Reference13r2:Interfaces/ETH/LLDP
Jump to navigation
Jump to search
There are also other versions of this article available:
Reference13r2 (this version) | Reference13r3
Specific LLDP settings, needed only in case of problems with some PoE+ switches or to supress VLAN configuration via LLDP:
| Disable | Disable LLDP configuration of VLAN and PoE for this interface and don't send LLDP frames to switch. |
| Ignore | Disable LLDP configuration of VLAN and PoE for this interface but send Inventory information to switch. |
| Disable TIA VLAN | Disable VLAN configuration via TIA 1057 TLVs |
| Disable TIA PoE | Disable PoE negotiation via TIA 1057 TLVs. |
| Disable IEEE PoE | Disable PoE negotiation via IEEE-802.3 TLVs. |
| Prefer PoE+ from interface | Skip any PoE negotiation via LLDP when PoE+ is detected by ethernet interface. |
| Trace | Trace received and sent LLDP frames as raw ethernet frames for inspection with wireshark. |
| PoE | Current status of PoE negotiation. |
| VLAN | Current status of VLAN negotiation. |