Howto:Vozelia Provider Compatibility Test

From innovaphone wiki
Jump to navigation Jump to search

Innovaphone Compatibility Test Report

Summary

SIP Provider: Vozelia

The provider supports all required innovaphone features and is therefore qualified as recommended SIP Provider.

The provider operates both in France and Spain.

Clip No Screening is not supported. Also T.38 and T.38 Transcoding are not supported, so we can't use Innovaphone FaxServer with this SIP Provider.

That being said, the provider has achieved 87% of all possible test points(138/157). For more information on the test rating, please refer to Test Description

  • Features:
    • Direct Dial In
    • DTMF
  • Supported Codecs by the provider
    • G711
    • G729

Current test state

Recprod.PNG The tests for this product have been completed and it has been approved as a recommended product (Certification document).

Testing of this product has been finalized April 15th, 2014.

Testing Enviroment

HFO SIP Compatibility Test 5.PNG

This scenario describes a setup where the PBX and phones are in a private network.

  • the SIP trunk is configured without Media Relay and without exclusive coder. This is the case if all tests were successful

Test Results

For more information on the test procedure, please read the following wiki article: SIP Interop Test Description. Bold lines in the test results indicate a KO-criteria.

Basic Call

Tested feature Result
call using g711a OK
call using g711u OK
call using g723 NOK
call using g729 OK
call using g722 NOK
Overlapped sending NOK
early media channel OK
Fax using T.38 NOK
T.38 Transcoding by the provider NOK
Reverse Media Negotiation OK
CGPN can be suppressed OK
CLIP no screening NOK
Long time call possible(>30 min) OK
External Transfer OK
NAT Detection OK
Redundancy OK
SIP over TCP NOK
Voice Quality OK? OK

Direct Dial In

Tested feature Result
Inbound(Provider -> Innovaphone) OK
Outbound(Innovaphone -> Provider) OK
Loop In call(Innovaphone -> Provider -> Innovaphone) OK

DTMF

Tested feature Result
DTMF tones sent correctly OK
DTMF tones sent correctly via SIP-Info NOK
DTMF tones received correctly OK

Hold/Retrieve

Tested feature Result
Call can be put on hold OK
Held end hears music on hold / announcement from PBX OK

Transfer with consultation

Tested feature Result
Call can be transferred OK
Held end hears music on hold OK

The following tests are made to test if call transfer is working.

Tested feature Voice Ok? MoH Ok?
inno1 calls inno2. inno2 transfers to PSTN-phone. OK OK
inno1 calls PSTN-phone. inno1 transfers to inno2. OK OK
inno1 calls PSTN-phone. PSTN-phone transfers to inno2. OK OK
PSTN-phone calls inno1. inno1 transfers to inno2. OK OK
PSTN-phone calls inno1. PSTN-phone transfers to inno2. OK OK
PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2. OK OK

Transfer with consultation (alerting only)

Tested feature Result
Call can be transferred OK
Held end hears music on hold or dialling tone OK
Call returns to transferring device if the third

Endpoint is not available

OK

The following tests are made to test if call transfer is working.

Tested feature Voice Ok? MoH Ok?
inno1 calls inno2. inno2 transfers to PSTN-phone. OK OK
inno1 calls PSTN-phone. inno1 transfers to inno2. OK OK
inno1 calls PSTN-phone. PSTN-phone transfers to inno2. OK OK
PSTN-phone calls inno1. inno1 transfers to inno2. OK OK
PSTN-phone calls inno1. PSTN-phone transfers to inno2. OK OK
PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2. OK OK

Blind Transfer

Tested feature Result
Call can be transferred OK
Held end hears dialling tone OK

The following tests are made to test if call transfer is working.

Tested feature Voice Ok?
inno1 calls inno2. inno2 transfers to PSTN-phone. OK
inno1 calls PSTN-phone. inno1 transfers to inno2. OK
inno1 calls PSTN-phone. PSTN-phone transfers to inno2. OK
PSTN-phone calls inno1. inno1 transfers to inno2. OK
PSTN-phone calls inno1. PSTN-phone transfers to inno2. OK
PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2. OK

CFU / CFB Transfer

Tested feature Result
Call can be forward OK
Held end hears dialling tone OK

CFNR / Blind Transfer (alerting only)

Tested feature Result
Call can be transferred or forward OK
Held end hears dialling tone OK

The following tests are made to test if call transfer is working.

Tested feature Voice Ok?
inno1 calls inno2. inno2 transfers to PSTN-phone. OK
inno1 calls PSTN-phone. PSTN-phone transfers to inno2. OK
PSTN-phone calls inno1. inno1 transfers to inno2. OK
PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2. OK

Broadcast Group & Waiting Queue

Tested feature Result
Caller can make a call to a Broadcast Group OK
Caller can make a call to a Waiting Queue OK
Announcement if nobody picks up the call OK

Configuration

Firmware version

All innovaphone devices use V10 Sr8

SIP - Trunk

Vozelia SIP Provider Compatibility Test 1.png

Number Mapping

Vozelia SIP Provider Compatibility Test 2.png

  • All incoming calls come in e164 format.

Route Settings

Vozelia SIP Provider Compatibility Test 3.png

Note: It's necessary to enable Force Enblock in the outgoing route.

Redundancy

  • When registering the same account on 2 different devices (PBX and Standby PBX) the provider will send all incoming calls to the last device that "registered" on the SIP Server. Since both PBX and Standby PBX have Gateway SIP Interface registered incoming calls can be accepted on both devices at anytime (not simultaneous) so it's not a problem if the SIP Provider sends sometimes the call to Standby-PBX and other times to the Main PBX.
  • For outgoing calls the SIP Provider accept calls from both devices/registrations.