mail: || [mailto:urbanek@2n.cz urbanek@2n.cz]
|}

[[Category:Compat|{{PAGENAME}}]]

User talk:2ntestteam

2017-02-06T10:34:46Z

2ntestteam: /* CTI Features (with SOAP / TAPI / myPBX) */

==Summary==
The Helios IP - doorphone supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F|recommended product]].

The video functionality of the doorphone was also tested. With the current V6 SR2 firmware only basic video calls are possible. For more information on this topic and other minor problems, please refer to: [[Howto:2N_Helios_IP_-_2N_-_SIP_Testreport#Known_Problems|Known Problems]]

The 2N support team was very fast and made an overall good impression.

The Helios IP - doorphone was retested by its manufacturer 2N in November 2010 using actualized firmware and hardware. The test were completed successfully, no problems were found. For a detailed view of this report, please have a look at [[Howto:2N_Helios_IP_-_2N_-_vendor_Testreport]]

==Certification Status==

{{Template:Compat Status "tested"}}





Testing of this product has been finalized January 16th, 2017.

==Version==
Firmware Version:
2.18.0.27.5

Hardware Version:
570v5

innovaphone Firmware:
11r2 sr22 IPVA[11.3648]

==Device Setup==

{| border="1"
!Tested feature
!Result
|----
|Register Device w/o specific configuration (requires DHCP)
|no
|----
|DHCP is default
|yes
|----
|DHCP yields timeserver and time displays correctly
|no
|----
|SNTP config has TZ string for timezone/dst autoconfig
|no
|----
|DHCP yields correct default gateway
|yes
|----
|Device supports magic registration (e.g. by serial)
|no
|----
|Fixed registrations works
|yes
|----
|Device registers w/o Extension (just by name)
|no
|----
|Device registers by name with non-latin1 characters (e.g. UserÄÖÜ)
|no
|----
|Device registers by extension
|yes
|----
|Device registers with password
|yes
|----
|Device registers multiple identities
|yes
|----
|2nd GK is supported (mit SIP??)
|no
|----
|Changing registrations between GK1 and GK2 (mit SIP??)
|no
|----
|PBX redirect (UserObject on Master/Phone at Slave registered)
|yes
|----
|Physical Location (@PBX) correct?
|yes
|----
|Device supports STUN protocol
|no
|----
|Device sends NAT - keepalive messages
|yes
|----
|Device usable in [[Howto:Hosting | hosting]] scenarios?
|yes
|----
|Device refreshes the PBX registration
|yes
|----
|Device supports SIP over TCP
|yes
|----
|Device supports SRTP
|no
|----
|Device supports SIPS (SIP over TLS)
|no
|----
|Device supports HTTPS
|yes
|----
|Device supports VAD (Voice activity detection)
|no
|----
|Device supports Auto-Answer (needed when used with CTI client)
|yes
|----
|Supported menu languages
|yes
|}

==Test Results==

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|call using g711a
|yes
|----
|call using g711u
|yes
|----
|call using g729
|yes
|----
|call using g722
|yes
|----
|Overlapped sending
|no
|----
|Device sets up an early media channel for incoming calls
|no
|----
|Device sets up an early media channel for outgoing calls
|no
|----
|Device shows called id number
|no
|----
|Device shows called id name
|no
|----
|Device shows called id display info
|no
|----
|Fax using T.38
|no
|----
|CGPN can be suppressed
|no
|----
|Reverse Media Negotiation
|yes
|----
|Device shows CDPN/CGPN on incoming call
|yes
|----
|Device shows CDPN/CGPN on outgoing call
|yes
|----
|Device shows connected number
|no
|----
|Device shows diverting number
|no
|----
|Device supports distinctive ringing
|yes
|----
|Device supports asymetric codec negotiation
|no
|----
|Device supports codec renegotiation during a conversation
|yes
|----
|Device shows correct display message in case of busy CDPN
|no
|----
|Device shows correct display message in case of not existing CDPN
|no
|----
|Device shows correct display message in case that the call is declined
|no
|----
|3party conference possible
|no
|----
|Device supports display updates during call(needed for Directory Search object)
|no
|----
|Long Time Call (>30 min) works?
|yes
|----
|Registration redirecting works?
|no
|----
|Incoming SRTP call - SRTP not enabled on DUT
|no
|----
|Incoming SRTP call - SRTP enabled on DUT
|no
|----
|Voice Quality OK?
|yes
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|DTMF tones sent correctly
|yes
|----
|DTMF tones received correctly
|yes
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|Device handles incoming hold correctly
|yes
|----
|Device can put a call on hold using correctly(inactive or sendonly)
|no
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|N/A
|----
||inno1 calls inno2. inno1 transfers to testphone.
|N/A
|N/A
|----
|inno1 calls testphone. inno1 transfers to inno2.
|N/A
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|}

=== Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|testphone makes call to a Broadcast Group. inno1 picks up.
|yes
|----
|inno1 makes call to a Broadcast Group. testphone picks up.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
|yes
|----
|inno1 makes call to a Waiting Queue. testphone picks up.
|yes
|}

=== DTMF Features ===

{| border="1"
!Tested feature
!Result
|----
|CFU Activate/Deactivate
|no
|----
|CFB Activate/Deactivate
|no
|----
|CFNR Activate/Deactivate
|no
|----
|Pickup Group
|no
|----
|Pickup Directed
|no
|----
|Park/Unpark
|no
|----
|Park To/Unpark From
|no
|----
|Call Completion Busy
|no
|----
|Call Completion Cancel
|no
|----
|Join Group/Leave Group
|no
|----
|Join All Groups/Leave All Groups
|no
|----
|Enable mobility/Disable mobility
|no
|----
|Enable mobility cw/Disable mobility cw
|no
|----
|Set presence
|no
|}

==Other Features==

===Directory===

{| border="1"
!Tested feature
!Result
|----
|Device built-in directory
|yes
|----
|Exists
|yes
|----
|Can be dialled from
|yes
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|yes
|}

{| border="1"
!Tested feature
!Result
|----
|External LDAP Server supported
|no
|----
|Can be dialled from
|no
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|no
|}

===Keys===

{| border="1"
!Tested feature
!Result
|----
|Device has speed dial keys
|yes
|----
|Device has programmable function keys
|yes
|----
|Device has partner keys
|yes
|}

===CTI Features (with SOAP / TAPI / myPBX) ===

{| border="1"
!Tested feature
!Result
|----
|User Call - outgoing call
|no
|----
|User Connect - Answer incoming call
|no
|----
|User Reject - Reject alerting call
|no
|----
|User Disconnect - Disconnect active call
|no
|----
|User Hold - Put connected call on hold
|no
|----
|User Hold Retrieve - Retrieve call on hold
|no
|----
|User Transfer - Transfer with Consult
|no
|----
|User Transfer - Transfer with Consult (Alerting only)
|no
|----
|User Transfer - Blind Transfer
|no
|----
|3PTY - Make 3rd Party Call
|no
|----
|Connected Number Update on Display
|no
|}

===UC Features===

{| border="1"
!Tested feature
!Result
|----
|Video calls possible?
|yes
|----
|Video conference possible? (max. amount of participants)
|no
|----
|Video Codecs
|yes
|----
|enable/disable video during call
|yes
|----
|Set own presence possible?
|no
|----
|See presence of others possible?
|no
|----
|chat with mypbx client possible?
|no
|----
|chat with same vendor client possible?
|no
|----
|send IM - messages to phones possible?
|no
|}

== Configuration ==

=== innovaphone configuration ===

=== 3rd party product configuration ===

User talk:2ntestteam

2017-02-06T10:34:32Z

2ntestteam: /* CTI Features (with SOAP / TAPI / myPBX) */

==Summary==
The Helios IP - doorphone supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F|recommended product]].

The video functionality of the doorphone was also tested. With the current V6 SR2 firmware only basic video calls are possible. For more information on this topic and other minor problems, please refer to: [[Howto:2N_Helios_IP_-_2N_-_SIP_Testreport#Known_Problems|Known Problems]]

The 2N support team was very fast and made an overall good impression.

The Helios IP - doorphone was retested by its manufacturer 2N in November 2010 using actualized firmware and hardware. The test were completed successfully, no problems were found. For a detailed view of this report, please have a look at [[Howto:2N_Helios_IP_-_2N_-_vendor_Testreport]]

==Certification Status==

{{Template:Compat Status "tested"}}





Testing of this product has been finalized January 16th, 2017.

