innovaphone wiki - User contributions [en]

Howto:Belgacall - Spike Technics - SIP Provider

2014-09-01T10:37:39Z

Joostlauwen: /* SIP TRUNK */

[[Image:3rdPartyGoldfischglas 03.png|right]]

'''Innovaphone Compatibility Test Report'''

== Summary ==

'''SIP Provider: Spike Technics'''

The provider was tested by the provider ''Spike Technics''. This product is listed due to a customer testimonial. No tests have been conducted by innovaphone.

The provider supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F#SIP_Provider|recommended SIP Provider]].

The provider doesn't support Redundancy scenarios with multiple SIP-trunks(master & standby) registered at one account.

That being said, the provider has achieved 94% of all possible test points. For more information on the test rating, please refer to [[Howto:SIP_Interop_Test_Description#|Test Description]]

* Features:

** Direct Dial In
** Fax over IP (T.38)
** DTMF

* Supported Codecs by the provider
** G711
** G729
** T.38 UDP

== Current test state ==


{{Template:Compat Status "in progress"}}









== Testing Enviroment ==

[[Image:ip305.jpg]]

== Test Results ==

We have tested our Hosted PBX solution in combination with the Innovaphone IP305, FW: 10.00 sr8 IP305[10.1037], Bootcode[101037], Hardware[401].

For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|'''call using g711a'''
|OK
|----
|'''call using g711u'''
|OK
|----
|call using g723
|NA
|----
|call using g729
|OK
|----
|call using g722
|NA
|----
|Overlapped sending
|Nok
|----
|'''early media channel'''
|OK
|----
|Fax using T.38
|OK
|----
|T.38 Transcoding by the provider
|OK
|----
|Reverse Media Negotiation
|OK
|----
|CGPN can be suppressed
|OK
|----
|CLIP no screening
|OK
|----
|'''Long time call possible(>30 min)'''
|OK
|----
|'''External Transfer'''
|OK
|----
|NAT Detection
|OK
|----
|Redundancy
|NA
|----
|SIP over TCP
|OK
|----
|'''Voice Quality OK?'''
|OK
|}

=== Direct Dial In ===

{| border="1"
!Tested feature
!Result
|----
|'''Inbound(Provider -> Innovaphone)'''
|OK
|----
|'''Outbound(Innovaphone -> Provider)'''
|OK
|----
|'''Loop In call(Innovaphone -> Provider -> Innovaphone)'''
|OK
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|'''DTMF tones sent correctly via RTP-events(RFC 2833)'''
|OK
|----
|DTMF tones sent correctly via SIP-Info
|OK
|----
|'''DTMF tones received correctly via RTP-events(RFC 2833)'''
|OK
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be put on hold'''
|OK
|----
|Held end hears music on hold / announcement from PBX
|OK
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|OK
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold or dialling tone
|OK
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|OK
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Result
|----
|Call can be transferred
|OK
|----
|Held end hears dialling tone
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MOH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|OK
|}

=== CFU / CFB Transfer ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

=== CFNR / Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred or forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|'''Caller can make a call to a Broadcast Group'''
|OK
|----
|'''Caller can make a call to a Waiting Queue'''
|OK
|----
|'''Announcement if nobody picks up the call'''
|OK
|}

== Configuration ==

=== Interfaces ===
[[Image:interfaces.png]]

=== SIP TRUNK ===
[[Image:siptrunk.jpg]]

=== NUMBERS ROUTES IN THE NETHERLANDS ===
[[Image:numberroutesnl.jpg]]

Howto:Belgacall - Spike Technics - SIP Provider

2014-09-01T10:37:28Z

Joostlauwen: /* SIP TRUNK */

[[Image:3rdPartyGoldfischglas 03.png|right]]

'''Innovaphone Compatibility Test Report'''

== Summary ==

'''SIP Provider: Spike Technics'''

The provider was tested by the provider ''Spike Technics''. This product is listed due to a customer testimonial. No tests have been conducted by innovaphone.

The provider supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F#SIP_Provider|recommended SIP Provider]].

The provider doesn't support Redundancy scenarios with multiple SIP-trunks(master & standby) registered at one account.

That being said, the provider has achieved 94% of all possible test points. For more information on the test rating, please refer to [[Howto:SIP_Interop_Test_Description#|Test Description]]

* Features:

** Direct Dial In
** Fax over IP (T.38)
** DTMF

* Supported Codecs by the provider
** G711
** G729
** T.38 UDP

== Current test state ==


{{Template:Compat Status "in progress"}}









== Testing Enviroment ==

[[Image:ip305.jpg]]

== Test Results ==

We have tested our Hosted PBX solution in combination with the Innovaphone IP305, FW: 10.00 sr8 IP305[10.1037], Bootcode[101037], Hardware[401].

For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|'''call using g711a'''
|OK
|----
|'''call using g711u'''
|OK
|----
|call using g723
|NA
|----
|call using g729
|OK
|----
|call using g722
|NA
|----
|Overlapped sending
|Nok
|----
|'''early media channel'''
|OK
|----
|Fax using T.38
|OK
|----
|T.38 Transcoding by the provider
|OK
|----
|Reverse Media Negotiation
|OK
|----
|CGPN can be suppressed
|OK
|----
|CLIP no screening
|OK
|----
|'''Long time call possible(>30 min)'''
|OK
|----
|'''External Transfer'''
|OK
|----
|NAT Detection
|OK
|----
|Redundancy
|NA
|----
|SIP over TCP
|OK
|----
|'''Voice Quality OK?'''
|OK
|}

=== Direct Dial In ===

{| border="1"
!Tested feature
!Result
|----
|'''Inbound(Provider -> Innovaphone)'''
|OK
|----
|'''Outbound(Innovaphone -> Provider)'''
|OK
|----
|'''Loop In call(Innovaphone -> Provider -> Innovaphone)'''
|OK
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|'''DTMF tones sent correctly via RTP-events(RFC 2833)'''
|OK
|----
|DTMF tones sent correctly via SIP-Info
|OK
|----
|'''DTMF tones received correctly via RTP-events(RFC 2833)'''
|OK
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be put on hold'''
|OK
|----
|Held end hears music on hold / announcement from PBX
|OK
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|OK
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold or dialling tone
|OK
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|OK
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Result
|----
|Call can be transferred
|OK
|----
|Held end hears dialling tone
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MOH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|OK
|}

=== CFU / CFB Transfer ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

=== CFNR / Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred or forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|'''Caller can make a call to a Broadcast Group'''
|OK
|----
|'''Caller can make a call to a Waiting Queue'''
|OK
|----
|'''Announcement if nobody picks up the call'''
|OK
|}

== Configuration ==

=== SIP TRUNK ===
[[Image:interfaces.png]]

=== SIP TRUNK ===
[[Image:siptrunk.jpg]]

=== NUMBERS ROUTES IN THE NETHERLANDS ===
[[Image:numberroutesnl.jpg]]

File:Interfaces.png

2014-09-01T10:37:00Z

Joostlauwen:

Howto:Belgacall - Spike Technics - SIP Provider

2014-09-01T10:36:03Z

Joostlauwen: /* SIP TRUNK */

[[Image:3rdPartyGoldfischglas 03.png|right]]

'''Innovaphone Compatibility Test Report'''

== Summary ==

'''SIP Provider: Spike Technics'''

The provider was tested by the provider ''Spike Technics''. This product is listed due to a customer testimonial. No tests have been conducted by innovaphone.

The provider supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F#SIP_Provider|recommended SIP Provider]].

The provider doesn't support Redundancy scenarios with multiple SIP-trunks(master & standby) registered at one account.

That being said, the provider has achieved 94% of all possible test points. For more information on the test rating, please refer to [[Howto:SIP_Interop_Test_Description#|Test Description]]

* Features:

** Direct Dial In
** Fax over IP (T.38)
** DTMF

* Supported Codecs by the provider
** G711
** G729
** T.38 UDP

== Current test state ==


{{Template:Compat Status "in progress"}}









== Testing Enviroment ==

[[Image:ip305.jpg]]

== Test Results ==

We have tested our Hosted PBX solution in combination with the Innovaphone IP305, FW: 10.00 sr8 IP305[10.1037], Bootcode[101037], Hardware[401].

For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|'''call using g711a'''
|OK
|----
|'''call using g711u'''
|OK
|----
|call using g723
|NA
|----
|call using g729
|OK
|----
|call using g722
|NA
|----
|Overlapped sending
|Nok
|----
|'''early media channel'''
|OK
|----
|Fax using T.38
|OK
|----
|T.38 Transcoding by the provider
|OK
|----
|Reverse Media Negotiation
|OK
|----
|CGPN can be suppressed
|OK
|----
|CLIP no screening
|OK
|----
|'''Long time call possible(>30 min)'''
|OK
|----
|'''External Transfer'''
|OK
|----
|NAT Detection
|OK
|----
|Redundancy
|NA
|----
|SIP over TCP
|OK
|----
|'''Voice Quality OK?'''
|OK
|}

=== Direct Dial In ===

{| border="1"
!Tested feature
!Result
|----
|'''Inbound(Provider -> Innovaphone)'''
|OK
|----
|'''Outbound(Innovaphone -> Provider)'''
|OK
|----
|'''Loop In call(Innovaphone -> Provider -> Innovaphone)'''
|OK
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|'''DTMF tones sent correctly via RTP-events(RFC 2833)'''
|OK
|----
|DTMF tones sent correctly via SIP-Info
|OK
|----
|'''DTMF tones received correctly via RTP-events(RFC 2833)'''
|OK
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be put on hold'''
|OK
|----
|Held end hears music on hold / announcement from PBX
|OK
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|OK
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold or dialling tone
|OK
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|OK
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Result
|----
|Call can be transferred
|OK
|----
|Held end hears dialling tone
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MOH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|OK
|}

=== CFU / CFB Transfer ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

=== CFNR / Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred or forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|'''Caller can make a call to a Broadcast Group'''
|OK
|----
|'''Caller can make a call to a Waiting Queue'''
|OK
|----
|'''Announcement if nobody picks up the call'''
|OK
|}

== Configuration ==

=== SIP TRUNK ===
[[Image:interfaces.jpg]]

=== SIP TRUNK ===
[[Image:siptrunk.jpg]]

=== NUMBERS ROUTES IN THE NETHERLANDS ===
[[Image:numberroutesnl.jpg]]

Howto:Belgacall - Spike Technics - SIP Provider

2014-09-01T10:21:03Z

Joostlauwen: /* Test Results */

[[Image:3rdPartyGoldfischglas 03.png|right]]

'''Innovaphone Compatibility Test Report'''

== Summary ==

'''SIP Provider: Spike Technics'''

The provider was tested by the provider ''Spike Technics''. This product is listed due to a customer testimonial. No tests have been conducted by innovaphone.

The provider supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F#SIP_Provider|recommended SIP Provider]].

The provider doesn't support Redundancy scenarios with multiple SIP-trunks(master & standby) registered at one account.

That being said, the provider has achieved 94% of all possible test points. For more information on the test rating, please refer to [[Howto:SIP_Interop_Test_Description#|Test Description]]

* Features:

** Direct Dial In
** Fax over IP (T.38)
** DTMF

* Supported Codecs by the provider
** G711
** G729
** T.38 UDP

== Current test state ==


{{Template:Compat Status "in progress"}}









== Testing Enviroment ==

[[Image:ip305.jpg]]

== Test Results ==

We have tested our Hosted PBX solution in combination with the Innovaphone IP305, FW: 10.00 sr8 IP305[10.1037], Bootcode[101037], Hardware[401].

For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|'''call using g711a'''
|OK
|----
|'''call using g711u'''
|OK
|----
|call using g723
|NA
|----
|call using g729
|OK
|----
|call using g722
|NA
|----
|Overlapped sending
|Nok
|----
|'''early media channel'''
|OK
|----
|Fax using T.38
|OK
|----
|T.38 Transcoding by the provider
|OK
|----
|Reverse Media Negotiation
|OK
|----
|CGPN can be suppressed
|OK
|----
|CLIP no screening
|OK
|----
|'''Long time call possible(>30 min)'''
|OK
|----
|'''External Transfer'''
|OK
|----
|NAT Detection
|OK
|----
|Redundancy
|NA
|----
|SIP over TCP
|OK
|----
|'''Voice Quality OK?'''
|OK
|}

=== Direct Dial In ===

{| border="1"
!Tested feature
!Result
|----
|'''Inbound(Provider -> Innovaphone)'''
|OK
|----
|'''Outbound(Innovaphone -> Provider)'''
|OK
|----
|'''Loop In call(Innovaphone -> Provider -> Innovaphone)'''
|OK
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|'''DTMF tones sent correctly via RTP-events(RFC 2833)'''
|OK
|----
|DTMF tones sent correctly via SIP-Info
|OK
|----
|'''DTMF tones received correctly via RTP-events(RFC 2833)'''
|OK
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be put on hold'''
|OK
|----
|Held end hears music on hold / announcement from PBX
|OK
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|OK
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold or dialling tone
|OK
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|OK
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Result
|----
|Call can be transferred
|OK
|----
|Held end hears dialling tone
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MOH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|OK
|}

=== CFU / CFB Transfer ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

=== CFNR / Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred or forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|'''Caller can make a call to a Broadcast Group'''
|OK
|----
|'''Caller can make a call to a Waiting Queue'''
|OK
|----
|'''Announcement if nobody picks up the call'''
|OK
|}

== Configuration ==

=== SIP TRUNK ===
[[Image:siptrunk.jpg]]

=== NUMBERS ROUTES IN THE NETHERLANDS ===
[[Image:numberroutesnl.jpg]]

File:Ip305.jpg

2014-09-01T10:19:25Z

Joostlauwen:

Howto:Belgacall - Spike Technics - SIP Provider

2014-09-01T10:19:15Z

Joostlauwen: /* Testing Enviroment */

[[Image:3rdPartyGoldfischglas 03.png|right]]

'''Innovaphone Compatibility Test Report'''

== Summary ==

'''SIP Provider: Spike Technics'''

The provider was tested by the provider ''Spike Technics''. This product is listed due to a customer testimonial. No tests have been conducted by innovaphone.

