ReleaseNotes13r3:Firmware

This is the Firmware 13r3 Release Notes Document.

Service Releases are planned for the second Monday each month. For each of the service release, the complete set of tests is executed. If problems show up during the tests, the problems are fixed. This may cause a delay. The tests are started early, so that some delay is covered, but it still may happen that the patchday has to be moved. In this case it is hard to predict when the service release is good. It may be any day, so it would not be good to move the patchday by a fixed number of days, it still should be released as early as possible.

Please see:

• the disclaimer before using the information presented here!
• Howto:Firmware Upgrade

• Howto13r3:Firmware_Upgrade_V13r2_V13r3

Firmware 13r3

13r3 Service Release 1 (137766)

137126 - App Switchboard: Peer data not updated for queued calls

When a call was added to "In the waiting queue" section, the peer information (name and number) was not updated when a "CallInfo" with msg "update" message arrives.

136809 - App Users/Search API: Instance restarted if there is an user named "root"

The query to get the extension with the node prefix returned an error if there is an user named "root" on the DB, which called a DB Shutdown and the instance restart.

136832 - innovaphone myApps Connector for Microsoft 365: User Notification from Microsoft leads to non-functioning presence subscription

If a user notification is received from Microsoft then the presence subscription is not functional because of non-working license check.

136936 - IPxx10: LLDP power request too low

Since 13r2 sr18 the power requested  for  IPxx10 boxes via LLDP was too low (6.4 W instead of 13 W)

It was observed that an Aruba switch switched off/on  power after about 10 minutes.

136760 - myApps: Fix for crash on overlap dialing

myApps crashed on overlap dialing.

137011 - myApps: Prevent playback controls on iOS lock screen

After the initial user login myApps plays a startup sound.

For this sound the iOS lock screen showed playback controls that did not disappear after the playback was finished.

136837 - OAuth2: do not enforce nonce claim support report by openid configuration

The nonce claim support is now just checked and if not reported just shown as warning instead of an error.

The server still must echo the client nonce inside the id token, otherwise the authentication will fail.

137017 - PBX: Unexpected restart because of null pointer access

Could happen on registrations with no matching user

137198 - Phone-App: Fix for failed consultation call

User was not able to release a failed consultation call.

Failed (disconnected) consultation call disappeared from MediaPanel.

136558 - Phones/PBX: Reduce high load on PBX caused by config changes

Config changes trigger phones to re-new all their subscriptions even if no changes where made to user's favorites.

Load on PBX can go to extreme if changes are made to config template. Lots of phones get new config at the same time. Keep all these phones from terminating and restarting all their subscriptions.

137034 - SIP: Fix for dialog-info subscriptions

Dialog-infos were sent with wrong state.

E.g. "early" instead of "terminated".

Causing calls to be displayed on BLF after call was gone.

137110 - SIP: Fix for reverse media negotiation

Send INVITE without SDP.

Recv 200/OK with SDP offer.

Send ACK with SDP answer.

Must NOT send ACK without SDP.

137106 - SIP: New interop tweak /x-cisco-srtp-fallback

If set, the Supported header (INVITE and 200/OK) includes "X-cisco-srtp-fallback".

136816 - Softphone-App: Camera blocked after 3pty conference

Local video camera stays blocked after 3pty conference was ended.

136770 - Softphone-App: Cannot send DTMF during early-media

Cannot send DTMF while call is in early-media state.

136766 - Softphone-App: Fix for early-media

Softphone-App in browser-context failed to negotiate media before connect. But only when calling waiting-queue.

136814 - Softphone-App: Mute-by-Admin notification not deleted at end of conference

Mute-by-Admin notification not deleted at end of conference.

Also chat-badge-count was not deleted at end of conference.

Displayed at following calls.

137130 - Softphone-App: Sometimes call diversions are not executed

Sometimes call diversions are not executed when calling from Softphone-App (myApps native client).

137123 - Update of *.innovaphone.com certificate in trust list of devices

The old *.innovaphone.com certificate expires on 10.02.2023.

This software update installs the new *.innovaphone.com certificate to the trust list of all devices.

136501 - Users Service: Rework password reset workflow

To improve the security, the workflow of the password reset has been changed. Now a random ID is generated when requesting a password reset, which is sent with the email. After clicking on the email link and only then the new password is added. Like this no fake link can be generated.

137122 - Web-Access: Allow to join without microphone

Allow to join conference without microphone.

136964 - WebAccess: Fix for wrong console warning

E.g. "SRFLX candidates missing" or "RELAY candidates missing"

13r3 Service Release 2 (137786)

137914 - Allow call reroute by Waiting Operator

Was only possible if Enable Operator CFB/CFNR was set

137708 - App Contacts: "Display Name" Wasn't Editable

A contact's displayname name wasn't editable and wasn't rendered correctly.

137706 - App Switchboard: Call not interactable once a second call is disconnected by peer

With 2 calls once the second has been disconnected by the peer, the first call is no longer interactable. The second call was still displayed on the phone and the first was permanently on hold. An UserClear message must be sent after r-disc arrives.

137325 - App Switchboard: Callback request email during an incoming or outgoing call.

When there is an active call, it should use the available information and add the name and number from the caller/called party as information for the callback request and the email address of the employee.

138098 - Certificate validation: possible trap with broken vars in config

If the vars contained broken certificates, the box could trap during certificate validation.

Note: This trap can only happen, if the admin adds broken certificates to the vars using a ! vars create command. When using the advanced UI certificates are always checked before they are installed.

138728 - Conference-Web-Access: Show helpful info text if meeting room is full

Show helpful info text if meeting room is full/occupied.

137363 - Counters: Fix for PING statistic

No pixels drawn is response time is 4ms or below.

137929 - Firmware: added option "TLS/SSL certificate checking" for Devices websocket registrations

The certificate must be in the trust list and the hostname must match to the received certificate.

If this option is used, the App Platform certificate where the Devices App is running must be added to the trust list in order to get a working connection to the Devices App.

The trust list must be also kept uptodate if the webserver certificate of the App Platform is updated.

137733 - Fixed incoming call/missed call notifications on Windows Server 2016

A workaround was introduced 2019 with Fix 66897 to have working notifications on Windows Server 2016.

This workaround is now counterproductive and has been removed so that a call/missed call notification doesn't prevent new notifications from being shown anymore.

137935 - Gateway: stun/turn config on Internal Registrations did not work with some characters

e.g. ':' if used to add a port

138097 - HTTP-Client: Support 401 response with Connection:close and Content-length

401 HTTP responses with Connection: close and Content-length did not work.

137943 - IP-DECT: New registration on every LDAP update

Every update by LDAP causes a new registration for the user even it is not necessary. During a call it is disconnected. This is fixed now.

138649 - IP-DECT: UI Error with App Devices

Button "activate mirror" does not work. This is fixed now.

137219 - IP232: Non-working backspace symbol in multi-line-editor

Backspace symbol displayed but not usable.

137018 - IPVA NIC: Hyper-V, VLance Improvements

Hyper-V:

Fixed problem with frames received out-of-sequence

Increased Vmbus buffer space

Increased numbers of rx-, tx slots

VLance:

Increased numbers of rx-, tx slots

Both:

Enabled caching of previously uncached memory spaces

Increased queue lengths on abstraction for software switching level

138497 - Memory leak receiving ISDN CEI facilities

Problem with very high uptimes

137774 - OAuth2: added configuration options to support Microsoft Azure AD

The upn property must be mapped to email and a scope must be set (to openid).

138498 - PBX Broadcast: UC Lic could not be configured anymore

Needed for some special configurations

137926 - PBX crash on XML Import with some configs

If the config contained lots of small items, a 30K chunk could exceed the maximum number of XML elements

138741 - PBX: Fix for call monitoring (dialog-info)

Keep additional video-only connections from call monitoring (dialog-info).

138074 - PBX: Hanging calls on some rare Timing during connection establishment

Esspecially when media is switched multiple times. For example on a waiting queue, when first an announcement is played and then the operator connects

138494 - PbxSignal Api: New Check command

To verify the connection

138510 - Phone-App: Added tooltip to buttons in status-bar

Status-bar: Added tooltip to buttons and use sematic tag <button> for buttons (instead of <div>) for better accessibility.

137224 - Phone-App: Fix for problem on Mac OS

JS exception because older MacOS does not support ResizeObserver.

137317 - Phone-App: Fixing end of local 3pty conference

Sometimes the two remote parties remain in conference mode after conferenceing endpoint went inhook.

137347 - Phone-App: Sometimes call can not be terminated

No effect when clicking hangup button.

138493 - Potential buffer overrun in SOAP FindUser

In case of long numbers or prefixes. Maybe caused by loops in Node Tree

137922 - Potential restart when using PBX Exec object

Together with multiple secretaries on 64bit platforms

137417 - RCC-App: Calls missing in call list

Calls cancelled by RCC-App do not appear in callees call-list.

Missing call entry is missing on called side.

137740 - recordings: user gui search fileld not working correctly

not all matching entries listed

137741 - recordings: wildcard in gui searchfield

wildcard funtionality in searchfield

137742 - recordings:reporting entities appear multiple times

in pbxmanager plugin the reporting entieties selection shows the same entry multiple times

71402 - Remove "Master" config from DECT object

Not used in 13r1

137543 - SIP-Provider Profile DE-CITEC_AG-Universe_SIP_Trunk

Update SIP Profile - added tweak /always-send-100-trying

137539 - SIP-Provider Profile NL-oneCentral-SIP_Trunk_TCP

Updated SIP Provider Profile

137326 - SIP: Fix for certificate validation problem

If there are several DNS host name records for the same SRV name, only the first host name will be checked during validation.

137273 - SIP: Fix for leak-check

tree_leak_check() was missing

137271 - SIP: Fix for unexpected restart

Unexpected restart when receiving 481 for BYE.

138480 - SIP: OPTIONS from alternative proxy not answered

OPTIONS request from an alternative proxy was not answered.

137902 - SIP: Sometimes no delay when trying alternative proxies that fail

Do delay when switching between (not working) proxies.

137536 - Softphone-App: Added support for physical location

Added support for physical location to Softphone-App running web browser context.

137343 - Softphone-App: Fix for camera selection during conference calls

On slow android devices the camera enumeration takes long, causing _any_ camera to be started (not necessarily the selected one).

138536 - Softphone-App: Fix for diversion display

Active diversion was not displayed sometimes.

Softphone-App and Phone-App.

137345 - Softphone-App: Fix for video format in browser-context

Sometime aspect ratio of camera video is not the desired 16:9. Using additional constraint 'aspectRatio' helps to get 16:9 video from camera.

138117 - Softphone2: crash if a control call arrives during release of a voice call

Signaling message from control call is wrongly considered part of the voice call leading to a crash.

137407 - Softphone: no avatar image for missed call notifications

Avatar image was not provided to the notifications API

137944 - Users Service: Missing translations on reset password

Some translations where missing on the reset password page. 

13r3 Service Release 3 (137803)

138986 - Active diversions not displayed in Softphone-App

Conditional diversions (CFB and CFNR) not displayed in Softphone-App after restart of Softphone-App.

138714 - Added Maintenance/Port Check

To check if TCP can be established to a given addr:port

139670 - Addtional protection against theoretical XSS possibility in pbx_appclient_popup.htm

• The page does not work anymore, if loaded without a window.opener.
• The page does not work anymore, if loaded in a standard browser, just in the myApps launcher.
• The URL-Parameter does not allow data-URLs anymore.

140248 - AP Manager: UI fixes

• Long app version is not truncated
  
• Opening the apps popup with the selected language
  

138819 - App Contacts: Huge Import Got Stuck

Importing a 200k users CSV got stuck in the very last step. A bulk delete statement started to behave as a never-come-back SQL statement.

139653 - App Platform Manager: clarified text of disk space threshold

"disk space" was missing and now added to threshold.

139865 - App Platform Manager: do not copy webserver traces to crashdump files anymore

In most cases this is not usefull and causes harder to read log files.

140386 - App Profile: * was unintentionally removed from CFx

When using the search to set the call diversions if an extension contained a * then it was removed when selecting it.

139820 - App Switchboard: If a contact was deleted from Contacts App then it could not be removed from the BLF

If a contact was deleted from the Contacts App, it is still displayed as empty on the BLF and it could only be removed with the Switchboard Admin.

139817 - App Switchboard: Mobile number was ignored for contacts on BLF

If the contact only had a mobile number defined, than the contact could not be called on the BLF.

138485 - App Switchboard: The sorting of favorites does not match the one in the phone app

The sorting was not right with accent marks.

140385 - App Switchboard: Time was wrong if call started before opening the app

The time parameter was ignored when an CallInfo "update" message arrives.

139808 - App Switchboard: Transfer cannot be cancelled

Once the transfer button has been clicked it waits for a click on an user or another call to do the transfer. If you want to click on the transfer button again to cancel the transfer it does not work.

139867 - App Users: App reloaded every few seconds on some installations

Everytime UpdateAppsInfo is triggered, then a SetArgs message arrives and this triggers a reload of the app.

140430 - App UsersAdmin: Segmentation fault when importing twice the same XML file with devices

When importing users using an XML file where the users contain devices a segmentation fault happen when registering the phone because the device already existed on the DB and no id was returned with the InsertSQL.

140398 - Avoid wrong authentication popups with "Password protect all pages"

If config option "Password protect all HTTP pages" was checked, erroneously the following pages showed an HTTP authentication popup in browsers:

• Conference WebAccess
• Conference App
• Conference Search App
• LDAP API App
• Email-Links for myApps 2FA
• HTTP redirect to default page (typically install.htm or myApps)

140096 - Command/Kerberos: Protect against multiple intersecting login requests

This fix protects the command module and kerberos client against certain traps, that could happen if the application erroneously sends more than one login at a time.

139082 - Fixed typo in webserver

Fixed typing errors in webserver.

139574 - innovaphone myApps Connector for Microsoft 365: Avoid hanging calls due to late notification of Teams Client

It can happen that the call of the pbx is too short and the Teams Client send its notification too late so that the Teams Notification triggers an alien call.

140390 - IP-DECT: OEM license check changed

There is a change for an OEM license check which does not change other usage szenarios.

140394 - IP-DECT: User license check with UI

If an user is added with the UI, the user license is checked before the LDAP save operation now. Otherwise the user data is saved, but the user is not added to the DECT system.

138483 - IP2x2: External Signal Alert for alert state

External Ring Alert state was wrong, now this is implemented:

On Pin 9 a low level is signaled if the phone Alerts, otherwise the signal is high.

On Pin 5 a low level is signaled if the handset is offhook or if handsfree mode is active. Otherwise the signal is high

138291 - IPxx13 - add power consumption counter

the power consumption of the ipxx13 is rather high, specially when the SSDs are heavily used, but should not reach the PoE+ limit of 25W . An alarm should be raised when this limit is rached .

125712 - IPxx13 - handle missing interrupts

try to restart interrupt controller when  idle loop runs longer than 1/2 second without being interrupted 

139652 - Make warning "Excessive loss of Data" less intrusive

Keep it at upper end of media-panel (not central).

Make it disappear automatically after 2,5 secs.

139802 - myApps for Windows: GPU chromium crashes and myApps does not start

Update Wiki Article!

139829 - myApps redundancy: physical location was remembered even if configuration was removed

If the user configured an explicit physical location as a parameter at the Server Name, that config was remembered, even if the parameter at the Server Name was removed.

139801 - myApps redundancy: support for license master

Slave PBXes with the license-only flag returned their license master as the alternative PBX, which is incorrect, as they should act as a master PBX themselves.

139812 - myApps: Allow Web Share API in app iframes

We added "web-share" to the allow attribute of app iframes.

139931 - myApps: App link from URL was lost on redirect

myApps accepts an app link as URL parameter. The specified app is opened after authentication.

Before the fix, this app link was lost after redirects (to a different PBX or build number). But it should be passed to the new URL.

