Reference8:Administration/DECT/Master-Calls

From innovaphone-wiki

Jump to: navigation, search
There are other versions of this article: Reference | Reference8 (this version) | Reference9

Statistic

Some statistical informations about calls, handovers and the maximum number of calls at the same time.

Call list

The currently active calls carried out via the DECT master can be monitored. Here, it is to be noted that internal calls between innovaphone PBX subscribers are not displayed if the optional innovaphone PBX component is installed.

Number The DECT party number.
Name The DECT party name.
Radio IP1200-xx-xx-xx The DECT system used.
Local xxx.xxx.xxx.xxx:xxxx The IP address and port of the DECT system used.
Dir >>
<<
The call direction: Outgoing.
The call direction: Incoming.
Number The remote party number.
Name The remote party name.
Remote xxx.xxx.xxx.xxx:xxxx The IP address and port of the VoIP device on which the innovaphone PBX component is enabled.
Uptime The uptime of the call: the alerting or the connected time.
State Calling
Alerting
Connected
Incomplete
Disconnecting
Call is being set up.
Call is being signalled.
Call connected.
Call incomplete.
Call is being disconnected.
Personal tools