==Version==
Firmware Version:
2.18.0.27.5

Hardware Version:
570v5

innovaphone Firmware:
11r2 sr22 IPVA[11.3648]

==Device Setup==

{| border="1"
!Tested feature
!Result
|----
|Register Device w/o specific configuration (requires DHCP)
|no
|----
|DHCP is default
|yes
|----
|DHCP yields timeserver and time displays correctly
|no
|----
|SNTP config has TZ string for timezone/dst autoconfig
|no
|----
|DHCP yields correct default gateway
|yes
|----
|Device supports magic registration (e.g. by serial)
|no
|----
|Fixed registrations works
|yes
|----
|Device registers w/o Extension (just by name)
|no
|----
|Device registers by name with non-latin1 characters (e.g. UserÄÖÜ)
|no
|----
|Device registers by extension
|yes
|----
|Device registers with password
|yes
|----
|Device registers multiple identities
|yes
|----
|2nd GK is supported (mit SIP??)
|no
|----
|Changing registrations between GK1 and GK2 (mit SIP??)
|no
|----
|PBX redirect (UserObject on Master/Phone at Slave registered)
|yes
|----
|Physical Location (@PBX) correct?
|yes
|----
|Device supports STUN protocol
|no
|----
|Device sends NAT - keepalive messages
|yes
|----
|Device usable in [[Howto:Hosting | hosting]] scenarios?
|yes
|----
|Device refreshes the PBX registration
|yes
|----
|Device supports SIP over TCP
|yes
|----
|Device supports SRTP
|no
|----
|Device supports SIPS (SIP over TLS)
|no
|----
|Device supports HTTPS
|yes
|----
|Device supports VAD (Voice activity detection)
|no
|----
|Device supports Auto-Answer (needed when used with CTI client)
|yes
|----
|Supported menu languages
|yes
|}

==Test Results==

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|call using g711a
|yes
|----
|call using g711u
|yes
|----
|call using g729
|yes
|----
|call using g722
|yes
|----
|Overlapped sending
|no
|----
|Device sets up an early media channel for incoming calls
|no
|----
|Device sets up an early media channel for outgoing calls
|no
|----
|Device shows called id number
|no
|----
|Device shows called id name
|no
|----
|Device shows called id display info
|no
|----
|Fax using T.38
|no
|----
|CGPN can be suppressed
|no
|----
|Reverse Media Negotiation
|yes
|----
|Device shows CDPN/CGPN on incoming call
|yes
|----
|Device shows CDPN/CGPN on outgoing call
|yes
|----
|Device shows connected number
|no
|----
|Device shows diverting number
|no
|----
|Device supports distinctive ringing
|yes
|----
|Device supports asymetric codec negotiation
|no
|----
|Device supports codec renegotiation during a conversation
|yes
|----
|Device shows correct display message in case of busy CDPN
|no
|----
|Device shows correct display message in case of not existing CDPN
|no
|----
|Device shows correct display message in case that the call is declined
|no
|----
|3party conference possible
|no
|----
|Device supports display updates during call(needed for Directory Search object)
|no
|----
|Long Time Call (>30 min) works?
|yes
|----
|Registration redirecting works?
|no
|----
|Incoming SRTP call - SRTP not enabled on DUT
|no
|----
|Incoming SRTP call - SRTP enabled on DUT
|no
|----
|Voice Quality OK?
|yes
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|DTMF tones sent correctly
|yes
|----
|DTMF tones received correctly
|yes
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|Device handles incoming hold correctly
|yes
|----
|Device can put a call on hold using correctly(inactive or sendonly)
|no
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|N/A
|----
||inno1 calls inno2. inno1 transfers to testphone.
|N/A
|N/A
|----
|inno1 calls testphone. inno1 transfers to inno2.
|N/A
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|}

=== Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|testphone makes call to a Broadcast Group. inno1 picks up.
|yes
|----
|inno1 makes call to a Broadcast Group. testphone picks up.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
|yes
|----
|inno1 makes call to a Waiting Queue. testphone picks up.
|yes
|}

=== DTMF Features ===

{| border="1"
!Tested feature
!Result
|----
|CFU Activate/Deactivate
|no
|----
|CFB Activate/Deactivate
|no
|----
|CFNR Activate/Deactivate
|no
|----
|Pickup Group
|no
|----
|Pickup Directed
|no
|----
|Park/Unpark
|no
|----
|Park To/Unpark From
|no
|----
|Call Completion Busy
|no
|----
|Call Completion Cancel
|no
|----
|Join Group/Leave Group
|no
|----
|Join All Groups/Leave All Groups
|no
|----
|Enable mobility/Disable mobility
|no
|----
|Enable mobility cw/Disable mobility cw
|no
|----
|Set presence
|no
|}

==Other Features==

===Directory===

{| border="1"
!Tested feature
!Result
|----
|Device built-in directory
|yes
|----
|Exists
|yes
|----
|Can be dialled from
|yes
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|yes
|}

{| border="1"
!Tested feature
!Result
|----
|External LDAP Server supported
|no
|----
|Can be dialled from
|no
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|no
|}

===Keys===

{| border="1"
!Tested feature
!Result
|----
|Device has speed dial keys
|yes
|----
|Device has programmable function keys
|yes
|----
|Device has partner keys
|yes
|}

===CTI Features (with SOAP / TAPI / myPBX) ===

{| border="1"
!Tested feature
!Result
|----
|User Call - outgoing call
|no
|----
|User Connect - Answer incoming call
|no
|----
|User Reject - Reject alerting call
|no
|----
|User Disconnect - Disconnect active call
|no
|----
|User Hold - Put connected call on hold
|no
|----
|User Hold Retrieve - Retrieve call on hold
|no
|----
|User Transfer - Transfer with Consult
|no
|----
|User Transfer - Transfer with Consult (Alerting only)
|no
|----
|User Transfer - Blind Transfer
|no
|----
|3PTY - Make 3rd Party Call
|no
|----
|Connected Number Update on Display
|no
|}

===UC Features===

{| border="1"
!Tested feature
!Result
|----
|Video calls possible?
|yes
|----
|Video conference possible? (max. amount of participants)
|no
|----
|Video Codecs
|yes
|----
|enable/disable video during call
|yes
|----
|Set own presence possible?
|no
|----
|See presence of others possible?
|no
|----
|chat with mypbx client possible?
|no
|----
|chat with same vendor client possible?
|no
|----
|send IM - messages to phones possible?
|no
|}

== Configuration ==

=== innovaphone configuration ===

=== 3rd party product configuration ===

User talk:2ntestteam

2017-02-06T10:34:09Z

2ntestteam: /* UC Features */

==Summary==
The Helios IP - doorphone supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F|recommended product]].

The video functionality of the doorphone was also tested. With the current V6 SR2 firmware only basic video calls are possible. For more information on this topic and other minor problems, please refer to: [[Howto:2N_Helios_IP_-_2N_-_SIP_Testreport#Known_Problems|Known Problems]]

The 2N support team was very fast and made an overall good impression.

The Helios IP - doorphone was retested by its manufacturer 2N in November 2010 using actualized firmware and hardware. The test were completed successfully, no problems were found. For a detailed view of this report, please have a look at [[Howto:2N_Helios_IP_-_2N_-_vendor_Testreport]]

==Certification Status==

{{Template:Compat Status "tested"}}





Testing of this product has been finalized January 16th, 2017.