140886 - myApps: badges set from running app were not displayed in start bar

The start bar of myApps did not show the badge counts set by the app, but only badge counts set by the app service via presence. (13r3 only)

138823 - Option to create debug builds

Nature of build shown in release state

140414 - PBX Exec was called directly even if secretary was available

Collateral damage from 

137922 - Potential restart when using PBX Exec object

139674 - PBX Fax: T.38 renegotiation for outgoing calls

The FAX interface does try to renegotiate to T.38 for outgoing calls. Normally, the called gateway has to renegotiate, but if it does not, the innovaphone FAX interface does this after a timeout.

Now, the PBX Fax object sends an UUI message, because the signaling connect message is not forwarded to the interface for outgoing calls by the PBX.

This helps if the remote fax gateway decides to use an audio coder for the transmission and an innovaphone FAX interface only with T.38 is used.

139668 - PbxAdminApi: fixed objects of the regs array in GetRegsResult

The output of the GetRegs was not formatted as stated in the PbxAdminApi documentation. The regs array contained mixed elements (objects and strings).

138977 - phone USB Headsets: add additional product-ID 0x030c for Jabra Evolve 65 (wired) product

Newer Evolve65 Headsets come with product-ID 0x030c instead of  0x030b.

137434 - Phone-App: Own screensharing was displayed mirrored (locally only)

The local display of shared content was displayed mirrored.

138533 - Phones: Fix for display of presence note

If a user sets a presence note containing # (hash-mark) it is stored in escaped form (double hash-mark).

When presence note is displayed a single hash-mark must be displayed.

139100 - Phones: Fix for display of STUN/TURN config on phone UI

Sometimes "/turn" was displayed as STUN server when no STUN server was configured at all.

139689 - Potential endless loop in SNMP on IPxx11 platform

Problem with AES-CFB encryption/decryption on IPxx11 platform.

140838 - SIP-Provider Profile BE-X2com-X2voip

New SIP Provider Profile

139920 - SIP-Provider Profile CH-4Ts_Computers-SIP_Trunk

New SIP Provider Profile

140839 - SIP-Provider Profile DE-Swissnet-SIP_Trunk

New SIP Provider Profile

140841 - SIP-Provider Profile FR-Linkt-TRUNK_SIP

New SIP Provider Profile

139417 - SIP-Provider Profile NL-oneCentral-SIP_Trunk_TLS

New SIP Provider Profile

139783 - SIP-Provider Profile NL-SonaBusiness_BV-SIP_Trunking

New SIP Provider Profile

139919 - SIP: Avoid registration at backup server when registration is canceled

Sometimes a registration at backup server was started when registration was about being cancelled.

137923 - SIP: Fix for interfaces not registering

Sometimes SIP interfaces do not register at carrier, becase sometimes IP6 address is picked from DNS results, but no local IP6 address is available.

Better switch to alternative IP address.

139831 - SIP: Fix for unexpected restart

Assertion failed when provisional response was reveived.

139291 - SIP: High memory and cpu load when switching to alternative server

High memory and cpu load when switching from one server to another.

137728 - SIP: Interface did not switch to alternative IP address

SIPi nterface did not switch to alternative IP address.

But only in case no SRV record was available.

E.g. one IP4 address by A query and one IP6 address by AAAA query.

139279 - SIP: Memleak when checking certificate name

Small memory leak when checking certificate name.

137807 - SIP: Send P-Asserted-Identity header in UPDATE

Send P-Asserted-Identity header in UPDATE (not P-Preferred-Identity), if option /pai is set.

137751 - Softphone-App did not work on myApps iOS 12

Fix for error message "Browser does not support WebRTC".

138492 - Softphone-App: Silent ringing while DND is active

Don't play ring tone while presence is set to "Do Not Disturb".

140402 - Softphone2: add sendingComplete attribut to setup message

Signaling bekommt jetzt ein neues "complete" Attribut in "UserCall" Message. Wenn true wird dieses "complete" Attribut in "setup" Message hinzugefügt.

140890 - TLS 1.3: Use separate session tickets per local certificate

The TLS client should use different session tickets for connections using the device certificate and connections using the installed certificate.

Otherwise the registration option "Prefer installed certificates" would not take an effect on the next registration.

137266 - Tracing: SIP messages as complete text-dump

Write inbound and outbound SIP messages as complete text-dump to trace buffer.

140359 - Web Access: Rework device configuration

Devices are pre-selected automatically.

Name of selected devices is displayed on drop-down controls.

137420 - WebserverPlugin: Enable SetTransferInfo function for all IWebeserver* handler interfaces

Will be for 14r2, 13r3 and 14r1

13r3 Service Release 4 (137818)

139303 - Adding an App to an user failed if name of the App object contained the name of another App object

Exampe adding sql-console could not added if console existed as well

142560 - App Devices: do not allow to provision a device to a different domain if already provisioned

It is not longer possible to provision a device into another domain if the device is already inside a domain in devices.

If you want to reprovision a device to a different domain, you must first remove it from its current domain.

141168 - App Store: Download page shows "License needed" if license type was empty

If no license type or an empty one is defined on apps.json, then free should be set by default.

142399 - App Switchboard: CFx could not be edited if there were already diversions with boolean

If the user had already a call diversion defined which included a boolean, then the diversion of the same type could not be edited.

142323 - App Switchboard: No audio on retrieve with 2 calls on hold

If there are 2 calls on hold and you retrieve the first one, it did not work. A connect must be sent with the retrieve.

140840 - App Switchboard: Number of WQ agents where not updated to all opened sessions

If there are several switchboard sessions opened then the number and the list of users are not always updated when the switch is clicked changes.

141401 - App Users: Buttons not aligned

When clicking on the 3 dots button a small menu is opened. There the buttons were not well aligned.

142325 - App Users: Crash if no data returned when reading node prefix

A check if the query returned data or not was missing.

137457 - App Users: Crash when reading users if no escapes where parsed

When reading the users list for the Users App, if there were no escapes to parse the node prefix the instance crashed.

142044 - Fax: T.4 decoding

Line decode errors occur with correct data. This is fixed now.

141741 - Fix for problems related to 3-party-conference

Fix for problems related to 3-party-conference in combination with "Busy on ... calls" option.

Missing video during 3-party-conference and ghost calls to non-participants.

143389 - Fix for unexpected restarted caused by torture testing

Special crafted SIP messages caused a controlled  restart.

142344 - Force HTTPS funktioniert nicht mehr

Fix for the Fix 140654  

140654 - http: Exclude install.htm and configured homepage from "Password protect all" option

The configured homepage is for example appclient.htm

142882 - IP-DECT: Exchanging a base station causes disconnects

If a removed base station is exchanged with a new one, the move-RFPI command causes a disconnection of all base stations. This is fixed now.

141934 - IP-DECT: Radio registration alarm timeout increased

If radios are not registered, the timeout to send an alarm is increased to five minutes in the case if the IP-DECT switches from standby to the active role.

142610 - IP222A: fix hanging transfer to IP2x2x extension

When large Favourite lists were  sent to the ip2x2x extension module the data transfer did sometimes hang. Subsequent transfer request were queued. The  large buffer allocated to each queued request finally raised an out of memory assertion. 

142557 - IP222A: Lost keys on short key press

When dialing a  number fast on the keypad some digits may be lost. 

The debounce timer was 60ms.

The debounce timer is now decreased.

141186 - Kerberos: OEM fix for password length

The maximum password size was increased before. But it did not work using replicated Kerberos servers yet. This is fixed now.

141738 - myApps for Windows: add support for webcams with 25 fps rate

This frame rate was not implemented and customer webcam was not working

142388 - New PBX Node Flag: Members not to be called

Indicates that no calling party number should be generated to address these members without the node prefix. Needed for e.164 scebarios in countries with inconsistent numbering plan (e.g. Switzerlans)

143402 - Phone IP222A: upload IP2x2x firmware after each reset of IP222A

After an IP222A firmware upload the IP2x2x extension module kept running the firmware uploaded at the last powercycle. now on an IP222A reset the IP2x2x is reset via command too and receives a firmware upload after restart.    

142315 - Phone-App: Ignore recording-calls

When Recording-by-Call is used, the deskphone has 2 connected calls:

- the real phone-call

- the recording-call

Phone-App must not display a 3pty-confernce.

142922 - Phones: Could not start consultation call while inbound call is waiting

There was no way to start an outbound consultation call in a situation like this:

- having one call connected

- having one (or more) inbound waiting calls

Now the plus button [+] is available to start an outbound consultation call.

142312 - Phones: New symbol displayed when recording is OFF

There are two different recording symbols now.

One for active recording and different one for non-active recording.

Used on the button for recording-control.

142938 - Phones: Start USB controller 10 seconds after boot

extension module firmware upload runs smoother when not struggling with the the basic startup process

142408 - Potential problem with H.323 registration thru RP

Due to uninitialized data

140425 - RCC on mobility does not show diversion info

leg2 info was missing

140948 - RCC-API: Incoming call UUI missing in CallInfo

UUI received with SETUP did not appear in CallInfo.

(Or received in User-To-User with INVITE.)

142383 - Rcc-App: Diverting party info was missing in Windows notification

Diverting party info was missing in Windows notification.

143193 - RCC-App: Fix for wrong Missed-Call notification

There was a Missed-Call notification when an incoming call was accepted elsewhere (e.g. broadcast call).

141025 - Rcc-App: Lookup phonenumbers in local Outlook

When receiving calls without display name a lookup in local Outlook is performed to find a display name.

142467 - Rcc-App: not possible to start a second call

If a call was already connected a second call could not be startet

140115 - regex: make non-ascii characters in pattern working

non-ascii characters (UTF8 codes) in a regex pattern did not match the same characters in string  anymore since 13r3 final.

 

141688 - Reverse proxy, PBX: case independent matching of MAC address and certificate name

Registrations over TLS failed, if the case of the mac address in the device certificate and the register message had a different case.

Base problem: IP73 sends its MAC address in the registration in a different case than in the certificate.

142552 - SCNF interface: More available channels

The software conference interface got more available channels for some devices:

• IP311: 15 channels
• IP411: 15 channels
• IP511: 30 channels
• IP811: 30 channels
• IP0013: 150 channels
• IP6013: 150 channels

138824 - Setting device admin account by !config change was not possible anymore

collateral damge when increasing password length

142367 - SIP-Provider Profile AT-4Ts_Computers-SIP_Trunk

New SIP Provider Profile

142380 - SIP-Provider Profile AT-Swissnet-SIP_Trunk

New SIP Provider Profile

142384 - SIP-Provider Profile CH-Plus_Vier_Eins-IPTelefonie

New SIP Provider Profile

142381 - SIP-Provider Profile CH-Swissnet-SIP_Trunk

New SIP Provider Profile

142992 - SIP-Provider Profile CH-UPC Business-SIP_Trunk

New SIP Provider Profile

142364 - SIP-Provider Profile CH-VoIP_Tel_Internacional-SIP_Trunk_Voip_Tell

New SIP Provider Profile

142379 - SIP-Provider Profile DE-4Ts_Computers-SIP_Trunk

New SIP Provider Profile

141861 - SIP-Provider Profile DE-Netcologne-SIP_Premium_TLS

New SIP Provider Profile

142385 - SIP-Provider Profile NL-Enreach-SIP_Trunk

New SIP Provider Profile

140714 - SIP: Fix for From-URI with IP6 address

IP6 address was not in square brackets in headers: From, P-Asserted-Identity, P-Preferred-Identity

143213 - SIP: Saving energy on mobile devices

Saving energy on mobile devices by NOT starting a timer-tick.

141754 - Softphone-App: Cannot answer incoming call while DND is active

Cannot answer incoming call on Softphone-App while own presence is set to "Do Not Disturb".

141775 - Softphone-App: Clear search input control when call is started

Clear search input control when call is started.

Like already done in Phone-App.

142345 - Softphone-App: Could not dial Universal International Freephone Service (+800)

Could not dial Universal International Freephone Service (+800) from Softphone-App or Phone-App.

A zero was removed from entered number.

E.g. +80002000951 -> +8002000951

141997 - Softphone-App: Could not send DTMF during Early-Media

Now DTMF can be sent as soon RTP channel is established.

Required to send DTMF to waiting queue.

142112 - Softphone-App: Fix for console error

Fix for console error (Uncaught TypeError: Cannot read properties of undefined (reading 'cameraPaused'))

137845 - Softphone-App: Indicate if trunk recording is active

Show recording indication while remote recording is ongoing (trunk).

142322 - Web-Access: Fixing device trouble on Firefox

Load Web-Access.

FF does not provide devices (cam and mic as "unknown"; speaker none at all) .

FF asks for permission.

User allows access (not persistent), but still no devices listet.

Only when persistent access is granted and website is reloaded, the devices are listed.

13r3 Service Release 5 (137834)

144055 - App Devices: fixed iSC calculation in the UI for project discounts with hardware rental with not yet rented products

The iSC calculation in the UI was wrong if a project discount was bound with hardware rental products where no such product was yet rented at all.

The server side iSC calculation was not affected.

143898 - App Store: Store and send JSON data in chunks

Apps.json is already bigger than WS_MAX_DATA_SIZE.

143547 - App Switchboard: 2 clicks are needed to cancel a transfer

To be able to cancel a transfer the button had to be clicked twice.

143523 - App Switchboard: Calls cannot be parked if another call is ringing

On the phones if there is another call ringing you cannot unpark a call. This must be also de case on the Switchboard App, otherwise even if you unpark it the call will be still ringing on the phone.

143725 - App Switchboard: Contact is sometimes deleted from BLF

A contact in BLF uses the Search API to get the contact data. If the Users APIs answer arrives before than the contacts one, it could be deleted from the BLF because no data has arrived.

143549 - App Switchboard: Contacts with no phone cannot close BLF details

If a contact on the BLF has no phone number, when opening the details a JS error prevent the dialog to display the close icon.

143554 - App Switchboard: Display the Info field from Contacts

In the old Operator, we had the option to add manually Info to a User ( for example. Employee is free on Friday). This missing feature could be solved by just showing the Contact Details field, Info Field.

Changes can be done in the Contacts App and it is shown in Contacts App for all Users and in the BLF for the Switchboard App users.

143759 - App Switchboard: Number normalization missing when starting a call

Phone numbers from contacts must be normalized to be able to start a call.

143535 - Enable "password protect all HTTP pages" in install.htm

After completing the installation, the option shall be enabled by default.

Idea: hide information like device type, MAC address, firmware version that is displayed on the start page of the advanced UI.

143987 - HTTP-client: fix handling of 401 responses with chunked encoded payload

To prevent sending the same packet twice for PUT requests first a PUT with length 0 is sent to check if authentication is required.
After a 401 response the full packet with the required header is sent then.
This did not work work when the 401 response  included a chunked payload, for example an error message explaining the reason for the 401 response. 

144528 - IP-DECT: Trap with user license check

This is a fix for the previous fix "IP-DECT: User license check with UI".

143758 - IP111/IP112: support for new hook switch version

Starting with IP111 HW1501 and IP112 HW1601  use a new hall sensor for the hook switch function, and this software fix is needed for the new hardware

143401 - IP6013: Update DSP code

Try to fix sporadic DSP crash.

Update from DSP code from 721.64 to 724.33

143762 - myApps: Add new languages ca and eu

We added the languages Catalan (Català) and Basque (Euskera) to the list of supported languages.

Texts that are not translated yet will default to Spanish.

143522 - PBX Manager: Avoid wrong authentication popups with "Password protect all pages"

If the option "Password protect all HTTP pages" was enabled, the browser showed an authentication popup when opening PBX Manager, asking for admin credentials. 

144061 - Phone-App: Added "Cancel transfer" button

Button appears when Transfer button was clicked on active call.

143990 - Phone-App: Display Transfer-Button at favorites

Display Transfer-Button at favorites while having an active (transferable) call.

144064 - Phone-App: Smooth sliding tab marker

Like Calllist-App has implemented.

116999 - phone: USB Headset - adjust plugin timing for Plantronics BT600 dongle

New versions of the Plantronics BT600 USB/Bluetooth Dongle need more than 1000 milliseconds to reach stable connected state after plugin. For former versions and all other devices supported so far 300 milliseconds were sufficient 

143817 - Reverse-Proxy: Add Via header to forwarded SIP requests

Reverse-Proxy must add Via header when forwarding SIP requests to outside.

