innovaphone wiki - User contributions [en]

Howto:Algo 8301 IP Paging Adapter - Algo - 3rd Party Product

2026-04-28T02:21:02Z

Algo: /* Device scope note */

[[Image:AlgosolutionsLogo.png|200px|right|/AlgosolutionsLogo.png|/AlgosolutionsLogo.png]]
==Product Name==
Algo [https://www.algosolutions.com/product/8301-ip-paging-adapter-scheduler/ 8301 IP Paging Adapter & Scheduler]

==Certification Status==


==Category==

[[Category:Referral Product|{{PAGENAME}}]]
{{Category:3rdParty_Terminal_Devices}}
[[Category:3rdParty Terminal Devices|{{PAGENAME}}]]

==Vendor==
'''Algo Communication Products Ltd.''' is a manufacturer of network-based IP endpoints for voice paging, emergency alerting, visual notification, intercom, and secure door entry applications. Algo products are designed for integration with unified communications, collaboration, and mass notification platforms. The company’s portfolio includes IP speakers, paging adapters, intercoms, visual alerters, display speakers, and endpoint management tools for commercial, education, healthcare, transportation, and industrial environments.

==Description==
The Algo 8301 IP Paging Adapter & Scheduler is a wideband SIP paging adapter designed to connect traditional analog amplifiers and legacy paging infrastructure to modern IP-based communication environments.

The 8301 emulates a page port similar to what is found on a legacy PBX or key system, allowing a traditional amplifier to be integrated into a VoIP or unified communications environment. This enables organizations to retain existing analog speaker infrastructure while adding SIP paging, multicast distribution, scheduled bells, automated announcements, emergency notifications, and other IP-based communication capabilities.

The device includes a balanced and isolated line output to reduce hum and noise when connected to an amplifier, and it also supports multicast audio transmission to additional Algo IP endpoints and compatible multicast-enabled phones. The 8301 is appropriate for education, retail, manufacturing, transportation, healthcare, and other environments where hybrid analog and IP paging is required.

==Functions==
The '''Algo 8301 IP Paging Adapter & Scheduler''' supports a range of functions for paging, alerting, scheduling, and hybrid analog/IP deployments.

Core functions include:
* SIP-based voice paging through registration as a 3rd-party SIP endpoint
* Integration of traditional analog amplifiers into IP and UC environments
* Scheduled bells, tones, and automated announcements synchronized to NTP
* Emergency, safety, security, and customer service audio notifications
* Multicast transmission to Algo IP speakers, paging adapters, display speakers, and compatible multicast-enabled phones
* Ring, page, and alert extension support
* Relay input and relay output support for connected accessories and external triggers
* Music input and background audio distribution
* Web interface configuration and centralized provisioning support

The 8301 can be deployed either as a SIP extension or as a multicast endpoint, depending on the communication design. In hybrid systems, it can provide local analog paging output while simultaneously distributing audio to IP endpoints over the network.

==innovaphone CTI ready==
n.a.

==innovaphone Reverse Proxy ready==
'''Yes.''' Testing was performed in an innovaphone myApps Cloud environment using registration via the cloud reverse proxy. In the innovaphone user object, the hardware ID must match the Authentication ID configured on the Algo device, and Reverse Proxy plus Media Relay must be enabled. The validated setup used STUN, while TURN and ICE were not used. SIP over TCP was validated. SIP over UDP and SIP over TLS were available but not fully validated in this test case.

* STUN yes
* TURN no
* ICE no
* SIP/TCP yes
* SIP UDP yes (not tested)
* SIP/TLS yes (not tested)

==innovaphone WebRTC ready==
n.a.

==Supported Codecs==

* G.722 yes
* G.711 A-law yes
* G.711 u-law yes

==DTMF Support==


* RTP DTMF (RFC2833)

==Supports RFC3261 Digest Authentication Scheme (Section 22.4)==



==Support LDAP Phonebook==
n.a.

==Version==
Product versions used for interop testing:

* Algo 8301 IP Paging Adapter & Scheduler
* Algo 8186 SIP Horn
* Algo 8180 SIP Audio Alerter (G2)
* Algo 8128 (G2) SIP Strobe Light
* Algo 8201 SIP PoE Intercom

* Algo firmware requirement: version 5.4 or later

* innovaphone firmware / software version: innovaphone myApps Cloud IPVA, V15r1sr11

These devices represent Algo IP speakers, paging adapters, visual alerters, and door phones, and similar registration steps apply across Algo SIP endpoints.

==Configuration==
Algo SIP endpoints can register to innovaphone as 3rd-party SIP endpoints for voice paging, loud ringing, emergency alerting, visual notification, and secure door entry.

Interoperability testing was conducted using the Algo 8301 IP Paging Adapter & Scheduler, 8186 SIP Horn, 8180 SIP Audio Alerter (G2), 8128 (G2) SIP Strobe Light, and 8201 SIP PoE Intercom. These represent Algo IP speakers, paging adapters, visual alerters, and door phones, and similar registration steps apply to all devices.

=== '''Algo firmware requirements''' ===
All Algo devices must be running firmware version 5.4 or later. The current firmware version can be verified on the device and can be updated in '''System -> Firmware''' tab.

==== '''Algo device configuration''' ====

# Log in to the Algo device web interface. The device's IP address can be found by using an IP scanner tool such as [https://angryip.org/ Angry IP Scanne]r which is free and open-source.
# Go to '''Basic Settings -> SIP'''.
## [[File:Algo SIP Settings.png|none|thumb|/Algo_SIP_Settings.png|/Algo_SIP_Settings.png]]
# Enter the SIP credentials under '''Base/Page''' using the values from innovaphone dashboard:
#* '''SIP Domain (Proxy Server):''' innovaphone System ID
#* '''SIP Extension:''' extension from innovaphone
#* '''Authentication ID:''' SIP username from innovaphone
#* '''Authentication Password:''' SIP password from innovaphone
# Select '''Save'''.
# Go to '''Advanced Settings -> Advanced SIP'''.
# Set '''SIP Transportation''' to '''TCP'''.
# Set the '''Outbound Proxy''' to the DNS name of the innovaphone system. Example: '''algosolutions-p.innovaphone.com'''
# Set '''SDP SRTP''' to '''Optional''' and '''AES CM 128 HMAC SHA1 80'''.
# Set '''STUN''' to '''stun.innovaphone.com'''.
# Select '''Save'''.
## [[File:AlgoSIPSettings2.png|none|thumb|/AlgoSIPSettings2.png|/AlgoSIPSettings2.png]]
#Go to the '''Status''' tab and verify that the configured extensions have registered correctly.
[[File:AlgoSIPConfirmation.png|none|thumb|/AlgoSIPConfirmation.png|473x473px|/AlgoSIPConfirmation.png]]

===== '''Configuration of the innovaphone user objects in innovaphone myApps''' =====

# Open the '''Users Admin App'''.
# [[File:UsersAdmin.png|thumb|none|/UsersAdmin.png|/UsersAdmin.png]]
# Create the user account for the Algo device. In this example we created a User account for Algo8180 and Algo8181.
# In the '''Devices''' table of the user account, make sure the '''hardware ID''' is the same as the '''Authentication ID''' used in the Algo device.
# Ensure that '''Reverse Proxy''' and '''Media Relay''' are enabled.
# [[File:Innovaphone Config Status.png|none|thumb|/Innovaphone_Config_Status.png|400x400px|/Innovaphone_Config_Status.png]]
# [[File:Status Confirmation.png|none|thumb|/Status_Confirmation.png|402x402px|/Status_Confirmation.png]]
# Or, if preferred, the configuration can also be completed using the Advanced GUI, as shown in the example below.
# [[File:Innovaphone Config Status2.png|none|thumb|/Innovaphone_Config_Status2.png|418x418px|/Innovaphone_Config_Status2.png]]
# Registration of the Algo device can then be checked within the innovaphone system.
# [[File:Innovaphone Config Status using GUI.png|none|thumb|/Innovaphone_Config_Status_using_GUI.png|400x400px|/Innovaphone_Config_Status_using_GUI.png]]
The same SIP registration workflow applies across Algo IP speakers, paging adapters, visual alerters, and intercoms. Device-specific behaviour and options depend on the endpoint and deployment.

==Summary==
Algo SIP endpoints can integrate with innovaphone as 3rd-party SIP endpoints across key endpoint categories, including paging adapters, IP speakers, visual alerters, and intercoms.

Interoperability in this validation scope was performed using the Algo 8301, 8186, 8180, 8128, and 8201. Similar SIP registration steps apply across these devices, with product-specific options such as analog paging output, multicast, visual alerting, door entry, or local audio behaviour configured according to the endpoint type.

==Contact==
{|
| Algo Communication Products Ltd.
|-
| Burnaby, BC, Canada
|-
| Tel: +1 604-454-3790
|-
| Support: +1 604-454-3792
|-
| Mail: [mailto:info@algosolutions.com info@algosolutions.com]
|}

For additional information please refer to [https://www.algosolutions.com/contact-us/ our contact page].

Howto:Algo 8301 IP Paging Adapter - Algo - 3rd Party Product

2026-04-28T02:17:14Z

Algo: /* Configuration */

[[Image:AlgosolutionsLogo.png|200px|right|/AlgosolutionsLogo.png|/AlgosolutionsLogo.png]]
==Product Name==
Algo [https://www.algosolutions.com/product/8301-ip-paging-adapter-scheduler/ 8301 IP Paging Adapter & Scheduler]

==Certification Status==


==Category==

[[Category:Referral Product|{{PAGENAME}}]]
{{Category:3rdParty_Terminal_Devices}}
[[Category:3rdParty Terminal Devices|{{PAGENAME}}]]

==Vendor==
'''Algo Communication Products Ltd.''' is a manufacturer of network-based IP endpoints for voice paging, emergency alerting, visual notification, intercom, and secure door entry applications. Algo products are designed for integration with unified communications, collaboration, and mass notification platforms. The company’s portfolio includes IP speakers, paging adapters, intercoms, visual alerters, display speakers, and endpoint management tools for commercial, education, healthcare, transportation, and industrial environments.

==Description==
The Algo 8301 IP Paging Adapter & Scheduler is a wideband SIP paging adapter designed to connect traditional analog amplifiers and legacy paging infrastructure to modern IP-based communication environments.

The 8301 emulates a page port similar to what is found on a legacy PBX or key system, allowing a traditional amplifier to be integrated into a VoIP or unified communications environment. This enables organizations to retain existing analog speaker infrastructure while adding SIP paging, multicast distribution, scheduled bells, automated announcements, emergency notifications, and other IP-based communication capabilities.