==Version==
Firmware Version:
2.18.0.27.5

Hardware Version:
570v5

innovaphone Firmware:
11r2 sr22 IPVA[11.3648]

==Device Setup==

{| border="1"
!Tested feature
!Result
|----
|Register Device w/o specific configuration (requires DHCP)
|no
|----
|DHCP is default
|yes
|----
|DHCP yields timeserver and time displays correctly
|no
|----
|SNTP config has TZ string for timezone/dst autoconfig
|no
|----
|DHCP yields correct default gateway
|yes
|----
|Device supports magic registration (e.g. by serial)
|no
|----
|Fixed registrations works
|yes
|----
|Device registers w/o Extension (just by name)
|no
|----
|Device registers by name with non-latin1 characters (e.g. UserÄÖÜ)
|no
|----
|Device registers by extension
|yes
|----
|Device registers with password
|yes
|----
|Device registers multiple identities
|yes
|----
|2nd GK is supported (mit SIP??)
|no
|----
|Changing registrations between GK1 and GK2 (mit SIP??)
|no
|----
|PBX redirect (UserObject on Master/Phone at Slave registered)
|yes
|----
|Physical Location (@PBX) correct?
|yes
|----
|Device supports STUN protocol
|no
|----
|Device sends NAT - keepalive messages
|yes
|----
|Device usable in [[Howto:Hosting | hosting]] scenarios?
|yes
|----
|Device refreshes the PBX registration
|yes
|----
|Device supports SIP over TCP
|yes
|----
|Device supports SRTP
|no
|----
|Device supports SIPS (SIP over TLS)
|no
|----
|Device supports HTTPS
|yes
|----
|Device supports VAD (Voice activity detection)
|no
|----
|Device supports Auto-Answer (needed when used with CTI client)
|yes
|----
|Supported menu languages
|yes
|}

==Test Results==

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|call using g711a
|yes
|----
|call using g711u
|yes
|----
|call using g729
|yes
|----
|call using g722
|yes
|----
|Overlapped sending
|no
|----
|Device sets up an early media channel for incoming calls
|no
|----
|Device sets up an early media channel for outgoing calls
|no
|----
|Device shows called id number
|no
|----
|Device shows called id name
|no
|----
|Device shows called id display info
|no
|----
|Fax using T.38
|no
|----
|CGPN can be suppressed
|no
|----
|Reverse Media Negotiation
|yes
|----
|Device shows CDPN/CGPN on incoming call
|yes
|----
|Device shows CDPN/CGPN on outgoing call
|yes
|----
|Device shows connected number
|no
|----
|Device shows diverting number
|no
|----
|Device supports distinctive ringing
|yes
|----
|Device supports asymetric codec negotiation
|no
|----
|Device supports codec renegotiation during a conversation
|yes
|----
|Device shows correct display message in case of busy CDPN
|no
|----
|Device shows correct display message in case of not existing CDPN
|no
|----
|Device shows correct display message in case that the call is declined
|no
|----
|3party conference possible
|no
|----
|Device supports display updates during call(needed for Directory Search object)
|no
|----
|Long Time Call (>30 min) works?
|yes
|----
|Registration redirecting works?
|no
|----
|Incoming SRTP call - SRTP not enabled on DUT
|no
|----
|Incoming SRTP call - SRTP enabled on DUT
|no
|----
|Voice Quality OK?
|yes
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|DTMF tones sent correctly
|yes
|----
|DTMF tones received correctly
|yes
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|Device handles incoming hold correctly
|yes
|----
|Device can put a call on hold using correctly(inactive or sendonly)
|no
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|N/A
|----
||inno1 calls inno2. inno1 transfers to testphone.
|N/A
|N/A
|----
|inno1 calls testphone. inno1 transfers to inno2.
|N/A
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|}

=== Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|testphone makes call to a Broadcast Group. inno1 picks up.
|yes
|----
|inno1 makes call to a Broadcast Group. testphone picks up.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
|yes
|----
|inno1 makes call to a Waiting Queue. testphone picks up.
|yes
|}

=== DTMF Features ===

{| border="1"
!Tested feature
!Result
|----
|CFU Activate/Deactivate
|no
|----
|CFB Activate/Deactivate
|no
|----
|CFNR Activate/Deactivate
|no
|----
|Pickup Group
|no
|----
|Pickup Directed
|no
|----
|Park/Unpark
|no
|----
|Park To/Unpark From
|no
|----
|Call Completion Busy
|no
|----
|Call Completion Cancel
|no
|----
|Join Group/Leave Group
|no
|----
|Join All Groups/Leave All Groups
|no
|----
|Enable mobility/Disable mobility
|no
|----
|Enable mobility cw/Disable mobility cw
|no
|----
|Set presence
|no
|}

==Other Features==

===Directory===

{| border="1"
!Tested feature
!Result
|----
|Device built-in directory
|yes
|----
|Exists
|yes
|----
|Can be dialled from
|yes
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|yes
|}

{| border="1"
!Tested feature
!Result
|----
|External LDAP Server supported
|no
|----
|Can be dialled from
|no
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|no
|}

===Keys===

{| border="1"
!Tested feature
!Result
|----
|Device has speed dial keys
|yes
|----
|Device has programmable function keys
|yes
|----
|Device has partner keys
|yes
|}

===CTI Features (with SOAP / TAPI / myPBX) ===

{| border="1"
!Tested feature
!Result
|----
|User Call - outgoing call
|
|----
|User Connect - Answer incoming call
|
|----
|User Reject - Reject alerting call
|
|----
|User Disconnect - Disconnect active call
|
|----
|User Hold - Put connected call on hold
|
|----
|User Hold Retrieve - Retrieve call on hold
|
|----
|User Transfer - Transfer with Consult
|
|----
|User Transfer - Transfer with Consult (Alerting only)
|
|----
|User Transfer - Blind Transfer
|
|----
|3PTY - Make 3rd Party Call
|
|----
|Connected Number Update on Display
|
|}

===UC Features===

{| border="1"
!Tested feature
!Result
|----
|Video calls possible?
|yes
|----
|Video conference possible? (max. amount of participants)
|no
|----
|Video Codecs
|yes
|----
|enable/disable video during call
|yes
|----
|Set own presence possible?
|no
|----
|See presence of others possible?
|no
|----
|chat with mypbx client possible?
|no
|----
|chat with same vendor client possible?
|no
|----
|send IM - messages to phones possible?
|no
|}

== Configuration ==

=== innovaphone configuration ===

=== 3rd party product configuration ===

User talk:2ntestteam

2017-02-06T10:33:38Z

2ntestteam: /* Keys */

==Summary==
The Helios IP - doorphone supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F|recommended product]].

The video functionality of the doorphone was also tested. With the current V6 SR2 firmware only basic video calls are possible. For more information on this topic and other minor problems, please refer to: [[Howto:2N_Helios_IP_-_2N_-_SIP_Testreport#Known_Problems|Known Problems]]

The 2N support team was very fast and made an overall good impression.

The Helios IP - doorphone was retested by its manufacturer 2N in November 2010 using actualized firmware and hardware. The test were completed successfully, no problems were found. For a detailed view of this report, please have a look at [[Howto:2N_Helios_IP_-_2N_-_vendor_Testreport]]

==Certification Status==

{{Template:Compat Status "tested"}}





Testing of this product has been finalized January 16th, 2017.

==Version==
Firmware Version:
2.18.0.27.5

Hardware Version:
570v5

innovaphone Firmware:
11r2 sr22 IPVA[11.3648]

==Device Setup==

{| border="1"
!Tested feature
!Result
|----
|Register Device w/o specific configuration (requires DHCP)
|no
|----
|DHCP is default
|yes
|----
|DHCP yields timeserver and time displays correctly
|no
|----
|SNTP config has TZ string for timezone/dst autoconfig
|no
|----
|DHCP yields correct default gateway
|yes
|----
|Device supports magic registration (e.g. by serial)
|no
|----
|Fixed registrations works
|yes
|----
|Device registers w/o Extension (just by name)
|no
|----
|Device registers by name with non-latin1 characters (e.g. UserÄÖÜ)
|no
|----
|Device registers by extension
|yes
|----
|Device registers with password
|yes
|----
|Device registers multiple identities
|yes
|----
|2nd GK is supported (mit SIP??)
|no
|----
|Changing registrations between GK1 and GK2 (mit SIP??)
|no
|----
|PBX redirect (UserObject on Master/Phone at Slave registered)
|yes
|----
|Physical Location (@PBX) correct?
|yes
|----
|Device supports STUN protocol
|no
|----
|Device sends NAT - keepalive messages
|yes
|----
|Device usable in [[Howto:Hosting | hosting]] scenarios?
|yes
|----
|Device refreshes the PBX registration
|yes
|----
|Device supports SIP over TCP
|yes
|----
|Device supports SRTP
|no
|----
|Device supports SIPS (SIP over TLS)
|no
|----
|Device supports HTTPS
|yes
|----
|Device supports VAD (Voice activity detection)
|no
|----
|Device supports Auto-Answer (needed when used with CTI client)
|yes
|----
|Supported menu languages
|yes
|}

