The innovaphone OS and the App Platform coexist on the device. The App Platform uses the second CPU core and reserved memory. With enabled Linux support the necessary memory is reserved during the device reboot.
The Linux OS is in a non-local network. To access it with devices that have no proper routing configuration for it, Proxy ARP in the source network interface on this device must be enabled.
|Linux kernel file:
|The Linux kernel file name on the CF card. For the App Platform it must be set to:
|Linux initrd file:
|The Linux initrd file name on the CF card if used. Not used for the App Platform.
|Kernel command line:
|The kernel command line which is set at start-up. After a successful installation the value is root=/dev/sda3.
|The size of the RAM disk in kBytes if used. Just used automatically during the installation.
|If ticked, Linux is started automatically if the device reboots and Linux is not running.
For starting Linux a kernel binary must be uploaded or be provided via the flash disk. Via the kernel command line the kernel is informed where the root file system is found. It can be uploaded as temporary RAM disk (initrd) or be available on the flash disk as whole partition.
The shutdown link is available if the App Platform is running correctly and should be always used for a gracefull shutdown.
Stops the CPU of linux. If used, file system errors may occur afterwards!
The former Linux application platform can be still installed. See here: Concept Linux Application Platform