The provider supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F#SIP_Provider|recommended SIP Provider]].

The provider doesn't support Redundancy scenarios with multiple SIP-trunks(master & standby) registered at one account.

That being said, the provider has achieved 94% of all possible test points. For more information on the test rating, please refer to [[Howto:SIP_Interop_Test_Description#|Test Description]]

* Features:

** Direct Dial In
** Fax over IP (T.38)
** DTMF

* Supported Codecs by the provider
** G711
** G729
** T.38 UDP

== Current test state ==


{{Template:Compat Status "in progress"}}









== Testing Enviroment ==

[[Image:ip305.jpg]]

== Test Results ==

For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|'''call using g711a'''
|OK
|----
|'''call using g711u'''
|OK
|----
|call using g723
|NA
|----
|call using g729
|OK
|----
|call using g722
|NA
|----
|Overlapped sending
|Nok
|----
|'''early media channel'''
|OK
|----
|Fax using T.38
|OK
|----
|T.38 Transcoding by the provider
|OK
|----
|Reverse Media Negotiation
|OK
|----
|CGPN can be suppressed
|OK
|----
|CLIP no screening
|OK
|----
|'''Long time call possible(>30 min)'''
|OK
|----
|'''External Transfer'''
|OK
|----
|NAT Detection
|OK
|----
|Redundancy
|NA
|----
|SIP over TCP
|OK
|----
|'''Voice Quality OK?'''
|OK
|}

=== Direct Dial In ===

{| border="1"
!Tested feature
!Result
|----
|'''Inbound(Provider -> Innovaphone)'''
|OK
|----
|'''Outbound(Innovaphone -> Provider)'''
|OK
|----
|'''Loop In call(Innovaphone -> Provider -> Innovaphone)'''
|OK
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|'''DTMF tones sent correctly via RTP-events(RFC 2833)'''
|OK
|----
|DTMF tones sent correctly via SIP-Info
|OK
|----
|'''DTMF tones received correctly via RTP-events(RFC 2833)'''
|OK
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be put on hold'''
|OK
|----
|Held end hears music on hold / announcement from PBX
|OK
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|OK
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold or dialling tone
|OK
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|OK
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Result
|----
|Call can be transferred
|OK
|----
|Held end hears dialling tone
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MOH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|OK
|}

=== CFU / CFB Transfer ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

=== CFNR / Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred or forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|'''Caller can make a call to a Broadcast Group'''
|OK
|----
|'''Caller can make a call to a Waiting Queue'''
|OK
|----
|'''Announcement if nobody picks up the call'''
|OK
|}

== Configuration ==

=== SIP TRUNK ===
[[Image:siptrunk.jpg]]

=== NUMBERS ROUTES IN THE NETHERLANDS ===
[[Image:numberroutesnl.jpg]]

Howto:Belgacall - Spike Technics - SIP Provider

2014-09-01T10:00:03Z

Joostlauwen: /* Transfer with consultation (alerting only) */

[[Image:3rdPartyGoldfischglas 03.png|right]]

'''Innovaphone Compatibility Test Report'''

== Summary ==

'''SIP Provider: Spike Technics'''

The provider was tested by the provider ''Spike Technics''. This product is listed due to a customer testimonial. No tests have been conducted by innovaphone.

The provider supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F#SIP_Provider|recommended SIP Provider]].

The provider doesn't support Redundancy scenarios with multiple SIP-trunks(master & standby) registered at one account.

That being said, the provider has achieved 94% of all possible test points. For more information on the test rating, please refer to [[Howto:SIP_Interop_Test_Description#|Test Description]]

* Features:

** Direct Dial In
** Fax over IP (T.38)
** DTMF

* Supported Codecs by the provider
** G711
** G729
** T.38 UDP

== Current test state ==


{{Template:Compat Status "in progress"}}









== Testing Enviroment ==

[[Image:SIPProviderTestTopology1.JPG]]

== Test Results ==

For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|'''call using g711a'''
|OK
|----
|'''call using g711u'''
|OK
|----
|call using g723
|NA
|----
|call using g729
|OK
|----
|call using g722
|NA
|----
|Overlapped sending
|Nok
|----
|'''early media channel'''
|OK
|----
|Fax using T.38
|OK
|----
|T.38 Transcoding by the provider
|OK
|----
|Reverse Media Negotiation
|OK
|----
|CGPN can be suppressed
|OK
|----
|CLIP no screening
|OK
|----
|'''Long time call possible(>30 min)'''
|OK
|----
|'''External Transfer'''
|OK
|----
|NAT Detection
|OK
|----
|Redundancy
|NA
|----
|SIP over TCP
|OK
|----
|'''Voice Quality OK?'''
|OK
|}

=== Direct Dial In ===

{| border="1"
!Tested feature
!Result
|----
|'''Inbound(Provider -> Innovaphone)'''
|OK
|----
|'''Outbound(Innovaphone -> Provider)'''
|OK
|----
|'''Loop In call(Innovaphone -> Provider -> Innovaphone)'''
|OK
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|'''DTMF tones sent correctly via RTP-events(RFC 2833)'''
|OK
|----
|DTMF tones sent correctly via SIP-Info
|OK
|----
|'''DTMF tones received correctly via RTP-events(RFC 2833)'''
|OK
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be put on hold'''
|OK
|----
|Held end hears music on hold / announcement from PBX
|OK
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|OK
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold or dialling tone
|OK
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|OK
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Result
|----
|Call can be transferred
|OK
|----
|Held end hears dialling tone
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MOH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|OK
|}

=== CFU / CFB Transfer ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

=== CFNR / Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred or forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|'''Caller can make a call to a Broadcast Group'''
|OK
|----
|'''Caller can make a call to a Waiting Queue'''
|OK
|----
|'''Announcement if nobody picks up the call'''
|OK
|}

== Configuration ==

=== SIP TRUNK ===
[[Image:siptrunk.jpg]]

=== NUMBERS ROUTES IN THE NETHERLANDS ===
[[Image:numberroutesnl.jpg]]

Howto:Belgacall - Spike Technics - SIP Provider

2014-08-27T14:20:34Z

Joostlauwen: /* Transfer with consultation (alerting only) */

[[Image:3rdPartyGoldfischglas 03.png|right]]

'''Innovaphone Compatibility Test Report'''

== Summary ==

'''SIP Provider: Spike Technics'''


== Current test state ==


{{Template:Compat Status "in progress"}}









== Testing Enviroment ==

[[Image:SIPProviderTestTopology1.JPG]]

== Test Results ==

For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|'''call using g711a'''
|OK
|----
|'''call using g711u'''
|OK
|----
|call using g723
|NA
|----
|call using g729
|OK
|----
|call using g722
|NA
|----
|Overlapped sending
|Nok
|----
|'''early media channel'''
|OK
|----
|Fax using T.38
|OK
|----
|T.38 Transcoding by the provider
|OK
|----
|Reverse Media Negotiation
|OK
|----
|CGPN can be suppressed
|OK
|----
|CLIP no screening
|OK
|----
|'''Long time call possible(>30 min)'''
|OK
|----
|'''External Transfer'''
|OK
|----
|NAT Detection
|OK
|----
|Redundancy
|NA
|----
|SIP over TCP
|OK
|----
|'''Voice Quality OK?'''
|OK
|}

=== Direct Dial In ===

{| border="1"
!Tested feature
!Result
|----
|'''Inbound(Provider -> Innovaphone)'''
|OK
|----
|'''Outbound(Innovaphone -> Provider)'''
|OK
|----
|'''Loop In call(Innovaphone -> Provider -> Innovaphone)'''
|OK
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|'''DTMF tones sent correctly via RTP-events(RFC 2833)'''
|OK
|----
|DTMF tones sent correctly via SIP-Info
|OK
|----
|'''DTMF tones received correctly via RTP-events(RFC 2833)'''
|OK
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be put on hold'''
|OK
|----
|Held end hears music on hold / announcement from PBX
|OK
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|OK
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold or dialling tone
|OK
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Result
|----
|Call can be transferred
|OK
|----
|Held end hears dialling tone
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MOH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|OK
|}

=== CFU / CFB Transfer ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

=== CFNR / Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred or forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|'''Caller can make a call to a Broadcast Group'''
|OK
|----
|'''Caller can make a call to a Waiting Queue'''
|OK
|----
|'''Announcement if nobody picks up the call'''
|OK
|}

== Configuration ==

=== SIP TRUNK ===
[[Image:siptrunk.jpg]]

=== NUMBERS ROUTES IN THE NETHERLANDS ===
[[Image:numberroutesnl.jpg]]

File:Numberroutesnl.jpg

2014-08-27T14:19:30Z

Joostlauwen:

Howto:Belgacall - Spike Technics - SIP Provider

2014-08-27T14:19:16Z

Joostlauwen: /* SIP TRUNK */

[[Image:3rdPartyGoldfischglas 03.png|right]]

'''Innovaphone Compatibility Test Report'''

== Summary ==

'''SIP Provider: Spike Technics'''


== Current test state ==


{{Template:Compat Status "in progress"}}









== Testing Enviroment ==

[[Image:SIPProviderTestTopology1.JPG]]

== Test Results ==

For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|'''call using g711a'''
|OK
|----
|'''call using g711u'''
|OK
|----
|call using g723
|NA
|----
|call using g729
|OK
|----
|call using g722
|NA
|----
|Overlapped sending
|Nok
|----
|'''early media channel'''
|OK
|----
|Fax using T.38
|OK
|----
|T.38 Transcoding by the provider
|OK
|----
|Reverse Media Negotiation
|OK
|----
|CGPN can be suppressed
|OK
|----
|CLIP no screening
|OK
|----
|'''Long time call possible(>30 min)'''
|OK
|----
|'''External Transfer'''
|OK
|----
|NAT Detection
|OK
|----
|Redundancy
|NA
|----
|SIP over TCP
|OK
|----
|'''Voice Quality OK?'''
|OK
|}

=== Direct Dial In ===

{| border="1"
!Tested feature
!Result
|----
|'''Inbound(Provider -> Innovaphone)'''
|OK
|----
|'''Outbound(Innovaphone -> Provider)'''
|OK
|----
|'''Loop In call(Innovaphone -> Provider -> Innovaphone)'''
|OK
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|'''DTMF tones sent correctly via RTP-events(RFC 2833)'''
|OK
|----
|DTMF tones sent correctly via SIP-Info
|OK
|----
|'''DTMF tones received correctly via RTP-events(RFC 2833)'''
|OK
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be put on hold'''
|OK
|----
|Held end hears music on hold / announcement from PBX
|OK
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|OK
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold or dialling tone
|OK
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|Not Tested
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Result
|----
|Call can be transferred
|OK
|----
|Held end hears dialling tone
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MOH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|OK
|}

=== CFU / CFB Transfer ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

=== CFNR / Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred or forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|'''Caller can make a call to a Broadcast Group'''
|OK
|----
|'''Caller can make a call to a Waiting Queue'''
|OK
|----
|'''Announcement if nobody picks up the call'''
|OK
|}

== Configuration ==

=== SIP TRUNK ===
[[Image:siptrunk.jpg]]

=== NUMBERS ROUTES IN THE NETHERLANDS ===
[[Image:numberroutesnl.jpg]]

Howto:Belgacall - Spike Technics - SIP Provider

2014-08-27T14:17:03Z

Joostlauwen: /* CFU / CFB Transfer */

[[Image:3rdPartyGoldfischglas 03.png|right]]

'''Innovaphone Compatibility Test Report'''

== Summary ==

'''SIP Provider: Spike Technics'''


== Current test state ==


{{Template:Compat Status "in progress"}}









== Testing Enviroment ==

[[Image:SIPProviderTestTopology1.JPG]]

== Test Results ==

For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|'''call using g711a'''
|OK
|----
|'''call using g711u'''
|OK
|----
|call using g723
|NA
|----
|call using g729
|OK
|----
|call using g722
|NA
|----
|Overlapped sending
|Nok
|----
|'''early media channel'''
|OK
|----
|Fax using T.38
|OK
|----
|T.38 Transcoding by the provider
|OK
|----
|Reverse Media Negotiation
|OK
|----
|CGPN can be suppressed
|OK
|----
|CLIP no screening
|OK
|----
|'''Long time call possible(>30 min)'''
|OK
|----
|'''External Transfer'''
|OK
|----
|NAT Detection
|OK
|----
|Redundancy
|NA
|----
|SIP over TCP
|OK
|----
|'''Voice Quality OK?'''
|OK
|}

=== Direct Dial In ===

{| border="1"
!Tested feature
!Result
|----
|'''Inbound(Provider -> Innovaphone)'''
|OK
|----
|'''Outbound(Innovaphone -> Provider)'''
|OK
|----
|'''Loop In call(Innovaphone -> Provider -> Innovaphone)'''
|OK
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|'''DTMF tones sent correctly via RTP-events(RFC 2833)'''
|OK
|----
|DTMF tones sent correctly via SIP-Info
|OK
|----
|'''DTMF tones received correctly via RTP-events(RFC 2833)'''
|OK
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be put on hold'''
|OK
|----
|Held end hears music on hold / announcement from PBX
|OK
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|OK
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold or dialling tone
|OK
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|Not Tested
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Result
|----
|Call can be transferred
|OK
|----
|Held end hears dialling tone
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MOH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|OK
|}

=== CFU / CFB Transfer ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

=== CFNR / Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred or forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|'''Caller can make a call to a Broadcast Group'''
|OK
|----
|'''Caller can make a call to a Waiting Queue'''
|OK
|----
|'''Announcement if nobody picks up the call'''
|OK
|}