143464 - SIP: Fix for parsing multipart bodies

Parsing of multipart body terminates prematurely in some cases. Could result in SDP being NOT processed.

143542 - Softphopne-App: Auto-onhook did not work in some cases

Auto-onhook did not work in cases where "disc" was received instead of "rel".

144041 - Web-Access-Client: Fix for JS error

E.g.

Failed to execute 'setParameters' on 'RTCRtpSender': Failed

to set parameters since getParameters() has never been called on this

sender

143406 - Working App on Release Store

The beta version of the working app is already available on the release store. This version is license free.

13r3 Service Release 6 (137840)

144457 - App Profile: Added timeout to enable diversion input field

Added a timeout to enable the input field when the diversion is edited if the search failed.

144284 - App Store: Assert when requesting the apps.json from UI

Assert because the chunk was bigger than WS_MAX_DATA_SIZE which was requested from the Webbuild menu on the upload dialog. 

144505 - App Switchboard: Ignore call info on callback email from history

If an callback request email is triggered from the history and not the BLF, then the active call info should not be added to the email, as it happens if there is no active calls.

144753 - App Switchboard: Prevent user update on PBX if no config has been received

If GetObject was answered empty, then when the user joins/leaves a queue an UpdateObject is triggered with empty parameters, which deletes the user's configuration. 

145482 - Chat to group with attachment but without text did not work

Chat was forwarded only if there was text

145342 - Fix traces of events SOCKET_CONNECT_COMPLETE and SOCKET_ACCEPT_COMPLETE

Trace problem only, no functional issue:

Remote certificate name could contain random characters, as it was not copied properly to the trace buffer.

144341 - Hide recording-calls from call-list

Hide recording-calls from call-list.

- Do not display in call-list on phone device

- Do not display in call-list on myApps (reporting)

144370 - innovaphone myApps Connector for Microsoft 365: Reconnect due to unexpected HTTP shutdown in Token Provider

Sometimes it can happen that the connection of the Token provider gets an unexpected shutdown. It should try to reconnect to get a token from Microsoft.

145779 - innovaphone myApps Connector for Microsoft 365: User notification can lead to undefined behaviour

If a user notification arrives during the initialization of the Connector, the presence subscription does not work properly.

145339 - myApps Windows: Optionally use the Echo Canceller of the Windows Voice Capture DSP

For internal testing purposes.

145485 - myapps: headset plugin/remove not correctly detected

headsets with names containing special german character are not properly recognized sometimes

144170 - Phone-App: Display Transfer-Button at search-results

Display transfer-button on search-results, while an active call is present.

144178 - Phone-App: Fix for external call info

Info provided by other apps using the com.innovaphone.phone API was displayed on wrong call.

144581 - Phone-App: Fix for sporadic fails when adding video

Fix for sporadic fails when adding video channel to an audio-only call.

144282 - Phone-App: Sometimes display names missing in call history

Display names from local Outlook missing in call history, if Phone-App was started before Outlooksearch was started.

144227 - Phones: Let simple R-key abort a non-connected consulation call

Let user abort a non-connected consultation call with simple R-key press.

143420 - RCC-App: Fix for unstable OS notification

OS notification sometimes appear, disappear and re-appear when new call comes in.

145742 - SIP-Provider Profile AT-4TS-SIP_Trunk

Update name of profile

145744 - SIP-Provider Profile CH-4TS-SIP_Trunk

Update name of profile

145741 - SIP-Provider Profile DE-4TS-SIP_Trunk

-Update name of profile

144366 - SIP-Provider Profile DE-Deutsche_Telekom-CompanyFlex_TCP

- Update SIP Profile, adding of CDPN-Out MAPS for calls with local subscriber number.

144367 - SIP-Provider Profile DE-Deutsche_Telekom-CompanyFlex_TLS

- Update SIP Profile, adding of CDPN-Out MAPS for calls with local subscriber number.

144453 - Softphone-App: Remote party information not updated on transfer

Remote party information not updated when getting transferred to an anonymous caller.

13r3 Service Release 7 (137863)

146577 - AP Manager: Fix stop instance when a services crashes

The stop instance task is stopped when an instance crashes on stop.

147613 - App Devices: add checkmark to select/deselect all domains

Added this checkmark to be able to quickly deselect previously selected domains.

146639 - App Devices: security fix for a possible privilege escalation through the provisioning process

Requirements to perform the attack:
* enabled checkmark "Deploy domain passwords on all devices" on the domain
* standard PBX user account with access to the Profiles App

Attack scenario:

* phone provisioning using the Profile App could be abused to gain access to the domain password by authenticated but non-privileged users

Fix:
* the creation of provision codes through the Profiles and Users Admin App now creates non administrative provision codes
* the creation of provision codes through the Devices App creates administrative provision codes (as just administrators have access to the Devices App)
* if a non administrative provisioning code is used, the provisioned device gets a random password as administrative password
* if an administrative provisioning code is used, the provisioned device still gets the domain password

Already provisioned devices:
* all non phone devices will be automatically handled as if provisioned with an administrative provisioning code and will still get the domain password
* all phone devices will still get the domain password, but you can decide to switch these devices to random passwords too: <a href="https://wiki.innovaphone.com/index.php?title=Support:Device_password_deployment_mechanism_changed_in_13r3SR7/13r2SR25" target="_blank">https://wiki.innovaphone.com/index.php?title=Support:Device_password_deployment_mechanism_changed_in_13r3SR7/13r2SR25</a>

New devices:
* all devices provisioned by the automatic provisioning process will get random passwords (no matter which device type)
* a device provisioned with a provisioning code will get either a random or the domain password depending on how the code was created (see Fix above)
* phone devices added manually in the Devices UI will get random passwords
* non phone devices added manually in the Devices UI will get the domain password

Direct access to a device with a random password:

you can request the clear text password in the Devices App in the settings of a device

If you reprovision an already provisioned device, the device will get a new random sysclient password.

Discovered by PenTesting of SSyS

147181 - App Platform Manager: fixed potential trap while the manager closes

If the vaccumdb process finishes after the manager database connection was closed, a trap occurred.

147554 - App Profile: Reduce diversions search timeout to 5 seconds

It was 10 seconds before.

146472 - App Store: Parse JSON in chunks

The customer uses the first option to add a build from our Release Store. There the decode apps.json exceeded the JSON limits. There the JSON must be parsed in chunks as it is done on the Manager.

147525 - App Switchboard: Contact dialing not working anymore

If phone number with text caracters should be called as e164 and not as txt

147507 - App Switchboard: Wrong contact displayed if several contacts had the same CN

The link property returned by the SearchInfo message must be checked to be sure that the right contact is displayed.

148169 - Firmware http client shouldn't connect to local drive with DNS names in URL

The URL <a href="https://dns.com/DRIVE/CF0/..." target="_blank">https://dns.com/DRIVE/CF0/...</a> caused the http client to connect to the local drive instead of resolving dns.com in some cases (seems to depend on the network interface configuration).

145771 - Fix for media problem when Softphone-App is used with Media-Relay

Endless re-negotiation loop when two Softphone-Apps calling each other with Media-Relay.

147119 - Gateway: Support H.323 local domain

For H.323 federation, if PBX System name does not match DNS Domain

146088 - myApps Softphone: New config option "No physical location"

There is a new config option PBX / Config / myApps / Softphone Registration / No physical location that changes the Softphone behaviour.

If the checkmark is enabled, the Softphone in the myApps Launcher will not use any physical location, unless it is explcitly configured. So in general the trunk line of the actual registration PBX will be used.

For details see:

• Reference13r3:Concept_Softphone_Redundancy#In_the_myApps_launcher
• Reference13r3:PBX/Config/myApps#Softphone_Registration
  

147672 - myApps: Wrong initial presence in header of focus app

If an app was started and then set as the focus app, the header showed presence available instead of the actual presence. After the first presence update the presence was correct.

146990 - myPhoneKeys App on Release Store

The final version of the myPhoneKeys App is available on the release store.

146490 - Name information was not always visible in Windows Notification

Name information was not always visible in Windows Notification.

147052 - Non-premium chat: First message was sent only after connect from the remote side

This way no windows notification was created with first message and sequence of messages could be changed

147056 - PBX Waiting Queue: Set Operator Presence feature did not work if operator used softphone and softphone was not yet registered

Softphone not yet registered is normal after startup of myApps. It is typically only registered after wakeup with call

147129 - PBX XML Import did not restore password anymore

collateral damge from increasing the password length

147777 - Phones: Wrong symbol on retrieve-button

Retrieve button does not display "play" symbol.

Instead it displays "pause" symbol.

While the call is on hold.

147718 - Plugin Waiting Queues: Boot-Not set as null when updating agents

The waiting queue PBX object data was overwritten with the result of GetObject but the bool-not parameter was received as string instead of boolean.

148328 - RCC-App: Could not pick calls from other Softphone-Apps

Pickup on RCC-App did not work when trying to pick a call from a Softphone.

146998 - RCC-App: Hide button for diversion activation/deactivation on favorites

Must hide button for diversion activation/deactivation on favorites, because this feature is not available in RCC-App.

Button did not work at all.

146691 - RCC-App: Pickup did not work sometimes

Calls could not be picked by Call-GUID via RCC-API.

147592 - RP/SIP: Fix for Via header added by Reverse-Proxy

Fix for Via header added by Reverse-Proxy.

Problem was: branch value in CANCEL was different from branch value in INVITE.

146297 - SIP-Provider Profile CH-VoipTel_International_SA-SIP_Trunk_VoipTel

Update name

146318 - SIP: Fix for GRUU handling

Fixed an issue for Globally Routable UA URI (GRUU).

Paramters "gr" and "gruu" should NOT contain angle brackets, while "+sip.instance" should.

E.g.

Contact: <sip:callee@192.0.2.1>

;pub-gruu="sip:callee@example.com

;gr=urn:uuid:f81d4fae-7dec-11d0-a765-00a0c91e6bf6"

;temp-gruu="sip:tgruu.7hs==jd7vnzga5w7fajsc7-ajd6fabz0f8g5@example.com;gr"

;+sip.instance="<urn:uuid:f81d4fae-7dec-11d0-a765-00a0c91e6bf6>"

;expires=3600

145983 - SIP: Fix for unexpected restart

Fix for crash in SIP stack.

(Assertion failed line 10266 in common/protocol/sip/sip.cpp, !channel)

147375 - SIP: Fix for unexpected restart

Fix for unexpected restart.

145906 - Softphone-App: Display error message when diversion activation fails

Diversion activation may fail due to administrative restrictions.

147635 - Softphone-App: Fix for unneeded headset activation

Problem reported with Jabra 930.

The headset was always active while Softphone App was started. Headset LED is always ON and battery is discharged.

148162 - TURN server: Wrong LIFETIME value in REFRESH_RESPONSE messages

The TURN server echoed back the LIFETIME value from the REFRESH_REQUEST, but actually used a fixed value of 600s. This led to connections losses, because clients requesting a longer lifetime used a wrong value and did not refresh on time.

With the fix, the TURN server always answers REFRESH_REQUEST messages with the actual value of 600s.

147288 - Twin-Phone: A connect on a call could disconnect a call on another endpoint, which is also waiting on this endpoint

Example a call is sent via WQ to endpoint A and B. On A another call is received and connected. This disconnected the original call on B

142948 - Unite support

Unite support for innovaphone DECT devices IP1203 and IP1202 is added.

13r3 Service Release 8 (137877)

149305 - AP Manager: Enhance logging in statistics tasks

• To investigate a potential hanging statistics task
  

149035 - App Platform Manager: restrict access to manager logs

The log file directory of the App Platform manager itself had wrong access rights which allowed read access for non root users.

147721 - App Profile: Store CFx when the Search is triggered

When entering a CFx the input value must be store on the local storage before the search is triggered. Otherwise if the user does not click on any search result, then nothing is stored and when opening the app again the field is empty.

149671 - App Switchboard Admin: Replicator not working on master-slave scenario

The Switchboard Admin uses the replicator to get the list of users. This connects randomly to the master or the slave, which may generate a different list of users. 

A config item has been added to define the PBX to connect and if empty it works as before.

148211 - App Users: User details not displayed when the app was opened

If the user opens a user from the homescreen, then closes the user details, goes to the homescreen again without closing the app and clicks on another user to open again the user details, then they are not displayed.

149889 - App Working: Updated break suggested texts

Update the texts displayed when a break is suggested after 6 or 9 hours. To fit the new texts the size of the dialog must be increased.

148704 - Conference App in location PBX does not work correctly

• No badge counts
• No active conference participants shown

145949 - Do not offer RTCP-Mux in SELECT message if PROPOSAL arrived without RTCP-Mux

Signaling did not check if remote peer was using RTCP-MUX and set RTCP-MUX always to true. 

148862 - ipxx11-AP: set complete AP/OS communication area to uncached

When the AP is started 1 MB RAM is reserverved for communication between the AP and the innovaphone OS  (ethernet & console) but only one half was set to uncached. Now the complete area is set to uncached.

148377 - ipxx13: improve SSD detection info

sometimes an SSD is not detected after reboot, thus more info about the detection process is required. 

149629 - myApps: Small fixes for closing behaviour of popup dialogs

Some popups closed erroneously when the client received updates.

Some popups didn't close when another popup was opened.

149697 - OAuth2: allow configuration of additional authorization URL query parameters

You can e.g. configure '&prompt=login' for Microsoft AD to enforce a relogin independent of already existing OAuth2 sessions.

148763 - PBX CDRs: rel-to/rel-from missing on CDRs from Broadcast in some special call scenarios

For example for forked calls, which get picked

148216 - PBX: App Service Licenses not updated in the testmode

The AppWebsocket connection from the PBX to the App Service was not reestablished when changes were made to Licenses (Service Lic) on the App object if testmode was active. It is necessary to send changes to the App Service. Now the AppWebsocket connection is always reestablished in testmode when any changes are made to the App object are done.

147122 - phone: restore hotdesking registration after reboot

By default all hotdesking registration info at the phone is deleted after reboot but in certain cases it's required to restore the registration after reboot. This is controlled by the new checkmark Restore Registration after Reboot  in the configuration menu of the hotdesking key

146146 - phone: USB headsets - support for yealink headsets

Add support for Yealink headsets:

• UH38 Mono Teams-'W/O BAT, Product: USB Wired Headset, Model: UH38 Mono
• WH62 Dual UC DECT Wireless Headset, Model: WHD622/WHB620 (Headset/Base)  WH63 DECT Wireless Headset,   Model: WHM631/WHB630 (Headset/Base)

148722 - phone: USB Headsets -additional product ID for Jabra Evolve2 40

The Jabra Evolve2 40 headset is now sold with product ID 0x0e43 instead of 0x0e41. The additional ID is added to driver.

147730 - RCC/Softphone-App: Problems when starting consulation call

Sporadic problems when initiating consulation call on RCC-App.

Sometimes the consulation call was not displayed in RCC-App.

148735 - Remote-Control added to CDRs

To allow to identify special calls, like recording

149968 - SIP-Provider Profile DE-Vodafone-IP_Anlagen_Anschluss_TCP

New SIP Provider Profile

148765 - SIP: Do not reject REGISTER with "420 Bad Extension"

Do not reject REGISTER with "420 Bad Extension" if it contains "Require: gruu".

148671 - Starting a 3-pty conference with phone app could result in diversions to be executed unexpectedly

Disconnecting video calls could result in execution of CFNR at initiator of conference

13r3 Service Release 9 (137886)

150227 - App Platform Manager: reconfigure sysctl.conf to support coredumps for long app service ids

The old sysctl.conf configuration didn't support coredumps for long app service ids.

Now the coredump is generated correctly for such ids.

150776 - App Reports: speed up calllist queries

The calllist queries could take up to 30s for certain report databases depending on the call amount, even on fast x86_64 platforms.

