Jump to navigation Jump to search
See Reference12r1:Concept_Reverse_Proxy for General information
- H.323/TCP, H.323/TLS
- Ports for incoming H.323 TCP or TLS Connections. Use 1720 and 1300 for the standard ports.
- SIP/TCP, SIP/TLS
- Ports for incoming SIP TCP or TLS Connections. Use 5060 and 5061 for the standard ports.
- LDAP, LDAPs
- Ports for incoming LDAP TCP or TLS Connections. Use 389 and 636 for the Standard ports.
- HTTP, HTTPS
- Ports for incoming HTTP TCP or TLS Connections. Use 80 and 443 for the Standard ports.
- Log Forwarded Requests
- activate protocol dependent logging for successfully forwarded / accepted requests
- Log Rejected Requests
- activate protocol dependent logging for rejected / non-accepted requests
- Blacklist Expiration
- Time in minutes after which an entry put in the blacklist automatically, will be removed from the blacklist.
- Suspicious Requests/min
- Threshold to put an address into the blacklist
List of configured hosts. Click on the host Name to edit or delete. Use new to add new host
- Destination IP for this rule following by the plain text port
- Port for encrypted traffic
- Check Certificate
- If the Check Certificate checkmark is set, for the internal connection TLS is used only if the received certificate matches the user name within the protocol. This way a host receiving a request through the Reverse Proxy using TLS can assume that the connection was authenticated using a valid certificate, which matches the user.
- adddr:network to restrict a configured protocol to certain networks
Current top ten address with suspicious requests