==Test Results==

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|call using g711a
|yes
|----
|call using g711u
|yes
|----
|call using g729
|yes
|----
|call using g722
|yes
|----
|Overlapped sending
|no
|----
|Device sets up an early media channel for incoming calls
|no
|----
|Device sets up an early media channel for outgoing calls
|no
|----
|Device shows called id number
|no
|----
|Device shows called id name
|no
|----
|Device shows called id display info
|no
|----
|Fax using T.38
|no
|----
|CGPN can be suppressed
|no
|----
|Reverse Media Negotiation
|yes
|----
|Device shows CDPN/CGPN on incoming call
|yes
|----
|Device shows CDPN/CGPN on outgoing call
|yes
|----
|Device shows connected number
|no
|----
|Device shows diverting number
|no
|----
|Device supports distinctive ringing
|yes
|----
|Device supports asymetric codec negotiation
|no
|----
|Device supports codec renegotiation during a conversation
|yes
|----
|Device shows correct display message in case of busy CDPN
|no
|----
|Device shows correct display message in case of not existing CDPN
|no
|----
|Device shows correct display message in case that the call is declined
|no
|----
|3party conference possible
|no
|----
|Device supports display updates during call(needed for Directory Search object)
|no
|----
|Long Time Call (>30 min) works?
|yes
|----
|Registration redirecting works?
|no
|----
|Incoming SRTP call - SRTP not enabled on DUT
|no
|----
|Incoming SRTP call - SRTP enabled on DUT
|no
|----
|Voice Quality OK?
|yes
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|DTMF tones sent correctly
|yes
|----
|DTMF tones received correctly
|yes
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|Device handles incoming hold correctly
|yes
|----
|Device can put a call on hold using correctly(inactive or sendonly)
|no
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|N/A
|----
||inno1 calls inno2. inno1 transfers to testphone.
|N/A
|N/A
|----
|inno1 calls testphone. inno1 transfers to inno2.
|N/A
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|}

=== Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|testphone makes call to a Broadcast Group. inno1 picks up.
|yes
|----
|inno1 makes call to a Broadcast Group. testphone picks up.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
|yes
|----
|inno1 makes call to a Waiting Queue. testphone picks up.
|yes
|}

=== DTMF Features ===

{| border="1"
!Tested feature
!Result
|----
|CFU Activate/Deactivate
|no
|----
|CFB Activate/Deactivate
|no
|----
|CFNR Activate/Deactivate
|no
|----
|Pickup Group
|no
|----
|Pickup Directed
|no
|----
|Park/Unpark
|no
|----
|Park To/Unpark From
|no
|----
|Call Completion Busy
|no
|----
|Call Completion Cancel
|no
|----
|Join Group/Leave Group
|no
|----
|Join All Groups/Leave All Groups
|no
|----
|Enable mobility/Disable mobility
|no
|----
|Enable mobility cw/Disable mobility cw
|no
|----
|Set presence
|no
|}

==Other Features==

===Directory===

{| border="1"
!Tested feature
!Result
|----
|Device built-in directory
|yes
|----
|Exists
|yes
|----
|Can be dialled from
|yes
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|yes
|}

{| border="1"
!Tested feature
!Result
|----
|External LDAP Server supported
|no
|----
|Can be dialled from
|no
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|no
|}

===Keys===

{| border="1"
!Tested feature
!Result
|----
|Device has speed dial keys
|yes
|----
|Device has programmable function keys
|yes
|----
|Device has partner keys
|yes
|}

===CTI Features (with SOAP / TAPI / myPBX) ===

{| border="1"
!Tested feature
!Result
|----
|User Call - outgoing call
|
|----
|User Connect - Answer incoming call
|
|----
|User Reject - Reject alerting call
|
|----
|User Disconnect - Disconnect active call
|
|----
|User Hold - Put connected call on hold
|
|----
|User Hold Retrieve - Retrieve call on hold
|
|----
|User Transfer - Transfer with Consult
|
|----
|User Transfer - Transfer with Consult (Alerting only)
|
|----
|User Transfer - Blind Transfer
|
|----
|3PTY - Make 3rd Party Call
|
|----
|Connected Number Update on Display
|
|}

===UC Features===

{| border="1"
!Tested feature
!Result
|----
|Video calls possible?
|
|----
|Video conference possible? (max. amount of participants)
|
|----
|Video Codecs
|
|----
|enable/disable video during call
|
|----
|Set own presence possible?
|
|----
|See presence of others possible?
|
|----
|chat with mypbx client possible?
|
|----
|chat with same vendor client possible?
|
|----
|send IM - messages to phones possible?
|
|}

== Configuration ==

=== innovaphone configuration ===

=== 3rd party product configuration ===

User talk:2ntestteam

2017-02-06T10:33:26Z

2ntestteam: /* Directory */

==Summary==
The Helios IP - doorphone supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F|recommended product]].

The video functionality of the doorphone was also tested. With the current V6 SR2 firmware only basic video calls are possible. For more information on this topic and other minor problems, please refer to: [[Howto:2N_Helios_IP_-_2N_-_SIP_Testreport#Known_Problems|Known Problems]]

The 2N support team was very fast and made an overall good impression.

The Helios IP - doorphone was retested by its manufacturer 2N in November 2010 using actualized firmware and hardware. The test were completed successfully, no problems were found. For a detailed view of this report, please have a look at [[Howto:2N_Helios_IP_-_2N_-_vendor_Testreport]]

==Certification Status==

{{Template:Compat Status "tested"}}





Testing of this product has been finalized January 16th, 2017.

==Version==
Firmware Version:
2.18.0.27.5

Hardware Version:
570v5

innovaphone Firmware:
11r2 sr22 IPVA[11.3648]

==Device Setup==

{| border="1"
!Tested feature
!Result
|----
|Register Device w/o specific configuration (requires DHCP)
|no
|----
|DHCP is default
|yes
|----
|DHCP yields timeserver and time displays correctly
|no
|----
|SNTP config has TZ string for timezone/dst autoconfig
|no
|----
|DHCP yields correct default gateway
|yes
|----
|Device supports magic registration (e.g. by serial)
|no
|----
|Fixed registrations works
|yes
|----
|Device registers w/o Extension (just by name)
|no
|----
|Device registers by name with non-latin1 characters (e.g. UserÄÖÜ)
|no
|----
|Device registers by extension
|yes
|----
|Device registers with password
|yes
|----
|Device registers multiple identities
|yes
|----
|2nd GK is supported (mit SIP??)
|no
|----
|Changing registrations between GK1 and GK2 (mit SIP??)
|no
|----
|PBX redirect (UserObject on Master/Phone at Slave registered)
|yes
|----
|Physical Location (@PBX) correct?
|yes
|----
|Device supports STUN protocol
|no
|----
|Device sends NAT - keepalive messages
|yes
|----
|Device usable in [[Howto:Hosting | hosting]] scenarios?
|yes
|----
|Device refreshes the PBX registration
|yes
|----
|Device supports SIP over TCP
|yes
|----
|Device supports SRTP
|no
|----
|Device supports SIPS (SIP over TLS)
|no
|----
|Device supports HTTPS
|yes
|----
|Device supports VAD (Voice activity detection)
|no
|----
|Device supports Auto-Answer (needed when used with CTI client)
|yes
|----
|Supported menu languages
|yes
|}

==Test Results==

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|call using g711a
|yes
|----
|call using g711u
|yes
|----
|call using g729
|yes
|----
|call using g722
|yes
|----
|Overlapped sending
|no
|----
|Device sets up an early media channel for incoming calls
|no
|----
|Device sets up an early media channel for outgoing calls
|no
|----
|Device shows called id number
|no
|----
|Device shows called id name
|no
|----
|Device shows called id display info
|no
|----
|Fax using T.38
|no
|----
|CGPN can be suppressed
|no
|----
|Reverse Media Negotiation
|yes
|----
|Device shows CDPN/CGPN on incoming call
|yes
|----
|Device shows CDPN/CGPN on outgoing call
|yes
|----
|Device shows connected number
|no
|----
|Device shows diverting number
|no
|----
|Device supports distinctive ringing
|yes
|----
|Device supports asymetric codec negotiation
|no
|----
|Device supports codec renegotiation during a conversation
|yes
|----
|Device shows correct display message in case of busy CDPN
|no
|----
|Device shows correct display message in case of not existing CDPN
|no
|----
|Device shows correct display message in case that the call is declined
|no
|----
|3party conference possible
|no
|----
|Device supports display updates during call(needed for Directory Search object)
|no
|----
|Long Time Call (>30 min) works?
|yes
|----
|Registration redirecting works?
|no
|----
|Incoming SRTP call - SRTP not enabled on DUT
|no
|----
|Incoming SRTP call - SRTP enabled on DUT
|no
|----
|Voice Quality OK?
|yes
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|DTMF tones sent correctly
|yes
|----
|DTMF tones received correctly
|yes
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|Device handles incoming hold correctly
|yes
|----
|Device can put a call on hold using correctly(inactive or sendonly)
|no
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|N/A
|----
||inno1 calls inno2. inno1 transfers to testphone.
|N/A
|N/A
|----
|inno1 calls testphone. inno1 transfers to inno2.
|N/A
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|}

=== Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|testphone makes call to a Broadcast Group. inno1 picks up.
|yes
|----
|inno1 makes call to a Broadcast Group. testphone picks up.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
|yes
|----
|inno1 makes call to a Waiting Queue. testphone picks up.
|yes
|}

=== DTMF Features ===

{| border="1"
!Tested feature
!Result
|----
|CFU Activate/Deactivate
|no
|----
|CFB Activate/Deactivate
|no
|----
|CFNR Activate/Deactivate
|no
|----
|Pickup Group
|no
|----
|Pickup Directed
|no
|----
|Park/Unpark
|no
|----
|Park To/Unpark From
|no
|----
|Call Completion Busy
|no
|----
|Call Completion Cancel
|no
|----
|Join Group/Leave Group
|no
|----
|Join All Groups/Leave All Groups
|no
|----
|Enable mobility/Disable mobility
|no
|----
|Enable mobility cw/Disable mobility cw
|no
|----
|Set presence
|no
|}

==Other Features==

===Directory===

{| border="1"
!Tested feature
!Result
|----
|Device built-in directory
|yes
|----
|Exists
|yes
|----
|Can be dialled from
|yes
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|yes
|}

{| border="1"
!Tested feature
!Result
|----
|External LDAP Server supported
|no
|----
|Can be dialled from
|no
|----
|Does CLI resolution
|no
|----
|display update if directory object is used?
|no
|}

===Keys===

{| border="1"
!Tested feature
!Result
|----
|Device has speed dial keys
|
|----
|Device has programmable function keys
|
|----
|Device has partner keys
|
|}

===CTI Features (with SOAP / TAPI / myPBX) ===

{| border="1"
!Tested feature
!Result
|----
|User Call - outgoing call
|
|----
|User Connect - Answer incoming call
|
|----
|User Reject - Reject alerting call
|
|----
|User Disconnect - Disconnect active call
|
|----
|User Hold - Put connected call on hold
|
|----
|User Hold Retrieve - Retrieve call on hold
|
|----
|User Transfer - Transfer with Consult
|
|----
|User Transfer - Transfer with Consult (Alerting only)
|
|----
|User Transfer - Blind Transfer
|
|----
|3PTY - Make 3rd Party Call
|
|----
|Connected Number Update on Display
|
|}

===UC Features===

{| border="1"
!Tested feature
!Result
|----
|Video calls possible?
|
|----
|Video conference possible? (max. amount of participants)
|
|----
|Video Codecs
|
|----
|enable/disable video during call
|
|----
|Set own presence possible?
|
|----
|See presence of others possible?
|
|----
|chat with mypbx client possible?
|
|----
|chat with same vendor client possible?
|
|----
|send IM - messages to phones possible?
|
|}

== Configuration ==

=== innovaphone configuration ===

=== 3rd party product configuration ===

User talk:2ntestteam

2017-02-06T09:29:25Z

2ntestteam: /* DTMF Features */

==Summary==
The Helios IP - doorphone supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F|recommended product]].

The video functionality of the doorphone was also tested. With the current V6 SR2 firmware only basic video calls are possible. For more information on this topic and other minor problems, please refer to: [[Howto:2N_Helios_IP_-_2N_-_SIP_Testreport#Known_Problems|Known Problems]]

The 2N support team was very fast and made an overall good impression.

The Helios IP - doorphone was retested by its manufacturer 2N in November 2010 using actualized firmware and hardware. The test were completed successfully, no problems were found. For a detailed view of this report, please have a look at [[Howto:2N_Helios_IP_-_2N_-_vendor_Testreport]]

==Certification Status==

{{Template:Compat Status "tested"}}





Testing of this product has been finalized January 16th, 2017.

==Version==
Firmware Version:
2.18.0.27.5

Hardware Version:
570v5

innovaphone Firmware:
11r2 sr22 IPVA[11.3648]

==Device Setup==

{| border="1"
!Tested feature
!Result
|----
|Register Device w/o specific configuration (requires DHCP)
|no
|----
|DHCP is default
|yes
|----
|DHCP yields timeserver and time displays correctly
|no
|----
|SNTP config has TZ string for timezone/dst autoconfig
|no
|----
|DHCP yields correct default gateway
|yes
|----
|Device supports magic registration (e.g. by serial)
|no
|----
|Fixed registrations works
|yes
|----
|Device registers w/o Extension (just by name)
|no
|----
|Device registers by name with non-latin1 characters (e.g. UserÄÖÜ)
|no
|----
|Device registers by extension
|yes
|----
|Device registers with password
|yes
|----
|Device registers multiple identities
|yes
|----
|2nd GK is supported (mit SIP??)
|no
|----
|Changing registrations between GK1 and GK2 (mit SIP??)
|no
|----
|PBX redirect (UserObject on Master/Phone at Slave registered)
|yes
|----
|Physical Location (@PBX) correct?
|yes
|----
|Device supports STUN protocol
|no
|----
|Device sends NAT - keepalive messages
|yes
|----
|Device usable in [[Howto:Hosting | hosting]] scenarios?
|yes
|----
|Device refreshes the PBX registration
|yes
|----
|Device supports SIP over TCP
|yes
|----
|Device supports SRTP
|no
|----
|Device supports SIPS (SIP over TLS)
|no
|----
|Device supports HTTPS
|yes
|----
|Device supports VAD (Voice activity detection)
|no
|----
|Device supports Auto-Answer (needed when used with CTI client)
|yes
|----
|Supported menu languages
|yes
|}

==Test Results==

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|call using g711a
|yes
|----
|call using g711u
|yes
|----
|call using g729
|yes
|----
|call using g722
|yes
|----
|Overlapped sending
|no
|----
|Device sets up an early media channel for incoming calls
|no
|----
|Device sets up an early media channel for outgoing calls
|no
|----
|Device shows called id number
|no
|----
|Device shows called id name
|no
|----
|Device shows called id display info
|no
|----
|Fax using T.38
|no
|----
|CGPN can be suppressed
|no
|----
|Reverse Media Negotiation
|yes
|----
|Device shows CDPN/CGPN on incoming call
|yes
|----
|Device shows CDPN/CGPN on outgoing call
|yes
|----
|Device shows connected number
|no
|----
|Device shows diverting number
|no
|----
|Device supports distinctive ringing
|yes
|----
|Device supports asymetric codec negotiation
|no
|----
|Device supports codec renegotiation during a conversation
|yes
|----
|Device shows correct display message in case of busy CDPN
|no
|----
|Device shows correct display message in case of not existing CDPN
|no
|----
|Device shows correct display message in case that the call is declined
|no
|----
|3party conference possible
|no
|----
|Device supports display updates during call(needed for Directory Search object)
|no
|----
|Long Time Call (>30 min) works?
|yes
|----
|Registration redirecting works?
|no
|----
|Incoming SRTP call - SRTP not enabled on DUT
|no
|----
|Incoming SRTP call - SRTP enabled on DUT
|no
|----
|Voice Quality OK?
|yes
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|DTMF tones sent correctly
|yes
|----
|DTMF tones received correctly
|yes
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|Device handles incoming hold correctly
|yes
|----
|Device can put a call on hold using correctly(inactive or sendonly)
|no
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|N/A
|----
||inno1 calls inno2. inno1 transfers to testphone.
|N/A
|N/A
|----
|inno1 calls testphone. inno1 transfers to inno2.
|N/A
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|}

=== Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|testphone makes call to a Broadcast Group. inno1 picks up.
|yes
|----
|inno1 makes call to a Broadcast Group. testphone picks up.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
|yes
|----
|inno1 makes call to a Waiting Queue. testphone picks up.
|yes
|}

