innovaphone wiki - User contributions [en]

Howto:Arcor-IP Anlagenanschluss - Arcor - SIP Testreport

2017-07-12T13:41:12Z

Pro: /* Configuration 2017 */

'''Innovaphone Compatibility Test Report'''

== Summary ==

'''SIP Provider: Arcor'''

The provider supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F#SIP_Provider|recommended SIP Provider]].

Arcor does not support the T.38 protocol, therefore you cannot send faxes using this SIP trunk.

That beeing said, the provider has achieved 87% of all possible test points. For more information on the test rating, please refer to [[Howto:SIP_Interop_Test_Description#Summary|Test Description]]

* Features:

** Direct Dial In
** DTMF

* Supported Codecs by the provider
** G711
** G729

==Certification Status==



{{Template:Compat Status "certified"|certificate=Arcor-IP Anlagenanschluss - Arcor - SIP Provider_-_Desc-arcor-cert.pdf}}



Testing of this product has been finalized August 20th, 2008.

== Testing Enviroment ==

=== Scenario ===
This scenario tries to be as simple as possible. The IP - PBX and the phones are all in the same network, having public IP - adresses.
The signalling channel will pass through the PBX, the media channel will go from endpoint (phone) to endpoint (provider).

[[Image:CompatProviderSIP-1.JPG|700px]]

== Test Results ==

For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|'''call using g711a'''
|'''Yes'''
|----
|'''call using g711u'''
|'''Yes'''
|----
|call using g723
|No
|----
|call using g729
|Yes
|----
|Overlapped sending
|No
|----
|'''early media channel'''
|'''Yes'''
|----
|Fax using T.38
|No
|----
|CGPN can be supressed
|No
|----
|'''Reverse Media Negotiaton'''
|'''Yes'''
|----
|'''Voice Quality OK?'''
|'''Yes'''
|}

=== Direct Dial In ===

{| border="1"
!Tested feature
!Result
|----
|'''Inbound(Provider -> Innovaphone)'''
|'''Yes'''
|----
|'''Outbound(Innovaphone -> Provider)'''
|'''Yes'''
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|'''DTMF tones sent correctly'''
|'''Yes'''
|----
|'''DTMF tones received correctly'''
|'''Yes'''
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be put on hold'''
|'''Yes'''
|----
|Held end hears music on hold / announcement from PBX
|Yes
|----
|Held end hears music on hold / announcement from provider
|N/A
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transfered'''
|'''Yes'''
|----
|Held end hears music on hold
|Yes
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|'''Yes'''
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transfered'''
|'''Yes'''
|----
|Held end hears music on hold or dialing tone
|Yes
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|'''Yes'''
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Result
|----
|Call can be transfered
|Yes
|----
|Held end hears dialing tone
|No
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|'''Caller can make a call to a Broadcast Group'''
|'''Yes'''
|----
|'''Caller can make a call to a Waiting Queue'''
|'''Yes'''
|----
|'''Announcement if nobody picks up the call'''
|'''Yes'''
|}

== Configuration ==

===Firmware version===

All innovaphone devices use V6 SR2 HF7 as firmware.

=== SIP - Trunk ===

First of all the SIP Trunk must be configured. Since Arcor authenticates a user account only by IP - Address, you cannot use the normal SIP-Gateway object. You need to configure a GW without registration and route the calls to the PBX.

[[Image:Arcor-IP Anlagenanschluss - Arcor - SIP Testreport 1.PNG]]

=== Number Mapping ===

[[Image:Arcor-IP Anlagenanschluss - Arcor - SIP Testreport 2.PNG]]

=== Route Settings ===

Because Arcor, as most SIP - Providers too, doesn't support overlap sending, you must enable the blockwise sending of the phone number. You can do this by enabling ''Force enblock'' in your routes.

The second setting you must check is Interworking(QSIG,SIP). This feature must be enabled to properly relay suplementary services, like Hold over the SIP Trunk. If this checkbox is unchecked only basic call Information like connect and disconnect will be forwarded by the Gateway.