The calllist queries have now been changed so that such a query just takes around 1ms.

This should be quite a performance boost even for databases which didn't suffer of performance issues yet.

151256 - App Store: New builds on 3rd-party apps not always schon as available to upload

In the apps.json not always the latest major release is placed first.

149930 - App Switchboard: Changing the device several times will duplicate the calls displayed

When the user changed the selected device several times and a new call alerts, it will be displayed duplicated.

151010 - App UsersAdmin: Wrong cd on config after editing

If a CFx is edited on Users Admin, then the cd shown on the config is not right. If h322 is set, then an empty string is added for the e164 and vice versa.

150700 - Firmware httpclient: increased maximum allowed HTTP header size

An HTTP header larger than 2000 bytes caused an HTTP client request to fail.

Now the header can be 32k bytes long.

150702 - Firmware OAuth2: ignore x5t parameter in keys JSON

The x5t parameter is not mandatory and thus not checked anymore now.

150979 - Firmware SMTP: STARTTLS Not Working with Tobit Server

2nd EHLO Response, containing a STARTTLS line, triggered a 2nd STARTTLS. The session was terminated with 503/Bad Seq. of Commands.

150834 - ipxx13: add "dbg-out"command to send text to serial port

in test scenarios where a serial logger or a serial/USB adapter is connected to the serial port  a command to send a line of text to the port was missinng.

"!mod cmd CPU dbg-out <text>"

sends <text> followed by a newline to srial port. 

150867 - phone IP240A,IP101,IP102: indicate broken gatekeeper or network connection in active call

On IP240A  and on all other phones based on INCA chip  and also on IP101 and IP102 a broken network or gatekeeper connection was not indicated while a call was active.

Now the call duration counter is replaced by the corresponding "network down" or "gatekeeper not connected" icon in this case. 

150443 - Phone-App: Display-Name not always displayed

Sometimes the remote party's display name was not displayed in media-panel.

150791 - Phone-App: Sometimes pickup was not offered at a favorite

After initiating a semi-attended transfer the pickup button was not displayed at the favorite where the call was transfered to.

151043 - phone: USB headsets: make some old headsets working again

some old headsets did not work correctly anymore after upgrade to sr8 because of a change in hookswitch handling for fix #146146 - phone: USB headsets - support for yealink headsets

151052 - Phones: Fix for Hotdesking fkey on extension module

Login screen was not visible under some conditions when HOTDESK fkey on extension module was used.

150981 - Range of forking delay value should be checked

A negative value or a very high value  could cause a trap

150498 - RCC-App: Fix for phone number normalization

Phone number "+49 (0) 173..." was wrongly normalized into "+490173...".

151418 - SIP-Provider Profile DE-Deutsche_Telekom-CompanyFlex_TCP

edit cdpn-out

151266 - SIP-Provider Profile DE-Deutsche_Telekom-CompanyFlex_TLS

edit of the cdpn-out maps

151426 - SIP: Allow session refresh interval smaller than 30 seconds

For specific application a smaller interval may be required.

146555 - SIP: Fix for problems on presence interworking with Estos procall 7

If Estos procall 7 is used as External UC.

150982 - SIP: Fix for URI parsing

Problems parsing SIP-URI's with "ext" parameter in user-part

150993 - SIP: Fix for wrong RTP port in SDP

If different ports were offered for RTP and SRTP.

150542 - Softphone-App: "No Ringtone" did not work

Ringtone was played if "No Ringtone" was selected.

150454 - Softphone-App: Do not play busy tone if another call is active

Do not play busy tone when remote party (on hold) hangs up, if another call is active.

150450 - Softphone-App: Get display name from favorites

Problem on Softphone-App in context of native-client.

If remote-party number matches one of the favorites, the display-name of the favorite is now displayed.

151160 - Softphone-App: No ringing on incoming calls

Local ring-tone was not played on incoming call if Softphone-App is running in browser-context.

Was no problem in context of native myApps client.

Bug was introduced with SR8.

151387 - Softphone-UI: Avoid overlapping buttons on very narrow layout

Media panel buttons could overlap on very narrow layout.

13r3 Service Release 10 (137898)

151770 - App Profile: Photo not cropped right on narrow windows

If the window width is smaller than the photo, the photo is resized but when cropping it the original size was taken into account.

151760 - App Store: DB error when restarting the service

PSQL error on a query during the initialization of the DB.

152847 - App Switchboard: myApps freezing when docking/undocking the app

The beforeunload event has been removed and the log out from groups is now done on the service side.

152846 - App Switchboard: Shortcut to connect 2 calls not working

The state holded was not allowed for the transfer. If you connect 1 call, starts another call and it is connected, the first one will be on hold. 

152719 - App Users Service: Removing the domain from the email cannot be case sensitive

When adding a new user with the registration form or using the password reset form, the email domain is removed if it is the same as the PBX domain. This must be case insensitive.

153478 - App UsersAdmin: Take picture from camera on browser not working

JS error of undefined variable prevents the picture from been take. 

153263 - App Working Manager: Error on CSV export when file size > 65535 and added time interval

When the CSV file was too big, there was an error from the Webserver and the data must be sent in chunks. Added also a popup to select the time interval for the times and the absences for the export, so that not all DB is exported but just the desired times.

152985 - App Working PBX Plugin: App object URL not parsed right if the URL ends with extension

Wrong parsing to know if it is Working User or Working Manager if the App Object URL ends with ".htm".

151338 - App Working: Rework CSV export files

Added to times.csv:

• personal number
• start date
• start time
• stop date
• stop time

Added to absences.csv:

• date
• personal number

139296 - Connector for kuando®: Config App - Temporary calendar entry was used for the led

If you have a manual status in myapps, then apply the automatic calendar entry and then open the config app, the calendar entry is incorrectly used as the status.

152961 - Connector for Kuando®: LED unexpectedly turns green during a call after a HUB update

There KuandoHUB Version 2 send unexpected Websocket messages which will cause an unexpected LED state.

151841 - Connector for kuando®: Lost lamp state after manual myApps presence and a later recieved temporary calendar presence

The state of the lamp will not be overwritten (and lost) anymore if the temporary calendar entry arrive. myApps will recover automatic to the correct state when the calendar entry is gone.

148246 - Connector for kuando®: myApps reload or new browsertab remove call state

A running call-state in the launcher was removed if you reload the launcher/browser or open myApps in the browser

152615 - Cumulative update for TLS

Support for additional signature schemes in X.509 certificates with RSA keys

• sha256WithRSASSAPSS
• sha384WithRSASSAPSS
• sha512WithRSASSAPSS (needs 2048-bit or larger key)

Allow creation of 3072-bit certificates and certificate requests on the advanced UI

Fixes for TLS 1.3 ticket cache

• Invalidate stored TLS tickets when installing a new device certificate
• Fix for storing TLS tickets in VARs
  

151742 - Media interface: do not disconnect an interface until the call is terminated

- User has two interfaces.

- Only one interface gets RELAY candidates (avoid using too many allocations)

- User starts or gets a call and connects with the no TURN interface.

- Interface with TURN allocations must be left opened in case a transfer happens because ICE may now need TURN candidates to connect.

151844 - Media interface: SRTP fails due to RTP sequence jump

SIP Provider is generating RTP sequence changes every 30 seconds and some of them produced authentication errors.

151768 - myApps Windows: added commandline argument to get chromium major version

myApps.exe --version-chromium-as-exitcode

This returns the chromium major version as exit code and myApps exits at once.

Needed for nightly test automation.

151634 - myApps: redundancy information about primary PBX was lost on manual reload

If the user right-clicked the myApps window and then reloaded the page, the primary PBX was set to the current PBX.

Instead the primary PBX from the config should be kept.

153297 - PBX sometimes hanging calls when using Phone App

collateral damage from SR8 148671 - Starting a 3-pty conference with phone app could result in diversions to be executed unexpectedly

152335 - PBX: Increase size of SOAP Admin messages

The size of XML messages for SOAP Admin commands increased from 10000 to 64000 bytes.

152728 - Phone-App: Show app-sharing in large-view

When entering a conference and someone is already sharing desktop, this app-sharing-content must be displayed in large view automatically.

Otherwise the UI starts in gallery-mode.

146758 - Profile/UsersAdmin App: Display the service property on provisioning

In the Users Admin/Profiles UI when there are multiple entries in the "providers" array with the same "title" , use the "service" instead "title" property to display. The "service" property is the long name of the app object and is unique.

152638 - Remove H.323-NAT Logging option from config

H.323-NAT is not supported anymore

152119 - SIP-Provider Profile FR-Sewan-Trunk_SIP

New SIP Profile

151473 - SIP-Provider Profile NL-Vodafone-Vodafone_One_Fixed

- Update of Profile

151496 - SIP: Fix for ACK for 200/OK for forked INVITE

Fix for ETSI Conformance Test Specification for SIP (SIP_CC_OE_CE_V_019).

152984 - SIP: Fix for config option /keep-tcp-connection

Make config option /keep-tcp-connection work also on outbound TCP connections opened for subscriptions.

151497 - SIP: Must not send ACK to additional final responses

Must not send ACK to additional final responses, except to real retransmissions.

Fix for ETSI Conformance Test Specification for SIP (SIP_CC_OE_CE_V_038).

151931 - SIP: Provide user's external number in From-URI

Provide user's external number in From-URI.

151942 - SIP: SNI for TLS outbound connections

Use Server Name Indication (SNI) on outbound TLS connections.

151737 - Softphone-App: Avoid popup about missing video device

Don't check video devicen config if user has no video-license.

153079 - Softphone-App: Fix for sporadic no-video

Sometimes remote video is not displayed in UI although received.

153121 - Softphone-App: Sometimes local camera stays active after a conference call

 Sometimes local camera is not stopped at the end of a conference call. Upcoming calls cannot use local camera then. myApps needs restart to get camera working again.

152740 - Unlicensed chat did not allow concurent chat to different destinations

Chat window was closed instead of just hidden, when changing the destination

13r3 Service Release 11 (137919)

155698 - App Platform Manager: just use default NTP servers if no NTP servers configured

Just use default NTP servers like 0.pool.ntp.org if no NTP server is configured or received by DHCP.

153570 - app recordings: avoid permanent connect retries from replicated pbx

accept connection from replicated pbx and do nothing

155102 - App Switchboard: BLF users not loaded on master-slave scenario

If a user was connected to the slave PBX, the data of the users on other PBXs cannot be loaded.

155160 - App Switchboard: No busy signal when calling to a busy destination

Display that the user is busy if the call fails when User Busy is received, until user hangs up.

155635 - App Switchboard: Queues missing after changing the monitored device

After the connection reset when chaging the monitorized device, the queues where not initialized afterwards.

155715 - App Switchboard: WQ call still displayed on the app after it has been connected

To reproduce the issue:

• Start the Switchboard App on both users A and B.
• A calls B and B connects the call with the switchcboard
• C and D call the WQ
• A disconnects the call with B
• A connects the call from C (WQ)
• The call from C is removed from B's Switchboard
• B connects the call from D (WQ)
• The call from D is NOT removed from A's Switchboard

154057 - App UsersAdmin: Users imported (CSV) must always include CN

If no CN have been defined, the user data should be ignored.

155316 - Calculator App on Release Store

The release version of the Calculator App is available on the release store. The version is license free.

The calculator allows you to carry out simple and complex calculations. The range of functions includes:

• Basic and Advanced functionalities
• Trigonometric functions
• Calculations with different number systems
• Local history with insertable results

For details see:

• Reference13r3:Concept_App_Service_Calculator_App

154729 - Discard all previous TLS tickets on change of certificate configuration

If the device certificate or the trust list has changed, all old TLS tickets shall be invalidated on client and server-side.

154399 - IP222A: Checking "Phone/Protect/USB: Accept Audio Devices only" disabled extension module

When "Phone/Protect/USB: Accept Audio Devices only" was checked the extension module(s) did not boot. This is fixed now.

151983 - myApps for Windows: Chromium update to 117.0.5938.150

Chromium 117.0.5938.150

155626 - PBX:Send PresenceUpdate on Softphone Registration

If a Softphone was registered or unregistered no PresenceUpdate was sent on the presence subscriptions.

154052 - phone imx6 USB headset: Gigaset ION did not work

After plugin of the USB/DECT dongle of the Gigaset ION speakerphone/handset combo the USB controller stopped working until next powercycle. This is fixed now. 

155270 - phone IP102/IP112/IP222A : fix problem with headsets requiring 48kHz audio

Some headsets require 48kHz stereo audio and this did not work correctly over builtin or external hubs.

153672 - Phone-App: Fix for call diversion control

Diversion control wrongly indicated an active diversion.

155661 - prevent trap on IP DOS attack

on a certain DOS attack a trap in IPv4 could happen 

154026 - RCC-App: Fix for failed calls

Keep failed calls in UI until user hangs up.

This allows user see reason of call-failure (e.g. user busy).

152977 - Signaling: Payload Type in PROPOSAL was not updated in SELECT

Media Modules was using the remote payload for RTP but SELECT was still providing the default PT.

PT in SELECT is now updated with the payload type provided in the PROPOSAL message.

155089 - SIP: Fix for another certificate validation problem

Sometimes SIP stack rejected a remote server certificate. SIP interface did not register.

153987 - SIP: Fix for DNS handling

Take all available IP addresses and use it as fallback if SRV response contains multiple targets all with the same priority.

153693 - SIP: Fix for H.264 profile-level-id

SDP answer now contains the same profile-level-id as the SDP offer.

155307 - SIP: Send session refresh earlier

From 13r3 Service Release 9 on we send session refresh 2 seconds before expiration.

Turned out to be too late in some scenarios.

Better send refresh once half the session interval has elapsed.

155496 - Softphone/RCC: Support for overlap dialing

Added support for overlap dialing via RCC-API (UserCall + UserInfo).

13r3 Service Release 12 (137926)

156689 - App Contacts: Editing failed

Editing failed for a contacts searched by number

156240 - App Devices: fixed rental license usage if device has all available licenses bound

The rental menu was not usable anymore if a device had all available licenses bound.

156975 - App Platform Manager: fixed deletion of old users App log files

If an old users App with service id "users" has been upgraded to a new version with service id "usersapp", the old files haven't been deleted anymore.

156595 - App Platform Manager: fixed not working manual vacuumdb and further confirmation questions

The old confirm popup didn't work anymore and has been fixed for these cases:

- database vacuumdb of instances

- instance restore overwrite question

- manual webserver/manager upload question

- diskthreshhold start service question

156867 - App Reports: ignore h323/sip changes for pseudo objects

Avoid table updates for pseudo objects.

156563 - App Switchboard: With 2 parked calls the second could not be unparked after the first one

If there are 2 parked calls and the first one is unparked, the second one could not be unparked.

156156 - App UsersAdmin: Only the email of the first user was added on CSV import

Wrong parameter added.

156823 - Fix for AES hardware support on xx11 platform

The intialization contained a bug that could lead to sporadic traps.

157970 - Fix for possible trap in administrative PBX session commands

Before the command "PBX0/ADMIN execute /session" was used for automated testing, only. But as it is now documented in the wiki it has to be robust against wrong parameter values.

156859 - IP-DECT: Rare trap on user unregister

There can be a rare trap if the user's handset registration to the PBX is closed. It can occur during a configuration upload by an OEM update service. This is fixed now.

156526 - IP101/102: Allow to hide CLIR option

Fine grained function hiding: Allow to hide CLIR option (anonymous calling)

#define PHONE_HIDE_CALL_CLIR (0x00400000) 

156961 - myApps Windows Officeintegration: check URI case insensitive

Otherwise contacts are not found and thus the presence not updated in Office products.

156972 - myApps Windows: do not download updates if a DVL build version is running

If a myApps DVL build is running, an update shouldn't be downloaded and offered.

156257 - myApps: Avoid re-opening app links on app updates

App updates triggered the start.onargschanged event in the current active app. Therefore it erroneously looked to the app like the last app link was clicked again.