=== DTMF Features ===

{| border="1"
!Tested feature
!Result
|----
|CFU Activate/Deactivate
|no
|----
|CFB Activate/Deactivate
|no
|----
|CFNR Activate/Deactivate
|no
|----
|Pickup Group
|no
|----
|Pickup Directed
|no
|----
|Park/Unpark
|no
|----
|Park To/Unpark From
|no
|----
|Call Completion Busy
|no
|----
|Call Completion Cancel
|no
|----
|Join Group/Leave Group
|no
|----
|Join All Groups/Leave All Groups
|no
|----
|Enable mobility/Disable mobility
|no
|----
|Enable mobility cw/Disable mobility cw
|no
|----
|Set presence
|no
|}

==Other Features==

===Directory===

{| border="1"
!Tested feature
!Result
|----
|Device built-in directory
|----
|Exists
|
|----
|Can be dialled from
|
|----
|Does CLI resolution
|
|----
|display update if directory object is used?
|
|}

{| border="1"
!Tested feature
!Result
|----
|External LDAP Server supported
|
|----
|Can be dialled from
|
|----
|Does CLI resolution
|
|----
|display update if directory object is used?
|
|}

===Keys===

{| border="1"
!Tested feature
!Result
|----
|Device has speed dial keys
|
|----
|Device has programmable function keys
|
|----
|Device has partner keys
|
|}

===CTI Features (with SOAP / TAPI / myPBX) ===

{| border="1"
!Tested feature
!Result
|----
|User Call - outgoing call
|
|----
|User Connect - Answer incoming call
|
|----
|User Reject - Reject alerting call
|
|----
|User Disconnect - Disconnect active call
|
|----
|User Hold - Put connected call on hold
|
|----
|User Hold Retrieve - Retrieve call on hold
|
|----
|User Transfer - Transfer with Consult
|
|----
|User Transfer - Transfer with Consult (Alerting only)
|
|----
|User Transfer - Blind Transfer
|
|----
|3PTY - Make 3rd Party Call
|
|----
|Connected Number Update on Display
|
|}

===UC Features===

{| border="1"
!Tested feature
!Result
|----
|Video calls possible?
|
|----
|Video conference possible? (max. amount of participants)
|
|----
|Video Codecs
|
|----
|enable/disable video during call
|
|----
|Set own presence possible?
|
|----
|See presence of others possible?
|
|----
|chat with mypbx client possible?
|
|----
|chat with same vendor client possible?
|
|----
|send IM - messages to phones possible?
|
|}

== Configuration ==

=== innovaphone configuration ===

=== 3rd party product configuration ===

User talk:2ntestteam

2017-02-06T09:28:57Z

2ntestteam: /* Broadcast Group & Waiting Queue */

==Summary==
The Helios IP - doorphone supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F|recommended product]].

The video functionality of the doorphone was also tested. With the current V6 SR2 firmware only basic video calls are possible. For more information on this topic and other minor problems, please refer to: [[Howto:2N_Helios_IP_-_2N_-_SIP_Testreport#Known_Problems|Known Problems]]

The 2N support team was very fast and made an overall good impression.

The Helios IP - doorphone was retested by its manufacturer 2N in November 2010 using actualized firmware and hardware. The test were completed successfully, no problems were found. For a detailed view of this report, please have a look at [[Howto:2N_Helios_IP_-_2N_-_vendor_Testreport]]

==Certification Status==

{{Template:Compat Status "tested"}}





Testing of this product has been finalized January 16th, 2017.

==Version==
Firmware Version:
2.18.0.27.5

Hardware Version:
570v5

innovaphone Firmware:
11r2 sr22 IPVA[11.3648]

==Device Setup==

{| border="1"
!Tested feature
!Result
|----
|Register Device w/o specific configuration (requires DHCP)
|no
|----
|DHCP is default
|yes
|----
|DHCP yields timeserver and time displays correctly
|no
|----
|SNTP config has TZ string for timezone/dst autoconfig
|no
|----
|DHCP yields correct default gateway
|yes
|----
|Device supports magic registration (e.g. by serial)
|no
|----
|Fixed registrations works
|yes
|----
|Device registers w/o Extension (just by name)
|no
|----
|Device registers by name with non-latin1 characters (e.g. UserÄÖÜ)
|no
|----
|Device registers by extension
|yes
|----
|Device registers with password
|yes
|----
|Device registers multiple identities
|yes
|----
|2nd GK is supported (mit SIP??)
|no
|----
|Changing registrations between GK1 and GK2 (mit SIP??)
|no
|----
|PBX redirect (UserObject on Master/Phone at Slave registered)
|yes
|----
|Physical Location (@PBX) correct?
|yes
|----
|Device supports STUN protocol
|no
|----
|Device sends NAT - keepalive messages
|yes
|----
|Device usable in [[Howto:Hosting | hosting]] scenarios?
|yes
|----
|Device refreshes the PBX registration
|yes
|----
|Device supports SIP over TCP
|yes
|----
|Device supports SRTP
|no
|----
|Device supports SIPS (SIP over TLS)
|no
|----
|Device supports HTTPS
|yes
|----
|Device supports VAD (Voice activity detection)
|no
|----
|Device supports Auto-Answer (needed when used with CTI client)
|yes
|----
|Supported menu languages
|yes
|}

==Test Results==

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|call using g711a
|yes
|----
|call using g711u
|yes
|----
|call using g729
|yes
|----
|call using g722
|yes
|----
|Overlapped sending
|no
|----
|Device sets up an early media channel for incoming calls
|no
|----
|Device sets up an early media channel for outgoing calls
|no
|----
|Device shows called id number
|no
|----
|Device shows called id name
|no
|----
|Device shows called id display info
|no
|----
|Fax using T.38
|no
|----
|CGPN can be suppressed
|no
|----
|Reverse Media Negotiation
|yes
|----
|Device shows CDPN/CGPN on incoming call
|yes
|----
|Device shows CDPN/CGPN on outgoing call
|yes
|----
|Device shows connected number
|no
|----
|Device shows diverting number
|no
|----
|Device supports distinctive ringing
|yes
|----
|Device supports asymetric codec negotiation
|no
|----
|Device supports codec renegotiation during a conversation
|yes
|----
|Device shows correct display message in case of busy CDPN
|no
|----
|Device shows correct display message in case of not existing CDPN
|no
|----
|Device shows correct display message in case that the call is declined
|no
|----
|3party conference possible
|no
|----
|Device supports display updates during call(needed for Directory Search object)
|no
|----
|Long Time Call (>30 min) works?
|yes
|----
|Registration redirecting works?
|no
|----
|Incoming SRTP call - SRTP not enabled on DUT
|no
|----
|Incoming SRTP call - SRTP enabled on DUT
|no
|----
|Voice Quality OK?
|yes
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|DTMF tones sent correctly
|yes
|----
|DTMF tones received correctly
|yes
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|Device handles incoming hold correctly
|yes
|----
|Device can put a call on hold using correctly(inactive or sendonly)
|no
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|N/A
|----
||inno1 calls inno2. inno1 transfers to testphone.
|N/A
|N/A
|----
|inno1 calls testphone. inno1 transfers to inno2.
|N/A
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|}

=== Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|testphone makes call to a Broadcast Group. inno1 picks up.
|yes
|----
|inno1 makes call to a Broadcast Group. testphone picks up.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
|yes
|----
|testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
|yes
|----
|inno1 makes call to a Waiting Queue. testphone picks up.
|yes
|}

=== DTMF Features ===

{| border="1"
!Tested feature
!Result
|----
|CFU Activate/Deactivate
|
|----
|CFB Activate/Deactivate
|
|----
|CFNR Activate/Deactivate
|
|----
|Pickup Group
|
|----
|Pickup Directed
|
|----
|Park/Unpark
|
|----
|Park To/Unpark From
|
|----
|Call Completion Busy
|
|----
|Call Completion Cancel
|
|----
|Join Group/Leave Group
|
|----
|Join All Groups/Leave All Groups
|
|----
|Enable mobility/Disable mobility
|
|----
|Enable mobility cw/Disable mobility cw
|
|----
|Set presence
|
|}

==Other Features==

===Directory===

{| border="1"
!Tested feature
!Result
|----
|Device built-in directory
|----
|Exists
|
|----
|Can be dialled from
|
|----
|Does CLI resolution
|
|----
|display update if directory object is used?
|
|}

{| border="1"
!Tested feature
!Result
|----
|External LDAP Server supported
|
|----
|Can be dialled from
|
|----
|Does CLI resolution
|
|----
|display update if directory object is used?
|
|}

