Howto:SIP-Trunk - CM - SIP Provider: Difference between revisions

From innovaphone wiki
Jump to navigation Jump to search
Line 121: Line 121:
|----
|----
|'''Loop In call(Innovaphone -> Provider -> Innovaphone)'''
|'''Loop In call(Innovaphone -> Provider -> Innovaphone)'''
|n/a
|ok
|}
|}



Revision as of 13:11, 16 March 2023

Innovaphone Compatibility Test Report

Summary

SIP Provider: CM

The provider supports all required innovaphone features and is therefore qualified as recommended SIP Provider.


That being said, the provider has achieved X% of all possible test points. For more information on the test rating, please refer to Test Description

  • Features:
    • Direct Dial In
    • DTMF
    • Redundancy


  • Supported Codecs by the provider
    • G711
    • G729
    • G723
    • G722

Current test state

This product is being tested right now. The test is not yet completed.


Testing Enviroment

SIPProviderTestTopology1.PNG

This scenario describes a setup where the PBX and phones are in a private network.

  • the SIP trunk is configured without Media Relay and without exclusive coder. This is the case if all tests were successful

Test Results

For more information on the test procedure, please read the following wiki article: SIP Interop Test Description. Bold lines in the test results indicate a KO-criteria.

Basic Call

Tested feature Result
call using g711a OK
call using g711u OK
call using g723 NOK
call using g729 OK
call using g722 NOK
Overlapped sending OK
early media channel NOK
Fax using T.38 n/a
T.38 Transcoding by the provider n/a
Reverse Media Negotiation n/a
CGPN can be suppressed OK
CLIP no screening OK
Long time call possible(>30 min) OK
External Transfer OK
NAT Detection OK
Redundancy n/a
SIP over TCP NOK
Voice Quality OK? OK
* Note to Redundancy: Each account has a primary and secondary account, so as the primary fails, the secondary can take over. The primary and secondary are on different switch/server.

Direct Dial In

Tested feature Result
Inbound(Provider -> Innovaphone) OK
Outbound(Innovaphone -> Provider) OK
Loop In call(Innovaphone -> Provider -> Innovaphone) ok

DTMF

Tested feature Result
DTMF tones sent correctly via RTP-events(RFC 2833) OK
DTMF tones sent correctly via SIP-Info NOK
DTMF tones received correctly via RTP-events(RFC 2833) OK

Hold/Retrieve

Tested feature Result
Call can be put on hold OK
Held end hears music on hold / announcement from PBX OK

Transfer with consultation

Tested feature Result
Call can be transferred OK
Held end hears music on hold OK

The following tests are made to test if call transfer is working.

Tested feature Voice Ok? MoH Ok?
inno1 calls inno2. inno2 transfers to PSTN-phone. OK OK
inno1 calls PSTN-phone. inno1 transfers to inno2. OK OK
inno1 calls PSTN-phone. PSTN-phone transfers to inno2. OK OK
PSTN-phone calls inno1. inno1 transfers to inno2. OK OK
PSTN-phone calls inno1. PSTN-phone transfers to inno2. OK OK
PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2. OK OK

Transfer with consultation (alerting only)

Tested feature Result
Call can be transferred OK
Held end hears music on hold or dialling tone OK
Call returns to transferring device if the third

Endpoint is not available

OK

The following tests are made to test if call transfer is working.

Tested feature Voice Ok? MoH Ok?
inno1 calls inno2. inno2 transfers to PSTN-phone. OK OK
inno1 calls PSTN-phone. inno1 transfers to inno2. OK OK
inno1 calls PSTN-phone. PSTN-phone transfers to inno2. OK OK
PSTN-phone calls inno1. inno1 transfers to inno2. OK OK
PSTN-phone calls inno1. PSTN-phone transfers to inno2. OK OK
PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2. OK OK

Blind Transfer

Tested feature Result
Call can be transferred OK
Held end hears dialling tone OK

The following tests are made to test if call transfer is working.

Tested feature Voice Ok?
inno1 calls inno2. inno2 transfers to PSTN-phone. OK
inno1 calls PSTN-phone. inno1 transfers to inno2. OK
inno1 calls PSTN-phone. PSTN-phone transfers to inno2. OK
PSTN-phone calls inno1. inno1 transfers to inno2. OK
PSTN-phone calls inno1. PSTN-phone transfers to inno2. OK
PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2. OK

CFU / CFB Transfer

Tested feature Result
Call can be forward OK
Held end hears dialling tone OK

CFNR / Blind Transfer (alerting only)

Tested feature Result
Call can be transferred or forward OK
Held end hears dialling tone OK

The following tests are made to test if call transfer is working.

Tested feature Voice Ok?
inno1 calls inno2. inno2 transfers to PSTN-phone. OK
inno1 calls PSTN-phone. PSTN-phone transfers to inno2. OK
PSTN-phone calls inno1. inno1 transfers to inno2. OK
PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2. OK

Broadcast Group & Waiting Queue

Tested feature Result
Caller can make a call to a Broadcast Group OK
Caller can make a call to a Waiting Queue OK
Announcement if nobody picks up the call OK

Configuration

Firmware version

All innovaphone devices use V13r3 SR2.

SIP - Trunk

SIP-Trunk - CM - SIP Provider Compatibility Test 1.png

Number Mapping

SIP-Trunk - CM - SIP Provider Compatibility Test 2.png

Route Settings

SIP-Trunk - CM - SIP Provider Compatibility Test 3.png