[[Image:Arcor-IP Anlagenanschluss - Arcor - SIP Testreport 3.PNG]]

== Configuration 2017 Arcor/Vodafone ==

===Firmware version===
12r1 sr11

===SIP-Trunk===
http://wiki.innovaphone.com/img_auth.php/e/ee/1siptrunk.png

=== Number Mapping ===
http://wiki.innovaphone.com/img_auth.php/8/8a/2numberplan.png

=== Route Settings ===
http://wiki.innovaphone.com/img_auth.php/7/7f/3routes.png

At the last Point (-> SIP1:VodafoneSIP) add the UUI:
<sip:+49789123450@DOMAIN-FROM-ARCOR;user=phone>

[[Category:Compat|{{PAGENAME}}]]

Howto:Arcor-IP Anlagenanschluss - Arcor - SIP Testreport

2017-07-12T13:40:42Z

Pro: /* Route Settings */

'''Innovaphone Compatibility Test Report'''

== Summary ==

'''SIP Provider: Arcor'''

The provider supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F#SIP_Provider|recommended SIP Provider]].

Arcor does not support the T.38 protocol, therefore you cannot send faxes using this SIP trunk.

That beeing said, the provider has achieved 87% of all possible test points. For more information on the test rating, please refer to [[Howto:SIP_Interop_Test_Description#Summary|Test Description]]

* Features:

** Direct Dial In
** DTMF

* Supported Codecs by the provider
** G711
** G729

==Certification Status==



{{Template:Compat Status "certified"|certificate=Arcor-IP Anlagenanschluss - Arcor - SIP Provider_-_Desc-arcor-cert.pdf}}



Testing of this product has been finalized August 20th, 2008.

== Testing Enviroment ==

=== Scenario ===
This scenario tries to be as simple as possible. The IP - PBX and the phones are all in the same network, having public IP - adresses.
The signalling channel will pass through the PBX, the media channel will go from endpoint (phone) to endpoint (provider).

[[Image:CompatProviderSIP-1.JPG|700px]]

== Test Results ==

For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|'''call using g711a'''
|'''Yes'''
|----
|'''call using g711u'''
|'''Yes'''
|----
|call using g723
|No
|----
|call using g729
|Yes
|----
|Overlapped sending
|No
|----
|'''early media channel'''
|'''Yes'''
|----
|Fax using T.38
|No
|----
|CGPN can be supressed
|No
|----
|'''Reverse Media Negotiaton'''
|'''Yes'''
|----
|'''Voice Quality OK?'''
|'''Yes'''
|}

=== Direct Dial In ===

{| border="1"
!Tested feature
!Result
|----
|'''Inbound(Provider -> Innovaphone)'''
|'''Yes'''
|----
|'''Outbound(Innovaphone -> Provider)'''
|'''Yes'''
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|'''DTMF tones sent correctly'''
|'''Yes'''
|----
|'''DTMF tones received correctly'''
|'''Yes'''
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be put on hold'''
|'''Yes'''
|----
|Held end hears music on hold / announcement from PBX
|Yes
|----
|Held end hears music on hold / announcement from provider
|N/A
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transfered'''
|'''Yes'''
|----
|Held end hears music on hold
|Yes
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|'''Yes'''
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transfered'''
|'''Yes'''
|----
|Held end hears music on hold or dialing tone
|Yes
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|'''Yes'''
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Result
|----
|Call can be transfered
|Yes
|----
|Held end hears dialing tone
|No
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|'''Caller can make a call to a Broadcast Group'''
|'''Yes'''
|----
|'''Caller can make a call to a Waiting Queue'''
|'''Yes'''
|----
|'''Announcement if nobody picks up the call'''
|'''Yes'''
|}

== Configuration ==

===Firmware version===

All innovaphone devices use V6 SR2 HF7 as firmware.

=== SIP - Trunk ===

First of all the SIP Trunk must be configured. Since Arcor authenticates a user account only by IP - Address, you cannot use the normal SIP-Gateway object. You need to configure a GW without registration and route the calls to the PBX.