===Keys===

{| border="1"
!Tested feature
!Result
|----
|Device has speed dial keys
|
|----
|Device has programmable function keys
|
|----
|Device has partner keys
|
|}

===CTI Features (with SOAP / TAPI / myPBX) ===

{| border="1"
!Tested feature
!Result
|----
|User Call - outgoing call
|
|----
|User Connect - Answer incoming call
|
|----
|User Reject - Reject alerting call
|
|----
|User Disconnect - Disconnect active call
|
|----
|User Hold - Put connected call on hold
|
|----
|User Hold Retrieve - Retrieve call on hold
|
|----
|User Transfer - Transfer with Consult
|
|----
|User Transfer - Transfer with Consult (Alerting only)
|
|----
|User Transfer - Blind Transfer
|
|----
|3PTY - Make 3rd Party Call
|
|----
|Connected Number Update on Display
|
|}

===UC Features===

{| border="1"
!Tested feature
!Result
|----
|Video calls possible?
|
|----
|Video conference possible? (max. amount of participants)
|
|----
|Video Codecs
|
|----
|enable/disable video during call
|
|----
|Set own presence possible?
|
|----
|See presence of others possible?
|
|----
|chat with mypbx client possible?
|
|----
|chat with same vendor client possible?
|
|----
|send IM - messages to phones possible?
|
|}

== Configuration ==

=== innovaphone configuration ===

=== 3rd party product configuration ===

User talk:2ntestteam

2017-02-06T09:28:38Z

2ntestteam: /* Blind Transfer (alerting only) */

==Summary==
The Helios IP - doorphone supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F|recommended product]].

The video functionality of the doorphone was also tested. With the current V6 SR2 firmware only basic video calls are possible. For more information on this topic and other minor problems, please refer to: [[Howto:2N_Helios_IP_-_2N_-_SIP_Testreport#Known_Problems|Known Problems]]

The 2N support team was very fast and made an overall good impression.

The Helios IP - doorphone was retested by its manufacturer 2N in November 2010 using actualized firmware and hardware. The test were completed successfully, no problems were found. For a detailed view of this report, please have a look at [[Howto:2N_Helios_IP_-_2N_-_vendor_Testreport]]

==Certification Status==

{{Template:Compat Status "tested"}}





Testing of this product has been finalized January 16th, 2017.

==Version==
Firmware Version:
2.18.0.27.5

Hardware Version:
570v5

innovaphone Firmware:
11r2 sr22 IPVA[11.3648]

==Device Setup==

{| border="1"
!Tested feature
!Result
|----
|Register Device w/o specific configuration (requires DHCP)
|no
|----
|DHCP is default
|yes
|----
|DHCP yields timeserver and time displays correctly
|no
|----
|SNTP config has TZ string for timezone/dst autoconfig
|no
|----
|DHCP yields correct default gateway
|yes
|----
|Device supports magic registration (e.g. by serial)
|no
|----
|Fixed registrations works
|yes
|----
|Device registers w/o Extension (just by name)
|no
|----
|Device registers by name with non-latin1 characters (e.g. UserÄÖÜ)
|no
|----
|Device registers by extension
|yes
|----
|Device registers with password
|yes
|----
|Device registers multiple identities
|yes
|----
|2nd GK is supported (mit SIP??)
|no
|----
|Changing registrations between GK1 and GK2 (mit SIP??)
|no
|----
|PBX redirect (UserObject on Master/Phone at Slave registered)
|yes
|----
|Physical Location (@PBX) correct?
|yes
|----
|Device supports STUN protocol
|no
|----
|Device sends NAT - keepalive messages
|yes
|----
|Device usable in [[Howto:Hosting | hosting]] scenarios?
|yes
|----
|Device refreshes the PBX registration
|yes
|----
|Device supports SIP over TCP
|yes
|----
|Device supports SRTP
|no
|----
|Device supports SIPS (SIP over TLS)
|no
|----
|Device supports HTTPS
|yes
|----
|Device supports VAD (Voice activity detection)
|no
|----
|Device supports Auto-Answer (needed when used with CTI client)
|yes
|----
|Supported menu languages
|yes
|}

==Test Results==

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|call using g711a
|yes
|----
|call using g711u
|yes
|----
|call using g729
|yes
|----
|call using g722
|yes
|----
|Overlapped sending
|no
|----
|Device sets up an early media channel for incoming calls
|no
|----
|Device sets up an early media channel for outgoing calls
|no
|----
|Device shows called id number
|no
|----
|Device shows called id name
|no
|----
|Device shows called id display info
|no
|----
|Fax using T.38
|no
|----
|CGPN can be suppressed
|no
|----
|Reverse Media Negotiation
|yes
|----
|Device shows CDPN/CGPN on incoming call
|yes
|----
|Device shows CDPN/CGPN on outgoing call
|yes
|----
|Device shows connected number
|no
|----
|Device shows diverting number
|no
|----
|Device supports distinctive ringing
|yes
|----
|Device supports asymetric codec negotiation
|no
|----
|Device supports codec renegotiation during a conversation
|yes
|----
|Device shows correct display message in case of busy CDPN
|no
|----
|Device shows correct display message in case of not existing CDPN
|no
|----
|Device shows correct display message in case that the call is declined
|no
|----
|3party conference possible
|no
|----
|Device supports display updates during call(needed for Directory Search object)
|no
|----
|Long Time Call (>30 min) works?
|yes
|----
|Registration redirecting works?
|no
|----
|Incoming SRTP call - SRTP not enabled on DUT
|no
|----
|Incoming SRTP call - SRTP enabled on DUT
|no
|----
|Voice Quality OK?
|yes
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|DTMF tones sent correctly
|yes
|----
|DTMF tones received correctly
|yes
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|Device handles incoming hold correctly
|yes
|----
|Device can put a call on hold using correctly(inactive or sendonly)
|no
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|N/A
|----
||inno1 calls inno2. inno1 transfers to testphone.
|N/A
|N/A
|----
|inno1 calls testphone. inno1 transfers to inno2.
|N/A
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|}

=== Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|testphone makes call to a Broadcast Group. inno1 picks up.
|
|----
|inno1 makes call to a Broadcast Group. testphone picks up.
|
|----
|testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
|
|----
|testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
|
|----
|inno1 makes call to a Waiting Queue. testphone picks up.
|
|}

=== DTMF Features ===

{| border="1"
!Tested feature
!Result
|----
|CFU Activate/Deactivate
|
|----
|CFB Activate/Deactivate
|
|----
|CFNR Activate/Deactivate
|
|----
|Pickup Group
|
|----
|Pickup Directed
|
|----
|Park/Unpark
|
|----
|Park To/Unpark From
|
|----
|Call Completion Busy
|
|----
|Call Completion Cancel
|
|----
|Join Group/Leave Group
|
|----
|Join All Groups/Leave All Groups
|
|----
|Enable mobility/Disable mobility
|
|----
|Enable mobility cw/Disable mobility cw
|
|----
|Set presence
|
|}

==Other Features==

===Directory===

{| border="1"
!Tested feature
!Result
|----
|Device built-in directory
|----
|Exists
|
|----
|Can be dialled from
|
|----
|Does CLI resolution
|
|----
|display update if directory object is used?
|
|}

{| border="1"
!Tested feature
!Result
|----
|External LDAP Server supported
|
|----
|Can be dialled from
|
|----
|Does CLI resolution
|
|----
|display update if directory object is used?
|
|}

===Keys===

{| border="1"
!Tested feature
!Result
|----
|Device has speed dial keys
|
|----
|Device has programmable function keys
|
|----
|Device has partner keys
|
|}

===CTI Features (with SOAP / TAPI / myPBX) ===

{| border="1"
!Tested feature
!Result
|----
|User Call - outgoing call
|
|----
|User Connect - Answer incoming call
|
|----
|User Reject - Reject alerting call
|
|----
|User Disconnect - Disconnect active call
|
|----
|User Hold - Put connected call on hold
|
|----
|User Hold Retrieve - Retrieve call on hold
|
|----
|User Transfer - Transfer with Consult
|
|----
|User Transfer - Transfer with Consult (Alerting only)
|
|----
|User Transfer - Blind Transfer
|
|----
|3PTY - Make 3rd Party Call
|
|----
|Connected Number Update on Display
|
|}

===UC Features===

{| border="1"
!Tested feature
!Result
|----
|Video calls possible?
|
|----
|Video conference possible? (max. amount of participants)
|
|----
|Video Codecs
|
|----
|enable/disable video during call
|
|----
|Set own presence possible?
|
|----
|See presence of others possible?
|
|----
|chat with mypbx client possible?
|
|----
|chat with same vendor client possible?
|
|----
|send IM - messages to phones possible?
|
|}

== Configuration ==

=== innovaphone configuration ===

=== 3rd party product configuration ===

User talk:2ntestteam

2017-02-06T09:28:29Z

2ntestteam: /* Blind Transfer */

==Summary==
The Helios IP - doorphone supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F|recommended product]].