== Configuration ==

=== SIP TRUNK ===
[[Image:siptrunk.jpg]]

File:Siptrunk.jpg

2014-08-27T14:15:33Z

Joostlauwen:

Howto:Belgacall - Spike Technics - SIP Provider

2014-08-27T14:15:17Z

Joostlauwen: /* Configuration */

[[Image:3rdPartyGoldfischglas 03.png|right]]

'''Innovaphone Compatibility Test Report'''

== Summary ==

'''SIP Provider: Spike Technics'''


== Current test state ==


{{Template:Compat Status "in progress"}}









== Testing Enviroment ==

[[Image:SIPProviderTestTopology1.JPG]]

== Test Results ==

For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|'''call using g711a'''
|OK
|----
|'''call using g711u'''
|OK
|----
|call using g723
|NA
|----
|call using g729
|OK
|----
|call using g722
|NA
|----
|Overlapped sending
|Nok
|----
|'''early media channel'''
|OK
|----
|Fax using T.38
|OK
|----
|T.38 Transcoding by the provider
|OK
|----
|Reverse Media Negotiation
|OK
|----
|CGPN can be suppressed
|OK
|----
|CLIP no screening
|OK
|----
|'''Long time call possible(>30 min)'''
|OK
|----
|'''External Transfer'''
|OK
|----
|NAT Detection
|OK
|----
|Redundancy
|NA
|----
|SIP over TCP
|OK
|----
|'''Voice Quality OK?'''
|OK
|}

=== Direct Dial In ===

{| border="1"
!Tested feature
!Result
|----
|'''Inbound(Provider -> Innovaphone)'''
|OK
|----
|'''Outbound(Innovaphone -> Provider)'''
|OK
|----
|'''Loop In call(Innovaphone -> Provider -> Innovaphone)'''
|OK
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|'''DTMF tones sent correctly via RTP-events(RFC 2833)'''
|OK
|----
|DTMF tones sent correctly via SIP-Info
|OK
|----
|'''DTMF tones received correctly via RTP-events(RFC 2833)'''
|OK
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be put on hold'''
|OK
|----
|Held end hears music on hold / announcement from PBX
|OK
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|OK
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold or dialling tone
|OK
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|Not Tested
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Result
|----
|Call can be transferred
|OK
|----
|Held end hears dialling tone
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MOH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|OK
|}

=== CFU / CFB Transfer ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

=== CFNR / Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred or forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|'''Caller can make a call to a Broadcast Group'''
|OK
|----
|'''Caller can make a call to a Waiting Queue'''
|OK
|----
|'''Announcement if nobody picks up the call'''
|OK
|}

== Configuration ==

=== CFU / CFB Transfer ===
[[Image:siptrunk.jpg]]

Howto:Belgacall - Spike Technics - SIP Provider

2014-08-27T14:14:38Z

Joostlauwen: /* Configuration */

[[Image:3rdPartyGoldfischglas 03.png|right]]

'''Innovaphone Compatibility Test Report'''

== Summary ==

'''SIP Provider: Spike Technics'''


== Current test state ==


{{Template:Compat Status "in progress"}}









== Testing Enviroment ==

[[Image:SIPProviderTestTopology1.JPG]]

== Test Results ==

For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|'''call using g711a'''
|OK
|----
|'''call using g711u'''
|OK
|----
|call using g723
|NA
|----
|call using g729
|OK
|----
|call using g722
|NA
|----
|Overlapped sending
|Nok
|----
|'''early media channel'''
|OK
|----
|Fax using T.38
|OK
|----
|T.38 Transcoding by the provider
|OK
|----
|Reverse Media Negotiation
|OK
|----
|CGPN can be suppressed
|OK
|----
|CLIP no screening
|OK
|----
|'''Long time call possible(>30 min)'''
|OK
|----
|'''External Transfer'''
|OK
|----
|NAT Detection
|OK
|----
|Redundancy
|NA
|----
|SIP over TCP
|OK
|----
|'''Voice Quality OK?'''
|OK
|}

=== Direct Dial In ===

{| border="1"
!Tested feature
!Result
|----
|'''Inbound(Provider -> Innovaphone)'''
|OK
|----
|'''Outbound(Innovaphone -> Provider)'''
|OK
|----
|'''Loop In call(Innovaphone -> Provider -> Innovaphone)'''
|OK
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|'''DTMF tones sent correctly via RTP-events(RFC 2833)'''
|OK
|----
|DTMF tones sent correctly via SIP-Info
|OK
|----
|'''DTMF tones received correctly via RTP-events(RFC 2833)'''
|OK
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be put on hold'''
|OK
|----
|Held end hears music on hold / announcement from PBX
|OK
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|OK
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold or dialling tone
|OK
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|Not Tested
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Result
|----
|Call can be transferred
|OK
|----
|Held end hears dialling tone
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MOH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|OK
|}

=== CFU / CFB Transfer ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

=== CFNR / Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred or forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|'''Caller can make a call to a Broadcast Group'''
|OK
|----
|'''Caller can make a call to a Waiting Queue'''
|OK
|----
|'''Announcement if nobody picks up the call'''
|OK
|}

== Configuration ==

SIP TRUNK
[[Image:siptrunk.jpg]]

Howto:Belgacall - Spike Technics - SIP Provider

2014-08-27T14:13:13Z

Joostlauwen: /* Configuration */

[[Image:3rdPartyGoldfischglas 03.png|right]]

'''Innovaphone Compatibility Test Report'''

== Summary ==

'''SIP Provider: Spike Technics'''


== Current test state ==


{{Template:Compat Status "in progress"}}









== Testing Enviroment ==

[[Image:SIPProviderTestTopology1.JPG]]

== Test Results ==

For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|'''call using g711a'''
|OK
|----
|'''call using g711u'''
|OK
|----
|call using g723
|NA
|----
|call using g729
|OK
|----
|call using g722
|NA
|----
|Overlapped sending
|Nok
|----
|'''early media channel'''
|OK
|----
|Fax using T.38
|OK
|----
|T.38 Transcoding by the provider
|OK
|----
|Reverse Media Negotiation
|OK
|----
|CGPN can be suppressed
|OK
|----
|CLIP no screening
|OK
|----
|'''Long time call possible(>30 min)'''
|OK
|----
|'''External Transfer'''
|OK
|----
|NAT Detection
|OK
|----
|Redundancy
|NA
|----
|SIP over TCP
|OK
|----
|'''Voice Quality OK?'''
|OK
|}

=== Direct Dial In ===

{| border="1"
!Tested feature
!Result
|----
|'''Inbound(Provider -> Innovaphone)'''
|OK
|----
|'''Outbound(Innovaphone -> Provider)'''
|OK
|----
|'''Loop In call(Innovaphone -> Provider -> Innovaphone)'''
|OK
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|'''DTMF tones sent correctly via RTP-events(RFC 2833)'''
|OK
|----
|DTMF tones sent correctly via SIP-Info
|OK
|----
|'''DTMF tones received correctly via RTP-events(RFC 2833)'''
|OK
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be put on hold'''
|OK
|----
|Held end hears music on hold / announcement from PBX
|OK
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|OK
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold or dialling tone
|OK
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|Not Tested
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Result
|----
|Call can be transferred
|OK
|----
|Held end hears dialling tone
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MOH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|OK
|}

=== CFU / CFB Transfer ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

=== CFNR / Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred or forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|'''Caller can make a call to a Broadcast Group'''
|OK
|----
|'''Caller can make a call to a Waiting Queue'''
|OK
|----
|'''Announcement if nobody picks up the call'''
|OK
|}

== Configuration ==

SIP TRUNK
[[Image:Voorbeeld.png]]

File:SIPProviderTestTopology1.JPG

2014-08-25T07:49:26Z

Joostlauwen:

Howto:Belgacall - Spike Technics - SIP Provider

2014-08-25T07:49:11Z

Joostlauwen: /* Testing Enviroment */

[[Image:3rdPartyGoldfischglas 03.png|right]]

'''Innovaphone Compatibility Test Report'''

== Summary ==

'''SIP Provider: Spike Technics'''


== Current test state ==


{{Template:Compat Status "in progress"}}









== Testing Enviroment ==

[[Image:SIPProviderTestTopology1.JPG]]

== Test Results ==

For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|'''call using g711a'''
|OK
|----
|'''call using g711u'''
|OK
|----
|call using g723
|NA
|----
|call using g729
|OK
|----
|call using g722
|NA
|----
|Overlapped sending
|Nok
|----
|'''early media channel'''
|OK
|----
|Fax using T.38
|OK
|----
|T.38 Transcoding by the provider
|OK
|----
|Reverse Media Negotiation
|OK
|----
|CGPN can be suppressed
|OK
|----
|CLIP no screening
|OK
|----
|'''Long time call possible(>30 min)'''
|OK
|----
|'''External Transfer'''
|OK
|----
|NAT Detection
|OK
|----
|Redundancy
|NA
|----
|SIP over TCP
|OK
|----
|'''Voice Quality OK?'''
|OK
|}

=== Direct Dial In ===

{| border="1"
!Tested feature
!Result
|----
|'''Inbound(Provider -> Innovaphone)'''
|OK
|----
|'''Outbound(Innovaphone -> Provider)'''
|OK
|----
|'''Loop In call(Innovaphone -> Provider -> Innovaphone)'''
|OK
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|'''DTMF tones sent correctly via RTP-events(RFC 2833)'''
|OK
|----
|DTMF tones sent correctly via SIP-Info
|OK
|----
|'''DTMF tones received correctly via RTP-events(RFC 2833)'''
|OK
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be put on hold'''
|OK
|----
|Held end hears music on hold / announcement from PBX
|OK
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|OK
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold or dialling tone
|OK
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|Not Tested
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Result
|----
|Call can be transferred
|OK
|----
|Held end hears dialling tone
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MOH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|OK
|}

=== CFU / CFB Transfer ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

=== CFNR / Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred or forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|'''Caller can make a call to a Broadcast Group'''
|OK
|----
|'''Caller can make a call to a Waiting Queue'''
|OK
|----
|'''Announcement if nobody picks up the call'''
|OK
|}

== Configuration ==

File:SIPProviderTestTopology1.jpg

2014-08-25T07:46:01Z

Joostlauwen:

Howto:Belgacall - Spike Technics - SIP Provider

2014-08-25T07:19:46Z

Joostlauwen: /* Blind Transfer */

[[Image:3rdPartyGoldfischglas 03.png|right]]

'''Innovaphone Compatibility Test Report'''

== Summary ==

'''SIP Provider: Spike Technics'''


== Current test state ==


{{Template:Compat Status "in progress"}}









== Testing Enviroment ==

[[Image:SIPProviderTestTopology1.PNG]]

This scenario describes a setup where the PBX and phones are in a private network.

There are 3 major configuration variants of the SIP trunk, which one is used depends on the test results. The variants are:

* the SIP trunk is configured without Media Relay and without exclusive coder. This is the case if all tests were successful
* the SIP trunk is configured with Media Relay and STUN but without exclusive coder. This is the case when the test for "NAT Traversal" fails
* the SIP trunk is configured with Media Relay and exclusive coder. This is the case when the test for "Reverse Media Negotiation" fails

The test scenario should describe which SIP trunk configuration is needed.

== Test Results ==

For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|'''call using g711a'''
|OK
|----
|'''call using g711u'''
|OK
|----
|call using g723
|NA
|----
|call using g729
|OK
|----
|call using g722
|NA
|----
|Overlapped sending
|Nok
|----
|'''early media channel'''
|OK
|----
|Fax using T.38
|OK
|----
|T.38 Transcoding by the provider
|OK
|----
|Reverse Media Negotiation
|OK
|----
|CGPN can be suppressed
|OK
|----
|CLIP no screening
|OK
|----
|'''Long time call possible(>30 min)'''
|OK
|----
|'''External Transfer'''
|OK
|----
|NAT Detection
|OK
|----
|Redundancy
|NA
|----
|SIP over TCP
|OK
|----
|'''Voice Quality OK?'''
|OK
|}

=== Direct Dial In ===

{| border="1"
!Tested feature
!Result
|----
|'''Inbound(Provider -> Innovaphone)'''
|OK
|----
|'''Outbound(Innovaphone -> Provider)'''
|OK
|----
|'''Loop In call(Innovaphone -> Provider -> Innovaphone)'''
|OK
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|'''DTMF tones sent correctly via RTP-events(RFC 2833)'''
|OK
|----
|DTMF tones sent correctly via SIP-Info
|OK
|----
|'''DTMF tones received correctly via RTP-events(RFC 2833)'''
|OK
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be put on hold'''
|OK
|----
|Held end hears music on hold / announcement from PBX
|OK
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|OK
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold or dialling tone
|OK
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|Not Tested
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Result
|----
|Call can be transferred
|OK
|----
|Held end hears dialling tone
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MOH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|OK
|}

=== CFU / CFB Transfer ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

=== CFNR / Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred or forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|'''Caller can make a call to a Broadcast Group'''
|OK
|----
|'''Caller can make a call to a Waiting Queue'''
|OK
|----
|'''Announcement if nobody picks up the call'''
|OK
|}

== Configuration ==

Howto:Belgacall - Spike Technics - SIP Provider

2014-08-25T07:19:23Z

Joostlauwen: /* Blind Transfer */

[[Image:3rdPartyGoldfischglas 03.png|right]]

'''Innovaphone Compatibility Test Report'''

== Summary ==

'''SIP Provider: Spike Technics'''


== Current test state ==


{{Template:Compat Status "in progress"}}









== Testing Enviroment ==

[[Image:SIPProviderTestTopology1.PNG]]

This scenario describes a setup where the PBX and phones are in a private network.

