Reference9:Interfaces/BRI/Protocol

From innovaphone wiki
Revision as of 16:43, 26 January 2011 by Afi (talk | contribs) (New page: The signaling '''protocol''' for the ISDN interface is configured here. == Euro ISDN D-channel protocol: == {| |valign=top nowrap=true|'''EDSS1:''' | This type of signalling has gained wo...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
There are also other versions of this article available: Reference | Reference9 (this version)

The signaling protocol for the ISDN interface is configured here.

Euro ISDN D-channel protocol:

EDSS1: This type of signalling has gained worldwide acceptance for ISDN subscribers and, despite the name, is also common outside Europe.


QSIG D-channel protocol:

This is a standardised signalling method mainly used to interconnect traditional PBXs.

Unfortunately, there are several variants of the QSIG standard and various implementations; some conform more and some less to the standard.

The gateways therefore support two different variants:

QSIG ECMA1: Using B-channel numbering (1-30)
QSIG ECMA2: Using timeslot numbering (1-15, 17-31)

On T1 interfaces, both variations are identical, as the B-channels 1-23 correspond to timeslots 1-23.

Please note that there are more settings relevant to QSIG on the interfaces Interop page.

US D-channel protocol:

NI: USA (National ISDN 1)
5ESS: USA (AT&T)
DMS100: USA (new standard)

Mode:

Point-to-Point: Switches on the point-to-point connection.
Point-to-Multipoint: Switches on the point-to-multipoint connection.