The device includes a balanced and isolated line output to reduce hum and noise when connected to an amplifier, and it also supports multicast audio transmission to additional Algo IP endpoints and compatible multicast-enabled phones. The 8301 is appropriate for education, retail, manufacturing, transportation, healthcare, and other environments where hybrid analog and IP paging is required.

==Functions==
The '''Algo 8301 IP Paging Adapter & Scheduler''' supports a range of functions for paging, alerting, scheduling, and hybrid analog/IP deployments.

Core functions include:
* SIP-based voice paging through registration as a 3rd-party SIP endpoint
* Integration of traditional analog amplifiers into IP and UC environments
* Scheduled bells, tones, and automated announcements synchronized to NTP
* Emergency, safety, security, and customer service audio notifications
* Multicast transmission to Algo IP speakers, paging adapters, display speakers, and compatible multicast-enabled phones
* Ring, page, and alert extension support
* Relay input and relay output support for connected accessories and external triggers
* Music input and background audio distribution
* Web interface configuration and centralized provisioning support

The 8301 can be deployed either as a SIP extension or as a multicast endpoint, depending on the communication design. In hybrid systems, it can provide local analog paging output while simultaneously distributing audio to IP endpoints over the network.

==innovaphone CTI ready==
n.a.

==innovaphone Reverse Proxy ready==
'''Yes.''' Testing was performed in an innovaphone myApps Cloud environment using registration via the cloud reverse proxy. In the innovaphone user object, the hardware ID must match the Authentication ID configured on the Algo device, and Reverse Proxy plus Media Relay must be enabled. The validated setup used STUN, while TURN and ICE were not used. SIP over TCP was validated. SIP over UDP and SIP over TLS were available but not fully validated in this test case.

* STUN yes
* TURN no
* ICE no
* SIP/TCP yes
* SIP UDP yes (not tested)
* SIP/TLS yes (not tested)

==innovaphone WebRTC ready==
n.a.

==Supported Codecs==

* G.722 yes
* G.711 A-law yes
* G.711 u-law yes

==DTMF Support==


* RTP DTMF (RFC2833)

==Supports RFC3261 Digest Authentication Scheme (Section 22.4)==



==Support LDAP Phonebook==
n.a.

==Version==
Product versions used for interop testing:

* Algo 8301 IP Paging Adapter & Scheduler
* Algo 8186 SIP Horn
* Algo 8180 SIP Audio Alerter (G2)
* Algo 8128 (G2) SIP Strobe Light
* Algo 8201 SIP PoE Intercom

* Algo firmware requirement: version 5.4 or later

* innovaphone firmware / software version: innovaphone myApps Cloud IPVA, V15r1sr11

These devices represent Algo IP speakers, paging adapters, visual alerters, and door phones, and similar registration steps apply across Algo SIP endpoints.

==Configuration==
Algo SIP endpoints can register to innovaphone as 3rd-party SIP endpoints for voice paging, loud ringing, emergency alerting, visual notification, and secure door entry.

Interoperability testing was conducted using the Algo 8301 IP Paging Adapter & Scheduler, 8186 SIP Horn, 8180 SIP Audio Alerter (G2), 8128 (G2) SIP Strobe Light, and 8201 SIP PoE Intercom. These represent Algo IP speakers, paging adapters, visual alerters, and door phones, and similar registration steps apply to all devices.

=== '''Algo firmware requirements''' ===
All Algo devices must be running firmware version 5.4 or later. The current firmware version can be verified on the device and can be updated in '''System -> Firmware''' tab.

==== '''Algo device configuration''' ====

# Log in to the Algo device web interface. The device's IP address can be found by using an IP scanner tool such as [https://angryip.org/ Angry IP Scanne]r which is free and open-source.
# Go to '''Basic Settings -> SIP'''.
## [[File:Algo SIP Settings.png|none|thumb|/Algo_SIP_Settings.png|/Algo_SIP_Settings.png]]
# Enter the SIP credentials under '''Base/Page''' using the values from innovaphone dashboard:
#* '''SIP Domain (Proxy Server):''' innovaphone System ID
#* '''SIP Extension:''' extension from innovaphone
#* '''Authentication ID:''' SIP username from innovaphone
#* '''Authentication Password:''' SIP password from innovaphone
# Select '''Save'''.
# Go to '''Advanced Settings -> Advanced SIP'''.
# Set '''SIP Transportation''' to '''TCP'''.
# Set the '''Outbound Proxy''' to the DNS name of the innovaphone system. Example: '''algosolutions-p.innovaphone.com'''
# Set '''SDP SRTP''' to '''Optional''' and '''AES CM 128 HMAC SHA1 80'''.
# Set '''STUN''' to '''stun.innovaphone.com'''.
# Select '''Save'''.
## [[File:AlgoSIPSettings2.png|none|thumb|/AlgoSIPSettings2.png|/AlgoSIPSettings2.png]]
#Go to the '''Status''' tab and verify that the configured extensions have registered correctly.
[[File:AlgoSIPConfirmation.png|none|thumb|/AlgoSIPConfirmation.png|/AlgoSIPConfirmation.png|473x473px]]

===== '''Configuration of the innovaphone user objects in innovaphone myApps''' =====

# Open the '''Users Admin App'''.
# [[File:UsersAdmin.png|thumb|none|/UsersAdmin.png|/UsersAdmin.png]]
# Create the user account for the Algo device. In this example we created a User account for Algo8180 and Algo8181.
# In the '''Devices''' table of the user account, make sure the '''hardware ID''' is the same as the '''Authentication ID''' used in the Algo device.
# Ensure that '''Reverse Proxy''' and '''Media Relay''' are enabled.
# [[File:Innovaphone Config Status.png|none|thumb|/Innovaphone_Config_Status.png|/Innovaphone_Config_Status.png|400x400px]]
# [[File:Status Confirmation.png|none|thumb|/Status_Confirmation.png|/Status_Confirmation.png|402x402px]]
# Or, if preferred, the configuration can also be completed using the Advanced GUI, as shown in the example below.
# [[File:Innovaphone Config Status2.png|none|thumb|/Innovaphone_Config_Status2.png|/Innovaphone_Config_Status2.png|418x418px]]
# Registration of the Algo device can then be checked within the innovaphone system.
# [[File:Innovaphone Config Status using GUI.png|none|thumb|/Innovaphone_Config_Status_using_GUI.png|/Innovaphone_Config_Status_using_GUI.png|400x400px]]

====== Device scope note ======
The same SIP registration workflow applies across Algo IP speakers, paging adapters, visual alerters, and intercoms. Device-specific behaviour and options depend on the endpoint type. For example, the 8301 may additionally use analog paging output, multicast, relay I/O, scheduling, and music input, while other devices may use visual alerting, local audio behaviour, or intercom-specific functions.
* Algo 8301 SIP registration settings
* paging behavior and extension mapping
* multicast settings, if used
* audio output connection to amplifier
* relay input / output use, if applicable
* any deployment notes, limitations, or prerequisites identified during testing

==Summary==
Algo SIP endpoints can integrate with innovaphone as 3rd-party SIP endpoints across key endpoint categories, including paging adapters, IP speakers, visual alerters, and intercoms.

Interoperability in this validation scope was performed using the Algo 8301, 8186, 8180, 8128, and 8201. Similar SIP registration steps apply across these devices, with product-specific options such as analog paging output, multicast, visual alerting, door entry, or local audio behaviour configured according to the endpoint type.

==Contact==
{|
| Algo Communication Products Ltd.
|-
| Burnaby, BC, Canada
|-
| Tel: +1 604-454-3790
|-
| Support: +1 604-454-3792
|-
| Mail: [mailto:info@algosolutions.com info@algosolutions.com]
|}

For additional information please refer to [https://www.algosolutions.com/contact-us/ our contact page].

Howto:Algo 8301 IP Paging Adapter - Algo - 3rd Party Product

2026-04-28T02:14:29Z

Algo: /* Algo device configuration */

[[Image:AlgosolutionsLogo.png|200px|right|/AlgosolutionsLogo.png|/AlgosolutionsLogo.png]]
==Product Name==
Algo [https://www.algosolutions.com/product/8301-ip-paging-adapter-scheduler/ 8301 IP Paging Adapter & Scheduler]

==Certification Status==


==Category==

[[Category:Referral Product|{{PAGENAME}}]]
{{Category:3rdParty_Terminal_Devices}}
[[Category:3rdParty Terminal Devices|{{PAGENAME}}]]

==Vendor==
'''Algo Communication Products Ltd.''' is a manufacturer of network-based IP endpoints for voice paging, emergency alerting, visual notification, intercom, and secure door entry applications. Algo products are designed for integration with unified communications, collaboration, and mass notification platforms. The company’s portfolio includes IP speakers, paging adapters, intercoms, visual alerters, display speakers, and endpoint management tools for commercial, education, healthcare, transportation, and industrial environments.

==Description==
The Algo 8301 IP Paging Adapter & Scheduler is a wideband SIP paging adapter designed to connect traditional analog amplifiers and legacy paging infrastructure to modern IP-based communication environments.

The 8301 emulates a page port similar to what is found on a legacy PBX or key system, allowing a traditional amplifier to be integrated into a VoIP or unified communications environment. This enables organizations to retain existing analog speaker infrastructure while adding SIP paging, multicast distribution, scheduled bells, automated announcements, emergency notifications, and other IP-based communication capabilities.

The device includes a balanced and isolated line output to reduce hum and noise when connected to an amplifier, and it also supports multicast audio transmission to additional Algo IP endpoints and compatible multicast-enabled phones. The 8301 is appropriate for education, retail, manufacturing, transportation, healthcare, and other environments where hybrid analog and IP paging is required.

==Functions==
The '''Algo 8301 IP Paging Adapter & Scheduler''' supports a range of functions for paging, alerting, scheduling, and hybrid analog/IP deployments.

Core functions include:
* SIP-based voice paging through registration as a 3rd-party SIP endpoint
* Integration of traditional analog amplifiers into IP and UC environments
* Scheduled bells, tones, and automated announcements synchronized to NTP
* Emergency, safety, security, and customer service audio notifications
* Multicast transmission to Algo IP speakers, paging adapters, display speakers, and compatible multicast-enabled phones
* Ring, page, and alert extension support
* Relay input and relay output support for connected accessories and external triggers
* Music input and background audio distribution
* Web interface configuration and centralized provisioning support

The 8301 can be deployed either as a SIP extension or as a multicast endpoint, depending on the communication design. In hybrid systems, it can provide local analog paging output while simultaneously distributing audio to IP endpoints over the network.