There are 3 major configuration variants of the SIP trunk, which one is used depends on the test results. The variants are:

* the SIP trunk is configured without Media Relay and without exclusive coder. This is the case if all tests were successful
* the SIP trunk is configured with Media Relay and STUN but without exclusive coder. This is the case when the test for "NAT Traversal" fails
* the SIP trunk is configured with Media Relay and exclusive coder. This is the case when the test for "Reverse Media Negotiation" fails

The test scenario should describe which SIP trunk configuration is needed.

== Test Results ==

For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|'''call using g711a'''
|OK
|----
|'''call using g711u'''
|OK
|----
|call using g723
|NA
|----
|call using g729
|OK
|----
|call using g722
|NA
|----
|Overlapped sending
|Nok
|----
|'''early media channel'''
|OK
|----
|Fax using T.38
|OK
|----
|T.38 Transcoding by the provider
|OK
|----
|Reverse Media Negotiation
|OK
|----
|CGPN can be suppressed
|OK
|----
|CLIP no screening
|OK
|----
|'''Long time call possible(>30 min)'''
|OK
|----
|'''External Transfer'''
|OK
|----
|NAT Detection
|OK
|----
|Redundancy
|NA
|----
|SIP over TCP
|OK
|----
|'''Voice Quality OK?'''
|OK
|}

=== Direct Dial In ===

{| border="1"
!Tested feature
!Result
|----
|'''Inbound(Provider -> Innovaphone)'''
|OK
|----
|'''Outbound(Innovaphone -> Provider)'''
|OK
|----
|'''Loop In call(Innovaphone -> Provider -> Innovaphone)'''
|OK
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|'''DTMF tones sent correctly via RTP-events(RFC 2833)'''
|OK
|----
|DTMF tones sent correctly via SIP-Info
|OK
|----
|'''DTMF tones received correctly via RTP-events(RFC 2833)'''
|OK
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be put on hold'''
|OK
|----
|Held end hears music on hold / announcement from PBX
|OK
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|OK
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold or dialling tone
|OK
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|Not Tested
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Result
|----
|Call can be transferred
|OK
|----
|Held end hears dialling tone
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MOH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|
|}

=== CFU / CFB Transfer ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

=== CFNR / Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred or forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|'''Caller can make a call to a Broadcast Group'''
|OK
|----
|'''Caller can make a call to a Waiting Queue'''
|OK
|----
|'''Announcement if nobody picks up the call'''
|OK
|}

== Configuration ==

Howto:Belgacall - Spike Technics - SIP Provider

2014-08-25T07:18:47Z

Joostlauwen: /* Transfer with consultation */

[[Image:3rdPartyGoldfischglas 03.png|right]]

'''Innovaphone Compatibility Test Report'''

== Summary ==

'''SIP Provider: Spike Technics'''


== Current test state ==


{{Template:Compat Status "in progress"}}









== Testing Enviroment ==

[[Image:SIPProviderTestTopology1.PNG]]

This scenario describes a setup where the PBX and phones are in a private network.

There are 3 major configuration variants of the SIP trunk, which one is used depends on the test results. The variants are:

* the SIP trunk is configured without Media Relay and without exclusive coder. This is the case if all tests were successful
* the SIP trunk is configured with Media Relay and STUN but without exclusive coder. This is the case when the test for "NAT Traversal" fails
* the SIP trunk is configured with Media Relay and exclusive coder. This is the case when the test for "Reverse Media Negotiation" fails

The test scenario should describe which SIP trunk configuration is needed.

== Test Results ==

For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|'''call using g711a'''
|OK
|----
|'''call using g711u'''
|OK
|----
|call using g723
|NA
|----
|call using g729
|OK
|----
|call using g722
|NA
|----
|Overlapped sending
|Nok
|----
|'''early media channel'''
|OK
|----
|Fax using T.38
|OK
|----
|T.38 Transcoding by the provider
|OK
|----
|Reverse Media Negotiation
|OK
|----
|CGPN can be suppressed
|OK
|----
|CLIP no screening
|OK
|----
|'''Long time call possible(>30 min)'''
|OK
|----
|'''External Transfer'''
|OK
|----
|NAT Detection
|OK
|----
|Redundancy
|NA
|----
|SIP over TCP
|OK
|----
|'''Voice Quality OK?'''
|OK
|}

=== Direct Dial In ===

{| border="1"
!Tested feature
!Result
|----
|'''Inbound(Provider -> Innovaphone)'''
|OK
|----
|'''Outbound(Innovaphone -> Provider)'''
|OK
|----
|'''Loop In call(Innovaphone -> Provider -> Innovaphone)'''
|OK
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|'''DTMF tones sent correctly via RTP-events(RFC 2833)'''
|OK
|----
|DTMF tones sent correctly via SIP-Info
|OK
|----
|'''DTMF tones received correctly via RTP-events(RFC 2833)'''
|OK
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be put on hold'''
|OK
|----
|Held end hears music on hold / announcement from PBX
|OK
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|OK
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold or dialling tone
|OK
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|Not Tested
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Result
|----
|Call can be transferred
|OK
|----
|Held end hears dialling tone
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|}

=== CFU / CFB Transfer ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

=== CFNR / Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred or forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|'''Caller can make a call to a Broadcast Group'''
|OK
|----
|'''Caller can make a call to a Waiting Queue'''
|OK
|----
|'''Announcement if nobody picks up the call'''
|OK
|}

== Configuration ==

Howto:Belgacall - Spike Technics - SIP Provider

2014-08-25T07:17:44Z

Joostlauwen: /* Transfer with consultation (alerting only) */

[[Image:3rdPartyGoldfischglas 03.png|right]]

'''Innovaphone Compatibility Test Report'''

== Summary ==

'''SIP Provider: Spike Technics'''


== Current test state ==


{{Template:Compat Status "in progress"}}









== Testing Enviroment ==

[[Image:SIPProviderTestTopology1.PNG]]

This scenario describes a setup where the PBX and phones are in a private network.

There are 3 major configuration variants of the SIP trunk, which one is used depends on the test results. The variants are:

* the SIP trunk is configured without Media Relay and without exclusive coder. This is the case if all tests were successful
* the SIP trunk is configured with Media Relay and STUN but without exclusive coder. This is the case when the test for "NAT Traversal" fails
* the SIP trunk is configured with Media Relay and exclusive coder. This is the case when the test for "Reverse Media Negotiation" fails

The test scenario should describe which SIP trunk configuration is needed.

== Test Results ==

For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|'''call using g711a'''
|OK
|----
|'''call using g711u'''
|OK
|----
|call using g723
|NA
|----
|call using g729
|OK
|----
|call using g722
|NA
|----
|Overlapped sending
|Nok
|----
|'''early media channel'''
|OK
|----
|Fax using T.38
|OK
|----
|T.38 Transcoding by the provider
|OK
|----
|Reverse Media Negotiation
|OK
|----
|CGPN can be suppressed
|OK
|----
|CLIP no screening
|OK
|----
|'''Long time call possible(>30 min)'''
|OK
|----
|'''External Transfer'''
|OK
|----
|NAT Detection
|OK
|----
|Redundancy
|NA
|----
|SIP over TCP
|OK
|----
|'''Voice Quality OK?'''
|OK
|}

=== Direct Dial In ===

{| border="1"
!Tested feature
!Result
|----
|'''Inbound(Provider -> Innovaphone)'''
|OK
|----
|'''Outbound(Innovaphone -> Provider)'''
|OK
|----
|'''Loop In call(Innovaphone -> Provider -> Innovaphone)'''
|OK
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|'''DTMF tones sent correctly via RTP-events(RFC 2833)'''
|OK
|----
|DTMF tones sent correctly via SIP-Info
|OK
|----
|'''DTMF tones received correctly via RTP-events(RFC 2833)'''
|OK
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be put on hold'''
|OK
|----
|Held end hears music on hold / announcement from PBX
|OK
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold or dialling tone
|OK
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|Not Tested
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Result
|----
|Call can be transferred
|OK
|----
|Held end hears dialling tone
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|}

=== CFU / CFB Transfer ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

=== CFNR / Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred or forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|'''Caller can make a call to a Broadcast Group'''
|OK
|----
|'''Caller can make a call to a Waiting Queue'''
|OK
|----
|'''Announcement if nobody picks up the call'''
|OK
|}

== Configuration ==

Howto:Belgacall - Spike Technics - SIP Provider

2014-08-25T07:16:58Z

Joostlauwen: /* SIP - Trunk */

[[Image:3rdPartyGoldfischglas 03.png|right]]

'''Innovaphone Compatibility Test Report'''

== Summary ==

'''SIP Provider: Spike Technics'''


== Current test state ==


{{Template:Compat Status "in progress"}}









== Testing Enviroment ==

[[Image:SIPProviderTestTopology1.PNG]]

This scenario describes a setup where the PBX and phones are in a private network.

There are 3 major configuration variants of the SIP trunk, which one is used depends on the test results. The variants are:

* the SIP trunk is configured without Media Relay and without exclusive coder. This is the case if all tests were successful
* the SIP trunk is configured with Media Relay and STUN but without exclusive coder. This is the case when the test for "NAT Traversal" fails
* the SIP trunk is configured with Media Relay and exclusive coder. This is the case when the test for "Reverse Media Negotiation" fails

The test scenario should describe which SIP trunk configuration is needed.

== Test Results ==

For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|'''call using g711a'''
|OK
|----
|'''call using g711u'''
|OK
|----
|call using g723
|NA
|----
|call using g729
|OK
|----
|call using g722
|NA
|----
|Overlapped sending
|Nok
|----
|'''early media channel'''
|OK
|----
|Fax using T.38
|OK
|----
|T.38 Transcoding by the provider
|OK
|----
|Reverse Media Negotiation
|OK
|----
|CGPN can be suppressed
|OK
|----
|CLIP no screening
|OK
|----
|'''Long time call possible(>30 min)'''
|OK
|----
|'''External Transfer'''
|OK
|----
|NAT Detection
|OK
|----
|Redundancy
|NA
|----
|SIP over TCP
|OK
|----
|'''Voice Quality OK?'''
|OK
|}

=== Direct Dial In ===

{| border="1"
!Tested feature
!Result
|----
|'''Inbound(Provider -> Innovaphone)'''
|OK
|----
|'''Outbound(Innovaphone -> Provider)'''
|OK
|----
|'''Loop In call(Innovaphone -> Provider -> Innovaphone)'''
|OK
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|'''DTMF tones sent correctly via RTP-events(RFC 2833)'''
|OK
|----
|DTMF tones sent correctly via SIP-Info
|OK
|----
|'''DTMF tones received correctly via RTP-events(RFC 2833)'''
|OK
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be put on hold'''
|OK
|----
|Held end hears music on hold / announcement from PBX
|OK
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|
|----
|Held end hears music on hold or dialling tone
|
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Result
|----
|Call can be transferred
|OK
|----
|Held end hears dialling tone
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|}

=== CFU / CFB Transfer ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

=== CFNR / Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred or forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|'''Caller can make a call to a Broadcast Group'''
|OK
|----
|'''Caller can make a call to a Waiting Queue'''
|OK
|----
|'''Announcement if nobody picks up the call'''
|OK
|}

== Configuration ==

Howto:Belgacall - Spike Technics - SIP Provider

2014-08-25T07:16:51Z

Joostlauwen: /* Number Mapping */

[[Image:3rdPartyGoldfischglas 03.png|right]]

'''Innovaphone Compatibility Test Report'''

== Summary ==

'''SIP Provider: Spike Technics'''


== Current test state ==


{{Template:Compat Status "in progress"}}









== Testing Enviroment ==

[[Image:SIPProviderTestTopology1.PNG]]

This scenario describes a setup where the PBX and phones are in a private network.

There are 3 major configuration variants of the SIP trunk, which one is used depends on the test results. The variants are:

* the SIP trunk is configured without Media Relay and without exclusive coder. This is the case if all tests were successful
* the SIP trunk is configured with Media Relay and STUN but without exclusive coder. This is the case when the test for "NAT Traversal" fails
* the SIP trunk is configured with Media Relay and exclusive coder. This is the case when the test for "Reverse Media Negotiation" fails

The test scenario should describe which SIP trunk configuration is needed.

== Test Results ==

For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|'''call using g711a'''
|OK
|----
|'''call using g711u'''
|OK
|----
|call using g723
|NA
|----
|call using g729
|OK
|----
|call using g722
|NA
|----
|Overlapped sending
|Nok
|----
|'''early media channel'''
|OK
|----
|Fax using T.38
|OK
|----
|T.38 Transcoding by the provider
|OK
|----
|Reverse Media Negotiation
|OK
|----
|CGPN can be suppressed
|OK
|----
|CLIP no screening
|OK
|----
|'''Long time call possible(>30 min)'''
|OK
|----
|'''External Transfer'''
|OK
|----
|NAT Detection
|OK
|----
|Redundancy
|NA
|----
|SIP over TCP
|OK
|----
|'''Voice Quality OK?'''
|OK
|}

=== Direct Dial In ===

{| border="1"
!Tested feature
!Result
|----
|'''Inbound(Provider -> Innovaphone)'''
|OK
|----
|'''Outbound(Innovaphone -> Provider)'''
|OK
|----
|'''Loop In call(Innovaphone -> Provider -> Innovaphone)'''
|OK
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|'''DTMF tones sent correctly via RTP-events(RFC 2833)'''
|OK
|----
|DTMF tones sent correctly via SIP-Info
|OK
|----
|'''DTMF tones received correctly via RTP-events(RFC 2833)'''
|OK
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be put on hold'''
|OK
|----
|Held end hears music on hold / announcement from PBX
|OK
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|
|----
|Held end hears music on hold or dialling tone
|
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Result
|----
|Call can be transferred
|OK
|----
|Held end hears dialling tone
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|}

=== CFU / CFB Transfer ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

=== CFNR / Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred or forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|'''Caller can make a call to a Broadcast Group'''
|OK
|----
|'''Caller can make a call to a Waiting Queue'''
|OK
|----
|'''Announcement if nobody picks up the call'''
|OK
|}

== Configuration ==

=== SIP - Trunk ===

Howto:Belgacall - Spike Technics - SIP Provider

2014-08-25T07:16:43Z

Joostlauwen: /* Route Settings */

[[Image:3rdPartyGoldfischglas 03.png|right]]

'''Innovaphone Compatibility Test Report'''

== Summary ==

'''SIP Provider: Spike Technics'''


== Current test state ==


{{Template:Compat Status "in progress"}}









== Testing Enviroment ==

[[Image:SIPProviderTestTopology1.PNG]]

This scenario describes a setup where the PBX and phones are in a private network.