[[Image:Arcor-IP Anlagenanschluss - Arcor - SIP Testreport 1.PNG]]

=== Number Mapping ===

[[Image:Arcor-IP Anlagenanschluss - Arcor - SIP Testreport 2.PNG]]

=== Route Settings ===

Because Arcor, as most SIP - Providers too, doesn't support overlap sending, you must enable the blockwise sending of the phone number. You can do this by enabling ''Force enblock'' in your routes.

The second setting you must check is Interworking(QSIG,SIP). This feature must be enabled to properly relay suplementary services, like Hold over the SIP Trunk. If this checkbox is unchecked only basic call Information like connect and disconnect will be forwarded by the Gateway.

[[Image:Arcor-IP Anlagenanschluss - Arcor - SIP Testreport 3.PNG]]

== Configuration 2017 ==

===Firmware version===
12r1 sr11

===SIP-Trunk===
http://wiki.innovaphone.com/img_auth.php/e/ee/1siptrunk.png

=== Number Mapping ===
http://wiki.innovaphone.com/img_auth.php/8/8a/2numberplan.png

=== Route Settings ===
http://wiki.innovaphone.com/img_auth.php/7/7f/3routes.png

At the last Point (-> SIP1:VodafoneSIP) add the UUI:
<sip:+49789123450@DOMAIN-FROM-ARCOR;user=phone>

[[Category:Compat|{{PAGENAME}}]]

Howto:Arcor-IP Anlagenanschluss - Arcor - SIP Testreport

2017-07-12T13:39:47Z

Pro: /* Configuration 2017 */

'''Innovaphone Compatibility Test Report'''

== Summary ==

'''SIP Provider: Arcor'''

The provider supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F#SIP_Provider|recommended SIP Provider]].

Arcor does not support the T.38 protocol, therefore you cannot send faxes using this SIP trunk.

That beeing said, the provider has achieved 87% of all possible test points. For more information on the test rating, please refer to [[Howto:SIP_Interop_Test_Description#Summary|Test Description]]

* Features:

** Direct Dial In
** DTMF

* Supported Codecs by the provider
** G711
** G729

==Certification Status==



{{Template:Compat Status "certified"|certificate=Arcor-IP Anlagenanschluss - Arcor - SIP Provider_-_Desc-arcor-cert.pdf}}



Testing of this product has been finalized August 20th, 2008.

== Testing Enviroment ==

=== Scenario ===
This scenario tries to be as simple as possible. The IP - PBX and the phones are all in the same network, having public IP - adresses.
The signalling channel will pass through the PBX, the media channel will go from endpoint (phone) to endpoint (provider).

[[Image:CompatProviderSIP-1.JPG|700px]]

== Test Results ==

For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|'''call using g711a'''
|'''Yes'''
|----
|'''call using g711u'''
|'''Yes'''
|----
|call using g723
|No
|----
|call using g729
|Yes
|----
|Overlapped sending
|No
|----
|'''early media channel'''
|'''Yes'''
|----
|Fax using T.38
|No
|----
|CGPN can be supressed
|No
|----
|'''Reverse Media Negotiaton'''
|'''Yes'''
|----
|'''Voice Quality OK?'''
|'''Yes'''
|}

=== Direct Dial In ===

{| border="1"
!Tested feature
!Result
|----
|'''Inbound(Provider -> Innovaphone)'''
|'''Yes'''
|----
|'''Outbound(Innovaphone -> Provider)'''
|'''Yes'''
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|'''DTMF tones sent correctly'''
|'''Yes'''
|----
|'''DTMF tones received correctly'''
|'''Yes'''
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be put on hold'''
|'''Yes'''
|----
|Held end hears music on hold / announcement from PBX
|Yes
|----
|Held end hears music on hold / announcement from provider
|N/A
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transfered'''
|'''Yes'''
|----
|Held end hears music on hold
|Yes
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|'''Yes'''
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transfered'''
|'''Yes'''
|----
|Held end hears music on hold or dialing tone
|Yes
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|'''Yes'''
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Result
|----
|Call can be transfered
|Yes
|----
|Held end hears dialing tone
|No
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|'''Caller can make a call to a Broadcast Group'''
|'''Yes'''
|----
|'''Caller can make a call to a Waiting Queue'''
|'''Yes'''
|----
|'''Announcement if nobody picks up the call'''
|'''Yes'''
|}

== Configuration ==

===Firmware version===

All innovaphone devices use V6 SR2 HF7 as firmware.