==innovaphone CTI ready==
n.a.

==innovaphone Reverse Proxy ready==
'''Yes.''' Testing was performed in an innovaphone myApps Cloud environment using registration via the cloud reverse proxy. In the innovaphone user object, the hardware ID must match the Authentication ID configured on the Algo device, and Reverse Proxy plus Media Relay must be enabled. The validated setup used STUN, while TURN and ICE were not used. SIP over TCP was validated. SIP over UDP and SIP over TLS were available but not fully validated in this test case.

* STUN yes
* TURN no
* ICE no
* SIP/TCP yes
* SIP UDP yes (not tested)
* SIP/TLS yes (not tested)

==innovaphone WebRTC ready==
n.a.

==Supported Codecs==

* G.722 yes
* G.711 A-law yes
* G.711 u-law yes

==DTMF Support==


* RTP DTMF (RFC2833)

==Supports RFC3261 Digest Authentication Scheme (Section 22.4)==



==Support LDAP Phonebook==
n.a.

==Version==
Product versions used for interop testing:

* Algo 8301 IP Paging Adapter & Scheduler
* Algo 8186 SIP Horn
* Algo 8180 SIP Audio Alerter (G2)
* Algo 8128 (G2) SIP Strobe Light
* Algo 8201 SIP PoE Intercom

* Algo firmware requirement: version 5.4 or later

* innovaphone firmware / software version: innovaphone myApps Cloud IPVA, V15r1sr11

These devices represent Algo IP speakers, paging adapters, visual alerters, and door phones, and similar registration steps apply across Algo SIP endpoints.

==Configuration==
Algo SIP endpoints can register to innovaphone as 3rd-party SIP endpoints for voice paging, loud ringing, emergency alerting, visual notification, and secure door entry.

Interoperability testing was conducted using the Algo 8301 IP Paging Adapter & Scheduler, 8186 SIP Horn, 8180 SIP Audio Alerter (G2), 8128 (G2) SIP Strobe Light, and 8201 SIP PoE Intercom. These represent Algo IP speakers, paging adapters, visual alerters, and door phones, and similar registration steps apply to all devices.

=== '''Algo firmware requirements''' ===
All Algo devices must be running firmware version 5.4 or later. The current firmware version can be verified on the device and can be updated in '''System -> Firmware''' tab.

==== '''Algo device configuration''' ====

# Log in to the Algo device web interface. The device's IP address can be found by using an IP scanner tool such as [https://angryip.org/ Angry IP Scanne]r which is free and open-source.
# Go to '''Basic Settings -> SIP'''.
## [[File:Algo SIP Settings.png|none|thumb|/Algo_SIP_Settings.png]]
# Enter the SIP credentials under '''Base/Page''' using the values from innovaphone dashboard:
#* '''SIP Domain (Proxy Server):''' innovaphone System ID
#* '''SIP Extension:''' extension from innovaphone
#* '''Authentication ID:''' SIP username from innovaphone
#* '''Authentication Password:''' SIP password from innovaphone
# Select '''Save'''.
# Go to '''Advanced Settings -> Advanced SIP'''.
# Set '''SIP Transportation''' to '''TCP'''.
# Set the '''Outbound Proxy''' to the DNS name of the innovaphone system. Example: '''algosolutions-p.innovaphone.com'''
# Set '''SDP SRTP''' to '''Optional''' and '''AES CM 128 HMAC SHA1 80'''.
# Set '''STUN''' to '''stun.innovaphone.com'''.
# Select '''Save'''.
## [[File:AlgoSIPSettings2.png|none|thumb|/AlgoSIPSettings2.png]]
#Go to the '''Status''' tab and verify that the configured extensions have registered correctly.
[[File:AlgoSIPConfirmation.png|none|thumb|/AlgoSIPConfirmation.png]]

===== '''Configuration of the innovaphone user objects in innovaphone myApps''' =====

# Open the '''Users Admin App'''.
# [[File:UsersAdmin.png|thumb|none|/UsersAdmin.png|/UsersAdmin.png]]
# Create the user account for the Algo device. In this example we created a User account for Algo8180 and Algo8181.
# In the '''Devices''' table of the user account, make sure the '''hardware ID''' is the same as the '''Authentication ID''' used in the Algo device.
# Ensure that '''Reverse Proxy''' and '''Media Relay''' are enabled.
# [[File:Innovaphone Config Status.png|none|thumb|/Innovaphone_Config_Status.png]]
# [[File:Status Confirmation.png|none|thumb|/Status_Confirmation.png]]
# Or, if preferred, the configuration can also be completed using the Advanced GUI, as shown in the example below.
# [[File:Innovaphone Config Status2.png|none|thumb|/Innovaphone_Config_Status2.png]]
# Registration of the Algo device can then be checked within the innovaphone system.
# [[File:Innovaphone Config Status using GUI.png|none|thumb|/Innovaphone_Config_Status_using_GUI.png]]

====== Device scope note ======
The same SIP registration workflow applies across Algo IP speakers, paging adapters, visual alerters, and intercoms. Device-specific behaviour and options depend on the endpoint type. For example, the 8301 may additionally use analog paging output, multicast, relay I/O, scheduling, and music input, while other devices may use visual alerting, local audio behaviour, or intercom-specific functions.
* Algo 8301 SIP registration settings
* paging behavior and extension mapping
* multicast settings, if used
* audio output connection to amplifier
* relay input / output use, if applicable
* any deployment notes, limitations, or prerequisites identified during testing

==Summary==
Algo SIP endpoints can integrate with innovaphone as 3rd-party SIP endpoints across key endpoint categories, including paging adapters, IP speakers, visual alerters, and intercoms.

Interoperability in this validation scope was performed using the Algo 8301, 8186, 8180, 8128, and 8201. Similar SIP registration steps apply across these devices, with product-specific options such as analog paging output, multicast, visual alerting, door entry, or local audio behaviour configured according to the endpoint type.

==Contact==
{|
| Algo Communication Products Ltd.
|-
| Burnaby, BC, Canada
|-
| Tel: +1 604-454-3790
|-
| Support: +1 604-454-3792
|-
| Mail: [mailto:info@algosolutions.com info@algosolutions.com]
|}

For additional information please refer to [https://www.algosolutions.com/contact-us/ our contact page].

Howto:Algo 8301 IP Paging Adapter - Algo - 3rd Party Product

2026-04-28T02:13:43Z

Algo: /* Algo device configuration */

[[Image:AlgosolutionsLogo.png|200px|right|/AlgosolutionsLogo.png|/AlgosolutionsLogo.png]]
==Product Name==
Algo [https://www.algosolutions.com/product/8301-ip-paging-adapter-scheduler/ 8301 IP Paging Adapter & Scheduler]

==Certification Status==


==Category==

[[Category:Referral Product|{{PAGENAME}}]]
{{Category:3rdParty_Terminal_Devices}}
[[Category:3rdParty Terminal Devices|{{PAGENAME}}]]

==Vendor==
'''Algo Communication Products Ltd.''' is a manufacturer of network-based IP endpoints for voice paging, emergency alerting, visual notification, intercom, and secure door entry applications. Algo products are designed for integration with unified communications, collaboration, and mass notification platforms. The company’s portfolio includes IP speakers, paging adapters, intercoms, visual alerters, display speakers, and endpoint management tools for commercial, education, healthcare, transportation, and industrial environments.

==Description==
The Algo 8301 IP Paging Adapter & Scheduler is a wideband SIP paging adapter designed to connect traditional analog amplifiers and legacy paging infrastructure to modern IP-based communication environments.

The 8301 emulates a page port similar to what is found on a legacy PBX or key system, allowing a traditional amplifier to be integrated into a VoIP or unified communications environment. This enables organizations to retain existing analog speaker infrastructure while adding SIP paging, multicast distribution, scheduled bells, automated announcements, emergency notifications, and other IP-based communication capabilities.

The device includes a balanced and isolated line output to reduce hum and noise when connected to an amplifier, and it also supports multicast audio transmission to additional Algo IP endpoints and compatible multicast-enabled phones. The 8301 is appropriate for education, retail, manufacturing, transportation, healthcare, and other environments where hybrid analog and IP paging is required.

==Functions==
The '''Algo 8301 IP Paging Adapter & Scheduler''' supports a range of functions for paging, alerting, scheduling, and hybrid analog/IP deployments.

Core functions include:
* SIP-based voice paging through registration as a 3rd-party SIP endpoint
* Integration of traditional analog amplifiers into IP and UC environments
* Scheduled bells, tones, and automated announcements synchronized to NTP
* Emergency, safety, security, and customer service audio notifications
* Multicast transmission to Algo IP speakers, paging adapters, display speakers, and compatible multicast-enabled phones
* Ring, page, and alert extension support
* Relay input and relay output support for connected accessories and external triggers
* Music input and background audio distribution
* Web interface configuration and centralized provisioning support

The 8301 can be deployed either as a SIP extension or as a multicast endpoint, depending on the communication design. In hybrid systems, it can provide local analog paging output while simultaneously distributing audio to IP endpoints over the network.

==innovaphone CTI ready==
n.a.

==innovaphone Reverse Proxy ready==
'''Yes.''' Testing was performed in an innovaphone myApps Cloud environment using registration via the cloud reverse proxy. In the innovaphone user object, the hardware ID must match the Authentication ID configured on the Algo device, and Reverse Proxy plus Media Relay must be enabled. The validated setup used STUN, while TURN and ICE were not used. SIP over TCP was validated. SIP over UDP and SIP over TLS were available but not fully validated in this test case.

* STUN yes
* TURN no
* ICE no
* SIP/TCP yes
* SIP UDP yes (not tested)
* SIP/TLS yes (not tested)

==innovaphone WebRTC ready==
n.a.

==Supported Codecs==

* G.722 yes
* G.711 A-law yes
* G.711 u-law yes

==DTMF Support==


* RTP DTMF (RFC2833)

==Supports RFC3261 Digest Authentication Scheme (Section 22.4)==



==Support LDAP Phonebook==
n.a.

==Version==
Product versions used for interop testing:

* Algo 8301 IP Paging Adapter & Scheduler
* Algo 8186 SIP Horn
* Algo 8180 SIP Audio Alerter (G2)
* Algo 8128 (G2) SIP Strobe Light
* Algo 8201 SIP PoE Intercom

* Algo firmware requirement: version 5.4 or later

* innovaphone firmware / software version: innovaphone myApps Cloud IPVA, V15r1sr11

These devices represent Algo IP speakers, paging adapters, visual alerters, and door phones, and similar registration steps apply across Algo SIP endpoints.