There are 3 major configuration variants of the SIP trunk, which one is used depends on the test results. The variants are:

* the SIP trunk is configured without Media Relay and without exclusive coder. This is the case if all tests were successful
* the SIP trunk is configured with Media Relay and STUN but without exclusive coder. This is the case when the test for "NAT Traversal" fails
* the SIP trunk is configured with Media Relay and exclusive coder. This is the case when the test for "Reverse Media Negotiation" fails

The test scenario should describe which SIP trunk configuration is needed.

== Test Results ==

For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|'''call using g711a'''
|OK
|----
|'''call using g711u'''
|OK
|----
|call using g723
|NA
|----
|call using g729
|OK
|----
|call using g722
|NA
|----
|Overlapped sending
|Nok
|----
|'''early media channel'''
|OK
|----
|Fax using T.38
|OK
|----
|T.38 Transcoding by the provider
|OK
|----
|Reverse Media Negotiation
|OK
|----
|CGPN can be suppressed
|OK
|----
|CLIP no screening
|OK
|----
|'''Long time call possible(>30 min)'''
|OK
|----
|'''External Transfer'''
|OK
|----
|NAT Detection
|OK
|----
|Redundancy
|NA
|----
|SIP over TCP
|OK
|----
|'''Voice Quality OK?'''
|OK
|}

=== Direct Dial In ===

{| border="1"
!Tested feature
!Result
|----
|'''Inbound(Provider -> Innovaphone)'''
|OK
|----
|'''Outbound(Innovaphone -> Provider)'''
|OK
|----
|'''Loop In call(Innovaphone -> Provider -> Innovaphone)'''
|OK
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|'''DTMF tones sent correctly via RTP-events(RFC 2833)'''
|OK
|----
|DTMF tones sent correctly via SIP-Info
|OK
|----
|'''DTMF tones received correctly via RTP-events(RFC 2833)'''
|OK
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be put on hold'''
|OK
|----
|Held end hears music on hold / announcement from PBX
|OK
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|
|----
|Held end hears music on hold or dialling tone
|
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Result
|----
|Call can be transferred
|OK
|----
|Held end hears dialling tone
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|}

=== CFU / CFB Transfer ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

=== CFNR / Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred or forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|'''Caller can make a call to a Broadcast Group'''
|OK
|----
|'''Caller can make a call to a Waiting Queue'''
|OK
|----
|'''Announcement if nobody picks up the call'''
|OK
|}

== Configuration ==

=== SIP - Trunk ===

=== Number Mapping ===

Howto:Belgacall - Spike Technics - SIP Provider

2014-08-25T07:16:36Z

Joostlauwen: /* Media Relay */

[[Image:3rdPartyGoldfischglas 03.png|right]]

'''Innovaphone Compatibility Test Report'''

== Summary ==

'''SIP Provider: Spike Technics'''


== Current test state ==


{{Template:Compat Status "in progress"}}









== Testing Enviroment ==

[[Image:SIPProviderTestTopology1.PNG]]

This scenario describes a setup where the PBX and phones are in a private network.

There are 3 major configuration variants of the SIP trunk, which one is used depends on the test results. The variants are:

* the SIP trunk is configured without Media Relay and without exclusive coder. This is the case if all tests were successful
* the SIP trunk is configured with Media Relay and STUN but without exclusive coder. This is the case when the test for "NAT Traversal" fails
* the SIP trunk is configured with Media Relay and exclusive coder. This is the case when the test for "Reverse Media Negotiation" fails

The test scenario should describe which SIP trunk configuration is needed.

== Test Results ==

For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|'''call using g711a'''
|OK
|----
|'''call using g711u'''
|OK
|----
|call using g723
|NA
|----
|call using g729
|OK
|----
|call using g722
|NA
|----
|Overlapped sending
|Nok
|----
|'''early media channel'''
|OK
|----
|Fax using T.38
|OK
|----
|T.38 Transcoding by the provider
|OK
|----
|Reverse Media Negotiation
|OK
|----
|CGPN can be suppressed
|OK
|----
|CLIP no screening
|OK
|----
|'''Long time call possible(>30 min)'''
|OK
|----
|'''External Transfer'''
|OK
|----
|NAT Detection
|OK
|----
|Redundancy
|NA
|----
|SIP over TCP
|OK
|----
|'''Voice Quality OK?'''
|OK
|}

=== Direct Dial In ===

{| border="1"
!Tested feature
!Result
|----
|'''Inbound(Provider -> Innovaphone)'''
|OK
|----
|'''Outbound(Innovaphone -> Provider)'''
|OK
|----
|'''Loop In call(Innovaphone -> Provider -> Innovaphone)'''
|OK
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|'''DTMF tones sent correctly via RTP-events(RFC 2833)'''
|OK
|----
|DTMF tones sent correctly via SIP-Info
|OK
|----
|'''DTMF tones received correctly via RTP-events(RFC 2833)'''
|OK
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be put on hold'''
|OK
|----
|Held end hears music on hold / announcement from PBX
|OK
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|
|----
|Held end hears music on hold or dialling tone
|
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Result
|----
|Call can be transferred
|OK
|----
|Held end hears dialling tone
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|}

=== CFU / CFB Transfer ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

=== CFNR / Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred or forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|'''Caller can make a call to a Broadcast Group'''
|OK
|----
|'''Caller can make a call to a Waiting Queue'''
|OK
|----
|'''Announcement if nobody picks up the call'''
|OK
|}

== Configuration ==

=== SIP - Trunk ===

=== Number Mapping ===

=== Route Settings ===

Howto:Belgacall - Spike Technics - SIP Provider

2014-08-25T07:16:29Z

Joostlauwen: /* Fax */

[[Image:3rdPartyGoldfischglas 03.png|right]]

'''Innovaphone Compatibility Test Report'''

== Summary ==

'''SIP Provider: Spike Technics'''


== Current test state ==


{{Template:Compat Status "in progress"}}









== Testing Enviroment ==

[[Image:SIPProviderTestTopology1.PNG]]

This scenario describes a setup where the PBX and phones are in a private network.

There are 3 major configuration variants of the SIP trunk, which one is used depends on the test results. The variants are:

* the SIP trunk is configured without Media Relay and without exclusive coder. This is the case if all tests were successful
* the SIP trunk is configured with Media Relay and STUN but without exclusive coder. This is the case when the test for "NAT Traversal" fails
* the SIP trunk is configured with Media Relay and exclusive coder. This is the case when the test for "Reverse Media Negotiation" fails

The test scenario should describe which SIP trunk configuration is needed.

== Test Results ==

For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|'''call using g711a'''
|OK
|----
|'''call using g711u'''
|OK
|----
|call using g723
|NA
|----
|call using g729
|OK
|----
|call using g722
|NA
|----
|Overlapped sending
|Nok
|----
|'''early media channel'''
|OK
|----
|Fax using T.38
|OK
|----
|T.38 Transcoding by the provider
|OK
|----
|Reverse Media Negotiation
|OK
|----
|CGPN can be suppressed
|OK
|----
|CLIP no screening
|OK
|----
|'''Long time call possible(>30 min)'''
|OK
|----
|'''External Transfer'''
|OK
|----
|NAT Detection
|OK
|----
|Redundancy
|NA
|----
|SIP over TCP
|OK
|----
|'''Voice Quality OK?'''
|OK
|}

=== Direct Dial In ===

{| border="1"
!Tested feature
!Result
|----
|'''Inbound(Provider -> Innovaphone)'''
|OK
|----
|'''Outbound(Innovaphone -> Provider)'''
|OK
|----
|'''Loop In call(Innovaphone -> Provider -> Innovaphone)'''
|OK
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|'''DTMF tones sent correctly via RTP-events(RFC 2833)'''
|OK
|----
|DTMF tones sent correctly via SIP-Info
|OK
|----
|'''DTMF tones received correctly via RTP-events(RFC 2833)'''
|OK
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be put on hold'''
|OK
|----
|Held end hears music on hold / announcement from PBX
|OK
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|
|----
|Held end hears music on hold or dialling tone
|
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Result
|----
|Call can be transferred
|OK
|----
|Held end hears dialling tone
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|}

=== CFU / CFB Transfer ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

=== CFNR / Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred or forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|'''Caller can make a call to a Broadcast Group'''
|OK
|----
|'''Caller can make a call to a Waiting Queue'''
|OK
|----
|'''Announcement if nobody picks up the call'''
|OK
|}

== Configuration ==

=== SIP - Trunk ===

=== Number Mapping ===

=== Route Settings ===

=== Media Relay ===

Howto:Belgacall - Spike Technics - SIP Provider

2014-08-25T07:16:20Z

Joostlauwen: /* Firmware version */

[[Image:3rdPartyGoldfischglas 03.png|right]]

'''Innovaphone Compatibility Test Report'''

== Summary ==

'''SIP Provider: Spike Technics'''


== Current test state ==


{{Template:Compat Status "in progress"}}









== Testing Enviroment ==

[[Image:SIPProviderTestTopology1.PNG]]

This scenario describes a setup where the PBX and phones are in a private network.

There are 3 major configuration variants of the SIP trunk, which one is used depends on the test results. The variants are:

* the SIP trunk is configured without Media Relay and without exclusive coder. This is the case if all tests were successful
* the SIP trunk is configured with Media Relay and STUN but without exclusive coder. This is the case when the test for "NAT Traversal" fails
* the SIP trunk is configured with Media Relay and exclusive coder. This is the case when the test for "Reverse Media Negotiation" fails

The test scenario should describe which SIP trunk configuration is needed.

== Test Results ==

For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|'''call using g711a'''
|OK
|----
|'''call using g711u'''
|OK
|----
|call using g723
|NA
|----
|call using g729
|OK
|----
|call using g722
|NA
|----
|Overlapped sending
|Nok
|----
|'''early media channel'''
|OK
|----
|Fax using T.38
|OK
|----
|T.38 Transcoding by the provider
|OK
|----
|Reverse Media Negotiation
|OK
|----
|CGPN can be suppressed
|OK
|----
|CLIP no screening
|OK
|----
|'''Long time call possible(>30 min)'''
|OK
|----
|'''External Transfer'''
|OK
|----
|NAT Detection
|OK
|----
|Redundancy
|NA
|----
|SIP over TCP
|OK
|----
|'''Voice Quality OK?'''
|OK
|}

=== Direct Dial In ===

{| border="1"
!Tested feature
!Result
|----
|'''Inbound(Provider -> Innovaphone)'''
|OK
|----
|'''Outbound(Innovaphone -> Provider)'''
|OK
|----
|'''Loop In call(Innovaphone -> Provider -> Innovaphone)'''
|OK
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|'''DTMF tones sent correctly via RTP-events(RFC 2833)'''
|OK
|----
|DTMF tones sent correctly via SIP-Info
|OK
|----
|'''DTMF tones received correctly via RTP-events(RFC 2833)'''
|OK
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be put on hold'''
|OK
|----
|Held end hears music on hold / announcement from PBX
|OK
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|
|----
|Held end hears music on hold or dialling tone
|
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Result
|----
|Call can be transferred
|OK
|----
|Held end hears dialling tone
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|}

=== CFU / CFB Transfer ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

=== CFNR / Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred or forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|'''Caller can make a call to a Broadcast Group'''
|OK
|----
|'''Caller can make a call to a Waiting Queue'''
|OK
|----
|'''Announcement if nobody picks up the call'''
|OK
|}

== Configuration ==

=== SIP - Trunk ===

=== Number Mapping ===

=== Route Settings ===

=== Media Relay ===

=== Fax ===

[[Category:Compat|{{PAGENAME}}]]

Howto:Belgacall - Spike Technics - SIP Provider

2014-08-25T07:16:11Z

Joostlauwen: /* CFNR / Blind Transfer (alerting only) */

[[Image:3rdPartyGoldfischglas 03.png|right]]

'''Innovaphone Compatibility Test Report'''

== Summary ==

'''SIP Provider: Spike Technics'''


== Current test state ==


{{Template:Compat Status "in progress"}}









== Testing Enviroment ==

[[Image:SIPProviderTestTopology1.PNG]]

This scenario describes a setup where the PBX and phones are in a private network.

There are 3 major configuration variants of the SIP trunk, which one is used depends on the test results. The variants are:

* the SIP trunk is configured without Media Relay and without exclusive coder. This is the case if all tests were successful
* the SIP trunk is configured with Media Relay and STUN but without exclusive coder. This is the case when the test for "NAT Traversal" fails
* the SIP trunk is configured with Media Relay and exclusive coder. This is the case when the test for "Reverse Media Negotiation" fails

The test scenario should describe which SIP trunk configuration is needed.