156995 - myApps: Handle "online" flag in visibility settings like on the phones

myApps did not show any presence information if the "presence" flag was not set in the visibility settings. So the flags "note" and "online" only worked together with the "presence" flag.

This was inconsistent with the phones where the flags have the following meaning:

​* Presence - show presence activity

• Note - show presence note

​* Online - show online state

155098 - PBX AdminApi: GetAppObjects could not read unlimited number of objects

Now the limit/more mechanism is implemented

155107 - PBX Manager Plugin for Waiting Queues: Editing groups did not work anymore

Collateral damage from 147718 - Plugin Waiting Queues: Boot-Not set as null when updating agents

155104 - PBX: Push/Wake was sent, even if no call was sent

This was caused by incosistent call handling, which caused other problems as well, like missing CDRs for calls rejected because of twin-phone setting

156950 - Phone-App: Fix for non-working search providers

Added 2,5 secs timeout for search queries.

151281 - phone: unregister key missing in hotdesking registration restored after reboot

On initial creation of a hotdesking registration an unregister key is provided automatically in the newly created registration. This key was missing when the registration was recreated after a reboot. 

156155 - Signaling: ignore call proceeding message if the call is connected

A proceeding message changes wrongly the status of the call and makes the disconnect ton play longer than expected.

157097 - SIP: Allow customized mapping of SIP code in reason header in incoming CANCEL

By default "reason=200" is mapped to Q931_CAUSE_NonSelectedUserClearing (26).

156293 - SIP: Fix for timer E in Proceeding state

A non-INVITE client transaction must re-transmit at a constant interval of 4 seconds after provisional response has been received (Proceeding state).

156745 - SIP: Fix for transaction handling

Incoming request was not detected as re-transmission if Request-URI was changed from original incoming request.

​But Request-URI does not matter acc. to RFC3261 17.2.3.

156921 - Softphone-App: Fix for double calls

Sometimes two outbound calls to same destination are initiated.

157873 - Softphone/macOS: Fix for JS exception on WebAudio API

JS exception:

   <a href="null" target="_blank">TypeError: null is not an object (evaluating 'ac.createOscillator')</a>

156227 - Softphone: Sometimes no name-lookup in local outlook

Sometimes no lookup for a display-name is performed.

157763 - Update of *.innovaphone.com certificate in trust list of devices

The current *.innovaphone.com certificate expires on 15.01.2024.

This software update installs the new *.innovaphone.com certificate to the trust list of all devices.

13r3 Service Release 13 (137934)

158643 - Adjust local number to international for reverse lookup

In case none of the prefixes match

159317 - Advanced UI: Prevent XSL injection

The servlets for the advanced UI accept an "xsl" URL paramter that

specifies the XSLT file for displaying the corresponding page.

Before this fix it was possible to specify a URL containing a colon represented in XML entity encoding.

​

CVE-2024-28722

157823 - AP Manager Login: Fix for brute force attacks

CVE-2024-24721

159763 - App Store: Check for new available versions not returning the greatest build

On Firmware and Software the check for available new versions on a source store was only checking the first entry of the array on the JSON but the greatest build is not always on the first entry of the array.

159791 - App Store: Display app title on the source store selection menu

Instead the ID, the title should be displayed for the apps and software. The user cannot always find the app looking for the ID.

159294 - App Store: Error on decoding apps.json if DB is empty

If apps.json is empty or includes just "{}" an error was show that the file could not be decoded, but the file content should still be valid and just no apps will be uploaded.

159762 - App Store: Firmware, software and app platform selection on source store empty after reopening the app

Unlike the apps, the selection of firmware, software and app platform is not retained.

158770 - App Switchboard: Check for duplicated call history entries not working with unknown callers

If the caller number is hidden, the check for duplicated entries on the call history does not work because the remote field does not exist.

157434 - Gateway: New placeholder "{internalnumber}" for config option "add uui"

Config option "Add UUI" on gateway route now supports placeholder "{internalnumber}".

159606 - innovaphone myApps Connector for Microsoft 365: Master Pbx Connection is displayed wrong

If the Pbx name and the configuration of the master Pbx in the connector match the entire length of the Pbx name, it is displayed in green, even if the configuration is incorrect.

158043 - IP29: remove ETH1 from Advanced GUI

The IP29 has not physical ETH1 interface and thus this is better not shown as a configurable interface.

158042 - IP6000: increase LLDP power request

Some switches do not provide more power than requested and thus a device may not boot completely. Now 13 W are requested.

158004 - JS SDK: Memory optimization for callbacks

Callback functions passed to the JavaScript Runtime left a small amount of memory after the callback was deleted.

159310 - PBX: Add QR codes for downloading myApps smartphone apps

We added pictures containing a QR code that can be used for downloading the mobile app for the version of the PBX.

The corresponding URLs are:

• <a href="https://<host>/PBX0/APPCLIENT/myapps_qr_android.png" target="_blank">https://<host>/PBX0/APPCLIENT/myapps_qr_android.png</a>
• <a href="https://<host>/PBX0/APPCLIENT/myapps_qr_ios_macos.png" target="_blank">https://<host>/PBX0/APPCLIENT/myapps_qr_ios_macos.png</a>

158223 - phone: USB headsets - support Yealink UH34, UH36, UH37, UH38

support for wired yealink headset models 

154736 - phone: USB headsets - support Yealink WH62, WH63, WDD60, WH66, WH67, BH71, BH72, BH76, BT51

Support Yealink DECT and Bluetooth headsets

159296 - Phones: Images from some Webcams not displayed

Images from some Webcams not displayed, if download size of image frame exceeds 0,5MB.

Allow up to 2MB download size per frame.

159724 - SIP: Fix for missing DNS refresh on interfaces without registration

Interfaces without registration did not refresh DNS information.

Now DNS information is checked on every outgoing call. If stale a new DNS query is performed.

158116 - SIP: SDP answer must have same media-descriptions as offer

SDP answer must have same media-descriptions as offer.

​The m-line's proto field must be equal in offer and answer.

("RTP/AVP" or "RTP/SAVP" or "UDP/TLS/RTP/SAVP" or "UDP/TLS/RTP/SAVPF")

158984 - Softphone-App: Calls handing after cancelled by RCC

Outbound call hanging in released state in Softphone-App after cancelled in RCC-App.

159581 - Softphone-App: Fix for disabled (grayed) connect-button

In some cases the connect-button remained in disabled state (grayed not clickable).

​May happen on a collision of local call-connect and remote call-cancel.

159323 - Softphone: Sometimes facility like name updates got lost

Depending on timing, when updates where sent during connetion establishment

157314 - Store lookup name in database when e164 from alert-to and lookup are equal

Before when parsing CDRs the e164 attribute of "setup-from" and "lookup" tags were compared before the looked up name was stored in the database as remote_dn. These values may be different (with or withour national prefix). What instead should be verified is the e164 of the "conn-from", "alert-to"... with the "lookup" e164 attribute.

​

<a href="<a href="https://mantis.innovaphone.com/view.php?id=362366" target="_blank">https://mantis.innovaphone.com/view.php?id=362366</a>" target="_blank"><a href="https://mantis.innovaphone.com/view.php?id=362366" target="_blank">https://mantis.innovaphone.com/view.php?id=362366</a></a>

13r3 Service Release 14 (137941)

161007 - #160633 - Fix crash when a to old recordings request is removed from the queue (list)

When recordings asks for the call meta data and recordings doesn't find these datas the reordings app tries for 8 hours before deleting the request. This caused a crash and is now fixed

161625 - App Recordings: Call info PDF shows the creation date of the converted file instead of the call

The date in the file name of the call info PDF is the date of the conversion instead of the date of the recording.

160633 - Fix crash when old recordings requests are removed

Recordings make request to the reporting app in order to find the meta data for a recorded call. These requests are stored in a list and processed one after another. In very rare cases, when a request was not processed for over 8 hours that request is removed from the list. This caused a crash and is fixed now. 

161505 - myApps Android/iOS/macOS: Use a distinct Web Server TCP Ports to avoid collision if different myApps versions are simultaneously used

Please note that after the update the user needs to enter the server name and to re-login to myApps once again.

160520 - Phone-App: Could not create favorite with identical names

Could not add a new favorite with a display name identical ot an already existing favorite.

159179 - recordings: check reportings for unobtained cdr

when the link between recordings and reporting is broken, the recordings are stored without the metadata. when the link comes up again while recordings is still running this info is retrieved. If recordings is restarted the missing info is never retrieved

161224 - SIP: Close unused TCP connections

Close TCP connection when registering at a different server. Keep the number of TCP connections low.

160381 - SIP: Fix for sporadic registration problems on SIP trunk (e.g. Telekom)

Fix for sporadic registration problems on SIP trunk (e.g. Telekom).

160866 - Softphone-App: Phone number not displayed in history panel

Sometimes the phone number is not displayed in history panel.

Only happens on entries where the display-name is retrieved from local Outlook directory.

13r3 Service Release 15 (137958)

162931 - App Contacts: mt:StatisticsResult Failed on Import

After an Import, the number of entries within the database didn't show up anymore.

163247 - App Fax: DB error with latest SQL-DB version

There is a DB error with the latest PostgreSQL version. This occurs during sending a mail by the service and is fixed now.

162999 - App Fax: PBX Manager Plugin External Resources

The existing external resources are not completly available in the selection. This is fixed now.

163164 - App Platform Manager: check shared library existence on App installation

To prevent uploading of Apps which are linked to libraries which do not exist on the system, the manager now checks all linked shared libraries before the install.

163832 - App Platform Manager: fixed backup download in native clients

The backup download was not started in native clients.

162904 - App Platform Manager: fixed database reconnect if database server isn't available longer than 9s

The reconnect mechanism was broken if the database server was not available longer than 9s as another timeout interrupted the mechanism.

162902 - App Platform Manager: preparation for PostgreSQL 16 compatibility

PostgreSQL 16 changed the way how to switch from standby to primary mode on a replication server.

​This change ensures compatibility with both PostgreSQL 14 and 16.

159470 - App Switchboard: Disable autostart softphone

By default the softphone is autostarted if the device is selected on the hamburger menu. A new setting stored on the browser can disable the autostart.

161508 - App Switchboard: When a call is rejected with "User busy" it could not be removed from the UI with disconnect

If a call is rejected with "User busy", then it could not be removed from the UI when the agent clicks on the disconnect button.

162839 - App Switchboard: With "Operator connect for SOAP" selected connected calls where not removed from the Queues section

If "Operator connect for SOAP" was selected on the WQ configuration, the calls were not removed from the "In the waiting queue" container because the "CallInfo" message with delete is not sent if the call is connected by another agent.

162771 - App Working Manager: Target monthly hours wrong with non-integer values

If the daily target hours values are a non-interger, the target monthly hours values are wrong.

162236 - App Yealink: Provisioning user changes not shown on UI

When the provisioning user/password were edited on the hamburger menu the old value was displayed on the input field after saving the changes.

162934 - Firmware OAuth2: support custom https port

The redirect URI didn't contain a non standard https port.

162619 - innovaphone myApps Connector for Microsoft 365: Long Pbx calls could not be synchronized to teams over the time

PBX calls which are longer than 15 minutes could not synchronized with teams over the time. The first 10 minutes Teams will show you InACall but after that it can happen that teams show you the last presence which was configured.

162249 - IPxx11: modify linux kernel upload for 6.x.x kernels

the compressed linux kernel is now loaded to a higher address in linux RAM area. This speeds up  kernel start a little bit because the kernel must not shift itself to a higher address before uncompress .

 

163151 - IPxx11: Tracing must not be stopped after a reboot command

After a reset triggered by a reboot command tracing was stopped and the real reset reason had to be discovered in the trace text.

​Now tracing is not stopped anymore and the reset reason is explicitely noted:

reset-source=WATCHDOG(2) triggered by reboot command

164270 - PBX empty filter overwriting template could get lost

e.g. by myApps Login/Logout

161969 - PBX: For CFx configuration 32 numbers to filter for should be possible

All CF configured disappeared from UI if more then between 10 or 20 numbers were entered

164268 - PBX: Wrong handling of reroute loop

The rerouting call should be disconnected, not the calling. Result is the same except, if the call was sent to multiple destinations

165335 - Push: Exponential backoff for connection retry

from 10s to 42min

162203 - SIP: Wrong ACK message was sent

​Outbound INVITE without SDP:

When receiving a re-transmission of 200/OK an ACK without SDP was sent in some cases.

161788 - Softphone-App: Do not allow to answer incoming call while initiating an outbound call

Do not allow to answer incoming call while initiating an outbound call

161624 - Softphone-App: Ringback tone stops if inbound call is received

Ringback tone of outbound call stops if another inbound call is received.

161178 - TechAssist: Add test if Linux is enabled but not used

The test checks if the App-Platform support is enabled but not installed to prevent unnecessary memory usage

164530 - TechAssist: XML Parser not work on self closing closing tags without childs

It happens for example if WH2/WiFi Phones in the PBX registration are parsed.

13r3 Service Release 16 (137962)

168887 - Do not adjust CGPN according to node prefixes

Collateral damage from 151026 - PBX: Use Node prefixes to adjust called party number

167005 - Fast Renegotiations one after the other could fail

Happend on transfer to a conference

163566 - IP-DECT: Lower user rights for adding unassigned handsets

Now, all user admin rights except of cf group only are accepted for adding unassigned handsets to the system. Previously, the user admin right full was necessary.

168479 - IP1x2 USB Headsets: support Yealink BTD51, Jabra Link 390

These bluetooth dongles require special handling when directly connected to the root port of a IP1x2 phone. On phones with a HUB (IP2x2, IP222A) this is done in the HUB.

167520 - IP240A: trap with pickup key and braodcast group

In a special constellation of pickup key and call braadcast group a trap happened when the phone received and accepted  a call via the broadcast group and another call to the  the broadcast group  was indicated to the phone.

167161 - IPxx11: Trap when starting LinuxApplication Platform V10

The Linux V4 kernels did not start and this resulted in a trap. This is fixed now.

165943 - IPxx13: limit time to wait for start of secondary CPUs

A watchdog assertion was raised when the start of  secondary CPU  failed. Now an error is logged when the  CPU did not start within 5 seconds

165042 - IPxx13: prevent trap when reading crash dumps from flash

The IPxx13 stores up to 5 trap dumps which can be read by "!mod cmd CPU crash-load [/resolve-names][dump-number]" .  "/resolve-names" requests resolving of event and object names  for dumps created by the currently running firmware.

In rare cases this may trap and thus it isn't done by default anymore.

163953 - IPxx13: Tracing must not be stopped after a reboot command

When an IPxx13  was restarted after a reboot command tracing was stopped. 

 ​Now the reboot command is handled like a normal reset command, trace is started and the last line of a trace taken shows:  

reset-source=WATCHDOG(2)   triggered by reboot command

166614 - myApps Windows: allow longer titles in certain notifications

E.g. missed call notifications can now have titles with up to 3 lines which allows longer display names of the caller.

163952 - Phone USB Headsets: additional Product ID for Jabra Link 400

For the  Jabra Link 400 USB Dect Dongle an alternative  product ID was  reported. The ID is added to the whitelist now. 

168485 - phone USB Headsets: support Jabra EVOLVE2 40 SE

add support for the Jabra Evolve2 40 SE Mono & Stereo headsets

166651 - Phone USB Headsets: additional Product ID 1136 for Jabra Link 400

The third product ID for the Jabra Link 400 dongle seen in the field is added to the whitelist. No functional changes required.

167924 - Phone USB Headsets: support EPOS IMPACT 760T , IMPACT 860T

add support for the EPOS IMPACT 760T & 860T headsets

167632 - Reverse-Proxy: Add Via header to outbound ACK (SIP)

Reverse-Proxy must add Via header also to ACK message as for any other outbound requests.

164336 - Search API (Users Service): Wrong extension if search string contains more than 3 words

The query when the search string contains more than 2 words was different to the ones applied when the search string contained only 1 or 2 words.

168480 - SIP-Provider Profile CH-Backbone_Solutions_AG-sipcall_SIP_Trunk

- Update SIP Profile

167001 - SIP-Provider Profile DE-Deutsche_Telekom-CompanyFlex_TLS

Update SIP Profile - Add CDPN-Out map for 11xx short numbers.