==Configuration==
Algo SIP endpoints can register to innovaphone as 3rd-party SIP endpoints for voice paging, loud ringing, emergency alerting, visual notification, and secure door entry.

Interoperability testing was conducted using the Algo 8301 IP Paging Adapter & Scheduler, 8186 SIP Horn, 8180 SIP Audio Alerter (G2), 8128 (G2) SIP Strobe Light, and 8201 SIP PoE Intercom. These represent Algo IP speakers, paging adapters, visual alerters, and door phones, and similar registration steps apply to all devices.

=== '''Algo firmware requirements''' ===
All Algo devices must be running firmware version 5.4 or later. The current firmware version can be verified on the device and can be updated in '''System -> Firmware''' tab.

==== '''Algo device configuration''' ====

# Log in to the Algo device web interface. The device's IP address can be found by using an IP scanner tool such as [https://angryip.org/ Angry IP Scanne]r which is free and open-source.
# Go to '''Basic Settings -> SIP'''.
## [[File:Algo SIP Settings.png|none|thumb]]
# Enter the SIP credentials under '''Base/Page''' using the values from innovaphone dashboard:
#* '''SIP Domain (Proxy Server):''' innovaphone System ID
#* '''SIP Extension:''' extension from innovaphone
#* '''Authentication ID:''' SIP username from innovaphone
#* '''Authentication Password:''' SIP password from innovaphone
# Select '''Save'''.
# Go to '''Advanced Settings -> Advanced SIP'''.
# Set '''SIP Transportation''' to '''TCP'''.
# Set the '''Outbound Proxy''' to the DNS name of the innovaphone system. Example: '''algosolutions-p.innovaphone.com'''
# Set '''SDP SRTP''' to '''Optional''' and '''AES CM 128 HMAC SHA1 80'''.
# Set '''STUN''' to '''stun.innovaphone.com'''.
# Select '''Save'''.
## [[File:AlgoSIPSettings2.png|none|thumb]]
#Go to the '''Status''' tab and verify that the configured extensions have registered correctly.
[[File:AlgoSIPConfirmation.png|none|thumb]]

===== '''Configuration of the innovaphone user objects in innovaphone myApps''' =====

# Open the '''Users Admin App'''.
# [[File:UsersAdmin.png|thumb|/UsersAdmin.png|none|/UsersAdmin.png]]
# Create the user account for the Algo device. In this example we created a User account for Algo8180 and Algo8181.
# In the '''Devices''' table of the user account, make sure the '''hardware ID''' is the same as the '''Authentication ID''' used in the Algo device.
# Ensure that '''Reverse Proxy''' and '''Media Relay''' are enabled.
# [[File:Innovaphone Config Status.png|none|thumb]]
# [[File:Status Confirmation.png|none|thumb]]
# Or, if preferred, the configuration can also be completed using the Advanced GUI, as shown in the example below.
# [[File:Innovaphone Config Status2.png|none|thumb]]
# Registration of the Algo device can then be checked within the innovaphone system.
# [[File:Innovaphone Config Status using GUI.png|none|thumb]]

====== Device scope note ======
The same SIP registration workflow applies across Algo IP speakers, paging adapters, visual alerters, and intercoms. Device-specific behaviour and options depend on the endpoint type. For example, the 8301 may additionally use analog paging output, multicast, relay I/O, scheduling, and music input, while other devices may use visual alerting, local audio behaviour, or intercom-specific functions.
* Algo 8301 SIP registration settings
* paging behavior and extension mapping
* multicast settings, if used
* audio output connection to amplifier
* relay input / output use, if applicable
* any deployment notes, limitations, or prerequisites identified during testing

==Summary==
Algo SIP endpoints can integrate with innovaphone as 3rd-party SIP endpoints across key endpoint categories, including paging adapters, IP speakers, visual alerters, and intercoms.

Interoperability in this validation scope was performed using the Algo 8301, 8186, 8180, 8128, and 8201. Similar SIP registration steps apply across these devices, with product-specific options such as analog paging output, multicast, visual alerting, door entry, or local audio behaviour configured according to the endpoint type.

==Contact==
{|
| Algo Communication Products Ltd.
|-
| Burnaby, BC, Canada
|-
| Tel: +1 604-454-3790
|-
| Support: +1 604-454-3792
|-
| Mail: [mailto:info@algosolutions.com info@algosolutions.com]
|}

For additional information please refer to [https://www.algosolutions.com/contact-us/ our contact page].

Howto:Algo 8301 IP Paging Adapter - Algo - 3rd Party Product

2026-04-28T02:09:30Z

Algo: /* Algo device configuration */

[[Image:AlgosolutionsLogo.png|200px|right|/AlgosolutionsLogo.png|/AlgosolutionsLogo.png]]
==Product Name==
Algo [https://www.algosolutions.com/product/8301-ip-paging-adapter-scheduler/ 8301 IP Paging Adapter & Scheduler]

==Certification Status==


==Category==

[[Category:Referral Product|{{PAGENAME}}]]
{{Category:3rdParty_Terminal_Devices}}
[[Category:3rdParty Terminal Devices|{{PAGENAME}}]]

==Vendor==
'''Algo Communication Products Ltd.''' is a manufacturer of network-based IP endpoints for voice paging, emergency alerting, visual notification, intercom, and secure door entry applications. Algo products are designed for integration with unified communications, collaboration, and mass notification platforms. The company’s portfolio includes IP speakers, paging adapters, intercoms, visual alerters, display speakers, and endpoint management tools for commercial, education, healthcare, transportation, and industrial environments.

==Description==
The Algo 8301 IP Paging Adapter & Scheduler is a wideband SIP paging adapter designed to connect traditional analog amplifiers and legacy paging infrastructure to modern IP-based communication environments.

The 8301 emulates a page port similar to what is found on a legacy PBX or key system, allowing a traditional amplifier to be integrated into a VoIP or unified communications environment. This enables organizations to retain existing analog speaker infrastructure while adding SIP paging, multicast distribution, scheduled bells, automated announcements, emergency notifications, and other IP-based communication capabilities.

The device includes a balanced and isolated line output to reduce hum and noise when connected to an amplifier, and it also supports multicast audio transmission to additional Algo IP endpoints and compatible multicast-enabled phones. The 8301 is appropriate for education, retail, manufacturing, transportation, healthcare, and other environments where hybrid analog and IP paging is required.

==Functions==
The '''Algo 8301 IP Paging Adapter & Scheduler''' supports a range of functions for paging, alerting, scheduling, and hybrid analog/IP deployments.

Core functions include:
* SIP-based voice paging through registration as a 3rd-party SIP endpoint
* Integration of traditional analog amplifiers into IP and UC environments
* Scheduled bells, tones, and automated announcements synchronized to NTP
* Emergency, safety, security, and customer service audio notifications
* Multicast transmission to Algo IP speakers, paging adapters, display speakers, and compatible multicast-enabled phones
* Ring, page, and alert extension support
* Relay input and relay output support for connected accessories and external triggers
* Music input and background audio distribution
* Web interface configuration and centralized provisioning support

The 8301 can be deployed either as a SIP extension or as a multicast endpoint, depending on the communication design. In hybrid systems, it can provide local analog paging output while simultaneously distributing audio to IP endpoints over the network.

==innovaphone CTI ready==
n.a.

==innovaphone Reverse Proxy ready==
'''Yes.''' Testing was performed in an innovaphone myApps Cloud environment using registration via the cloud reverse proxy. In the innovaphone user object, the hardware ID must match the Authentication ID configured on the Algo device, and Reverse Proxy plus Media Relay must be enabled. The validated setup used STUN, while TURN and ICE were not used. SIP over TCP was validated. SIP over UDP and SIP over TLS were available but not fully validated in this test case.

* STUN yes
* TURN no
* ICE no
* SIP/TCP yes
* SIP UDP yes (not tested)
* SIP/TLS yes (not tested)

==innovaphone WebRTC ready==
n.a.

==Supported Codecs==

* G.722 yes
* G.711 A-law yes
* G.711 u-law yes

==DTMF Support==


* RTP DTMF (RFC2833)

==Supports RFC3261 Digest Authentication Scheme (Section 22.4)==



==Support LDAP Phonebook==
n.a.

==Version==
Product versions used for interop testing:

* Algo 8301 IP Paging Adapter & Scheduler
* Algo 8186 SIP Horn
* Algo 8180 SIP Audio Alerter (G2)
* Algo 8128 (G2) SIP Strobe Light
* Algo 8201 SIP PoE Intercom

* Algo firmware requirement: version 5.4 or later

* innovaphone firmware / software version: innovaphone myApps Cloud IPVA, V15r1sr11

These devices represent Algo IP speakers, paging adapters, visual alerters, and door phones, and similar registration steps apply across Algo SIP endpoints.

==Configuration==
Algo SIP endpoints can register to innovaphone as 3rd-party SIP endpoints for voice paging, loud ringing, emergency alerting, visual notification, and secure door entry.

Interoperability testing was conducted using the Algo 8301 IP Paging Adapter & Scheduler, 8186 SIP Horn, 8180 SIP Audio Alerter (G2), 8128 (G2) SIP Strobe Light, and 8201 SIP PoE Intercom. These represent Algo IP speakers, paging adapters, visual alerters, and door phones, and similar registration steps apply to all devices.

=== '''Algo firmware requirements''' ===
All Algo devices must be running firmware version 5.4 or later. The current firmware version can be verified on the device and can be updated in '''System -> Firmware''' tab.