== Test Results ==

For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|'''call using g711a'''
|OK
|----
|'''call using g711u'''
|OK
|----
|call using g723
|NA
|----
|call using g729
|OK
|----
|call using g722
|NA
|----
|Overlapped sending
|Nok
|----
|'''early media channel'''
|OK
|----
|Fax using T.38
|OK
|----
|T.38 Transcoding by the provider
|OK
|----
|Reverse Media Negotiation
|OK
|----
|CGPN can be suppressed
|OK
|----
|CLIP no screening
|OK
|----
|'''Long time call possible(>30 min)'''
|OK
|----
|'''External Transfer'''
|OK
|----
|NAT Detection
|OK
|----
|Redundancy
|NA
|----
|SIP over TCP
|OK
|----
|'''Voice Quality OK?'''
|OK
|}

=== Direct Dial In ===

{| border="1"
!Tested feature
!Result
|----
|'''Inbound(Provider -> Innovaphone)'''
|OK
|----
|'''Outbound(Innovaphone -> Provider)'''
|OK
|----
|'''Loop In call(Innovaphone -> Provider -> Innovaphone)'''
|OK
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|'''DTMF tones sent correctly via RTP-events(RFC 2833)'''
|OK
|----
|DTMF tones sent correctly via SIP-Info
|OK
|----
|'''DTMF tones received correctly via RTP-events(RFC 2833)'''
|OK
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be put on hold'''
|OK
|----
|Held end hears music on hold / announcement from PBX
|OK
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|
|----
|Held end hears music on hold or dialling tone
|
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Result
|----
|Call can be transferred
|OK
|----
|Held end hears dialling tone
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|}

=== CFU / CFB Transfer ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

=== CFNR / Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred or forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|'''Caller can make a call to a Broadcast Group'''
|OK
|----
|'''Caller can make a call to a Waiting Queue'''
|OK
|----
|'''Announcement if nobody picks up the call'''
|OK
|}

== Configuration ==

===Firmware version===

All innovaphone devices use Vx build xx-xxxxx as firmware.

=== SIP - Trunk ===

=== Number Mapping ===

=== Route Settings ===

=== Media Relay ===

=== Fax ===

[[Category:Compat|{{PAGENAME}}]]

Howto:Belgacall - Spike Technics - SIP Provider

2014-08-25T07:15:48Z

Joostlauwen: /* Blind Transfer */

[[Image:3rdPartyGoldfischglas 03.png|right]]

'''Innovaphone Compatibility Test Report'''

== Summary ==

'''SIP Provider: Spike Technics'''


== Current test state ==


{{Template:Compat Status "in progress"}}









== Testing Enviroment ==

[[Image:SIPProviderTestTopology1.PNG]]

This scenario describes a setup where the PBX and phones are in a private network.

There are 3 major configuration variants of the SIP trunk, which one is used depends on the test results. The variants are:

* the SIP trunk is configured without Media Relay and without exclusive coder. This is the case if all tests were successful
* the SIP trunk is configured with Media Relay and STUN but without exclusive coder. This is the case when the test for "NAT Traversal" fails
* the SIP trunk is configured with Media Relay and exclusive coder. This is the case when the test for "Reverse Media Negotiation" fails

The test scenario should describe which SIP trunk configuration is needed.

== Test Results ==

For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|'''call using g711a'''
|OK
|----
|'''call using g711u'''
|OK
|----
|call using g723
|NA
|----
|call using g729
|OK
|----
|call using g722
|NA
|----
|Overlapped sending
|Nok
|----
|'''early media channel'''
|OK
|----
|Fax using T.38
|OK
|----
|T.38 Transcoding by the provider
|OK
|----
|Reverse Media Negotiation
|OK
|----
|CGPN can be suppressed
|OK
|----
|CLIP no screening
|OK
|----
|'''Long time call possible(>30 min)'''
|OK
|----
|'''External Transfer'''
|OK
|----
|NAT Detection
|OK
|----
|Redundancy
|NA
|----
|SIP over TCP
|OK
|----
|'''Voice Quality OK?'''
|OK
|}

=== Direct Dial In ===

{| border="1"
!Tested feature
!Result
|----
|'''Inbound(Provider -> Innovaphone)'''
|OK
|----
|'''Outbound(Innovaphone -> Provider)'''
|OK
|----
|'''Loop In call(Innovaphone -> Provider -> Innovaphone)'''
|OK
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|'''DTMF tones sent correctly via RTP-events(RFC 2833)'''
|OK
|----
|DTMF tones sent correctly via SIP-Info
|OK
|----
|'''DTMF tones received correctly via RTP-events(RFC 2833)'''
|OK
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be put on hold'''
|OK
|----
|Held end hears music on hold / announcement from PBX
|OK
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|
|----
|Held end hears music on hold or dialling tone
|
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Result
|----
|Call can be transferred
|OK
|----
|Held end hears dialling tone
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|OK
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|OK
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|OK
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|OK
|}

=== CFU / CFB Transfer ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

=== CFNR / Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred or forward'''
|
|----
|'''Held end hears dialling tone'''
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|'''Caller can make a call to a Broadcast Group'''
|OK
|----
|'''Caller can make a call to a Waiting Queue'''
|OK
|----
|'''Announcement if nobody picks up the call'''
|OK
|}

== Configuration ==

===Firmware version===

All innovaphone devices use Vx build xx-xxxxx as firmware.

=== SIP - Trunk ===

=== Number Mapping ===

=== Route Settings ===

=== Media Relay ===

=== Fax ===

[[Category:Compat|{{PAGENAME}}]]

Howto:Belgacall - Spike Technics - SIP Provider

2014-08-21T14:39:43Z

Joostlauwen: /* Broadcast Group & Waiting Queue */

[[Image:3rdPartyGoldfischglas 03.png|right]]

'''Innovaphone Compatibility Test Report'''

== Summary ==

'''SIP Provider: Spike Technics'''


== Current test state ==


{{Template:Compat Status "in progress"}}









== Testing Enviroment ==

[[Image:SIPProviderTestTopology1.PNG]]

This scenario describes a setup where the PBX and phones are in a private network.

There are 3 major configuration variants of the SIP trunk, which one is used depends on the test results. The variants are:

* the SIP trunk is configured without Media Relay and without exclusive coder. This is the case if all tests were successful
* the SIP trunk is configured with Media Relay and STUN but without exclusive coder. This is the case when the test for "NAT Traversal" fails
* the SIP trunk is configured with Media Relay and exclusive coder. This is the case when the test for "Reverse Media Negotiation" fails

The test scenario should describe which SIP trunk configuration is needed.

== Test Results ==

For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|'''call using g711a'''
|OK
|----
|'''call using g711u'''
|OK
|----
|call using g723
|NA
|----
|call using g729
|OK
|----
|call using g722
|NA
|----
|Overlapped sending
|Nok
|----
|'''early media channel'''
|OK
|----
|Fax using T.38
|OK
|----
|T.38 Transcoding by the provider
|OK
|----
|Reverse Media Negotiation
|OK
|----
|CGPN can be suppressed
|OK
|----
|CLIP no screening
|OK
|----
|'''Long time call possible(>30 min)'''
|OK
|----
|'''External Transfer'''
|OK
|----
|NAT Detection
|OK
|----
|Redundancy
|NA
|----
|SIP over TCP
|OK
|----
|'''Voice Quality OK?'''
|OK
|}

=== Direct Dial In ===

{| border="1"
!Tested feature
!Result
|----
|'''Inbound(Provider -> Innovaphone)'''
|OK
|----
|'''Outbound(Innovaphone -> Provider)'''
|OK
|----
|'''Loop In call(Innovaphone -> Provider -> Innovaphone)'''
|OK
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|'''DTMF tones sent correctly via RTP-events(RFC 2833)'''
|OK
|----
|DTMF tones sent correctly via SIP-Info
|OK
|----
|'''DTMF tones received correctly via RTP-events(RFC 2833)'''
|OK
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be put on hold'''
|OK
|----
|Held end hears music on hold / announcement from PBX
|OK
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|
|----
|Held end hears music on hold or dialling tone
|
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Result
|----
|Call can be transferred
|OK
|----
|Held end hears dialling tone
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|}

=== CFU / CFB Transfer ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

=== CFNR / Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred or forward'''
|
|----
|'''Held end hears dialling tone'''
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|'''Caller can make a call to a Broadcast Group'''
|OK
|----
|'''Caller can make a call to a Waiting Queue'''
|OK
|----
|'''Announcement if nobody picks up the call'''
|OK
|}

== Configuration ==

===Firmware version===

All innovaphone devices use Vx build xx-xxxxx as firmware.

=== SIP - Trunk ===

=== Number Mapping ===

=== Route Settings ===

=== Media Relay ===

=== Fax ===

[[Category:Compat|{{PAGENAME}}]]

Howto:Belgacall - Spike Technics - SIP Provider

2014-08-21T14:39:26Z

Joostlauwen: /* CFU / CFB Transfer */

[[Image:3rdPartyGoldfischglas 03.png|right]]

'''Innovaphone Compatibility Test Report'''

== Summary ==

'''SIP Provider: Spike Technics'''


== Current test state ==


{{Template:Compat Status "in progress"}}









== Testing Enviroment ==

[[Image:SIPProviderTestTopology1.PNG]]

This scenario describes a setup where the PBX and phones are in a private network.

There are 3 major configuration variants of the SIP trunk, which one is used depends on the test results. The variants are:

* the SIP trunk is configured without Media Relay and without exclusive coder. This is the case if all tests were successful
* the SIP trunk is configured with Media Relay and STUN but without exclusive coder. This is the case when the test for "NAT Traversal" fails
* the SIP trunk is configured with Media Relay and exclusive coder. This is the case when the test for "Reverse Media Negotiation" fails

The test scenario should describe which SIP trunk configuration is needed.

== Test Results ==

For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|'''call using g711a'''
|OK
|----
|'''call using g711u'''
|OK
|----
|call using g723
|NA
|----
|call using g729
|OK
|----
|call using g722
|NA
|----
|Overlapped sending
|Nok
|----
|'''early media channel'''
|OK
|----
|Fax using T.38
|OK
|----
|T.38 Transcoding by the provider
|OK
|----
|Reverse Media Negotiation
|OK
|----
|CGPN can be suppressed
|OK
|----
|CLIP no screening
|OK
|----
|'''Long time call possible(>30 min)'''
|OK
|----
|'''External Transfer'''
|OK
|----
|NAT Detection
|OK
|----
|Redundancy
|NA
|----
|SIP over TCP
|OK
|----
|'''Voice Quality OK?'''
|OK
|}

=== Direct Dial In ===

{| border="1"
!Tested feature
!Result
|----
|'''Inbound(Provider -> Innovaphone)'''
|OK
|----
|'''Outbound(Innovaphone -> Provider)'''
|OK
|----
|'''Loop In call(Innovaphone -> Provider -> Innovaphone)'''
|OK
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|'''DTMF tones sent correctly via RTP-events(RFC 2833)'''
|OK
|----
|DTMF tones sent correctly via SIP-Info
|OK
|----
|'''DTMF tones received correctly via RTP-events(RFC 2833)'''
|OK
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be put on hold'''
|OK
|----
|Held end hears music on hold / announcement from PBX
|OK
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|
|----
|Held end hears music on hold or dialling tone
|
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Result
|----
|Call can be transferred
|OK
|----
|Held end hears dialling tone
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|}

=== CFU / CFB Transfer ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be forward'''
|OK
|----
|'''Held end hears dialling tone'''
|OK
|}

=== CFNR / Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred or forward'''
|
|----
|'''Held end hears dialling tone'''
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|'''Caller can make a call to a Broadcast Group'''
|
|----
|'''Caller can make a call to a Waiting Queue'''
|
|----
|'''Announcement if nobody picks up the call'''
|
|}

== Configuration ==

===Firmware version===

All innovaphone devices use Vx build xx-xxxxx as firmware.

=== SIP - Trunk ===

=== Number Mapping ===

=== Route Settings ===

=== Media Relay ===

=== Fax ===

[[Category:Compat|{{PAGENAME}}]]

Howto:Belgacall - Spike Technics - SIP Provider

2014-08-21T14:39:14Z

Joostlauwen: /* Blind Transfer */

[[Image:3rdPartyGoldfischglas 03.png|right]]

'''Innovaphone Compatibility Test Report'''

== Summary ==

'''SIP Provider: Spike Technics'''


== Current test state ==


{{Template:Compat Status "in progress"}}









== Testing Enviroment ==

[[Image:SIPProviderTestTopology1.PNG]]

This scenario describes a setup where the PBX and phones are in a private network.

There are 3 major configuration variants of the SIP trunk, which one is used depends on the test results. The variants are:

* the SIP trunk is configured without Media Relay and without exclusive coder. This is the case if all tests were successful
* the SIP trunk is configured with Media Relay and STUN but without exclusive coder. This is the case when the test for "NAT Traversal" fails
* the SIP trunk is configured with Media Relay and exclusive coder. This is the case when the test for "Reverse Media Negotiation" fails

The test scenario should describe which SIP trunk configuration is needed.

== Test Results ==

For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|'''call using g711a'''
|OK
|----
|'''call using g711u'''
|OK
|----
|call using g723
|NA
|----
|call using g729
|OK
|----
|call using g722
|NA
|----
|Overlapped sending
|Nok
|----
|'''early media channel'''
|OK
|----
|Fax using T.38
|OK
|----
|T.38 Transcoding by the provider
|OK
|----
|Reverse Media Negotiation
|OK
|----
|CGPN can be suppressed
|OK
|----
|CLIP no screening
|OK
|----
|'''Long time call possible(>30 min)'''
|OK
|----
|'''External Transfer'''
|OK
|----
|NAT Detection
|OK
|----
|Redundancy
|NA
|----
|SIP over TCP
|OK
|----
|'''Voice Quality OK?'''
|OK
|}

=== Direct Dial In ===

{| border="1"
!Tested feature
!Result
|----
|'''Inbound(Provider -> Innovaphone)'''
|OK
|----
|'''Outbound(Innovaphone -> Provider)'''
|OK
|----
|'''Loop In call(Innovaphone -> Provider -> Innovaphone)'''
|OK
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|'''DTMF tones sent correctly via RTP-events(RFC 2833)'''
|OK
|----
|DTMF tones sent correctly via SIP-Info
|OK
|----
|'''DTMF tones received correctly via RTP-events(RFC 2833)'''
|OK
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be put on hold'''
|OK
|----
|Held end hears music on hold / announcement from PBX
|OK
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|
|----
|Held end hears music on hold or dialling tone
|
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Result
|----
|Call can be transferred
|OK
|----
|Held end hears dialling tone
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|}

=== CFU / CFB Transfer ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be forward'''
|
|----
|'''Held end hears dialling tone'''
|
|}

=== CFNR / Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred or forward'''
|
|----
|'''Held end hears dialling tone'''
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|'''Caller can make a call to a Broadcast Group'''
|
|----
|'''Caller can make a call to a Waiting Queue'''
|
|----
|'''Announcement if nobody picks up the call'''
|
|}

== Configuration ==

===Firmware version===

All innovaphone devices use Vx build xx-xxxxx as firmware.