163967 - SIP-Provider Profile ES-Sewan-Trunk_SIP

- New SIP Profile for ES-Sewan-Trunk_SIP

166163 - SIP-Provider Profile IT-KONVERTO-SIP_Trunk

New SIP Profile

167809 - SIP: Fix for out of memory condition

Unexpected restart (Out Of Memory) due to inbound INVITE transactions accumulated over time.

167316 - SIP: Fix for registration problem

Fix for registration problem when switching between primary and secondary server. Esp. when receiving 301 redirect response from server.

161574 - SIP: New advanced option /installed-certificate

New interop-tweak /installed-certificate

C​an be used to use user-installed certificate for TLS.

167026 - SIP: Support for P-RTP-Stat header

Read P-RTP-Stat header from BYE request.

167002 - Softphone-App: Longer timeout on directory search

Do not cancel directory search after 2,5 seconds.

​Display spinner while search is ongoing.

167978 - Web1: New library for parsing presence notes

Location: web1/presence/innovaphone.presence.js

The library can be used to generate a translated string for a (calendar) presence containing hashtags.

13r3 Service Release 17 (137969)

170226 - add 'debug' option to 'mem' and 'buf' command

the mem/buf commans without any option returned the current memory/buffer statistics to caller and wrote them also to the trace buffer. Now writing to the debug buffer must be explicitely requested with the debug option, i.e. !mem debug  must be used instead of  !mem.    

169533 - App Platform Manager: fixed replication fallback in certain scenarios

A replication fallback from standby to non standby mode might not have worked in some cases (not clear how these cases where triggered at all).

168886 - App Profile: An empty privacy filter should delete it from the PBX

If the user edits the name of the privacy filter and saves it empty, it should be removed from the PBX.

168923 - App Profile: Crash if TestFilter (PbxAdminApi) was sent when the connection was broken

If the app is restarting and the PBX connection is broken, TestFilter should not be sent, otherwise a  Segmentation fault will crash the app service.

171002 - App Voicemail: Avoid encoded slashes in the audio url

Now it will be only user and filename url-encoded to avoid some firewall issues.

171860 - IPVA: option to limit size of virtual flash disk

By default the size of virtual flash memory is derived from the size of the associated virtual hard disk up to a maximum of 512 MB . 

With !config add CPU /smallflash the maximum size of the virtual flash memory is defined as follows: 64 MB for DRAM > 265  MB, 32 MB otherwise .

171933 - Phone USB Headsets: support Yealink WH66 and WH67 DECT stations

support the Yealink DECT stations WH66 and WH67

169776 - Phones: Do-Not-Disturb did not work on background users

Presence dependent DND only worked for the foreground user.

​Presence of background users was not monitored.

168939 - Push for chat could contain HTML entities

Something like &nbsp;

167018 - RCC 32bit handles instead of 16bit

Under some special conditions we could run out of handles and this can cause a restart

168994 - Restructure HID driver

Internal code change, no new functionality.

171554 - Signaling: null wrongly removed after 992 country code

Country code 992 from Tajikistan allows telephone numbers with a null after the country code.

​00099200445566

171938 - SIP: Fix for unexpected restart

SDP with too many m-lines causes crash.

168301 - SIP: Sometimes no RTP was sent

No RTP was sent if SDP offer was received where SAVP contains a zero-port.

170692 - Softphone-App: Fix for search spinner

Search spinner introduced with fix #167002 could be stuck on display when search input field was cleared during search.

171885 - Softphone-App: Normalize phone number when activating call diversion

Remove decorations otherwise decorated numbers would be handled as names.

13r3 Service Release 18 (137975)

175244 - App Platform Manager: reboot directly on App Platform update

A reboot is now automatically enforced if the update has finished.

174515 - App Switchboard Admin: Add DNS check in case of stand-by connections

If there is a DNS configured on the Admin app, it will be checked to select the PBX connection, if not only the PBX name will be checked. Needed to avoid the stand-by PBX connection.

173057 - IPxx13: let reboot command force a hard reset

the normal reset commands perform a software restart of the OS to keep the RAM intact over the reset.

A hard reset is more similar to a power cycle where.  RAM and all other hardware are reset.

169810 - myApps for Windows: Docking setting could block myApps

Windows API Function SetWindowLong needed by docking was  called in the main thread blocking myApps in some rare situations.

Docking is now executed outside of the main thread.

171245 - myApps for Windows: missed notification not shown if call waiting is deactivated

13r3, 14r1 and 14r2

​After Beta3 and SRs

173825 - phone ip1x2 USB headsets: make Plantronics APU72, Snom A330/C300 working again

The abovementioned headsets are the only USB 1.1 devices among the ~150 supported headsets and mistakenly not accepted anymore (USB-DEVICE ... USB 1.x not supported).

172778 - phone USB headsets: adjust silence samples provided by headset microphone

Unusual samples sent by some headsets in case of silence result in slight noise at the receiver.

​These samples are replaced now.

172311 - SIP-Provider Profile DE-NetCologne-SIP_Premium

Profile Update

13r3 Service Release 19 (137980)

176564 - App Recordings: Time filter does not include recordings from last 2 hours of a day

A filter which covers a whole day does not include all items. Recordings made within the last two hours were missed. This is fixed now.

175588 - ICommand: fixed possible crash on reading error output

If an error occurred during reading the error output, a crash occurred.

This can affect e.g. the App Platform Manager or Apps which use the ICommand class.

176105 - PBX: Outgoing registrations from Gatway object with host name

Not only with IP address

176365 - phone USB headsets: support Jabra EVOLVE2 50, ENGAGE 50 II, SPEAK2 55, SPEAK2 75

Add support for Jabra EVOLVE2 50 and  ENGAGE 50 II headsets and for SPEAK2 55 and SPEAK2 75 speakerphones .

176511 - Phones: Add ETH0/LLDP tab to advanced GUI

Permit LLDP configuration and provide LLDP state information via advanced GUI.

164102 - Techassist: New Test: Enabled pcap to url on gws/phones

Checks for enabled pcap to url on gateways and devices

164103 - Techassist: New Test: Enabled rpcap on gws/phones

Checks for enabled rpcap on gateways and devices

164100 - Techassist: New Test: Enabled tracing on gws/phones

Checks for trace flags enabled on gateways and devices

13r3 Service Release 20 (137985)

178320 - App Calendar: Potential endless loop during name resolving

An endless loop can occur during name resolving. This is now fixed.

178070 - App Recordings: Long loading time in GUI with large databases

When a recordings DB exceeds a couple of gigabyte, the loading and response time of the user and admin app GUI displaying the list of recordings takes a long time. This is now improved.

177541 - Fix for non-working H.323/TLS registrations

Sporadically after an update some phones did not register anymore using H323/TLS. This was because the PBX acceped the TLS session before the system time was set and issued a TLS ticket telling that the certificate was not trusted. If the ticket was renewed after the system time was set, the problem was persistent and could not be resolved by a reboot.

With this fix H323/TLS sessions are never accepted before the system time is set.

Note: This requires system time on all PBXes for accepting H323/TLS registration.

178197 - myApps client: 0 was not removed from number in missed call notifications

Missed call notifications displayed an additional 0 for external calls which were rejected with busy.

This number could not be dialed as the missed call notification was clicked.

177778 - PBX: Export config as XML caused restart

In case of too many Apps

178156 - PBX: Fax not working with active standby PBX

If the standby PBX goes in the active state, the PBX fax objects do not register to the fax app service and fax does not work. This is now fixed.

177832 - PBX: Invalid XML on SOAP UUI updates

In the UUI sent with SOAP all characters, which are not compatible with XML content are url encoded. This are characters <0x20, >0x7f, '<' and '>'.

This means the UUI content in SOAP remains compatible as long as it was valid XML

178651 - Phones: Updated display font for non-latin languages

Improved quality for cyrillic or greece texts.

This concerns all phones with color displays.

178397 - SIP/H.323 interworking: Selection of the DTMF with correct rate did not work all the time

For a call with G.711, Opus, DTMF 8000Hz, DTMF 16000Hz the combination of G.711 and DTMF 16000Hz was selected which does not work. It is now only possible to select G.711 with DTMF 8000Hz or Opus with DTMF 16000Hz.

13r3 Service Release 21

178750 - PBX: Debug information for active calls of a user

To be able to check if there is a hanging call

176913 - Signaling: call automatically connected after REQUEST message

REQUEST message has triggered a "conn" message with a Proposal but this was wrong as the user has not connected the call.

This Request should trigger ICE gathering but the Proposal must be sent when the user connects the call.

Main improvements in 13r3

124819 - App Calendar: Presence mapping

Presence can be mapped to an other value (e. G. out of office to free)

136202 - App Calendar: Priotization of appointments based on title

For presence mapping, appointments in the calendar can be priortized based on words occurring in the title.

122826 - App Contacts: Personal Directories and Edit Functionality

Users can maintain personal directories for contact entries.

Contacts are editable: add, modify, delete.

Visibility of directories is administratable to be globally visible or visible only to specific users or groups.

124582 - App Devices: new expert configuration

The expert configuration allows to configure an update script.

More information can be found here:

Reference13r3:Concept_App_Service_Devices#Expert_configuration

131355 - App Fax improvements

There are new features for the innovaphone App Fax:

• Node support:

PBX fax objects can be in nodes and the user's node number is included.

• Fax resource of other objects:

Other PBX fax objects can provide the registered fax resource to other fax objects.

• Transmission report:

A notification or a transmission report in PDF is sent by mail for a successfully transmitted document.

• Error notifications:

If a document can not be sent, a notification is sent by mail.

• Translated email texts:

The email texts are translated to the user's language.

• Customized email texts with variables:

The configured email texts can include variables which are substituted with document information.

• All fax object registrations:

All fax object registrations are used as fax resource. If one is used and no channel is available, the next registration is tried.

• Automatic deletion:

Fax documents can be deleted by the app service after a configured time.

• Number decorations:

Number decorations in the search field inserted by users or in found contact numbers by search providers are removed.

131219 - App focus in myApps

With the "app focus" you can make any app your default view.

• The app will be shown automatically when starting myApps.
• Closing any other app will return to the focus app.
• The header of the focus app contains your own presence, like on the home screen.

Usage:

• There is a new "focus area" in the start bar of myApps. Drag the icon of a running app into the focus area to bring it into focus. Drag it out again to return to the normal behaviour.
• In the hamburger menu of myApps you can disable the app focus function if you don't need it.

119721 - App Platform replication

• One or multiple standby servers can be configured for a primary server.
• Standby servers are just readonly.
• Just the same system architecture can be used for replication (e.g. arm/arm, x86_64/x86_64 etc.)
• The failover must be triggered manually. There is no automatic failover mechanism.

119885 - App Store: new configurations for apps and download site

Now it is possible to configure on the apps:

• descriptions with translatios for the app service
• the list of available apps with descriptions and translations
• requirements to run the app service with translations
• do not allow to edit cascaded apps (only editable from the source store)

These new informations are also available on the download site.

The footer links on the download site can be also now configured on the app hamburger menu.

124826 - Badge count on Conference App

The icon of the app shows a badge count indicating the number of participants.

134957 - Better support for third party phones

• Recommended configuration with media relay
• Optional support of TURN
• No ICE/DTLS required from phone

Reference13r3:Concept_Third_Party_Phones

119787 - Call forwardings depending on myApps online state

Call forwardings can now be configured depending on the myApps online state.

The feature can be switched on or off by the user in the Profile app.

120182 - Conference Web Access

Now it is possible to generate an access link in the conference app. An external person can take part in a conference call with this link with a supported browser.
A conference room can be generally accessed  or a terminable meeting link for a temporary room can be created.

A STUN/TURN server must be available and the firewall of the client must allow the conntection to use this feature.

119724 - Meeting invitations

A conference web access link can be generated in the conference app for a terminable meeting in an extra conference room. This temporary room is also accessable by the generated SIP address.

135942 - myApps and Softphone redundancy

A failover mechanism for standby cases has been added to myApps.

Details: Reference13r3:Concept_myApps_Redundancy

A similiar failover mechanism has been added for Softphone registrations. Additionally we added support for the physical location.

Details: Reference13r3:Concept_Softphone_Redundancy

120420 - myApps Android: Added Video App Sharing

App Sharing support for Android smartphones and tablets.

134101 - myApps: Windows authentication using OAuth2

myApps users can now sign-in using OAuth2 / OpenID Connect. We support Active Directory Federation Services (AD FS) as an ID provider.

Details: Reference13r3:Concept_OAuth2_Windows_Authentication

121845 - New App: Connector for kuando®

With the app, your current line state will be synced from 3rd party platforms (MS Teams, Zoom, Skype, Webex, ...) to innovaphone. Furthermore, you can connect a USB Busylight to show colleagues in your vicinity or in the family's home office whether you are currently available or busy. 

Details: Reference13r3:Concept_App_Service_Connector_for_kuando®

131887 - New App: innovaphone myApps Connector for Microsoft 365

• The innovaphone myApps Connector for Microsoft 365 synchronises the Teams presence and call status of Teams users with the innovaphone PBX.
• Details: Reference13r3:Concept_App_Service_Connector_for_Microsoft_365

120102 - New config option "Hide own number"

Can be found in Softphone-App's config screen.

If enabled calls are initiated with CLIR (Calling Line Identification Restricted).

127109 - Pin apps to myApps main window

We added the possibility for the user to pin apps to the main main window of myApps.

• Pinned apps are started automatically by the myApps client.
• They are always running and can't be closed.
• The setting is stored per-client per-user. So users can pin different apps on different instances.
  

124827 - Search for conference rooms

The conference object now comes with a search provider for conference rooms. It can be used to search for rooms by name in other apps like phone and softphone.

134114 - Softphone Recording

The new Softphone App in combination with the launcher (windows,android,macos,ios) is now capable of audio recording. Within the app you can choose between:

• Recording is by default on/off - if you want to record all calls as soon as you start them or not.
• Record external calls only - if you only want to record external calls only

Independent of these default settings the user can manually turn on/off the recording during the call (if the admin sets the appropriate permissions) with a new switch inside of the media panel. 

The administrator can also set the default settings inside of the PBX and can decide if the user should be able to change them or not.

Furthermore the recordings app was improved. It is now possible to download the audio file as well as a PDF file containing the call flow.

122059 - Softphone2 and Multi-Video-UI

The Softphone App in 13r1 or 13r2 versions was implemented in Javascript and ran entirely on the browsers. That means a running UI was needed to establish a connection to the PBX and to start and receive calls.

A new C++ signaling module has been developed in 13r3 for the native clients which establishes the registration to the PBX and handles signaling messages for the calls. Main advantages of this solution:

• Calls are signaled to the user even if the UI is not opened (important in mobile environment to present the call faster to the user)
• Calls are not terminated if the UI is closed (important in Teams environments)

A general rework of the Sofphone UI was also done to support Multi-Video UI like in the Conference Web Access environment.

And some features presented in the old myPBX or deskphones will be available in the new Softphone2.

118458 - Support for TLS 1.3

All boxes now support TLS 1.3.

134537 - TEXT-Interface

A new Interface for the transcription of audio to text

Other improvements in 13r3

131351 - add counter of frames received in ethernet driver

To see which of the frames counted in hardware are really passed to the driver the "Rx Frame Total" counter is added 

122472 - Added !mem info pbx_appclient_presence

For internal debugging purposes.

119439 - Added readonly TaskInitConfig for Config library

This is needed for apps in standby operation, when the database is readonly.

120362 - AP Manager App Store: Fix installed apps display

When an app is installed, it should be displayed under the right manufacturer section

119491 - AP Manager/App Devices: prevent endless loop on parsing incomplete JSON array item

If the first found array item is directly incomplete, the decoding buffer is too small.

124595 - AP Manager: Add platform architecture to app compatibility check

• Check platform architecture along side release and image version.
  

