Howto:Nokia Mobile Phones E Series

From innovaphone wiki
Jump to navigation Jump to search

Innovaphone Compatibility Test Report

This Article describes how to connect (and what is working) Nokia E Series Mobile phone (dual-mode phone ) with innovaphone Pbx.

Tested with the Nokia E65

Applies To

This information applies to

  • all innovaphone PBX

Build V6 07-60786, and later

  • Nokia E65

Software version: 1.0633.58.03 and 2.0633.65.01

innovaphone configuration

set a normal user in the PBX

for example

Long Name: E60

Name: E60

Number: 60

Nokia E65:

Settings on Nokia E65

Sip Settings

Navigate to Tools->Settings->Connection->SIP settings:

Profile name: "innovaphone" (or anything else)

Service profile: IETF

Default access point: <your wifi access point>

Public user name: sip:E60@<IP address of your innovaphone pbx>

Use compression: No

Registration: Always on

Use security: No

Proxy server

tools -> settings -> connection -> SIP settings -> Proxy Server


Proxy server address: sip:<IP address of your innovaphone pbx>

Realm: <IP address of your IP800>

User name: E60

Password: <secret>

Allow loose routing: Yes

Transport type: UDP

Port: 5060

Registrar server

tools -> settings -> connection -> SIP settings -> Registrar Server

Registrar serv.addr.:<IP address of your innovaphone pbx>

Realm: <IP address of your innovaphone pbx>

User name: E60

Password: <secret>

Transport type: UDP

Port: 5060

Internet tel settings

tools -> settings -> connection -> Internet tel settings

give the name and profile


For trouble shooting purpose take the option of Wireless LAN

tools -> settings -> connection -> Wireless LAN

Show availability Yes

Scan for Networks every minute

Supported Codecs

Codec Applies
G711 yes
G729 yes
G723 not supported by nokia
G726 not supported by nokia
GSM no
T.38 UDP no
G722 not supported by nokia


Test Results

Tested with innovaphone PBX and innovaphone IP phones connected with H.323 to the PBX

Summary:

  • The voice quality is good - hold/retrieve is working (from Nokia and from innovaphone phone).
  • Transfer with consultation is working (but only when there is no codec change)
  • semi attendant transfer - or so called transfer without consultation is not working
  • Blind transfer is working
  • with Nokia phone version 2.0633.65.01 it is also possibe to transfer the call from the Nokia phone to another endpoint


Basic Call

Tested feature Result
call using g711a yes
call using g711u yes
call using g723 no
call using g729 yes
Overlapped sending yes
early media channel not tested
Fax no
Voice Quality OK? yes


Dial Inward

Tested feature Result
Inbound(nokia -> innovaphone Phone & via isdn) yes
Outbound(innovaphone Phone & via isdn -> nokia) yes


DTMF

Tested feature Result S1
DTMF tones sent correctly yes
DTMF tones received correctly (audible) no


Hold/Retrieve

hold possible with the Nokia phone and the innovaphone phone

Tested feature Result
Device can put call on hold yes
Holding end hears music on hold no - instead one beep tone and information on display that call is on hold
Device can terminate either call and retrieve remaining call yes (nokia device and innovaphone IP Phone)

Transfer with consultation

Transfer only working when there is no codec change

Tested feature Result
Device can transfer call yes
Holding end hears music on hold no-instead one beep tone and information on display that call is on hold
Call returns to transferring device if the third

Endpoint is not available

yes

Transfer with consultation (alerting only)

Tested feature Result
Device can transfer call no
Held end hears music on hold or dialing tone no - instead one beep tone and information on display that call is on hold
Call returns to transferring device if the third

Endpoint is not available

yes


Blind Transfer

Tested feature Result
Device can transfer call yes
Holding end hears dialing tone no instead one beep tone and information on display that call is on hold

Broadcast Group & Waiting Queue

tested also when the nokia phone is part of broadcast & waiting queue

Tested feature Result
Caller can make a call to a broadcast group yes (also when nokia phone is part of)
Caller can make a call to a waiting Queue yes (also when nokia phone is part of)
Announcement if nobody picks up the call yes ( only with same codec)

Calling Party Number

Tested feature Result
CGPN is displayed correctly yes
CGPN can be supressed via pbx - send number changes the cgpn

Known Problems

  • Having a incomming call via the Trunk object and there is T.38 enabled (on the Interface or Gateway) then there is no voice connection to the Nokia Phone. When T.38 is enabled innovaphone sends the sdp offer in two media descriptions - because with that behaviour the nokia phone having problems with parsing the sdp offer.

As workaround you need to route the fax destination calls with CDPN via another gateway into the Pbx (where T.38 is enabled)

  • semi attendant transfer - or so called transfer without consultation is not working.
  • any kind of transfer with codec change is not working - try to avoid codec changes when using Nokia phones (so all phones ,gateway settings and waiting queue announcements should use the same codec )

Music on hold is not affected because the Nokia phone does not play it - instead it shows call on hold on the phone display.

Additional Info

To check your latest software version press *#0000# on your nokia phone and go to http://europe.nokia.com/A4577224

Retrieved from "https://wiki.innovaphone.com/index.php?title=Howto:Nokia_Mobile_Phones_E_Series&oldid=7675"