==== '''Algo device configuration''' ====

# Log in to the Algo device web interface. The device's IP address can be found by using an IP scanner tool such as [https://angryip.org/ Angry IP Scanne]r which is free and open-source.
# Go to '''Basic Settings -> SIP'''.
## [[index.php?title=File:Algo_SIP_Settings.png|/Algo_SIP_Settings.png]]
# Enter the SIP credentials under '''Base/Page''' using the values from innovaphone dashboard:
#* '''SIP Domain (Proxy Server):''' innovaphone System ID
#* '''SIP Extension:''' extension from innovaphone
#* '''Authentication ID:''' SIP username from innovaphone
#* '''Authentication Password:''' SIP password from innovaphone
# Select '''Save'''.
# Go to '''Advanced Settings -> Advanced SIP'''.
# Set '''SIP Transportation''' to '''TCP'''.
# Set the '''Outbound Proxy''' to the DNS name of the innovaphone system. Example: '''algosolutions-p.innovaphone.com'''
# Set '''SDP SRTP''' to '''Optional''' and '''AES CM 128 HMAC SHA1 80'''.
# Set '''STUN''' to '''stun.innovaphone.com'''.
# Select '''Save'''.
## [[index.php?title=File:AlgoSIPSettings2.png|/AlgoSIPSettings2.png]]
#Go to the '''Status''' tab and verify that the configured extensions have registered correctly.
[[index.php?title=File:AlgoSIPConfirmation.png|/AlgoSIPConfirmation.png]]

===== '''Configuration of the innovaphone user objects in innovaphone myApps''' =====

# Open the '''Users Admin App'''.
# [[File:UsersAdmin.png|thumb|/UsersAdmin.png|none]]
# Create the user account for the Algo device. In this example we created a User account for Algo8180 and Algo8181.
# In the '''Devices''' table of the user account, make sure the '''hardware ID''' is the same as the '''Authentication ID''' used in the Algo device.
# Ensure that '''Reverse Proxy''' and '''Media Relay''' are enabled.
# [[index.php?title=File:Innovaphone_Config_Status.png|/Innovaphone_Config_Status.png|338x338px]]
# [[index.php?title=File:Status_Confirmation.png|/Status_Confirmation.png|342x342px]]
# Or, if preferred, the configuration can also be completed using the Advanced GUI, as shown in the example below.
# [[index.php?title=File:Innovaphone_Config_Status2.png|/Innovaphone_Config_Status2.png]]
# Registration of the Algo device can then be checked within the innovaphone system. [[index.php?title=File:Innovaphone_Config_Status_using_GUI.png|/Innovaphone_Config_Status_using_GUI.png|307x307px]]

====== Device scope note ======
The same SIP registration workflow applies across Algo IP speakers, paging adapters, visual alerters, and intercoms. Device-specific behaviour and options depend on the endpoint type. For example, the 8301 may additionally use analog paging output, multicast, relay I/O, scheduling, and music input, while other devices may use visual alerting, local audio behaviour, or intercom-specific functions.
* Algo 8301 SIP registration settings
* paging behavior and extension mapping
* multicast settings, if used
* audio output connection to amplifier
* relay input / output use, if applicable
* any deployment notes, limitations, or prerequisites identified during testing

==Summary==
Algo SIP endpoints can integrate with innovaphone as 3rd-party SIP endpoints across key endpoint categories, including paging adapters, IP speakers, visual alerters, and intercoms.

Interoperability in this validation scope was performed using the Algo 8301, 8186, 8180, 8128, and 8201. Similar SIP registration steps apply across these devices, with product-specific options such as analog paging output, multicast, visual alerting, door entry, or local audio behaviour configured according to the endpoint type.

==Contact==
{|
| Algo Communication Products Ltd.
|-
| Burnaby, BC, Canada
|-
| Tel: +1 604-454-3790
|-
| Support: +1 604-454-3792
|-
| Mail: [mailto:info@algosolutions.com info@algosolutions.com]
|}

For additional information please refer to [https://www.algosolutions.com/contact-us/ our contact page].

Howto:Algo 8301 IP Paging Adapter - Algo - 3rd Party Product

2026-04-28T01:55:27Z

Algo: /* Algo device configuration */

[[Image:AlgosolutionsLogo.png|200px|right|/AlgosolutionsLogo.png|/AlgosolutionsLogo.png]]
==Product Name==
Algo [https://www.algosolutions.com/product/8301-ip-paging-adapter-scheduler/ 8301 IP Paging Adapter & Scheduler]

==Certification Status==


==Category==

[[Category:Referral Product|{{PAGENAME}}]]
{{Category:3rdParty_Terminal_Devices}}
[[Category:3rdParty Terminal Devices|{{PAGENAME}}]]

==Vendor==
'''Algo Communication Products Ltd.''' is a manufacturer of network-based IP endpoints for voice paging, emergency alerting, visual notification, intercom, and secure door entry applications. Algo products are designed for integration with unified communications, collaboration, and mass notification platforms. The company’s portfolio includes IP speakers, paging adapters, intercoms, visual alerters, display speakers, and endpoint management tools for commercial, education, healthcare, transportation, and industrial environments.

==Description==
The Algo 8301 IP Paging Adapter & Scheduler is a wideband SIP paging adapter designed to connect traditional analog amplifiers and legacy paging infrastructure to modern IP-based communication environments.

The 8301 emulates a page port similar to what is found on a legacy PBX or key system, allowing a traditional amplifier to be integrated into a VoIP or unified communications environment. This enables organizations to retain existing analog speaker infrastructure while adding SIP paging, multicast distribution, scheduled bells, automated announcements, emergency notifications, and other IP-based communication capabilities.

The device includes a balanced and isolated line output to reduce hum and noise when connected to an amplifier, and it also supports multicast audio transmission to additional Algo IP endpoints and compatible multicast-enabled phones. The 8301 is appropriate for education, retail, manufacturing, transportation, healthcare, and other environments where hybrid analog and IP paging is required.

==Functions==
The '''Algo 8301 IP Paging Adapter & Scheduler''' supports a range of functions for paging, alerting, scheduling, and hybrid analog/IP deployments.

Core functions include:
* SIP-based voice paging through registration as a 3rd-party SIP endpoint
* Integration of traditional analog amplifiers into IP and UC environments
* Scheduled bells, tones, and automated announcements synchronized to NTP
* Emergency, safety, security, and customer service audio notifications
* Multicast transmission to Algo IP speakers, paging adapters, display speakers, and compatible multicast-enabled phones
* Ring, page, and alert extension support
* Relay input and relay output support for connected accessories and external triggers
* Music input and background audio distribution
* Web interface configuration and centralized provisioning support

The 8301 can be deployed either as a SIP extension or as a multicast endpoint, depending on the communication design. In hybrid systems, it can provide local analog paging output while simultaneously distributing audio to IP endpoints over the network.

==innovaphone CTI ready==
n.a.

==innovaphone Reverse Proxy ready==
'''Yes.''' Testing was performed in an innovaphone myApps Cloud environment using registration via the cloud reverse proxy. In the innovaphone user object, the hardware ID must match the Authentication ID configured on the Algo device, and Reverse Proxy plus Media Relay must be enabled. The validated setup used STUN, while TURN and ICE were not used. SIP over TCP was validated. SIP over UDP and SIP over TLS were available but not fully validated in this test case.

* STUN yes
* TURN no
* ICE no
* SIP/TCP yes
* SIP UDP yes (not tested)
* SIP/TLS yes (not tested)

==innovaphone WebRTC ready==
n.a.

==Supported Codecs==

* G.722 yes
* G.711 A-law yes
* G.711 u-law yes

==DTMF Support==


* RTP DTMF (RFC2833)

==Supports RFC3261 Digest Authentication Scheme (Section 22.4)==



==Support LDAP Phonebook==
n.a.

==Version==
Product versions used for interop testing:

* Algo 8301 IP Paging Adapter & Scheduler
* Algo 8186 SIP Horn
* Algo 8180 SIP Audio Alerter (G2)
* Algo 8128 (G2) SIP Strobe Light
* Algo 8201 SIP PoE Intercom

* Algo firmware requirement: version 5.4 or later

* innovaphone firmware / software version: innovaphone myApps Cloud IPVA, V15r1sr11

These devices represent Algo IP speakers, paging adapters, visual alerters, and door phones, and similar registration steps apply across Algo SIP endpoints.

==Configuration==
Algo SIP endpoints can register to innovaphone as 3rd-party SIP endpoints for voice paging, loud ringing, emergency alerting, visual notification, and secure door entry.

Interoperability testing was conducted using the Algo 8301 IP Paging Adapter & Scheduler, 8186 SIP Horn, 8180 SIP Audio Alerter (G2), 8128 (G2) SIP Strobe Light, and 8201 SIP PoE Intercom. These represent Algo IP speakers, paging adapters, visual alerters, and door phones, and similar registration steps apply to all devices.

=== '''Algo firmware requirements''' ===
All Algo devices must be running firmware version 5.4 or later. The current firmware version can be verified on the device and can be updated in '''System -> Firmware''' tab.

==== '''Algo device configuration''' ====

# Log in to the Algo device web interface. The device's IP address can be found by using an IP scanner tool such as [https://angryip.org/ Angry IP Scanne]r which is free and open-source.
# Go to '''Basic Settings -> SIP'''.
# [[File:Algo SIP Settings.png|thumb|/Algo_SIP_Settings.png]]Enter the SIP credentials under '''Base/Page''' using the values from innovaphone dashboard:
#* '''SIP Domain (Proxy Server):''' innovaphone System ID
#* '''SIP Extension:''' extension from innovaphone
#* '''Authentication ID:''' SIP username from innovaphone
#* '''Authentication Password:''' SIP password from innovaphone
# Select '''Save'''.
# Go to '''Advanced Settings -> Advanced SIP'''.
# Set '''SIP Transportation''' to '''TCP'''.
# Set the '''Outbound Proxy''' to the DNS name of the innovaphone system. Example: '''algosolutions-p.innovaphone.com'''
# Set '''SDP SRTP''' to '''Optional''' and '''AES CM 128 HMAC SHA1 80'''.
# Set '''STUN''' to '''stun.innovaphone.com'''.
# Select '''Save'''.
# [[File:AlgoSIPSettings2.png|thumb]]Go to the '''Status''' tab and verify that the configured extensions have registered correctly.
[[File:AlgoSIPConfirmation.png|thumb]]

===== '''Configuration of the innovaphone user objects in innovaphone myApps''' =====

# Open the '''Users Admin App'''.
# [[File:UsersAdmin.png|thumb]]Create the user account for the Algo device. In this example we created a User account for Algo8180 and Algo8181.
# In the '''Devices''' table of the user account, make sure the '''hardware ID''' is the same as the '''Authentication ID''' used in the Algo device.
# Ensure that '''Reverse Proxy''' and '''Media Relay''' are enabled.
## [[File:Innovaphone Config Status2.png|thumb]][[File:Innovaphone Config Status.png|thumb]][[File:Status Confirmation.png|thumb]]
# Or, if preferred, the configuration can also be completed using the Advanced GUI, as shown in the example below.
# Registration of the Algo device can then be checked within the innovaphone system.
## [[File:Innovaphone Config Status using GUI.png|thumb]]

====== Device scope note ======
The same SIP registration workflow applies across Algo IP speakers, paging adapters, visual alerters, and intercoms. Device-specific behaviour and options depend on the endpoint type. For example, the 8301 may additionally use analog paging output, multicast, relay I/O, scheduling, and music input, while other devices may use visual alerting, local audio behaviour, or intercom-specific functions.
* Algo 8301 SIP registration settings
* paging behavior and extension mapping
* multicast settings, if used
* audio output connection to amplifier
* relay input / output use, if applicable
* any deployment notes, limitations, or prerequisites identified during testing

==Summary==
Algo SIP endpoints can integrate with innovaphone as 3rd-party SIP endpoints across key endpoint categories, including paging adapters, IP speakers, visual alerters, and intercoms.

