Howto:Peoplefone SIP-Trunk - SIP Provider Compatibility Test

From innovaphone wiki
Jump to navigation Jump to search
3rdPartyGoldfischglas 03.png

Innovaphone Compatibility Test Report

Summary

SIP Provider: Peoplefone

The provider was tested by our partner inikon. This product is listed due to a customer testimonial. No tests have been conducted by innovaphone. The provider supports all required innovaphone features and is therefore qualified as recommended SIP Provider.


That being said, the provider has achieved 93% of all possible test points (136/146). For more information on the test rating, please refer to Test Description


  • Features:
    • Direct Dial In
    • Fax over IP (T.38)
    • DTMF
    • CLIP no screening
    • TSIP
  • Supported Codecs by the provider
    • G711
    • G729
    • G723
    • T.38 UDP

Note: The provider doesn't support Reverse Media Negotiation, making necessary the use of Media Relay.

Current test state

Referralprod.PNGThis product is listed due to a customer testimonial. No tests have been conducted by innovaphone.

Testing of this product has been finalized February 4th, 2014.

Testing Enviroment

HFO SIP Compatibility Test 5.PNG

This scenario describes a setup where the PBX and phones are in a private network.

  • the SIP trunk is configured with Media Relay and exclusive coder. This is the case when the test for "Reverse Media Negotiation" fails

Test Results

For more information on the test procedure, please read the following wiki article: SIP Interop Test Description. Bold lines in the test results indicate a KO-criteria.

Basic Call

Tested feature Result
call using g711a Ok
call using g711u Ok
call using g723 Ok
call using g729 Ok
call using g722 Nok
Overlapped sending Nok
early media channel Ok
Fax using T.38 Ok
Reverse Media Negotiation Nok
CGPN can be suppressed Ok
CLIP no screening Ok (CLIP open)
Long time call possible(>30 min) Ok
External Transfer Ok
NAT Detection Ok
Redundancy N/A
SIP over TCP Ok
Voice Quality OK? Ok

Direct Dial In

Tested feature Result
Inbound(Provider -> Innovaphone) Ok
Outbound(Innovaphone -> Provider) Ok
Loop In call(Innovaphone -> Provider -> Innovaphone) Ok

DTMF

Tested feature Result
DTMF tones sent correctly Ok
DTMF tones sent correctly via SIP-Info Ok
DTMF tones received correctly Ok

Hold/Retrieve

Tested feature Result
Call can be put on hold Ok
Held end hears music on hold / announcement from PBX Ok

Transfer with consultation

Tested feature Result
Call can be transferred Ok
Held end hears music on hold Ok

The following tests are made to test if call transfer is working.

Tested feature Voice Ok? MoH Ok?
inno1 calls inno2. inno2 transfers to PSTN-phone. Ok Ok
inno1 calls PSTN-phone. inno1 transfers to inno2. Ok Ok
inno1 calls PSTN-phone. PSTN-phone transfers to inno2. Ok Ok
PSTN-phone calls inno1. inno1 transfers to inno2. Ok Ok
PSTN-phone calls inno1. PSTN-phone transfers to inno2. Ok Ok
PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2. Ok Ok

Transfer with consultation (alerting only)

Tested feature Result
Call can be transferred Ok
Held end hears music on hold or dialling tone Ok
Call returns to transferring device if the third

Endpoint is not available

Ok

The following tests are made to test if call transfer is working.

Tested feature Voice Ok? MoH Ok?
inno1 calls inno2. inno2 transfers to PSTN-phone. Ok Ok
inno1 calls PSTN-phone. inno1 transfers to inno2. Ok Ok
inno1 calls PSTN-phone. PSTN-phone transfers to inno2. Ok Ok
PSTN-phone calls inno1. inno1 transfers to inno2. Ok Ok
PSTN-phone calls inno1. PSTN-phone transfers to inno2. Ok Ok
PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2. Ok Ok

Blind Transfer

Tested feature Result
Call can be transferred Ok
Held end hears dialling tone Ok

The following tests are made to test if call transfer is working.

Tested feature Voice Ok?
inno1 calls inno2. inno2 transfers to PSTN-phone. Ok
inno1 calls PSTN-phone. inno1 transfers to inno2. Ok
inno1 calls PSTN-phone. PSTN-phone transfers to inno2. Ok
PSTN-phone calls inno1. inno1 transfers to inno2. Ok
PSTN-phone calls inno1. PSTN-phone transfers to inno2. Ok
PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2. Ok

CFU / CFB Transfer

Tested feature Result
Call can be forward Ok
Held end hears dialling tone Ok

CFNR / Blind Transfer (alerting only)

Tested feature Result
Call can be transferred or forward Ok
Held end hears dialling tone Ok

The following tests are made to test if call transfer is working.

Tested feature Voice Ok?
inno1 calls inno2. inno2 transfers to PSTN-phone. Ok
inno1 calls PSTN-phone. PSTN-phone transfers to inno2. Ok
PSTN-phone calls inno1. inno1 transfers to inno2. Ok
PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2. Ok

Broadcast Group & Waiting Queue

Tested feature Result
Caller can make a call to a Broadcast Group Ok
Caller can make a call to a Waiting Queue Ok
Announcement if nobody picks up the call Ok

Configuration

Firmware version

All innovaphone devices use V10sr6 build 10.0970 as firmware.

SIP - Trunk

Peoplefone SIP.png


Peoplefone Trunk.png

Number Mapping

Peoplefone numbermap.png

Route Settings

Peoplefone routes.png