IP305 Technical Data
Housing
Size: 210 x 134 x 32 mm
one height unit (HU) for 19” systems
Weight: 680 g
Interfaces
2 x ISDN BRI: TE and NT mode for trunk interface
2 x Fast-Ethernet: 10/100-BASE-TX (auto negotiation), RJ-45 (modular Jack 8P8C)
„Power over Ethernet“ according to IEEE 802.3af, Class 3
Energy Efficient according to IEEE 802.3az
Slot for Compact Flash Cards Type I
Hardware
Power supply: Power over Ethernet according to IEEE 802.3af, Class 3
or external power supply
125 MHz CPU, 32 MB RAM (since HW 307, before 16 MB), 8 MB Flash
Operation temperature: 0 °C to +45 °C
Humidity: 10% to 90% (not condensed)
Storage temperature: -10 °C to +70 °C
Digital Signal Processor (DSP) for codecs up to 4 voice/audio conference channels
4 HDLC channels
1 fax interface channel
innovaphone PBX
Platform for up to 10 PBX Users (all-in-one)
General features valid for innovaphone gateways operated with firmware V12
VoIP protocols
H.323 Version 5, including proprietary extensions
H.323 over UDP, TCP, TLS
SIP Version 2, conform RFC 3261
SIP over UDP, TCP, TLS
RTP, SRTP (SDES, DTLS), RTCP, ICE
T.38 Fax (supported rates 9.6k and 14.4k)
incl. fallback to G.711 (valid for gateways with DSPs)
ISDN protocols
valid for gateways including S0/S2M interfaces
Euro ISDN D-channel protocol (E-DSS1)
QSIG D-channel protocols: ECMA1, ECMA2
US D-channel protocols: USA-National-ISDN-1, USA-5ESS, USA-DMS100
Connection modes: Point-to-Point (PtP), Point-to-Multipoint (PtMP)
S0: up to 2 speech channels per interface
S20 E1/T1: up to 30/23 ISDN-speech channels per interface
Operation mode TE/NT adjustable per interface
Linux Application Platform
applicable for gateway models xx10 and xx11 (except of 1130) or as virtual solution
for additional Unified Communications applications such as faxserver, reporting and Microsoft(R) Exchange calendar connectivity
Requirements for operation in a virtual machine:
- VMWare Player/VMWare Workstation
- 1vCPU (at least 800 MHz - depending on the operation/load of other tasks)
- 512 MB RAM
- 8GB Disk (operation in IPxx10 requires a qualified CF-card, resp. in IPxx11/11xx a SSD)
Network
PPPoE, manual or automatic connection after boot
PPTP Tunneling up to 32 tunnels simultaneously, encoding via MPPE
NAT, H.323-NAT, STUN, TURN over UDP/TCP
RSTP, EAP-TLS/EAP-MD5 acc. to IEEE 802.1X
VLAN-ID acc. to IEEE 802.1Q
DHCP support
LLDP support for VLAN configuration
NTP support
Reverse Proxy, various SBC-functionalities (IPxx11/11xx recommended)
Administration
Password protected administration via web-browser, Kerberos server
Log and trace files, Display of interface and connection status, Ping – connection test for Internet Protocol, Sending SNMP V1 Traps
Save and reload config files, Boot code and firmware update via HTML upload, Automatic update via update server
Conformities
Applies to IP22, IP24, IP28, IP302, IP305:
- EN 55022/AC:2011-10
- EN 55024:2010-11
- EN 60950-1:2006-04 + A1:2010-03 + A11:2009-03 + A12:2011-02
Applies to IP800, IP810, IP0010, IP1060, IP3010:
- EN 55022/AC:2011-10
- EN 55024:2010-11
- EN 60950-1:2006-04 + A1:2010-03 + A11:2009-03 + A12:2011-02
- EN 60950-1:2001 (IP800 only)
- EN 61000-3-2:2000 (IP800 only)
- EN 61000-3-3:1995 + A1:2001 (IP800 only)
innovaphone WEEE-Number
DE 31703754
Order number
01-00305-001 This product is end of life.
innovaphone® AG | Umberto-Nobile-Str. 15 | 71063 Sindelfingen | Germany | T +49 7031 73009-0 | F +49 7031 73009-9 | info@innovaphone.com | www.innovaphone.com
Errors, delivery times and technical specifications may be subject to change. Copyright © 1997-2024 innovaphone® AG