Interoperability in this validation scope was performed using the Algo 8301, 8186, 8180, 8128, and 8201. Similar SIP registration steps apply across these devices, with product-specific options such as analog paging output, multicast, visual alerting, door entry, or local audio behaviour configured according to the endpoint type.

==Contact==
{|
| Algo Communication Products Ltd.
|-
| Burnaby, BC, Canada
|-
| Tel: +1 604-454-3790
|-
| Support: +1 604-454-3792
|-
| Mail: [mailto:info@algosolutions.com info@algosolutions.com]
|}

For additional information please refer to [https://www.algosolutions.com/contact-us/ our contact page].

File:Status Confirmation.png

2026-04-28T01:52:17Z

Algo:

Status Confirmation

File:Innovaphone Config Status using GUI.png

2026-04-28T01:49:33Z

Algo:

Innovaphone Config Status using GUI

File:Innovaphone Config Status2.png

2026-04-28T01:48:32Z

Algo:

Innovaphone Config Status

File:Innovaphone Config Status.png

2026-04-28T01:46:40Z

Algo:

Innovaphone Config Status

File:UsersAdmin.png

2026-04-28T01:45:13Z

Algo:

UsersAdmin

File:AlgoSIPConfirmation.png

2026-04-28T01:44:04Z

Algo:

AlgoSIPConfirmation

File:AlgoSIPSettings2.png

2026-04-28T01:42:40Z

Algo:

AlgoSIPSettings2 Screenshot

Howto:Algo 8301 IP Paging Adapter - Algo - 3rd Party Product

2026-04-28T01:41:13Z

Algo: /* Algo device configuration */

[[Image:AlgosolutionsLogo.png|200px|right|/AlgosolutionsLogo.png|/AlgosolutionsLogo.png]]
==Product Name==
Algo [https://www.algosolutions.com/product/8301-ip-paging-adapter-scheduler/ 8301 IP Paging Adapter & Scheduler]

==Certification Status==


==Category==

[[Category:Referral Product|{{PAGENAME}}]]
{{Category:3rdParty_Terminal_Devices}}
[[Category:3rdParty Terminal Devices|{{PAGENAME}}]]

==Vendor==
'''Algo Communication Products Ltd.''' is a manufacturer of network-based IP endpoints for voice paging, emergency alerting, visual notification, intercom, and secure door entry applications. Algo products are designed for integration with unified communications, collaboration, and mass notification platforms. The company’s portfolio includes IP speakers, paging adapters, intercoms, visual alerters, display speakers, and endpoint management tools for commercial, education, healthcare, transportation, and industrial environments.

==Description==
The Algo 8301 IP Paging Adapter & Scheduler is a wideband SIP paging adapter designed to connect traditional analog amplifiers and legacy paging infrastructure to modern IP-based communication environments.

The 8301 emulates a page port similar to what is found on a legacy PBX or key system, allowing a traditional amplifier to be integrated into a VoIP or unified communications environment. This enables organizations to retain existing analog speaker infrastructure while adding SIP paging, multicast distribution, scheduled bells, automated announcements, emergency notifications, and other IP-based communication capabilities.

The device includes a balanced and isolated line output to reduce hum and noise when connected to an amplifier, and it also supports multicast audio transmission to additional Algo IP endpoints and compatible multicast-enabled phones. The 8301 is appropriate for education, retail, manufacturing, transportation, healthcare, and other environments where hybrid analog and IP paging is required.

==Functions==
The '''Algo 8301 IP Paging Adapter & Scheduler''' supports a range of functions for paging, alerting, scheduling, and hybrid analog/IP deployments.

Core functions include:
* SIP-based voice paging through registration as a 3rd-party SIP endpoint
* Integration of traditional analog amplifiers into IP and UC environments
* Scheduled bells, tones, and automated announcements synchronized to NTP
* Emergency, safety, security, and customer service audio notifications
* Multicast transmission to Algo IP speakers, paging adapters, display speakers, and compatible multicast-enabled phones
* Ring, page, and alert extension support
* Relay input and relay output support for connected accessories and external triggers
* Music input and background audio distribution
* Web interface configuration and centralized provisioning support

The 8301 can be deployed either as a SIP extension or as a multicast endpoint, depending on the communication design. In hybrid systems, it can provide local analog paging output while simultaneously distributing audio to IP endpoints over the network.

==innovaphone CTI ready==
n.a.

==innovaphone Reverse Proxy ready==
'''Yes.''' Testing was performed in an innovaphone myApps Cloud environment using registration via the cloud reverse proxy. In the innovaphone user object, the hardware ID must match the Authentication ID configured on the Algo device, and Reverse Proxy plus Media Relay must be enabled. The validated setup used STUN, while TURN and ICE were not used. SIP over TCP was validated. SIP over UDP and SIP over TLS were available but not fully validated in this test case.

* STUN yes
* TURN no
* ICE no
* SIP/TCP yes
* SIP UDP yes (not tested)
* SIP/TLS yes (not tested)

==innovaphone WebRTC ready==
n.a.

==Supported Codecs==

* G.722 yes
* G.711 A-law yes
* G.711 u-law yes

==DTMF Support==


* RTP DTMF (RFC2833)

==Supports RFC3261 Digest Authentication Scheme (Section 22.4)==



==Support LDAP Phonebook==
n.a.

==Version==
Product versions used for interop testing:

* Algo 8301 IP Paging Adapter & Scheduler
* Algo 8186 SIP Horn
* Algo 8180 SIP Audio Alerter (G2)
* Algo 8128 (G2) SIP Strobe Light
* Algo 8201 SIP PoE Intercom

* Algo firmware requirement: version 5.4 or later

* innovaphone firmware / software version: innovaphone myApps Cloud IPVA, V15r1sr11

These devices represent Algo IP speakers, paging adapters, visual alerters, and door phones, and similar registration steps apply across Algo SIP endpoints.

==Configuration==
Algo SIP endpoints can register to innovaphone as 3rd-party SIP endpoints for voice paging, loud ringing, emergency alerting, visual notification, and secure door entry.

Interoperability testing was conducted using the Algo 8301 IP Paging Adapter & Scheduler, 8186 SIP Horn, 8180 SIP Audio Alerter (G2), 8128 (G2) SIP Strobe Light, and 8201 SIP PoE Intercom. These represent Algo IP speakers, paging adapters, visual alerters, and door phones, and similar registration steps apply to all devices.

=== '''Algo firmware requirements''' ===
All Algo devices must be running firmware version 5.4 or later. The current firmware version can be verified on the device and can be updated in '''System -> Firmware''' tab.

==== '''Algo device configuration''' ====

# Log in to the Algo device web interface. The device's IP address can be found by using an IP scanner tool such as [https://angryip.org/ Angry IP Scanne]r which is free and open-source.
# Go to '''Basic Settings -> SIP'''.
# [[File:Algo SIP Settings.png|thumb]]Enter the SIP credentials under '''Base/Page''' using the values from innovaphone dashboard:
#* '''SIP Domain (Proxy Server):''' innovaphone System ID
#* '''SIP Extension:''' extension from innovaphone
#* '''Authentication ID:''' SIP username from innovaphone
#* '''Authentication Password:''' SIP password from innovaphone
# Select '''Save'''.
# Go to '''Advanced Settings -> Advanced SIP'''.
# Set '''SIP Transportation''' to '''TCP'''.
# Set the '''Outbound Proxy''' to the DNS name of the innovaphone system. Example: '''algosolutions-p.innovaphone.com'''
# Set '''SDP SRTP''' to '''Optional''' and '''AES CM 128 HMAC SHA1 80'''.
# Set '''STUN''' to '''stun.innovaphone.com'''.
# Select '''Save'''.
# Go to the '''Status''' tab and verify that the configured extensions have registered correctly.

===== '''Configuration of the innovaphone user objects in innovaphone myApps''' =====

# Open the '''Users Admin App'''.
# Create the user account for the Algo device. In this example we created a User account for Algo8180 and Algo8181.
# In the '''Devices''' table of the user account, make sure the '''hardware ID''' is the same as the '''Authentication ID''' used in the Algo device.
# Ensure that '''Reverse Proxy''' and '''Media Relay''' are enabled.
# Or, if preferred, the configuration can also be completed using the Advanced GUI, as shown in the example below.
# Registration of the Algo device can then be checked within the innovaphone system.

====== Device scope note ======
The same SIP registration workflow applies across Algo IP speakers, paging adapters, visual alerters, and intercoms. Device-specific behaviour and options depend on the endpoint type. For example, the 8301 may additionally use analog paging output, multicast, relay I/O, scheduling, and music input, while other devices may use visual alerting, local audio behaviour, or intercom-specific functions.
* Algo 8301 SIP registration settings
* paging behavior and extension mapping
* multicast settings, if used
* audio output connection to amplifier
* relay input / output use, if applicable
* any deployment notes, limitations, or prerequisites identified during testing

==Summary==
Algo SIP endpoints can integrate with innovaphone as 3rd-party SIP endpoints across key endpoint categories, including paging adapters, IP speakers, visual alerters, and intercoms.

Interoperability in this validation scope was performed using the Algo 8301, 8186, 8180, 8128, and 8201. Similar SIP registration steps apply across these devices, with product-specific options such as analog paging output, multicast, visual alerting, door entry, or local audio behaviour configured according to the endpoint type.

==Contact==
{|
| Algo Communication Products Ltd.
|-
| Burnaby, BC, Canada
|-
| Tel: +1 604-454-3790
|-
| Support: +1 604-454-3792
|-
| Mail: [mailto:info@algosolutions.com info@algosolutions.com]
|}

For additional information please refer to [https://www.algosolutions.com/contact-us/ our contact page].

File:Algo SIP Settings.png

2026-04-28T01:40:35Z

Algo:

Algo SIP Settings screenshot

Howto:Algo 8301 IP Paging Adapter - Algo - 3rd Party Product

2026-04-28T01:36:18Z

Algo: /* Summary */

[[Image:AlgosolutionsLogo.png|200px|right|/AlgosolutionsLogo.png|/AlgosolutionsLogo.png]]
==Product Name==
Algo [https://www.algosolutions.com/product/8301-ip-paging-adapter-scheduler/ 8301 IP Paging Adapter & Scheduler]

==Certification Status==


==Category==

[[Category:Referral Product|{{PAGENAME}}]]
{{Category:3rdParty_Terminal_Devices}}
[[Category:3rdParty Terminal Devices|{{PAGENAME}}]]

==Vendor==
'''Algo Communication Products Ltd.''' is a manufacturer of network-based IP endpoints for voice paging, emergency alerting, visual notification, intercom, and secure door entry applications. Algo products are designed for integration with unified communications, collaboration, and mass notification platforms. The company’s portfolio includes IP speakers, paging adapters, intercoms, visual alerters, display speakers, and endpoint management tools for commercial, education, healthcare, transportation, and industrial environments.