=== SIP - Trunk ===

=== Number Mapping ===

=== Route Settings ===

=== Media Relay ===

=== Fax ===

[[Category:Compat|{{PAGENAME}}]]

Howto:Belgacall - Spike Technics - SIP Provider

2014-08-21T14:38:47Z

Joostlauwen: /* Transfer with consultation */

[[Image:3rdPartyGoldfischglas 03.png|right]]

'''Innovaphone Compatibility Test Report'''

== Summary ==

'''SIP Provider: Spike Technics'''


== Current test state ==


{{Template:Compat Status "in progress"}}









== Testing Enviroment ==

[[Image:SIPProviderTestTopology1.PNG]]

This scenario describes a setup where the PBX and phones are in a private network.

There are 3 major configuration variants of the SIP trunk, which one is used depends on the test results. The variants are:

* the SIP trunk is configured without Media Relay and without exclusive coder. This is the case if all tests were successful
* the SIP trunk is configured with Media Relay and STUN but without exclusive coder. This is the case when the test for "NAT Traversal" fails
* the SIP trunk is configured with Media Relay and exclusive coder. This is the case when the test for "Reverse Media Negotiation" fails

The test scenario should describe which SIP trunk configuration is needed.

== Test Results ==

For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|'''call using g711a'''
|OK
|----
|'''call using g711u'''
|OK
|----
|call using g723
|NA
|----
|call using g729
|OK
|----
|call using g722
|NA
|----
|Overlapped sending
|Nok
|----
|'''early media channel'''
|OK
|----
|Fax using T.38
|OK
|----
|T.38 Transcoding by the provider
|OK
|----
|Reverse Media Negotiation
|OK
|----
|CGPN can be suppressed
|OK
|----
|CLIP no screening
|OK
|----
|'''Long time call possible(>30 min)'''
|OK
|----
|'''External Transfer'''
|OK
|----
|NAT Detection
|OK
|----
|Redundancy
|NA
|----
|SIP over TCP
|OK
|----
|'''Voice Quality OK?'''
|OK
|}

=== Direct Dial In ===

{| border="1"
!Tested feature
!Result
|----
|'''Inbound(Provider -> Innovaphone)'''
|OK
|----
|'''Outbound(Innovaphone -> Provider)'''
|OK
|----
|'''Loop In call(Innovaphone -> Provider -> Innovaphone)'''
|OK
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|'''DTMF tones sent correctly via RTP-events(RFC 2833)'''
|OK
|----
|DTMF tones sent correctly via SIP-Info
|OK
|----
|'''DTMF tones received correctly via RTP-events(RFC 2833)'''
|OK
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be put on hold'''
|OK
|----
|Held end hears music on hold / announcement from PBX
|OK
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|OK
|----
|Held end hears music on hold
|OK
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|
|----
|Held end hears music on hold or dialling tone
|
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Result
|----
|Call can be transferred
|
|----
|Held end hears dialling tone
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|}

=== CFU / CFB Transfer ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be forward'''
|
|----
|'''Held end hears dialling tone'''
|
|}

=== CFNR / Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred or forward'''
|
|----
|'''Held end hears dialling tone'''
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|'''Caller can make a call to a Broadcast Group'''
|
|----
|'''Caller can make a call to a Waiting Queue'''
|
|----
|'''Announcement if nobody picks up the call'''
|
|}

== Configuration ==

===Firmware version===

All innovaphone devices use Vx build xx-xxxxx as firmware.

=== SIP - Trunk ===

=== Number Mapping ===

=== Route Settings ===

=== Media Relay ===

=== Fax ===

[[Category:Compat|{{PAGENAME}}]]

Howto:Belgacall - Spike Technics - SIP Provider

2014-08-21T14:38:32Z

Joostlauwen: /* Hold/Retrieve */

[[Image:3rdPartyGoldfischglas 03.png|right]]

'''Innovaphone Compatibility Test Report'''

== Summary ==

'''SIP Provider: Spike Technics'''


== Current test state ==


{{Template:Compat Status "in progress"}}









== Testing Enviroment ==

[[Image:SIPProviderTestTopology1.PNG]]

This scenario describes a setup where the PBX and phones are in a private network.

There are 3 major configuration variants of the SIP trunk, which one is used depends on the test results. The variants are:

* the SIP trunk is configured without Media Relay and without exclusive coder. This is the case if all tests were successful
* the SIP trunk is configured with Media Relay and STUN but without exclusive coder. This is the case when the test for "NAT Traversal" fails
* the SIP trunk is configured with Media Relay and exclusive coder. This is the case when the test for "Reverse Media Negotiation" fails

The test scenario should describe which SIP trunk configuration is needed.

== Test Results ==

For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|'''call using g711a'''
|OK
|----
|'''call using g711u'''
|OK
|----
|call using g723
|NA
|----
|call using g729
|OK
|----
|call using g722
|NA
|----
|Overlapped sending
|Nok
|----
|'''early media channel'''
|OK
|----
|Fax using T.38
|OK
|----
|T.38 Transcoding by the provider
|OK
|----
|Reverse Media Negotiation
|OK
|----
|CGPN can be suppressed
|OK
|----
|CLIP no screening
|OK
|----
|'''Long time call possible(>30 min)'''
|OK
|----
|'''External Transfer'''
|OK
|----
|NAT Detection
|OK
|----
|Redundancy
|NA
|----
|SIP over TCP
|OK
|----
|'''Voice Quality OK?'''
|OK
|}

=== Direct Dial In ===

{| border="1"
!Tested feature
!Result
|----
|'''Inbound(Provider -> Innovaphone)'''
|OK
|----
|'''Outbound(Innovaphone -> Provider)'''
|OK
|----
|'''Loop In call(Innovaphone -> Provider -> Innovaphone)'''
|OK
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|'''DTMF tones sent correctly via RTP-events(RFC 2833)'''
|OK
|----
|DTMF tones sent correctly via SIP-Info
|OK
|----
|'''DTMF tones received correctly via RTP-events(RFC 2833)'''
|OK
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be put on hold'''
|OK
|----
|Held end hears music on hold / announcement from PBX
|OK
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|
|----
|Held end hears music on hold
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|
|----
|Held end hears music on hold or dialling tone
|
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Result
|----
|Call can be transferred
|
|----
|Held end hears dialling tone
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|}

=== CFU / CFB Transfer ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be forward'''
|
|----
|'''Held end hears dialling tone'''
|
|}

=== CFNR / Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred or forward'''
|
|----
|'''Held end hears dialling tone'''
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|'''Caller can make a call to a Broadcast Group'''
|
|----
|'''Caller can make a call to a Waiting Queue'''
|
|----
|'''Announcement if nobody picks up the call'''
|
|}

== Configuration ==

===Firmware version===

All innovaphone devices use Vx build xx-xxxxx as firmware.

=== SIP - Trunk ===

=== Number Mapping ===

=== Route Settings ===

=== Media Relay ===

=== Fax ===

[[Category:Compat|{{PAGENAME}}]]

Howto:Belgacall - Spike Technics - SIP Provider

2014-08-21T14:38:21Z

Joostlauwen: /* DTMF */

[[Image:3rdPartyGoldfischglas 03.png|right]]

'''Innovaphone Compatibility Test Report'''

== Summary ==

'''SIP Provider: Spike Technics'''


== Current test state ==


{{Template:Compat Status "in progress"}}









== Testing Enviroment ==

[[Image:SIPProviderTestTopology1.PNG]]

This scenario describes a setup where the PBX and phones are in a private network.

There are 3 major configuration variants of the SIP trunk, which one is used depends on the test results. The variants are:

* the SIP trunk is configured without Media Relay and without exclusive coder. This is the case if all tests were successful
* the SIP trunk is configured with Media Relay and STUN but without exclusive coder. This is the case when the test for "NAT Traversal" fails
* the SIP trunk is configured with Media Relay and exclusive coder. This is the case when the test for "Reverse Media Negotiation" fails

The test scenario should describe which SIP trunk configuration is needed.

== Test Results ==

For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|'''call using g711a'''
|OK
|----
|'''call using g711u'''
|OK
|----
|call using g723
|NA
|----
|call using g729
|OK
|----
|call using g722
|NA
|----
|Overlapped sending
|Nok
|----
|'''early media channel'''
|OK
|----
|Fax using T.38
|OK
|----
|T.38 Transcoding by the provider
|OK
|----
|Reverse Media Negotiation
|OK
|----
|CGPN can be suppressed
|OK
|----
|CLIP no screening
|OK
|----
|'''Long time call possible(>30 min)'''
|OK
|----
|'''External Transfer'''
|OK
|----
|NAT Detection
|OK
|----
|Redundancy
|NA
|----
|SIP over TCP
|OK
|----
|'''Voice Quality OK?'''
|OK
|}

=== Direct Dial In ===

{| border="1"
!Tested feature
!Result
|----
|'''Inbound(Provider -> Innovaphone)'''
|OK
|----
|'''Outbound(Innovaphone -> Provider)'''
|OK
|----
|'''Loop In call(Innovaphone -> Provider -> Innovaphone)'''
|OK
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|'''DTMF tones sent correctly via RTP-events(RFC 2833)'''
|OK
|----
|DTMF tones sent correctly via SIP-Info
|OK
|----
|'''DTMF tones received correctly via RTP-events(RFC 2833)'''
|OK
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be put on hold'''
|
|----
|Held end hears music on hold / announcement from PBX
|
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|
|----
|Held end hears music on hold
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|
|----
|Held end hears music on hold or dialling tone
|
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Result
|----
|Call can be transferred
|
|----
|Held end hears dialling tone
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|}

=== CFU / CFB Transfer ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be forward'''
|
|----
|'''Held end hears dialling tone'''
|
|}

=== CFNR / Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred or forward'''
|
|----
|'''Held end hears dialling tone'''
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|'''Caller can make a call to a Broadcast Group'''
|
|----
|'''Caller can make a call to a Waiting Queue'''
|
|----
|'''Announcement if nobody picks up the call'''
|
|}

== Configuration ==

===Firmware version===

All innovaphone devices use Vx build xx-xxxxx as firmware.

=== SIP - Trunk ===

=== Number Mapping ===

=== Route Settings ===

=== Media Relay ===

=== Fax ===

[[Category:Compat|{{PAGENAME}}]]

Howto:Belgacall - Spike Technics - SIP Provider

2014-08-21T14:38:09Z

Joostlauwen: /* Direct Dial In */

[[Image:3rdPartyGoldfischglas 03.png|right]]

'''Innovaphone Compatibility Test Report'''

== Summary ==

'''SIP Provider: Spike Technics'''


== Current test state ==


{{Template:Compat Status "in progress"}}









== Testing Enviroment ==

[[Image:SIPProviderTestTopology1.PNG]]

This scenario describes a setup where the PBX and phones are in a private network.

There are 3 major configuration variants of the SIP trunk, which one is used depends on the test results. The variants are:

* the SIP trunk is configured without Media Relay and without exclusive coder. This is the case if all tests were successful
* the SIP trunk is configured with Media Relay and STUN but without exclusive coder. This is the case when the test for "NAT Traversal" fails
* the SIP trunk is configured with Media Relay and exclusive coder. This is the case when the test for "Reverse Media Negotiation" fails

The test scenario should describe which SIP trunk configuration is needed.

== Test Results ==

For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|'''call using g711a'''
|OK
|----
|'''call using g711u'''
|OK
|----
|call using g723
|NA
|----
|call using g729
|OK
|----
|call using g722
|NA
|----
|Overlapped sending
|Nok
|----
|'''early media channel'''
|OK
|----
|Fax using T.38
|OK
|----
|T.38 Transcoding by the provider
|OK
|----
|Reverse Media Negotiation
|OK
|----
|CGPN can be suppressed
|OK
|----
|CLIP no screening
|OK
|----
|'''Long time call possible(>30 min)'''
|OK
|----
|'''External Transfer'''
|OK
|----
|NAT Detection
|OK
|----
|Redundancy
|NA
|----
|SIP over TCP
|OK
|----
|'''Voice Quality OK?'''
|OK
|}

=== Direct Dial In ===

{| border="1"
!Tested feature
!Result
|----
|'''Inbound(Provider -> Innovaphone)'''
|OK
|----
|'''Outbound(Innovaphone -> Provider)'''
|OK
|----
|'''Loop In call(Innovaphone -> Provider -> Innovaphone)'''
|OK
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|'''DTMF tones sent correctly via RTP-events(RFC 2833)'''
|
|----
|DTMF tones sent correctly via SIP-Info
|
|----
|'''DTMF tones received correctly via RTP-events(RFC 2833)'''
|
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be put on hold'''
|
|----
|Held end hears music on hold / announcement from PBX
|
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|
|----
|Held end hears music on hold
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|
|----
|Held end hears music on hold or dialling tone
|
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Result
|----
|Call can be transferred
|
|----
|Held end hears dialling tone
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|}

=== CFU / CFB Transfer ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be forward'''
|
|----
|'''Held end hears dialling tone'''
|
|}

=== CFNR / Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred or forward'''
|
|----
|'''Held end hears dialling tone'''
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|'''Caller can make a call to a Broadcast Group'''
|
|----
|'''Caller can make a call to a Waiting Queue'''
|
|----
|'''Announcement if nobody picks up the call'''
|
|}

== Configuration ==

===Firmware version===

All innovaphone devices use Vx build xx-xxxxx as firmware.

