Reference14r2:Release Notes Firmware

This is the Firmware 14r2 Release Notes Document.

Service Releases are planned for the second Monday each month. For each of the service release, the complete set of tests is executed. If problems show up during the tests, the problems are fixed. This may cause a delay. The tests are started early, so that some delay is covered, but it still may happen that the patchday has to be moved. In this case it is hard to predict when the service release is good. It may be any day, so it would not be good to move the patchday by a fixed number of days, it still should be released as early as possible.

Please see:

• the disclaimer before using the information presented here!
• Howto:Firmware Upgrade

• Howto14r2:Firmware_Upgrade_V14r1_V14r2

Firmware 14r2

Main improvements in 14r2

166284 - App Working Admin: Groups

• Groups can be defined where specific rights can be set for some users (for example allow some users to work on sundays or remove some warnings).
• Managers can be assigned to these groups, so they can see only the users in the group when opening the Working Admin App.
• There is also the HR mode which allows to see all the users on the Working Admin App.
• The user's groups are displayed on the user's details.

166286 - App Working Admin: UI improvements

• Email button to send an email to the user  (if there are errors a predefined text is added to the email).
• There are 3 sections now to filter the users : all users, times missing and to check.
• Errors on working hours can be marked as ok and they are not displayed as errors anymore.
• It is possible to filter users by group name, so for example when searching by "Sales" all the members of sales will be displayed on the "all users" tab.
• ​The user and the date of the last config changes on the hamburger menu are displayed as a tooltip.

​

​

166285 - App Working: Workings hours types

• Working types (configured on the Admin App) can be selected on a Dropdown menu on the  Working App before submitting the working hours.
• The amounts of vacation and sick leave hours are displayed on the month summary and also the working hours per type (if they are not 0).
• Working hours types can also be defined by group, so the users inside the group will have the general working types and also the ones defined on the group.

​

​

166962 - Translations App

The Translations app provides a translation interface between apps (any app can integrate this service) and deepl.com

For details, see: Reference14r2:Concept_App_Service_Translations

Other improvements in 14r2

161007 - #160633 - Fix crash when a to old recordings request is removed from the queue (list)

When recordings asks for the call meta data and recordings doesn't find these datas the reordings app tries for 8 hours before deleting the request. This caused a crash and is now fixed

161622 - App Users: Allow to hide the SIP as it is done with email and phone

Enabled/disable e.g. via Usersadmin (as it is done with the phone numbers and email adresses) the display of the SIP-URI on Users App.

160985 - App Working: Only send SqlUpdate to the sessions with the same sip

On the Working App the SqlUpdate should only be sent to the sessions with the same sip and not broadcasted to all users.

165911 - Conference: Show video connections as encrypted

 Show video connections as encrypted in gateway's  calls view.

164753 - Contact Widgets: Show tooltip info on green checkmark on PBX manager plugin

Show tooltip info with umber of widgets and number of current client sessions.

165225 - Firmware Reverse Proxy: blacklist incoming connections with SSL errors/untrusted certificates or if mtls fails

Such incoming connections are now blacklisted even if there is a valid host entry.

161878 - Firmware Voicemail: Trap while reading script

A trap occurred while reading in a script from a webserver not supporting partial read requests.

160633 - Fix crash when old recordings requests are removed

Recordings make request to the reporting app in order to find the meta data for a recorded call. These requests are stored in a list and processed one after another. In very rare cases, when a request was not processed for over 8 hours that request is removed from the list. This caused a crash and is fixed now. 

167007 - Generate backtraces without GDB

GDB doesn't interprete coredumps correctly anymore an ARM 32bit.

​So signals like SIGSEGV are now intercepted and the App itself generates a backtrace with the lib backtrace.

159181 - increase system time accuracy

the device system time was updated to the current NTP time on a difference of  3 seconds and it may be hard hard to find matching information in logs of different deviceses.

Now the system time is updated on a difference of 1 second already.

162249 - IPxx11: modify linux kernel upload for 6.x.x kernels

the compressed linux kernel is now loaded to a higher address in linux RAM area. This speeds up  kernel start a little bit because the kernel must not shift itself to a higher address before uncompress .

 

167161 - IPxx11: Trap when starting LinuxApplication Platform V10

The Linux V4 kernels did not start and this resulted in a trap. This is fixed now.

165420 - IPxx13: include SEC driver

Include the SEC (Security and Encryption Engine) driver in firmware for development of SEC based encryption functions.

​Currently the driver is only started when /enable is added to SEC config line​

159396 - IPxx13: permit RAID installation only on disks with identical no of sectors

A RAID can be installed only on disks of nearly same size  but to be sure only disks with an identical number of sectors are accpted.  

165856 - myApps Windows: close myApps on uninstall and earlier during installation

If myApps is uninstalled, it's automatically closed now and during a standard installation, the closing is performed during an earlier sequence step.

162046 - myApps: Bring main window to front when myApps links are opened

When clicking a notification or opening a com.innovaphone.myapps: link, the window is now brought to the front.

166316 - NTP: OEM specific default NTP server

​The default NTP server is used when no server is configured or provided by DHCP. Vendors may replace "ntp.innovaphone.org" by another address in build process.

165494 - PBX Manager / Reverse Proxy: Remove obsolete paths

The following paths are obsolete, so the RP plugin no longer creates entries for them.

​PBX0/MY

​PBX0/DEVICES

​PBX0/WEBSOCKET

165159 - PBX: Fix for DND and wake mechanism

The DND presence only prevented waking up the softphone app if the contact was "tel:". ​But it should work for any contact.

166263 - Phone-App: Fix for changing video camera during call

When video camera was changed during call, the video camera was not stopped on end of call.

​This causes problems when closing myApps which in turn keeps myApps from being started next time.

​User must re-configure myApps at next start.

166112 - Phone-App: No presence ribbon if presence could not be retrieved

Do not show presence ribbon if presence subscription could not be established.

159258 - Phones: Allow to configure energy-saving time

Allow to configure

time for energy-saving (turn off display).

New config option on screen "Device settings".

162248 - Phones: Automatically enter/leave Energy Saving Mode

Automatically enter/leave Energy Saving Mode.

​Not only when phone enters idle state.

167018 - RCC 32bit handles instead of 16bit

Under some special conditions we could run out of handles and this can cause a restart

165345 - Rcc-App: Allow to unpark a call

Allow to unpark a call in Rcc-App.

165979 - Softphone-App: Accent color missing in docked-out window

Accent color missing in docked-out media-panel (Phone-App and Softphone-App).

164406 - Softphone-App: Avoid JS exception when websocket connection gets lost during call

Avoid JS exception when websocket connection is lost during call

165229 - Softphone-App: Fix for display of calendar presence

Calendar presence may contain control codes that help to translate information into user's language.

These control codes must not be displayed.

158823 - Use 64 bit time and filesystem functions in App Platform SDK

Set _TIME_BITS 64 and _FILE_OFFSET_BITS  64 in platform.h that 64bit timestamps and file system stats are used.

161427 - Web-Access: UI fine-tuning

Small UI improvements on Web-Access client