Reference8:Administration/PBX/Objects/Mobility

From innovaphone-wiki

Jump to: navigation, search
There are other versions of this article: Reference8 (this version) | Reference9

The Mobility Object provides mobile extension services for users. These services are call waiting, hold retrieve, transfer and delayed call to a mobile extension. For a user, at least one forking to a mobile number must be configured (using the Fork column in the PBX Objects tab) and within the forking configuration a Mobility object must be selected.

Configuration

Tone Interface An PBX object to which a dial tone provider is registered. This can be used to off-load the media streaming for dial tones from the PBX. If left empty the local HTTP interface is used for dial tones
R-Key DTMF sequence which is interpreted as R-Key (hook-flash). Default is '**'.

R-Key Functions

With the R-Key sequence the services of handling multiple calls can be invoked. In the following table R-<digit> means the DTMF sequence for the R-Key followed by the DTMF for <digit>. For example if an R-Key sequence of '**' is configured R-0 means a DTMF sequence of '**0'.

R Put active call on hold and get new dial tone. If there are other held or waiting calls, there will be a delay of 3s until this is executed.
R-0 Reject a waiting call
R-1 Disconnect the active call and retrieve a held call.
R-2 Put the active call on hold and retrieve the held call.
R-3 No functionality, reserved for 3pty conference.
R-4 Transfer held call to the active call. Just hanging up the call on the mobile device, when an active and a held call is present, does the same thing.
R-# Put active call on hold and get new dial tone in case there are already held or waiting calls. Same as 'R' and wait for timeout.
Personal tools