123141 - AP Manager: Add progress callback for stopped statistics

• Wait for the statistics tasks to stop to avoid an illegal delete on Service/Instance stop.
  
• Relevant for service/instance statistics
  

131207 - AP Manager: check SMTP server value before sending mails

Otherwise an empty server might lead to a crash.

119270 - AP Manager: create alarm/events on vacuumdb/backup failures

If vacuumdb fails, an alarm is now raised, as this may indicate database corruption.

If a scheduled database backup fails, an event is sent, as this may also indicate database corruption (or HTTP server is unavailable etc.)

120957 - AP Manager: do not send update messages while sessions are not yet authenticated

The AP Manager sends update messages over sessions and these were sometimes sent during the App Websocket authentication handshake which caused a connection close.

122636 - AP Manager: Dynamic creation of temp file/working folder of an instance

• Not saved in database anymore

124651 - AP Manager: fix database enum/function ownership of restored backups

The ownership of enums and functions was wrong (postgres) after a restore of an instance.

The ownership is now fixed on first startup of the AP Manager once and during the restore process too.

123855 - AP Manager: fixed possible traps in ramdisk and if database connection is down

Most GET/POST/WEBSOCKET requests must be cancelled within Ramdisk and if there is no database connection, otherwise a trap may happen.

120317 - AP Manager: new configuration "Default URL"

Possibility to configure a default URL to which the webserver redirects if just IP/DNS of AP are used.

120195 - AP Manager: shutdown system completely on ARM64

An IPx13 gateway itself recognizes such a shutdown and can stop the CPU in this case.

114500 - AP Manager: write app service information to trace files

A downloaded trace file now contains version, uptime etc. of the app service.

The archive with all trace files contains a file apps.txt inside /var/log/apps with this information with all app services.

114215 - AP Webserver: fixed handling of socket shutdown from peer (e.g. needed for syslog usage)

A peer socket shutdown ran into TCP timeout until this change, as it wasn't notified.

118689 - App Contacts: Company Name with Plus,Ampersand Character weren't searchable

Characters '+', '&' shouldn't be treated as stop-characters when parsing a company name.

118278 - App Contacts: Considering 'Company' for 'CN'-Synthesis

Attribute 'cn' is going to be auto-synthesized from 'sn', 'givenName', 'company' (new)

118737 - App Contacts: Normalization of Area Code failed

A function to remove a surplus '0' from an area code didn't work properly.

114914 - App Contacts: Share by Email, Indenting by ": <space>"

was by <tabulator>

119098 - App Devices: added support for "No physical location" flag in FXS and PHONE configurations

The flag "no physical location" can now be used in FXS and PHONE configurations.

126111 - App Devices: fixed possible crash during shutdown of the App

If a rental update is canceled by a shutdown, the Devices App might have crashed.

119657 - App Devices: open AP Managers with language argument

To have the client language inside AP Managers opened through Devices too.

117327 - App Devices: prepare for app stores with many apps when requesting apps

The response message on querying an app store is now split into multiple messages to support app stores with a larger amount of apps.

112282 - App Devices: retry update jobs with failed updates

An update job is now retried twice if updates failed.

The retry is done 10 minutes after the update job finished previously.

101576 - App Devices: show conflicting device configuration on overlapping categories in error message

The error message on such a conflict now contains the description and category of the conflicting device configuration.

118042 - App Devices: websocket message RemoveDevice now requires domainId property

This ensures that a device can be just removed from a domain where the current websocket session has access to.

125242 - App Events: possibility to show raw XML data of events

Sometimes the XML contains more data than shown. This adds the possibility to show the whole XML.

119380 - App Profile: Crash if domain was not sent on ReadUser

The Users Service crashed when a ReadUser JSON was sent without the domain parameter.

119354 - App Profile: Email address can be modified on websocket message even when it is not allowed on the UI

The email in the Profile App can be changed by directly modifying the WebSockets communication, although this action cannot be carried out in the interface.

115522 - App Reporting: speed up reporting query

Changed the query to be faster under certain conditions (which are unclear).

117783 - App Store App: Read-only fields for 3rd party apps

When an app has been cascacaded from another source App Store (3rd-party app) the data fields are read only. So it can only be modified from the source App Store and it will be updated when a new version is updated.

117738 - App Store: Added requirements field to the apps

The requirements text field has been added for the apps. This can also be translated like the descriptions and obtained with .../download?requirement=appid&lang=en

Also a boolean "requirement" has been added to the JSON to indicate if requirements have been set.

110136 - App Store: Allow to edit the devices array on linux.json

Until how the devices array was not editable. When adding a new App Platform we need to be able to change it on the UI.

120026 - App Store: App binaries should also be found if the name is not the one defined on the app object

If the manual upload was used, the binary name could be anything. The id_files files file is generated automatically but by default on the UI the content of this file was not checked and the binary name defined on the app object was the one that was looked for on the DB.

116832 - App Store: Changes on release/build/label labels

Now the given labels have been updated:

Release -> Major release version

Build -> Build number

Label -> Release state

Also when adding a new app a preview of the version is displayed. For example: 

13r3 136001 [dvl]

117350 - App Store: Display descriptions translations

Now translations for the descriptions of the apps and the app service can be configured on the App Store. They must be displayed already translated on the app and the download page. English is the default language.

116751 - App Store: Display the right terms and conditions URL depending on the language

Now the Terms and confitions URL for the innovaphone apps changes depending on the language.

118644 - App Store: Download ZIP package not finishing

DB error due to the last changes to add the requirement field.

118643 - App Store: fixed sporadic crashes on file upload

When uploading a file to the DB, HTTPClientRecvCanceled was being called where a buffer was freed, which was part of the received buffer. This generated an double free of the received buffer on HTTPClientShutdown.

120958 - App Store: Store the allapps, allfirmware, allsoftware and alllinux jsons on DB

To reduce load and open the download site faster, the JSON with all the versions is stored on the DB so it is not generated dynamically anymore but just updated whenever there are any changes (as it is done for example with apps.json).

118841 - App Store: Wrong sorting of App Platform versions on download page

The newest version should be first.

136528 - App Switchboard: Add title to BLF undocked window

The URL was displayed insted of a title. Now "Switchboard BLF" is displayed.

115933 - App Switchboard: Allow to expand user details on BLF and Favorites

Now the popup to expand the user details can be also displayed for BLF users and phone favorites.

115477 - App Switchboard: Allow to transfer a call to searched results and favorites with drag&drop

Dragging a call from the calls container and dropping it over a phone favorite and a searched user, transfers the call to the given user. Same logic as with the users in the BLF.

131925 - App Switchboard: BLF groups not sorted right with drag & drop

The dragged and dropped over groups were switching the order instead of inserting de group after it.

124267 - App Switchboard: BLF problems with usernames with comma

When a username contains a comma, the user may be displayed wrong on the BLF. Now the information of the BLF users is stored URI encoded on the DB.

116338 - App Switchboard: Display info if the call is released because the user is busy

An error message is displayed and the call is removed from the UI only when the user clicks on disconnect.

133680 - App Switchboard: Logging in/out of a WQ many times, displayed duplicated calls

If an user logs in and out of a WQ several times, then a single WQ call is displayed many times. This is because the UserInitialize message has been sent everytime the groups configuration changes.

131293 - App Switchboard: Only shows the last redirection information

The information displayed should be the same as on the phone app. leg2orig was being ignored by the app.

131092 - App Switchboard: Remove localAPI from Impersonation to allow Session Multiplexing

The localAPI must be removed so that the Session Multiplexing works again on 13r3 Switchboard. Now a new --innovaphone-impersonation JSON API is used to manage the favorites monitoring instead of using the general --innovaphone-queues.

127269 - App Switchboard: Results from Contacts didn't match

The UI display could fail for Busy lamp field field entries originating from App Contacts. 

#changed innovaphone-switchboard-prototypes.js

122728 - App Users/Search API: Deliver the relative number with escapes

Until now on App Users and on the Search API only the extension was delivered. This cannot be used to call if the logged in user and the delivered user are not on the same node. Now the relative number with escapes is delivered and can be used to directly start a call.

128833 - App Users: Added support for multiple provisioning provider

The Users Admin App and Profile App supports now multiple provisioning provider.

114643 - App Users: Password Reset - Phishing attack protection

- Set a random key for every password reset try. If when clicking on the email link this key does not match with the one on the DB the password will not be changed.

- The loc parameter to redirect to the confirm page is not sent anymore with the email. It will be managed inside the app service.

- The new password is saved on a new DB column and will only replace the old one when the link is clicked. So the new password will not be sent with the email.

- As the key and the new password are deleted from the DB when the link is clicked, if the user clicks twice then nothing will happen.

124398 - App UsersAdmin: Add dn to XML import

It was missing from the list of parsed parameters.

131189 - App UsersAdmin: Add extension to the provisioning CSV export file

When replacing old telecommunications systems, only the extension number is displayed on the terminals. In order to improve the rollout of the Innovaphone devices, the phone number has been added on the CSV provisioning export file, so it will include: provisioning code, username, cn and extension.

118006 - App UsersAdmin: Add hint when provisioning a Yealink phone

Added a label next to the input field to show that the MAC must be entered there.

130657 - App UsersAdmin: App Service crash with wrong CSV file

A CSV import file with the wrong format may crash de app service. The import tried to add an empty user to the DB and the service crashed during the replication.

131871 - App UsersAdmin: Import CSV was ignoring device/name

So the name of the device was not added.

121325 - App UsersAdmin: Provisioning with many PBXs, nodes or templates is not user friendly

When provisioning on UsersAdmin if there are many many PBXs, Nodes or Config Templates the menu to filter users was not very user-friendly. 

- Add scrollbar to the filters list

- Sort the items alphabetically

- Add searchbar to the filters to look for a certain PBX, Node or Template

117532 - App Yealink: Allow to define admin username and password

If an admin username and password are set on the config tab, these will be added to the configuration file.

133946 - Appclient: Add test-id's for automated testing

Add test-id's to Appclient for automated testing.

114642 - Avoid repeated ICE gathering

PBX may restart the media-negotiation (e.g. when calling to a user with multiple devices). Results in short period of no-audio after connect.

131908 - Calendar: Make new way to resolve names optional for compatibility reasons

Allowes to use the impersonation user for name resolving (faster but depending on the configuration maybe throw an error), or the various user names the calendar can create with the information received from the PBX (possible slower).

124161 - Chat:Better handling of connection loss

For example if the PC/Smartphone goes into deep sleep

111650 - CONF: No video-only calls possible to busy interface/room

This is fixed now.

135250 - Conference-Web-Access: Fix for iPhone

On Apple iPhones all video players automatically go to full-screen mode, if not forced to play inline.

116085 - Conference-Web-Access: Videos after websocket reconnect

Sometimes wrong videos displayed after re-entering conference room (after websocket got lost).

119540 - Contacts: ASSERTION triggered

An ASSERTION triggered within LDAP handling

LdapSession::Rx_LdapNotImplemented (this=this@entry=0x3321e9a0, op=op@entry=0x33208b70) at contacts/contacts_ldap.cpp:506

119442 - Discard corrupt VARs

The admin could create VARs with a name, which was longer then the used buffer. The check for this was insufficient.

This is already fixed. But VARs created before this fix could lead to an unexpected restart. These VARs with a name, which is too long are now discarded.

134562 - Display "JSON" as protocol in PBX calls view

Display "JSON" as protocol in PBX calls view instead of "WebRTC".

124160 - Don't store Chat messages sent inside Media Calls

Chat inside a media call is considert volatile, so it should not be stored. This is esspecially true for chats within a conference

115697 - Emojis selection only if editor has focus

Otherwise not clear where emojis are inserted

119510 - Extend CF on precence by option to execute CFNR if offline

Use myApps online status for this

132285 - Firmware: fixed leak on too early TCP connections

If a TCP connection was triggered too early after a reboot, the socket connect caused a leak.

118455 - Fix chunked decoding for Json data

Is used at several places. SDK documentation updated to explain chunked decoding

126706 - Fix for hold via RCC/SOAP

"UserHold" and "UserRetrieve" via RCC-API or SOAP-API is handled in PBX.

The controlled endpoint is not aware of that actions and goes out of sync.

131816 - Fix for styling of innovaphone.ui1.Switch

Arguments 'height' and 'width' expect strings (e.g. "15px"), not integer values.

128799 - fix garbled error message in advanced UI IP4/ETHx/IP

an arbitrary string could be displayed instead of an error message. 

111776 - Fixed a crash with enabled logging in postgresql implementation with a race condition

Could just happen with an active transaction and another user triggering a query and enabled database logging.

118779 - Fixed displayed numbers on several call-diversion scenarios with concentrator PBX

New feature "No Prefix Number" for Gateway object.

130534 - Fixed opening of Devices with URL arguments

Devices ignored given URL arguments.

114698 - Fixing button's tooltip

Fixing tooltip text of call-buttons.

122953 - Gateway: Set error log when rejecting call due to license issue

If Gateway application rejects a call, an error log will be added now: "Missing channel license"

Code 0x00010004

117084 - Gateway: Support UUI's longer than 127 bytes

UUI configured on a Gateway route is truncated to 127 bytes maximum.

HTTP-URLs to app platform are often longer and do not work due to truncation.

134717 - Give color to side-buttons

Give accent color to side-buttons if they are active (panels are pulled).

123397 - H.323 federation: Only SRV query for destination of call

No A or AAAA query

133947 - Handling of "ct_complete"

Das Backend bekommt von der PBX ein "fty":[{"type":"ct_complete","remote":{"num":"00049703173009670"},"remote_name":""}]

und muss das an das Frontend durchreichen.

134150 - Hide Chat button if chat is not available

If no provider of Chat-API can be found, the Chat button is not displayed on fav-items and recent-contacts.

134356 - ICE: Accept binding reponses without fingerprint

The ice-lite implementation of Cisco CUBE sends BINDING_RESPONSE messages without the FINGERPRINT attribute, during connectivity checks.

Our implementation checked the presence of the FINGERPRINT according to RFC8445 that tells "The fingerprint mechanism MUST be used for connectivity checks" and rejected those binding responses.

After the fix, we accept binding responses without the FINGERPRINT attribute for compatibility reasons.

133997 - Improve UI for very narrow display

Down to 320 horizontal pixels.

130160 - IP29-20: start all TEL interfaces when PoE+ is indicated via LLDP

The interfaces TEL9...TEL20 started only when PoE+ was detected by ethernet hardware at boot time. Now they are also started when PoE+ is indicated via LLDP later

108307 - ip6013 - simplified set_level(), reduced irq backlog

set GIC priority level directly in set_level(), an extra function call is not required. don't save hppir, contains no usable info.

108933 - ip6013: support 2 ethernet ports on evaluation board

to run IP6013 tests also on the LS1046AFRWY evaluation board both ethernet interfaces must work there

108370 - ipxx11/ip29-20, ip2x2: set LLDP power request according to device type

some switches don't provide enough power over ethernet when the power request is too low. 

121323 - ipxx11: enable/disable use of neon operations in crypt functions

use of neon operations can be enabled/disabled by setting  ARMV7_CRYPT to 1 or 0 in ip311.mak

122007 - IPxx13 AppPlatform: stop Linux CPUs automatically on PSCI_SYSTEM_OFF indication

On receipt of a "Shutdown" request the  AP-Manager terminates linux  with a "poweroff" command which finally triggers a PSCI_SYSTEM_OFF event.

The host  CPU intercepts this event and stops the Linux CPUs.

117698 - IPxx13: app_platform support for linux kernel 5.10.78

the new kernel must be loaded at offset 0 and not at fixed offset 0x80000 from dram base

118848 - IPxx13: prevent corruption of trace buffer

reduce the probability of overriding of parts of the trace buffer by a firmware bug

118702 - IPxx13: write trap info to serial port first

a trap in _lock_linux() called by trap handler caused a trap loop without leaving back any usable info.

Now trap info is printed to serial port first and _lock_linux() is called before saving the debug info in debug buffer.  when _lock_linux() is  called by trap handler it doesn't write to debug buffer anymore.  