==Description==
The Algo 8301 IP Paging Adapter & Scheduler is a wideband SIP paging adapter designed to connect traditional analog amplifiers and legacy paging infrastructure to modern IP-based communication environments.

The 8301 emulates a page port similar to what is found on a legacy PBX or key system, allowing a traditional amplifier to be integrated into a VoIP or unified communications environment. This enables organizations to retain existing analog speaker infrastructure while adding SIP paging, multicast distribution, scheduled bells, automated announcements, emergency notifications, and other IP-based communication capabilities.

The device includes a balanced and isolated line output to reduce hum and noise when connected to an amplifier, and it also supports multicast audio transmission to additional Algo IP endpoints and compatible multicast-enabled phones. The 8301 is appropriate for education, retail, manufacturing, transportation, healthcare, and other environments where hybrid analog and IP paging is required.

==Functions==
The '''Algo 8301 IP Paging Adapter & Scheduler''' supports a range of functions for paging, alerting, scheduling, and hybrid analog/IP deployments.

Core functions include:
* SIP-based voice paging through registration as a 3rd-party SIP endpoint
* Integration of traditional analog amplifiers into IP and UC environments
* Scheduled bells, tones, and automated announcements synchronized to NTP
* Emergency, safety, security, and customer service audio notifications
* Multicast transmission to Algo IP speakers, paging adapters, display speakers, and compatible multicast-enabled phones
* Ring, page, and alert extension support
* Relay input and relay output support for connected accessories and external triggers
* Music input and background audio distribution
* Web interface configuration and centralized provisioning support

The 8301 can be deployed either as a SIP extension or as a multicast endpoint, depending on the communication design. In hybrid systems, it can provide local analog paging output while simultaneously distributing audio to IP endpoints over the network.

==innovaphone CTI ready==
n.a.

==innovaphone Reverse Proxy ready==
'''Yes.''' Testing was performed in an innovaphone myApps Cloud environment using registration via the cloud reverse proxy. In the innovaphone user object, the hardware ID must match the Authentication ID configured on the Algo device, and Reverse Proxy plus Media Relay must be enabled. The validated setup used STUN, while TURN and ICE were not used. SIP over TCP was validated. SIP over UDP and SIP over TLS were available but not fully validated in this test case.

* STUN yes
* TURN no
* ICE no
* SIP/TCP yes
* SIP UDP yes (not tested)
* SIP/TLS yes (not tested)

==innovaphone WebRTC ready==
n.a.

==Supported Codecs==

* G.722 yes
* G.711 A-law yes
* G.711 u-law yes

==DTMF Support==


* RTP DTMF (RFC2833)

==Supports RFC3261 Digest Authentication Scheme (Section 22.4)==



==Support LDAP Phonebook==
n.a.

==Version==
Product versions used for interop testing:

* Algo 8301 IP Paging Adapter & Scheduler
* Algo 8186 SIP Horn
* Algo 8180 SIP Audio Alerter (G2)
* Algo 8128 (G2) SIP Strobe Light
* Algo 8201 SIP PoE Intercom

* Algo firmware requirement: version 5.4 or later

* innovaphone firmware / software version: innovaphone myApps Cloud IPVA, V15r1sr11

These devices represent Algo IP speakers, paging adapters, visual alerters, and door phones, and similar registration steps apply across Algo SIP endpoints.

==Configuration==
Algo SIP endpoints can register to innovaphone as 3rd-party SIP endpoints for voice paging, loud ringing, emergency alerting, visual notification, and secure door entry.

Interoperability testing was conducted using the Algo 8301 IP Paging Adapter & Scheduler, 8186 SIP Horn, 8180 SIP Audio Alerter (G2), 8128 (G2) SIP Strobe Light, and 8201 SIP PoE Intercom. These represent Algo IP speakers, paging adapters, visual alerters, and door phones, and similar registration steps apply to all devices.

=== '''Algo firmware requirements''' ===
All Algo devices must be running firmware version 5.4 or later. The current firmware version can be verified on the device and can be updated in '''System -> Firmware''' tab.

==== '''Algo device configuration''' ====

# Log in to the Algo device web interface. The device's IP address can be found by using an IP scanner tool such as [https://angryip.org/ Angry IP Scanne]r which is free and open-source.
# Go to '''Basic Settings -> SIP'''.
# Enter the SIP credentials under '''Base/Page''' using the values from innovaphone dashboard:
#* '''SIP Domain (Proxy Server):''' innovaphone System ID
#* '''SIP Extension:''' extension from innovaphone
#* '''Authentication ID:''' SIP username from innovaphone
#* '''Authentication Password:''' SIP password from innovaphone
# Select '''Save'''.
# Go to '''Advanced Settings -> Advanced SIP'''.
# Set '''SIP Transportation''' to '''TCP'''.
# Set the '''Outbound Proxy''' to the DNS name of the innovaphone system. Example: '''algosolutions-p.innovaphone.com'''
# Set '''SDP SRTP''' to '''Optional''' and '''AES CM 128 HMAC SHA1 80'''.
# Set '''STUN''' to '''stun.innovaphone.com'''.
# Select '''Save'''.
# Go to the '''Status''' tab and verify that the configured extensions have registered correctly.

===== '''Configuration of the innovaphone user objects in innovaphone myApps''' =====

# Open the '''Users Admin App'''.
# Create the user account for the Algo device. In this example we created a User account for Algo8180 and Algo8181.
# In the '''Devices''' table of the user account, make sure the '''hardware ID''' is the same as the '''Authentication ID''' used in the Algo device.
# Ensure that '''Reverse Proxy''' and '''Media Relay''' are enabled.
# Or, if preferred, the configuration can also be completed using the Advanced GUI, as shown in the example below.
# Registration of the Algo device can then be checked within the innovaphone system.

====== Device scope note ======
The same SIP registration workflow applies across Algo IP speakers, paging adapters, visual alerters, and intercoms. Device-specific behaviour and options depend on the endpoint type. For example, the 8301 may additionally use analog paging output, multicast, relay I/O, scheduling, and music input, while other devices may use visual alerting, local audio behaviour, or intercom-specific functions.
* Algo 8301 SIP registration settings
* paging behavior and extension mapping
* multicast settings, if used
* audio output connection to amplifier
* relay input / output use, if applicable
* any deployment notes, limitations, or prerequisites identified during testing

==Summary==
Algo SIP endpoints can integrate with innovaphone as 3rd-party SIP endpoints across key endpoint categories, including paging adapters, IP speakers, visual alerters, and intercoms.

Interoperability in this validation scope was performed using the Algo 8301, 8186, 8180, 8128, and 8201. Similar SIP registration steps apply across these devices, with product-specific options such as analog paging output, multicast, visual alerting, door entry, or local audio behaviour configured according to the endpoint type.

==Contact==
{|
| Algo Communication Products Ltd.
|-
| Burnaby, BC, Canada
|-
| Tel: +1 604-454-3790
|-
| Support: +1 604-454-3792
|-
| Mail: [mailto:info@algosolutions.com info@algosolutions.com]
|}

For additional information please refer to [https://www.algosolutions.com/contact-us/ our contact page].

Howto:Algo 8301 IP Paging Adapter - Algo - 3rd Party Product

2026-04-28T01:33:28Z

Algo: /* Configuration */

[[Image:AlgosolutionsLogo.png|200px|right|/AlgosolutionsLogo.png|/AlgosolutionsLogo.png]]
==Product Name==
Algo [https://www.algosolutions.com/product/8301-ip-paging-adapter-scheduler/ 8301 IP Paging Adapter & Scheduler]

==Certification Status==


==Category==

[[Category:Referral Product|{{PAGENAME}}]]
{{Category:3rdParty_Terminal_Devices}}
[[Category:3rdParty Terminal Devices|{{PAGENAME}}]]

==Vendor==
'''Algo Communication Products Ltd.''' is a manufacturer of network-based IP endpoints for voice paging, emergency alerting, visual notification, intercom, and secure door entry applications. Algo products are designed for integration with unified communications, collaboration, and mass notification platforms. The company’s portfolio includes IP speakers, paging adapters, intercoms, visual alerters, display speakers, and endpoint management tools for commercial, education, healthcare, transportation, and industrial environments.

==Description==
The Algo 8301 IP Paging Adapter & Scheduler is a wideband SIP paging adapter designed to connect traditional analog amplifiers and legacy paging infrastructure to modern IP-based communication environments.

The 8301 emulates a page port similar to what is found on a legacy PBX or key system, allowing a traditional amplifier to be integrated into a VoIP or unified communications environment. This enables organizations to retain existing analog speaker infrastructure while adding SIP paging, multicast distribution, scheduled bells, automated announcements, emergency notifications, and other IP-based communication capabilities.

The device includes a balanced and isolated line output to reduce hum and noise when connected to an amplifier, and it also supports multicast audio transmission to additional Algo IP endpoints and compatible multicast-enabled phones. The 8301 is appropriate for education, retail, manufacturing, transportation, healthcare, and other environments where hybrid analog and IP paging is required.

==Functions==
The '''Algo 8301 IP Paging Adapter & Scheduler''' supports a range of functions for paging, alerting, scheduling, and hybrid analog/IP deployments.

Core functions include:
* SIP-based voice paging through registration as a 3rd-party SIP endpoint
* Integration of traditional analog amplifiers into IP and UC environments
* Scheduled bells, tones, and automated announcements synchronized to NTP
* Emergency, safety, security, and customer service audio notifications
* Multicast transmission to Algo IP speakers, paging adapters, display speakers, and compatible multicast-enabled phones
* Ring, page, and alert extension support
* Relay input and relay output support for connected accessories and external triggers
* Music input and background audio distribution
* Web interface configuration and centralized provisioning support

The 8301 can be deployed either as a SIP extension or as a multicast endpoint, depending on the communication design. In hybrid systems, it can provide local analog paging output while simultaneously distributing audio to IP endpoints over the network.

==innovaphone CTI ready==
n.a.