=== SIP - Trunk ===

First of all the SIP Trunk must be configured. Since Arcor authenticates a user account only by IP - Address, you cannot use the normal SIP-Gateway object. You need to configure a GW without registration and route the calls to the PBX.

[[Image:Arcor-IP Anlagenanschluss - Arcor - SIP Testreport 1.PNG]]

=== Number Mapping ===

[[Image:Arcor-IP Anlagenanschluss - Arcor - SIP Testreport 2.PNG]]

=== Route Settings ===

Because Arcor, as most SIP - Providers too, doesn't support overlap sending, you must enable the blockwise sending of the phone number. You can do this by enabling ''Force enblock'' in your routes.

The second setting you must check is Interworking(QSIG,SIP). This feature must be enabled to properly relay suplementary services, like Hold over the SIP Trunk. If this checkbox is unchecked only basic call Information like connect and disconnect will be forwarded by the Gateway.

[[Image:Arcor-IP Anlagenanschluss - Arcor - SIP Testreport 3.PNG]]

== Configuration 2017 ==

===Firmware version===
12r1 sr11

===SIP-Trunk===
http://wiki.innovaphone.com/img_auth.php/e/ee/1siptrunk.png

=== Number Mapping ===
http://wiki.innovaphone.com/img_auth.php/8/8a/2numberplan.png

=== Route Settings ===
http://wiki.innovaphone.com/img_auth.php/7/7f/3routes.png

UUI = <sip:+49789123450@DOMAIN-FROM-ARCOR;user=phone>

[[Category:Compat|{{PAGENAME}}]]

Howto:Arcor-IP Anlagenanschluss - Arcor - SIP Testreport

2017-07-12T13:38:56Z

Pro:

'''Innovaphone Compatibility Test Report'''

== Summary ==

'''SIP Provider: Arcor'''

The provider supports all required innovaphone features and is therefore qualified as [[Howto:What_is_a_%22recommended_product%22%3F#SIP_Provider|recommended SIP Provider]].

Arcor does not support the T.38 protocol, therefore you cannot send faxes using this SIP trunk.

That beeing said, the provider has achieved 87% of all possible test points. For more information on the test rating, please refer to [[Howto:SIP_Interop_Test_Description#Summary|Test Description]]

* Features:

** Direct Dial In
** DTMF

* Supported Codecs by the provider
** G711
** G729

==Certification Status==



{{Template:Compat Status "certified"|certificate=Arcor-IP Anlagenanschluss - Arcor - SIP Provider_-_Desc-arcor-cert.pdf}}



Testing of this product has been finalized August 20th, 2008.

== Testing Enviroment ==

=== Scenario ===
This scenario tries to be as simple as possible. The IP - PBX and the phones are all in the same network, having public IP - adresses.
The signalling channel will pass through the PBX, the media channel will go from endpoint (phone) to endpoint (provider).

[[Image:CompatProviderSIP-1.JPG|700px]]

== Test Results ==

For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria.

