Reference13r2:Maintenance/Diagnostics/Counters

From innovaphone wiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
There are also other versions of this article available: Reference9 | Reference13r2 (this version)

Performance counters are shown once per minute (that is: one pixel in the graph represents a minute). However they are saved to flash only each full hour, so counter values calculated prior to a trap may be missing.
The counter's mean value is calculated every 10 seconds. The peak of such mean values within a minute is shown in the graph.
The counters are device-dependent and not present on each device type.
Values are displayed in the counter-specific unit. Mouse-over displays value and unit.

  • CPU-R: reserved CPU time for RTP data
  • CPU Average: average value of the CPU load in a one-minute cycle
  • CPU Peak: maximum value which has been exceeded for 10 seconds within a one-minute cycle
  • MEM: the total volatile memory (RAM) usage
  • TEMP: device temperature (gateways only)
  • BRIx/PRIx: the number of B-channels used on the respective ISDN interfaces. (devices with BRI/PRI interfaces only)
  • ETHx: ethernet traffic on respective interface
  • PINGx: response time for PING request
  • CONF/SCNF: concurrent calls on respective interface (devices with CONF/SNCF interfaces only)
  • CONF-R/SCNF-R: reserved CPU time for RTP data on this kind of interface (devices with CONF/SCNF interface only)
  • Concurrent Calls (DECT only)

Related Articles

Reference:Device_Health_Check#The_Performance_Counters