Reference9:Services/Telnet
Jump to navigation
Jump to search
There are also other versions of this article available:
Reference | Reference7 | Reference8 | Reference9 (this version)
Access via the Telnet protocol can be enabled here.
Enable Telnet: | A checked check box enables access to the device using telnet. The device can be configured with commands such as reset, config change UP1 /url <http url> /poll <secs>, for example. |
All Admin Accounts can have access via Telnet. Viewer accounts do not have access, also Kerberos Accounts do not have access (as the Password is send unencrypted via Telnet).