The video functionality of the doorphone was also tested. With the current V6 SR2 firmware only basic video calls are possible. For more information on this topic and other minor problems, please refer to: [[Howto:2N_Helios_IP_-_2N_-_SIP_Testreport#Known_Problems|Known Problems]]

The 2N support team was very fast and made an overall good impression.

The Helios IP - doorphone was retested by its manufacturer 2N in November 2010 using actualized firmware and hardware. The test were completed successfully, no problems were found. For a detailed view of this report, please have a look at [[Howto:2N_Helios_IP_-_2N_-_vendor_Testreport]]

==Certification Status==

{{Template:Compat Status "tested"}}





Testing of this product has been finalized January 16th, 2017.

==Version==
Firmware Version:
2.18.0.27.5

Hardware Version:
570v5

innovaphone Firmware:
11r2 sr22 IPVA[11.3648]

==Device Setup==

{| border="1"
!Tested feature
!Result
|----
|Register Device w/o specific configuration (requires DHCP)
|no
|----
|DHCP is default
|yes
|----
|DHCP yields timeserver and time displays correctly
|no
|----
|SNTP config has TZ string for timezone/dst autoconfig
|no
|----
|DHCP yields correct default gateway
|yes
|----
|Device supports magic registration (e.g. by serial)
|no
|----
|Fixed registrations works
|yes
|----
|Device registers w/o Extension (just by name)
|no
|----
|Device registers by name with non-latin1 characters (e.g. UserÄÖÜ)
|no
|----
|Device registers by extension
|yes
|----
|Device registers with password
|yes
|----
|Device registers multiple identities
|yes
|----
|2nd GK is supported (mit SIP??)
|no
|----
|Changing registrations between GK1 and GK2 (mit SIP??)
|no
|----
|PBX redirect (UserObject on Master/Phone at Slave registered)
|yes
|----
|Physical Location (@PBX) correct?
|yes
|----
|Device supports STUN protocol
|no
|----
|Device sends NAT - keepalive messages
|yes
|----
|Device usable in [[Howto:Hosting | hosting]] scenarios?
|yes
|----
|Device refreshes the PBX registration
|yes
|----
|Device supports SIP over TCP
|yes
|----
|Device supports SRTP
|no
|----
|Device supports SIPS (SIP over TLS)
|no
|----
|Device supports HTTPS
|yes
|----
|Device supports VAD (Voice activity detection)
|no
|----
|Device supports Auto-Answer (needed when used with CTI client)
|yes
|----
|Supported menu languages
|yes
|}

==Test Results==

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|call using g711a
|yes
|----
|call using g711u
|yes
|----
|call using g729
|yes
|----
|call using g722
|yes
|----
|Overlapped sending
|no
|----
|Device sets up an early media channel for incoming calls
|no
|----
|Device sets up an early media channel for outgoing calls
|no
|----
|Device shows called id number
|no
|----
|Device shows called id name
|no
|----
|Device shows called id display info
|no
|----
|Fax using T.38
|no
|----
|CGPN can be suppressed
|no
|----
|Reverse Media Negotiation
|yes
|----
|Device shows CDPN/CGPN on incoming call
|yes
|----
|Device shows CDPN/CGPN on outgoing call
|yes
|----
|Device shows connected number
|no
|----
|Device shows diverting number
|no
|----
|Device supports distinctive ringing
|yes
|----
|Device supports asymetric codec negotiation
|no
|----
|Device supports codec renegotiation during a conversation
|yes
|----
|Device shows correct display message in case of busy CDPN
|no
|----
|Device shows correct display message in case of not existing CDPN
|no
|----
|Device shows correct display message in case that the call is declined
|no
|----
|3party conference possible
|no
|----
|Device supports display updates during call(needed for Directory Search object)
|no
|----
|Long Time Call (>30 min) works?
|yes
|----
|Registration redirecting works?
|no
|----
|Incoming SRTP call - SRTP not enabled on DUT
|no
|----
|Incoming SRTP call - SRTP enabled on DUT
|no
|----
|Voice Quality OK?
|yes
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|DTMF tones sent correctly
|yes
|----
|DTMF tones received correctly
|yes
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|Device handles incoming hold correctly
|yes
|----
|Device can put a call on hold using correctly(inactive or sendonly)
|no
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|N/A
|N/A
|----
||inno1 calls inno2. inno1 transfers to testphone.
|N/A
|N/A
|----
|inno1 calls testphone. inno1 transfers to inno2.
|N/A
|N/A
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|N/A
|N/A
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|N/A
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|yes
|----
||inno1 calls inno2. inno1 transfers to testphone.
|yes
|----
|inno1 calls testphone. inno1 transfers to inno2.
|yes
|----
|inno1 calls testphone. testphone transfers to inno2.
|N/A
|----
|testphone calls inno1. inno1 transfers to inno2.
|yes
|----
|testphone calls inno1. testphone transfers to inno2.
|N/A
|}

=== Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to testphone.
|
|----
|inno1 calls testphone. testphone transfers to inno2.
|
|----
|testphone calls inno1. inno1 transfers to inno2.
|
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|testphone makes call to a Broadcast Group. inno1 picks up.
|
|----
|inno1 makes call to a Broadcast Group. testphone picks up.
|
|----
|testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
|
|----
|testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
|
|----
|inno1 makes call to a Waiting Queue. testphone picks up.
|
|}

=== DTMF Features ===

{| border="1"
!Tested feature
!Result
|----
|CFU Activate/Deactivate
|
|----
|CFB Activate/Deactivate
|
|----
|CFNR Activate/Deactivate
|
|----
|Pickup Group
|
|----
|Pickup Directed
|
|----
|Park/Unpark
|
|----
|Park To/Unpark From
|
|----
|Call Completion Busy
|
|----
|Call Completion Cancel
|
|----
|Join Group/Leave Group
|
|----
|Join All Groups/Leave All Groups
|
|----
|Enable mobility/Disable mobility
|
|----
|Enable mobility cw/Disable mobility cw
|
|----
|Set presence
|
|}

==Other Features==

===Directory===

{| border="1"
!Tested feature
!Result
|----
|Device built-in directory
|----
|Exists
|
|----
|Can be dialled from
|
|----
|Does CLI resolution
|
|----
|display update if directory object is used?
|
|}

{| border="1"
!Tested feature
!Result
|----
|External LDAP Server supported
|
|----
|Can be dialled from
|
|----
|Does CLI resolution
|
|----
|display update if directory object is used?
|
|}

===Keys===

{| border="1"
!Tested feature
!Result
|----
|Device has speed dial keys
|
|----
|Device has programmable function keys
|
|----
|Device has partner keys
|
|}

===CTI Features (with SOAP / TAPI / myPBX) ===

{| border="1"
!Tested feature
!Result
|----
|User Call - outgoing call
|
|----
|User Connect - Answer incoming call
|
|----
|User Reject - Reject alerting call
|
|----
|User Disconnect - Disconnect active call
|
|----
|User Hold - Put connected call on hold
|
|----
|User Hold Retrieve - Retrieve call on hold
|
|----
|User Transfer - Transfer with Consult
|
|----
|User Transfer - Transfer with Consult (Alerting only)
|
|----
|User Transfer - Blind Transfer
|
|----
|3PTY - Make 3rd Party Call
|
|----
|Connected Number Update on Display
|
|}

===UC Features===

{| border="1"
!Tested feature
!Result
|----
|Video calls possible?
|
|----
|Video conference possible? (max. amount of participants)
|
|----
|Video Codecs
|
|----
|enable/disable video during call
|
|----
|Set own presence possible?
|
|----
|See presence of others possible?
|
|----
|chat with mypbx client possible?
|
|----
|chat with same vendor client possible?
|
|----
|send IM - messages to phones possible?
|
|}

== Configuration ==

=== innovaphone configuration ===

=== 3rd party product configuration ===