119874 - LDAP Control to pass User Context

An LDAP control is added to allow passing user context within LDAP searches. Envisaged informations are a user's: sip/name, active group-memberships.

#changed pbx/main/pbx.cpp

#changed interface/reverse_lookup_if.cpp, reverse_lookup_if.h

#changed service/reverse_lookup/reverse_lookup.h, reverse_lookup_ldap.cpp, reverse_lookup_ldap.h, reverse_lookup.cpp

#changed interface/ldapapi.h

#changed service/ldap/ldapasn1.h, ldaplib.cpp

#changed contacts/contacts/dirlib/ldapcoder.cpp,ldapasn1.h,ldapcoder.cpp,ldapcoder.h

#changed contacts/contacts/contacts_ldap.cpp

124943 - LDAP object: Harmonize number of search results with Users and Contacts

The LDAP object gave up to 20 results.

Now it gives up to 25 results as Users and Contacts do.

129696 - LLDP configuration via advanced GUI

To overcome PoE+ problems with certain switches LLDP needs to be configured for example to omit PoE+ negotiation via LLDP at all or to omit some PoE+ or VLAN specific TLVs in sent LLDP frames.

117375 - Make numbers of retries for transfer to busy endpoint configurable

Default is 4, the recall happens after the last try

114631 - Make sure ReleaseChannel is sent only once

Fix for recursion.

119782 - myApps macOS: Popup windows did not close after reload of main window

If the main window was reloaded, e.g. after PBX update, detached apps were not closed on macOS.

119536 - myApps windows/macOS: limit bandwith of update download

A high network usage causes calls with bad quality.

114163 - myApps Windows/macOS: postpone error message of a failed update download until three retries have been done (3 hours)

This will avoid triggered failed update messages if the download succeeds after some time.

134450 - myApps Windows: automatically start update on myApps restart

If an update is available, the update is now automatically installed at once after a restart of myApps.

A notification is shown during the update (as long as myApps notifications are not disabled by windows settings).

115774 - myApps Windows: delay MSI installation for some seconds to prevent that files are still in use

This might be a workaround for an issue, where some files do not exist anymore after an update installation.

113003 - myApps Windows: support dialing in Microsoft Office 2019

Use of newer interfaces which support dialing inside contact cards in Microsoft Office products.

119935 - myApps: Add autocomplete attributes to login form

The input fields for username and password now have the recommended markup for password managers.

autocomplete="username"

autocomplete="current-password"

112502 - myApps: auto appear offline setting not working in default case

Default value was set to 5 min but the timer used to check user activity was not startet.

127501 - myApps: Hidden apps should be removed from home screen immediately

If the hidden flag of an app changes to "true", it is removed immediately from the home screens of running myApps instances.

117662 - myApps: Notify dialog subscribers, if calls are gone due to connection loss

After the PBX was restarted, old calls from dialog subscriptions were still displayed in the phone apps.

119934 - myApps: Use passive event listeners for touchstart

In order to improve scrolling performance in browsers (and get rid of browser hint).

120051 - myAppsClient OutlookSearch: Avoid deadlocks in init of contact folders

Sometimes there might be deadlocks by initializing the contacts folder. 

115271 - No media on call from fixed phone to softphone with media-relay

In case fixed phone uses Phone App and Media Relay and Softphone is second registration

121901 - OEM: Firmware: HTTP client improvements

Improvements for OEM:

• Allow setting User Agent by application
• Allow setting redirect-count by application

121844 - OEM: Firmware: Possibility to use device certificate for update client

Added config option /device-cert for update module for OEM.

120339 - OEM: X509 changes for programming certificates in production

Small extensions of the commands and events of the X.509 module.

119168 - PBX Manager Plugin APs: fixed connection to external APs within native myApps clients

The websocket connection is now established through the appproxy in the native client to prevent certificate issues.

In a real browser, an error is now shown if the connection couldn't be established which hints, that the hosts certificate must be trusted in a separate window first.

134637 - PBX outgoing registrations: Support H.323/TCP and H.323/TLS

Only standard H.323 was supported

116901 - PBX Plugin for Templates does not show Apps if too many

If there are too many Apps, the PBX did not send any App info.

131612 - PBX-Manager WQs: CFx settings were not stored on PBX

Bool-not was sent as "not" instead of true on UpdateObject (PbxAdminApi)

ep-h323/e164 was not set if the OK button was clicked before clicking on the checkmark button. This stored the other settings but not this one.

117654 - PBX: Advanced UI should show "unlicensed" for app licenses

App licenses are now displayed the same as other licenses. If a license is configured, but could not be acquired, "unlicenses!" is displayed

127248 - PBX: Don't send HOLD/RETRIEVE_NOTIFY to Media-Relay Device

This is interworked to SIP sendonly, which can be harmfull for Media.

130155 - PBX: Firewall address was not set correctly sometimes

The firewall address is needed for third party phone without ICE, so transmit the media address for the internal TURN server.

126009 - PbxAdminApi GetGroups could result in restart, if many groups

More then 1000 groups could cause a problem

122038 - PbxAdminApi: Added gk_domain to MonitorConfigInfo

"Use as domain" is also sent now with MonitorConfigInfo and included on PbxConfigUpdate(const char* domain, const char* pbx, const char* dns, bool gk_domain). If it is false, then the sip must be sent without domain to the SearchApi and to Users App. Otherwise the PBX rejects the calls with "number unknown".

116864 - PCAP-Recording did not work on SIP interfaces

PCAP-Recording did not work on SIP interfaces.

129606 - permit http client/server configuration in minifirmware

the pages "Services/HTTP/Client" and "Services/HTTP/Server"  were empty in advanced GUI  of minifirmware.

126871 - Phone App: Pickup from favorite defined with international number did not work

The international number has to be converted with the prefixes defined for the node

133234 - Phone apps: Normalize SIP-URI before dialing

Remove whitesapace and remove "sip:" prefix.

E.g. "sip:abc@def.org " into "abc@def.org".

112306 - phone USB: support Gigaset ION (DECT Handset/Speaker)

 add support for Gigaset ION (DECT Handset/Speaker)

129697 - phone USB: support Snom A330M/D headset, C300 personal conference

Add support for Snom A330M/D headset and C300 personal conference (speakerphone)

116260 - Phone-App: Could not start local 3-pty conference while PCAP recording is active

Could not start local 3-pty conference in Phone-App while PCAP recording is active on phone device.

116201 - Phone-App: Improve search functionality

Did not find "mueller" when search for "müller" or vice versa.

117719 - Phone-App: Remove filtering of search results

Remove filtering of search results from Phone-App and Softphone-App and Rcc-App.

Display all results received from search-providers.

113894 - Phone-App: Show diverting party information in desktop notification

Show information about call diversion on desktop notifications for incoming/missed calls.

133112 - Phone-App: Show remote phone number in call-history

Show remote phone number in call-history, not only display-name and timestamp.

126919 - Phone: Send absence-messages without CLIR

Send absence-messages without CLIR even if CLIR is activated.

111755 - Phones: Does not register with some configuration

Phone does not register at H323 gatekeeper when there is a SIP proxy configured.

127264 - Phones: Fix for MWI fkey

In some scenarios MWI fkey was not deactivated when messages were played in Voicemal-App.

117646 - Phones: International numbers not minimized before being dialed

International numbers not minimized before being dialed. But only if fully qualified subscriber number is configured in dialing location (e.g. +49703173009).

134980 - Phones: New recording button at call

If fkey "recording" is configured another recording button is available at the call. This new button acts like "recording" fkey.

126872 - Phones: Partner fkey with international number id not work

Partner fkey with international number (+4912345678) id not work. No call activitywas displayed.

118253 - Potential buffer overrun related to utf-8 to ucs2 conversion

In voip protocols and the gateway

127749 - Profile: 3rd party provisioning provider appears multiple times on multi PBX systems

List only provisioning providers from PBX configured in the Users Admin App settings

131349 - Raise "PoE+ missing" alarm only when PoE+ is missing at all

Alarm 0x00120004 Critical BOX Missing POE-plus

should be set only if PoE+ is signalled neither by ethernet hardware nor via LLDP.

110470 - Recording: Fix for redirect to HTTPS

Devices configured to record via HTTP may be redirected by server to use HTTPS instead.

Broken recording files were the result.

130608 - Removed obsolete HTTP client authenticated URLs during install

Two URLs for files and backup-files have been created which were not used at all.

108195 - Reverse proxy: More information in Automatic blacklist events

Service and Host is added

121835 - Reverse Proxy: Restart after more then 65535 incomplete HTTPS requests

Just TLS connect, no HTTP

124726 - SeW-UsersAdmin failed with leak-check

Address .. is 0 bytes inside a block of size 6 free'd

#changed users.cpp

114625 - Show active call diversion in Phone-App

Show active call diversion in Phone-App and Softphone-App.

135656 - SIP-Provider Profile DE-Telematica-SIP_Trunk

Update SIP Profile

135973 - SIP-Provider Profile DE-TNG_Stadtnetz_GmbH-TNG Stadtnetz SIP_Trunk

Update SIP Profile

135974 - SIP-Provider Profile FR-Codepi-TRUNK_SIP

Update SIP Profile

135976 - SIP-Provider Profile NL-Destiny-SIP_TRUNK

Update SIP Profile

135977 - SIP-Provider Profile NL-infopact-SIP_Trunk

Update SIP Profile

135978 - SIP-Provider Profile NL-KPN-Vast_bellen_Dienst_VoIP_Connect

Update SIP Profile

135975 - SIP-Provider Profile PL-Netia-SIPTrunk

Update SIP Profile

135972 - SIP-Provider Profile PT-G9Telecom-SIP_Trunk

Update SIP Profile

135967 - SIP-Provider Profile USA-Telnyx-SIP_Trunk

Updated SIP Provider Profile

135556 - SIP: CFNR to SIP phone with Phone-App did not work

A delayed call forwaring to a user with SIP phone and Phone-App did not work.

119297 - SIP: Fix for Request-URI validation

Make interop-tweak /support-broken-registrar work again.

120318 - SIP: Initiate callback in SIP (OEM)

Support for OEM callback request.

126796 - SIP: Offer encryption as optional in Media-Relay scenarios

Offer encryption as optional (SAVP plus AVP) in Media-Relay scenarios, instead of mandatory (SAVP only).

117873 - SIP: SDP answer sometimes misses rejected media description

If SDP offer has multiple media descriptions (e.g. SAVP and AVP), the SDP answer must contain the same media descriptions in the same order.

Sometimes only the selected media description was returned.

136591 - SIP: Try A-query if SRV-query fails with SERVER FAILURE (2)

Try A-query if SRV-query fails with SERVER FAILURE (2). Instead of trying SRV-query repeatedly.

116144 - Slash sound sometimes not played

Beep-beep was played instead.

134203 - SNMP: ifTable for "RTPTPx" Interface wasn't serviced

An internal interface with description "RTPTP0" wasn't projected into the interfaces mib table, causing external SNMP agents to fail.

117393 - Softphone-App (WebRTC): Allow microphone and speaker to selected separately

Do not offer bundles of mic-and-speaker combinations.

131740 - Softphone-App: Must not play local ringback-tone if inband-info is available

If inband-info (inband ringback-tone) is available the Softhone-App must not play its own local ringback-tone.

111768 - Softphone-App: Start calls with 'sending-complete'

Add 'sending-complete' flags to call setup message.

Keep calls from getting delayed by enbloc timers.

Overlap dialing is not supported anyway.

133770 - Softphone: Display product-id and version-id in PBX registrations

In JSON "Register" new attributes "productId" and "versionId" can be provided.

132322 - Softphone: Fix for negotiation problem with Voicemail

Sometimes calling voicemail ends with no audio after first audio prompt.

133951 - Softphone: Send DTMF on all connected calls

Send DTMF on both connected calls during local 3pty conference.

131805 - Some Chat improvements

Some shortcomings of chat are addressed with the 13r3 release

• Group Improvements, minor UI changes and option to configure an avatar picture for a group
• The behaviour of the badge counter is verified
• Attachments identified as picutures are displayed as pictures
• Performance optimizations
• Synchronization of different clients. A message sent on one client is displayed on another client of the same user

121916 - SRTP: Support for CSRC in RTP header

Support for RTP packets including CSRC identifiers.

120454 - TCP: Robustness to Blind In-Window Attacks

Reduce the vulnerability for TCP Blind In-Window Attacks  (see RFC 5961)

118897 - TCP: send keepalive frames steady if keepalive is configured

if a packet from remote party was received before the keepalive timer fired the timer was restarted but no keepalive frame was sent. Thus it may take up to two keepalive periods before a frame is sent. To "use the TCP keepalive to maintain the NAT binding and be able to have a longer SIP expires time" this optimization is dropped and a keepalive frame is sent whenever the keepalive timer fires.

125714 - TLS: Remove DHE ciphers from strict profile

The following ciphers have been removed from the strict TLS profile:

    TLS_DHE_RSA_WITH_AES_256_GCM_SHA384,

    TLS_DHE_RSA_WITH_AES_128_GCM_SHA256,

117659 - TLS: Workaround for incompatibilities with some .NET/Schannel TLS clients

Depending on the Windows version and settings, the SChannel implementation offers DHE but blocks it once negotiated. Also on Windows 11 the ec_point_formats extension is missing in some cases, so ECDH could not be negotiated with TLS 1.2.

• Allow missing ec_point_formats extension in ClientHello.
• Change DHE ciphers to lowest priority in all TLS profiles.

115508 - Trunk Plugin - New trunk object has empty "Name"

A trunk now has the additional field "SIP" in the UI. No mandatory field. UI and behaviour thus analogous to other plugins

135756 - TURN option to configure public address

This is used for a TURN server placed in the internal network, and a firewall with UDP port forwarding to the TURN

123580 - update bsd-regex sources to latest version

Update to latest source code version.

108050 - Use different DDBB connections for CDRs, Calllist and Reports

Speed up reporting requests by using different DDBB connections.

One connection for reception of CDRs, another one for the calllist queries and a last one for the generation of reports which could be specially problematic if large reports are requested.

131387 - Users Service: Check app session when JSON message is received

Check which app opened the session and only allow certain messages for certain apps. For example, ReadProfile should only be allowed for innovaphone-profile sessions.

119355 - Users-Register: Remove check if an user already exists on register.htm and password.htm

With a HTTP request is done before sending the from on the registration page to know if the user already exists. It lets an attacker find out if a given user exists in the system.

111653 - Voip registration new checkmark "Prefer installed certificate"

This allows to use a user installed certificate together with the from the serial number automatically generated registration names

115486 - Web-Access-Client: Change mute/unmute implementation

Instead of releasing/allocating microphone device for mute/unmute, better use audio track's 'enabled' property.

Microphone devices stays occupied during mute.

134406 - Web-Access-Client: Fix for device enumeration

On PC's without camera sometimes not even a microphone was listed.

116671 - Web-Access-Client: Fix for double/wrong videos

Detect when two participant elements show the same video track.

135989 - Web-Access-Client: Lower volume of disc-tone and play on selected audio device

Lower volume of disconnect-tone and play on selected audio device.

116340 - Web-Access-Client: Muted state sometimes lost

Muted state sometimes lost when CTRL-T is pressed (or may other STRG combinations also).

116633 - Web-Access-Client: Push-to-talk banner did not work anymore

Push-to-talk banner did not work anymore

126250 - Web-Access-Client: Support for participant with same SIP attribute

Support for users participating with more than one endpoint.

116705 - Web-Access-Client: Try to improve Screen-Sharing quality

Esp. when using Chrome screen-sharing is often unreadable. Send with very low bandwith and high compression.

117029 - Webdav-Servlet: Bug when handling Range request

Bad response when end-of-range was omitted.

E.g. Range: bytes=0-

Only one byte was delivered instead of complete file content.

118005 - Yealink App: Delete device from User Object when deprovisioning

When deprovisioning a device with the Yealink UI, the device was not removed from the User Object.

127744 - Yealink: Provisioning using Profile App does not work

The problem when the provisioning process stops after MAC address input was fixed.