=== Basic Call ===

{| border="1"
!Tested feature
!Result
|----
|'''call using g711a'''
|'''Yes'''
|----
|'''call using g711u'''
|'''Yes'''
|----
|call using g723
|No
|----
|call using g729
|Yes
|----
|Overlapped sending
|No
|----
|'''early media channel'''
|'''Yes'''
|----
|Fax using T.38
|No
|----
|CGPN can be supressed
|No
|----
|'''Reverse Media Negotiaton'''
|'''Yes'''
|----
|'''Voice Quality OK?'''
|'''Yes'''
|}

=== Direct Dial In ===

{| border="1"
!Tested feature
!Result
|----
|'''Inbound(Provider -> Innovaphone)'''
|'''Yes'''
|----
|'''Outbound(Innovaphone -> Provider)'''
|'''Yes'''
|}

=== DTMF ===

{| border="1"
!Tested feature
!Result
|----
|'''DTMF tones sent correctly'''
|'''Yes'''
|----
|'''DTMF tones received correctly'''
|'''Yes'''
|}

=== Hold/Retrieve ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be put on hold'''
|'''Yes'''
|----
|Held end hears music on hold / announcement from PBX
|Yes
|----
|Held end hears music on hold / announcement from provider
|N/A
|}

=== Transfer with consultation ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transfered'''
|'''Yes'''
|----
|Held end hears music on hold
|Yes
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|'''Yes'''
|}

=== Transfer with consultation (alerting only) ===

{| border="1"
!Tested feature
!Result
|----
|'''Call can be transfered'''
|'''Yes'''
|----
|Held end hears music on hold or dialing tone
|Yes
|----
|'''Call returns to transferring device if the third'''
'''Endpoint is not available'''
|'''Yes'''
|}

=== Blind Transfer ===

{| border="1"
!Tested feature
!Result
|----
|Call can be transfered
|Yes
|----
|Held end hears dialing tone
|No
|}

=== Broadcast Group & Waiting Queue ===

{| border="1"
!Tested feature
!Result
|----
|'''Caller can make a call to a Broadcast Group'''
|'''Yes'''
|----
|'''Caller can make a call to a Waiting Queue'''
|'''Yes'''
|----
|'''Announcement if nobody picks up the call'''
|'''Yes'''
|}

== Configuration ==

===Firmware version===

All innovaphone devices use V6 SR2 HF7 as firmware.

=== SIP - Trunk ===

First of all the SIP Trunk must be configured. Since Arcor authenticates a user account only by IP - Address, you cannot use the normal SIP-Gateway object. You need to configure a GW without registration and route the calls to the PBX.

[[Image:Arcor-IP Anlagenanschluss - Arcor - SIP Testreport 1.PNG]]

=== Number Mapping ===

[[Image:Arcor-IP Anlagenanschluss - Arcor - SIP Testreport 2.PNG]]

=== Route Settings ===

Because Arcor, as most SIP - Providers too, doesn't support overlap sending, you must enable the blockwise sending of the phone number. You can do this by enabling ''Force enblock'' in your routes.

The second setting you must check is Interworking(QSIG,SIP). This feature must be enabled to properly relay suplementary services, like Hold over the SIP Trunk. If this checkbox is unchecked only basic call Information like connect and disconnect will be forwarded by the Gateway.

[[Image:Arcor-IP Anlagenanschluss - Arcor - SIP Testreport 3.PNG]]

== Configuration 2017 ==

===Firmware version===
12r1 sr11

===SIP-Trunk===
http://wiki.innovaphone.com/img_auth.php/thumb/e/ee/1siptrunk.png/800px-1siptrunk.png

=== Number Mapping ===
http://wiki.innovaphone.com/img_auth.php/8/8a/2numberplan.png

=== Route Settings ===
http://wiki.innovaphone.com/img_auth.php/thumb/7/7f/3routes.png/800px-3routes.png

UUI = <sip:+49789123450@DOMAIN-FROM-ARCOR;user=phone>

[[Category:Compat|{{PAGENAME}}]]

File:3routes.png

2017-07-12T13:29:50Z

Pro: arcor/vodafone sip trunk

arcor/vodafone sip trunk

File:2numberplan.png

2017-07-12T13:29:34Z

Pro: arcor/vodafone sip trunk

arcor/vodafone sip trunk

File:1siptrunk.png

2017-07-12T13:27:53Z

Pro: arcor/vodafone sip trunk

arcor/vodafone sip trunk