=== SIP - Trunk ===

=== Number Mapping ===

=== Route Settings ===

=== Media Relay ===

=== Fax ===

[[Category:Compat|{{PAGENAME}}]]

Howto:Belgacall - Spike Technics - SIP Provider

2014-08-21T14:37:16Z

Joostlauwen: /* Basic Call */

[[Image:3rdPartyGoldfischglas 03.png|right]]

'''Innovaphone Compatibility Test Report'''

== Summary ==

'''SIP Provider: Spike Technics'''


== Current test state ==


{{Template:Compat Status "in progress"}}









== Testing Enviroment ==

[[Image:SIPProviderTestTopology1.PNG]]

This scenario describes a setup where the PBX and phones are in a private network.

There are 3 major configuration variants of the SIP trunk, which one is used depends on the test results. The variants are:

* the SIP trunk is configured without Media Relay and without exclusive coder. This is the case if all tests were successful
* the SIP trunk is configured with Media Relay and STUN but without exclusive coder. This is the case when the test for "NAT Traversal" fails
* the SIP trunk is configured with Media Relay and exclusive coder. This is the case when the test for "Reverse Media Negotiation" fails

The test scenario should describe which SIP trunk configuration is needed.

== Test Results ==

For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|'''call using g711a'''
|OK
|----
|'''call using g711u'''
|OK
|----
|call using g723
|NA
|----
|call using g729
|OK
|----
|call using g722
|NA
|----
|Overlapped sending
|Nok
|----
|'''early media channel'''
|OK
|----
|Fax using T.38
|OK
|----
|T.38 Transcoding by the provider
|OK
|----
|Reverse Media Negotiation
|OK
|----
|CGPN can be suppressed
|OK
|----
|CLIP no screening
|OK
|----
|'''Long time call possible(>30 min)'''
|OK
|----
|'''External Transfer'''
|OK
|----
|NAT Detection
|OK
|----
|Redundancy
|NA
|----
|SIP over TCP
|OK
|----
|'''Voice Quality OK?'''
|OK
|}

=== Direct Dial In ===

{| border="1"
!Tested feature
!Result
|----
|'''Inbound(Provider -> Innovaphone)'''
|
|----
|'''Outbound(Innovaphone -> Provider)'''
|
|----
|'''Loop In call(Innovaphone -> Provider -> Innovaphone)'''
|
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|'''DTMF tones sent correctly via RTP-events(RFC 2833)'''
|
|----
|DTMF tones sent correctly via SIP-Info
|
|----
|'''DTMF tones received correctly via RTP-events(RFC 2833)'''
|
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be put on hold'''
|
|----
|Held end hears music on hold / announcement from PBX
|
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|
|----
|Held end hears music on hold
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|
|----
|Held end hears music on hold or dialling tone
|
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Result
|----
|Call can be transferred
|
|----
|Held end hears dialling tone
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|}

=== CFU / CFB Transfer ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be forward'''
|
|----
|'''Held end hears dialling tone'''
|
|}

=== CFNR / Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred or forward'''
|
|----
|'''Held end hears dialling tone'''
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|'''Caller can make a call to a Broadcast Group'''
|
|----
|'''Caller can make a call to a Waiting Queue'''
|
|----
|'''Announcement if nobody picks up the call'''
|
|}

== Configuration ==

===Firmware version===

All innovaphone devices use Vx build xx-xxxxx as firmware.

=== SIP - Trunk ===

=== Number Mapping ===

=== Route Settings ===

=== Media Relay ===

=== Fax ===

[[Category:Compat|{{PAGENAME}}]]

Howto:Belgacall - Spike Technics - SIP Provider

2014-08-21T08:55:01Z

Joostlauwen: /* Basic Call */

[[Image:3rdPartyGoldfischglas 03.png|right]]

'''Innovaphone Compatibility Test Report'''

== Summary ==

'''SIP Provider: Spike Technics'''


== Current test state ==


{{Template:Compat Status "in progress"}}









== Testing Enviroment ==

[[Image:SIPProviderTestTopology1.PNG]]

This scenario describes a setup where the PBX and phones are in a private network.

There are 3 major configuration variants of the SIP trunk, which one is used depends on the test results. The variants are:

* the SIP trunk is configured without Media Relay and without exclusive coder. This is the case if all tests were successful
* the SIP trunk is configured with Media Relay and STUN but without exclusive coder. This is the case when the test for "NAT Traversal" fails
* the SIP trunk is configured with Media Relay and exclusive coder. This is the case when the test for "Reverse Media Negotiation" fails

The test scenario should describe which SIP trunk configuration is needed.

== Test Results ==

For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|'''call using g711a'''
|OK
|----
|'''call using g711u'''
|OK
|----
|call using g723
|NA
|----
|call using g729
|OK
|----
|call using g722
|NA
|----
|Overlapped sending
|
|----
|'''early media channel'''
|
|----
|Fax using T.38
|
|----
|T.38 Transcoding by the provider
|
|----
|Reverse Media Negotiation
|
|----
|CGPN can be suppressed
|
|----
|CLIP no screening
|
|----
|'''Long time call possible(>30 min)'''
|OK
|----
|'''External Transfer'''
|
|----
|NAT Detection
|
|----
|Redundancy
|
|----
|SIP over TCP
|OK
|----
|'''Voice Quality OK?'''
|OK
|}

=== Direct Dial In ===

{| border="1"
!Tested feature
!Result
|----
|'''Inbound(Provider -> Innovaphone)'''
|
|----
|'''Outbound(Innovaphone -> Provider)'''
|
|----
|'''Loop In call(Innovaphone -> Provider -> Innovaphone)'''
|
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|'''DTMF tones sent correctly via RTP-events(RFC 2833)'''
|
|----
|DTMF tones sent correctly via SIP-Info
|
|----
|'''DTMF tones received correctly via RTP-events(RFC 2833)'''
|
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be put on hold'''
|
|----
|Held end hears music on hold / announcement from PBX
|
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|
|----
|Held end hears music on hold
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|
|----
|Held end hears music on hold or dialling tone
|
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Result
|----
|Call can be transferred
|
|----
|Held end hears dialling tone
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|}

=== CFU / CFB Transfer ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be forward'''
|
|----
|'''Held end hears dialling tone'''
|
|}

=== CFNR / Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred or forward'''
|
|----
|'''Held end hears dialling tone'''
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|'''Caller can make a call to a Broadcast Group'''
|
|----
|'''Caller can make a call to a Waiting Queue'''
|
|----
|'''Announcement if nobody picks up the call'''
|
|}

== Configuration ==

===Firmware version===

All innovaphone devices use Vx build xx-xxxxx as firmware.

=== SIP - Trunk ===

=== Number Mapping ===

=== Route Settings ===

=== Media Relay ===

=== Fax ===

[[Category:Compat|{{PAGENAME}}]]

Howto:Belgacall - Spike Technics - SIP Provider

2014-08-21T08:54:14Z

Joostlauwen: /* Basic Call */

[[Image:3rdPartyGoldfischglas 03.png|right]]

'''Innovaphone Compatibility Test Report'''

== Summary ==

'''SIP Provider: Spike Technics'''


== Current test state ==


{{Template:Compat Status "in progress"}}









== Testing Enviroment ==

[[Image:SIPProviderTestTopology1.PNG]]

This scenario describes a setup where the PBX and phones are in a private network.

There are 3 major configuration variants of the SIP trunk, which one is used depends on the test results. The variants are:

* the SIP trunk is configured without Media Relay and without exclusive coder. This is the case if all tests were successful
* the SIP trunk is configured with Media Relay and STUN but without exclusive coder. This is the case when the test for "NAT Traversal" fails
* the SIP trunk is configured with Media Relay and exclusive coder. This is the case when the test for "Reverse Media Negotiation" fails

The test scenario should describe which SIP trunk configuration is needed.

== Test Results ==

For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|'''call using g711a'''
|OK
|----
|'''call using g711u'''
|
|----
|call using g723
|
|----
|call using g729
|
|----
|call using g722
|
|----
|Overlapped sending
|
|----
|'''early media channel'''
|
|----
|Fax using T.38
|
|----
|T.38 Transcoding by the provider
|
|----
|Reverse Media Negotiation
|
|----
|CGPN can be suppressed
|
|----
|CLIP no screening
|
|----
|'''Long time call possible(>30 min)'''
|
|----
|'''External Transfer'''
|
|----
|NAT Detection
|
|----
|Redundancy
|
|----
|SIP over TCP
|
|----
|'''Voice Quality OK?'''
|
|}

=== Direct Dial In ===

{| border="1"
!Tested feature
!Result
|----
|'''Inbound(Provider -> Innovaphone)'''
|
|----
|'''Outbound(Innovaphone -> Provider)'''
|
|----
|'''Loop In call(Innovaphone -> Provider -> Innovaphone)'''
|
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|'''DTMF tones sent correctly via RTP-events(RFC 2833)'''
|
|----
|DTMF tones sent correctly via SIP-Info
|
|----
|'''DTMF tones received correctly via RTP-events(RFC 2833)'''
|
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be put on hold'''
|
|----
|Held end hears music on hold / announcement from PBX
|
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|
|----
|Held end hears music on hold
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|
|----
|Held end hears music on hold or dialling tone
|
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Result
|----
|Call can be transferred
|
|----
|Held end hears dialling tone
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|}

=== CFU / CFB Transfer ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be forward'''
|
|----
|'''Held end hears dialling tone'''
|
|}

=== CFNR / Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred or forward'''
|
|----
|'''Held end hears dialling tone'''
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|'''Caller can make a call to a Broadcast Group'''
|
|----
|'''Caller can make a call to a Waiting Queue'''
|
|----
|'''Announcement if nobody picks up the call'''
|
|}

== Configuration ==

===Firmware version===

All innovaphone devices use Vx build xx-xxxxx as firmware.

=== SIP - Trunk ===

=== Number Mapping ===

=== Route Settings ===

=== Media Relay ===

=== Fax ===

[[Category:Compat|{{PAGENAME}}]]

Howto:Belgacall - Spike Technics - SIP Provider

2014-08-21T08:53:58Z

Joostlauwen: /* Basic Call */

[[Image:3rdPartyGoldfischglas 03.png|right]]

'''Innovaphone Compatibility Test Report'''

== Summary ==

'''SIP Provider: Spike Technics'''


== Current test state ==


{{Template:Compat Status "in progress"}}









== Testing Enviroment ==

[[Image:SIPProviderTestTopology1.PNG]]

This scenario describes a setup where the PBX and phones are in a private network.

There are 3 major configuration variants of the SIP trunk, which one is used depends on the test results. The variants are:

* the SIP trunk is configured without Media Relay and without exclusive coder. This is the case if all tests were successful
* the SIP trunk is configured with Media Relay and STUN but without exclusive coder. This is the case when the test for "NAT Traversal" fails
* the SIP trunk is configured with Media Relay and exclusive coder. This is the case when the test for "Reverse Media Negotiation" fails

The test scenario should describe which SIP trunk configuration is needed.

== Test Results ==

For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.

{{FIXME|reason=Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report}}

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|'''call using g711a'''OK
|
|----
|'''call using g711u'''
|
|----
|call using g723
|
|----
|call using g729
|
|----
|call using g722
|
|----
|Overlapped sending
|
|----
|'''early media channel'''
|
|----
|Fax using T.38
|
|----
|T.38 Transcoding by the provider
|
|----
|Reverse Media Negotiation
|
|----
|CGPN can be suppressed
|
|----
|CLIP no screening
|
|----
|'''Long time call possible(>30 min)'''
|
|----
|'''External Transfer'''
|
|----
|NAT Detection
|
|----
|Redundancy
|
|----
|SIP over TCP
|
|----
|'''Voice Quality OK?'''
|
|}

=== Direct Dial In ===

{| border="1"
!Tested feature
!Result
|----
|'''Inbound(Provider -> Innovaphone)'''
|
|----
|'''Outbound(Innovaphone -> Provider)'''
|
|----
|'''Loop In call(Innovaphone -> Provider -> Innovaphone)'''
|
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|'''DTMF tones sent correctly via RTP-events(RFC 2833)'''
|
|----
|DTMF tones sent correctly via SIP-Info
|
|----
|'''DTMF tones received correctly via RTP-events(RFC 2833)'''
|
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be put on hold'''
|
|----
|Held end hears music on hold / announcement from PBX
|
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|
|----
|Held end hears music on hold
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred'''
|
|----
|Held end hears music on hold or dialling tone
|
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
!MoH Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Result
|----
|Call can be transferred
|
|----
|Held end hears dialling tone
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|----
|inno1 calls PSTN-phone. inno1 transfers to inno2.
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|----
|PSTN-phone calls inno1. PSTN-phone transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|}

=== CFU / CFB Transfer ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be forward'''
|
|----
|'''Held end hears dialling tone'''
|
|}

=== CFNR / Blind Transfer (alerting only)===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transferred or forward'''
|
|----
|'''Held end hears dialling tone'''
|
|}

The following tests are made to test if call transfer is working.

{| border="1"
!Tested feature
!Voice Ok?
|----
|inno1 calls inno2. inno2 transfers to PSTN-phone.
|
|----
|inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to inno2.
|
|----
|PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.
|
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|'''Caller can make a call to a Broadcast Group'''
|
|----
|'''Caller can make a call to a Waiting Queue'''
|
|----
|'''Announcement if nobody picks up the call'''
|
|}

== Configuration ==

===Firmware version===

All innovaphone devices use Vx build xx-xxxxx as firmware.

=== SIP - Trunk ===

=== Number Mapping ===

=== Route Settings ===

=== Media Relay ===

=== Fax ===

[[Category:Compat|{{PAGENAME}}]]