Reference9:PBX/Objects/Number Map

From innovaphone-wiki

Jump to: navigation, search
There are other versions of this article: Reference | Reference8 | Reference9 (this version) | Reference10 | Reference13r2

This object maps the dialed number to a new one optionally depending on the registration address of the calling endpoint. Matching of the registration address only works if the calling endpoint is registered on the PBX on which this object is defined (the PBX property of the Number Map object).

It may be used for abbreviated number dialing, or if used with registration address match to dial certain destinations depending on the physical location of the phone (e.g. to make shure the local emergency number is called).

Address/Mask Define the IP network for which this destination address shall be used. If left blank no check on the registration address is performed.
Dest. No The number to be dialed

From Version 8 on, a MAP object can be member of the VIP group defined for an executive object . If the Dest. No is an executive object then, this object will accept calls through this Number MAP object as direct call to the executive.

Personal tools