==innovaphone Reverse Proxy ready==
'''Yes.''' Testing was performed in an innovaphone myApps Cloud environment using registration via the cloud reverse proxy. In the innovaphone user object, the hardware ID must match the Authentication ID configured on the Algo device, and Reverse Proxy plus Media Relay must be enabled. The validated setup used STUN, while TURN and ICE were not used. SIP over TCP was validated. SIP over UDP and SIP over TLS were available but not fully validated in this test case.

* STUN yes
* TURN no
* ICE no
* SIP/TCP yes
* SIP UDP yes (not tested)
* SIP/TLS yes (not tested)

==innovaphone WebRTC ready==
n.a.

==Supported Codecs==

* G.722 yes
* G.711 A-law yes
* G.711 u-law yes

==DTMF Support==


* RTP DTMF (RFC2833)

==Supports RFC3261 Digest Authentication Scheme (Section 22.4)==



==Support LDAP Phonebook==
n.a.

==Version==
Product versions used for interop testing:

* Algo 8301 IP Paging Adapter & Scheduler
* Algo 8186 SIP Horn
* Algo 8180 SIP Audio Alerter (G2)
* Algo 8128 (G2) SIP Strobe Light
* Algo 8201 SIP PoE Intercom

* Algo firmware requirement: version 5.4 or later

* innovaphone firmware / software version: innovaphone myApps Cloud IPVA, V15r1sr11

These devices represent Algo IP speakers, paging adapters, visual alerters, and door phones, and similar registration steps apply across Algo SIP endpoints.

==Configuration==
Algo SIP endpoints can register to innovaphone as 3rd-party SIP endpoints for voice paging, loud ringing, emergency alerting, visual notification, and secure door entry.

Interoperability testing was conducted using the Algo 8301 IP Paging Adapter & Scheduler, 8186 SIP Horn, 8180 SIP Audio Alerter (G2), 8128 (G2) SIP Strobe Light, and 8201 SIP PoE Intercom. These represent Algo IP speakers, paging adapters, visual alerters, and door phones, and similar registration steps apply to all devices.

=== '''Algo firmware requirements''' ===
All Algo devices must be running firmware version 5.4 or later. The current firmware version can be verified on the device and can be updated in '''System -> Firmware''' tab.

==== '''Algo device configuration''' ====

# Log in to the Algo device web interface. The device's IP address can be found by using an IP scanner tool such as [https://angryip.org/ Angry IP Scanne]r which is free and open-source.
# Go to '''Basic Settings -> SIP'''.
# Enter the SIP credentials under '''Base/Page''' using the values from innovaphone dashboard:
#* '''SIP Domain (Proxy Server):''' innovaphone System ID
#* '''SIP Extension:''' extension from innovaphone
#* '''Authentication ID:''' SIP username from innovaphone
#* '''Authentication Password:''' SIP password from innovaphone
# Select '''Save'''.
# Go to '''Advanced Settings -> Advanced SIP'''.
# Set '''SIP Transportation''' to '''TCP'''.
# Set the '''Outbound Proxy''' to the DNS name of the innovaphone system. Example: '''algosolutions-p.innovaphone.com'''
# Set '''SDP SRTP''' to '''Optional''' and '''AES CM 128 HMAC SHA1 80'''.
# Set '''STUN''' to '''stun.innovaphone.com'''.
# Select '''Save'''.
# Go to the '''Status''' tab and verify that the configured extensions have registered correctly.

===== '''Configuration of the innovaphone user objects in innovaphone myApps''' =====

# Open the '''Users Admin App'''.
# Create the user account for the Algo device. In this example we created a User account for Algo8180 and Algo8181.
# In the '''Devices''' table of the user account, make sure the '''hardware ID''' is the same as the '''Authentication ID''' used in the Algo device.
# Ensure that '''Reverse Proxy''' and '''Media Relay''' are enabled.
# Registration of the Algo device can then be checked within the innovaphone system.

====== Device scope note ======
The same SIP registration workflow applies across Algo IP speakers, paging adapters, visual alerters, and intercoms. Device-specific behaviour and options depend on the endpoint type. For example, the 8301 may additionally use analog paging output, multicast, relay I/O, scheduling, and music input, while other devices may use visual alerting, local audio behaviour, or intercom-specific functions.
* Algo 8301 SIP registration settings
* paging behavior and extension mapping
* multicast settings, if used
* audio output connection to amplifier
* relay input / output use, if applicable
* any deployment notes, limitations, or prerequisites identified during testing

==Summary==
The Algo 8301 IP Paging Adapter & Scheduler provides a practical bridge between legacy analog paging infrastructure and modern IP-based communication systems. It enables organizations to preserve existing amplifier and speaker investments while adding SIP paging, scheduling, multicast distribution, and emergency notification capabilities. Final interoperability details with innovaphone will be updated after test validation and configuration review.

==Contact==
{|
| Algo Communication Products Ltd.
|-
| Burnaby, BC, Canada
|-
| Tel: +1 604-454-3790
|-
| Support: +1 604-454-3792
|-
| Mail: [mailto:info@algosolutions.com info@algosolutions.com]
|}

For additional information please refer to [https://www.algosolutions.com/contact-us/ our contact page].

Howto:Algo 8301 IP Paging Adapter - Algo - 3rd Party Product

2026-04-27T23:43:15Z

Algo: /* Version */

Howto:Algo 8301 IP Paging Adapter - Algo - 3rd Party Product

2026-04-27T23:40:28Z

Algo: /* innovaphone Reverse Proxy ready */

Howto:Algo 8301 IP Paging Adapter - Algo - 3rd Party Product

2026-04-27T23:37:58Z

Algo: /* Functions */

Howto:Algo 8301 IP Paging Adapter - Algo - 3rd Party Product

2026-04-27T23:36:36Z

Algo: /* Vendor */

Howto:Algo 8301 IP Paging Adapter - Algo - 3rd Party Product

2026-04-27T23:35:39Z

Algo: /* Certification Status */

Howto:Algo 8301 IP Paging Adapter - Algo - 3rd Party Product

2026-04-27T23:04:47Z

Algo: /* Contact */

[[Image:AlgosolutionsLogo.png|200px|right|algosolutionslogo.png/|/AlgosolutionsLogo.png]]
==Product Name==
Algo [https://www.algosolutions.com/product/8301-ip-paging-adapter-scheduler/ 8301 IP Paging Adapter & Scheduler]

==Certification Status==


==Category==

[[Category:Referral Product|{{PAGENAME}}]]
{{Category:3rdParty_Terminal_Devices}}
[[Category:3rdParty Terminal Devices|{{PAGENAME}}]]

==Vendor==
Algo Communication Products Ltd. is a manufacturer of network-based IP endpoints for voice paging, emergency alerting, visual notification, intercom, and secure door entry applications. Algo products are designed for integration with unified communications, collaboration, and mass notification platforms. The company’s portfolio includes IP speakers, paging adapters, intercoms, visual alerters, display speakers, and endpoint management tools for commercial, education, healthcare, transportation, and industrial environments.

==Description==
The Algo 8301 IP Paging Adapter & Scheduler is a wideband SIP paging adapter designed to connect traditional analog amplifiers and legacy paging infrastructure to modern IP-based communication environments.

The 8301 emulates a page port similar to what is found on a legacy PBX or key system, allowing a traditional amplifier to be integrated into a VoIP or unified communications environment. This enables organizations to retain existing analog speaker infrastructure while adding SIP paging, multicast distribution, scheduled bells, automated announcements, emergency notifications, and other IP-based communication capabilities.

The device includes a balanced and isolated line output to reduce hum and noise when connected to an amplifier, and it also supports multicast audio transmission to additional Algo IP endpoints and compatible multicast-enabled phones. The 8301 is appropriate for education, retail, manufacturing, transportation, healthcare, and other environments where hybrid analog and IP paging is required.

==Functions==
The Algo 8301 IP Paging Adapter & Scheduler supports a range of functions for paging, alerting, scheduling, and hybrid analog/IP deployments.

Core functions include:
* SIP-based voice paging through registration as a 3rd-party SIP endpoint
* Integration of traditional analog amplifiers into IP and UC environments
* Scheduled bells, tones, and automated announcements synchronized to NTP
* Emergency, safety, security, and customer service audio notifications
* Multicast transmission to Algo IP speakers, paging adapters, display speakers, and compatible multicast-enabled phones
* Ring, page, and alert extension support
* Relay input and relay output support for connected accessories and external triggers
* Music input and background audio distribution
* Web interface configuration and centralized provisioning support

The 8301 can be deployed either as a SIP extension or as a multicast endpoint, depending on the communication design. In hybrid systems, it can provide local analog paging output while simultaneously distributing audio to IP endpoints over the network.

==innovaphone CTI ready==
n.a.

==innovaphone Reverse Proxy ready==
Yes, the tests has been performed on an innovaphone myApps Cloud environment with registration via the cloud reverse proxy. In the innovaphone PBX onn the users object hardware ID, media relay needs to be activated.

* STUN yes
* TURN no
* ICE no
* SIP/TCP yes
* SIP UDP yes (not tested)
* SIP/TLS yes (not tested)

==innovaphone WebRTC ready==
n.a.

==Supported Codecs==

* G.722 yes
* G.711 A-law yes
* G.711 u-law yes

==DTMF Support==


* RTP DTMF (RFC2833)

==Supports RFC3261 Digest Authentication Scheme (Section 22.4)==



==Support LDAP Phonebook==
n.a.

==Version==
Product versions used for interop testing:
* Algo 8301 IP Paging Adapter & Scheduler: version to be confirmed!
* innovaphone firmware / software version: innovaphone myApps Cloud IPVA, V15r1sr11

==Configuration==
Configuration details will be completed based on the validated test setup.

The planned configuration section will include:
* innovaphone-side SIP configuration
* Algo 8301 SIP registration settings
* paging behavior and extension mapping
* multicast settings, if used
* audio output connection to amplifier
* relay input / output use, if applicable
* any deployment notes, limitations, or prerequisites identified during testing

==Summary==
The Algo 8301 IP Paging Adapter & Scheduler provides a practical bridge between legacy analog paging infrastructure and modern IP-based communication systems. It enables organizations to preserve existing amplifier and speaker investments while adding SIP paging, scheduling, multicast distribution, and emergency notification capabilities. Final interoperability details with innovaphone will be updated after test validation and configuration review.

==Contact==
{|
| Algo Communication Products Ltd.
|-
| Burnaby, BC, Canada
|-
| Tel: +1 604-454-3790
|-
| Support: +1 604-454-3792
|-
| Mail: [mailto:info@algosolutions.com info@algosolutions.com]
|}

For additional information please refer to [https://www.algosolutions.com/contact-us/ our contact page].