Reference9:Concept USB Headset For SoftwarePhone: Difference between revisions
(New page: {{PAGENAME}} The innovaphone SoftwarePhone works with USB headsets connected to the PC. This document describes how to install, configure and use USB headsets. ==Ap...) |
|||
(8 intermediate revisions by 3 users not shown) | |||
Line 51: | Line 51: | ||
*Plantronics CS50/60 (Item No xxx, Product Code 0x47f0410) | *Plantronics CS50/60 (Item No xxx, Product Code 0x47f0410) | ||
*Plantronics Savi 740 (Item No 83542-12, Product Code 0x47fac01) | *Plantronics Savi 740 (Item No 83542-12, Product Code 0x47fac01) | ||
===Sennheiser=== | |||
*Sennheiser VoIP USB headset SH 350 IP (Item No xxx, Product Code 0x0008) | |||
*Sennheiser DW Office (Item No xxx, Product Code 0x740a). Please select the first device. | |||
*Sennheiser CEHS-CI 02 with USB adapter cable (Item No xxx, Product Code 0x0030). Please select the second device. | |||
==Unsupported Headsets== | |||
Sometimes new headsets are relased which are very similar to one of the already supported headsets. But if the signature (vendor/product) of the headset is unknown to the "hid.tbl" the call control functions of the headset are without effect. | |||
A good example of this case is the Jabra PRO 930 "OC" version. Since it has a different ID than the Jabra PRO 930 it will not be recognized and by this will not work as expected. | |||
Possible solution could be to generate a new MAP for the Jabra PRO 930 "OC" in the "hid.tbl" stored in C:\Program Files (x86)\innovaphone\SoftwarePhone . | |||
Just open the file with any text editor (e.g. notepad++), search for Jabra PRO 930 and copy the whole section as displayed below: | |||
[Jabra PRO 930] | |||
id = 0xb0e1016 | |||
len = 0x03 | |||
map = 0x02, 0x01, 0x00: 0x93 # offhook | |||
map = 0x02, 0x03, 0x00: 0x93 # offhook | |||
map = 0x02, 0x09, 0x00: 0x93 # offhook | |||
map = 0x02, 0x0b, 0x00: 0x93 # offhook | |||
map = 0x02, 0x0a, 0x00: 0x94 # onhook | |||
map = 0x02, 0x2b, 0x00: 0x90 # flash (button 1s in offhook mode) | |||
map = 0x02, 0x02, 0x10: 0x8e # disconnect | |||
map = 0x02, 0x08, 0x10: 0x8e # disconnect | |||
map = 0x02, 0x09, 0x10: 0x8e # disconnect | |||
map = 0x02, 0x01, 0x00: 0xf5 # offhook response | |||
map = 0x02, 0x00, 0x00: 0xf6 # onhook response | |||
map = 0x02, 0x80, 0x00: 0x8e # disconnect (double click in ringing | |||
state) | |||
map = 0x02, 0x8a, 0x00: 0x8e # disconnect (double click in ringing | |||
state) | |||
map = 0x02, 0x08, 0x00: 0xf1 # ring on | |||
After adapting the id to the one of the Jabra PRO 930 "OC" and file storage, problem should be solved by restarting the softwarephone. | |||
<!-- Keywords: softphone softphone --> | |||
== List of supported Headsets for the V10 Softwarephone == | |||
This list is available in the ''Supported USB headsets'' section of [[Reference10:Concept_Softwarephone#Supported_USB_headsets |Reference10:Concept Softwarephone]]. |
Latest revision as of 16:47, 23 October 2014
The innovaphone SoftwarePhone works with USB headsets connected to the PC. This document describes how to install, configure and use USB headsets.
Applies To
This information applies to
- innovaphone SoftwarePhone
Firmware V9hotfix12 and later.
More Information
Disclaimer
Within this document, only the headsets which are operational and tested with the current version of the innovaphone SoftwarePhone are listed. innovaphone gives neither any statement about dedicated functionalities nor will support further features of the different headsets.
Nevertheless it might be the case that even devices with the same label or the same part number will not work in the same way, because of different product codes or modified firmware. So it is recommended to test the headset before buying.
Installation
Follow the vendor setup directions for using the headset with a PC.
Configuration
If a USB headset is detected and known by the SoftwarePhone, it is enabled automatically as soon as it is connected. Alternatively, there's a possibility to select the headset manually via the SoftwarePhone configuration menu.
Calls
Calls via the SoftwarePhone are always made by use of the myPBX-client. For further information please refer to the Concept_myPBX article.
Known Problems
Supported Headsets
Jabra/GN
- GN 8120 (Item No xxx, Product Code 0xb0e8120)
- GN 9350 (Item No xxx, Product Code 0xb0e9350)
- Jabra A330 device 2 (Item No xxx, Product Code 0xb0ea330)
- Jabra BIZ 2400 (Item No xxx, Product Code 0xb0e090a)
- Jabra SPEAK 410 USB (Item No 7410-209, Product Code 0xb0e0410)
- Jabra SPEAK 410 USB 2 (Item No 7410-209, Product Code 0xb0e0412)
- Jabra LINK 320 USB (Item No xxx, Product Code 0xb0e0320)
- Jabra Pro 9460 (Item No 9460-25-5707101, Product Code 0x1041)
- Jabra Pro 930 (Item No 930-25-509-101, Product Code 0x1016)
Plantronics
- Plantronics CS50/60 (Item No xxx, Product Code 0x47f0410)
- Plantronics Savi 740 (Item No 83542-12, Product Code 0x47fac01)
Sennheiser
- Sennheiser VoIP USB headset SH 350 IP (Item No xxx, Product Code 0x0008)
- Sennheiser DW Office (Item No xxx, Product Code 0x740a). Please select the first device.
- Sennheiser CEHS-CI 02 with USB adapter cable (Item No xxx, Product Code 0x0030). Please select the second device.
Unsupported Headsets
Sometimes new headsets are relased which are very similar to one of the already supported headsets. But if the signature (vendor/product) of the headset is unknown to the "hid.tbl" the call control functions of the headset are without effect.
A good example of this case is the Jabra PRO 930 "OC" version. Since it has a different ID than the Jabra PRO 930 it will not be recognized and by this will not work as expected.
Possible solution could be to generate a new MAP for the Jabra PRO 930 "OC" in the "hid.tbl" stored in C:\Program Files (x86)\innovaphone\SoftwarePhone . Just open the file with any text editor (e.g. notepad++), search for Jabra PRO 930 and copy the whole section as displayed below:
[Jabra PRO 930] id = 0xb0e1016 len = 0x03 map = 0x02, 0x01, 0x00: 0x93 # offhook map = 0x02, 0x03, 0x00: 0x93 # offhook map = 0x02, 0x09, 0x00: 0x93 # offhook map = 0x02, 0x0b, 0x00: 0x93 # offhook map = 0x02, 0x0a, 0x00: 0x94 # onhook map = 0x02, 0x2b, 0x00: 0x90 # flash (button 1s in offhook mode) map = 0x02, 0x02, 0x10: 0x8e # disconnect map = 0x02, 0x08, 0x10: 0x8e # disconnect map = 0x02, 0x09, 0x10: 0x8e # disconnect map = 0x02, 0x01, 0x00: 0xf5 # offhook response map = 0x02, 0x00, 0x00: 0xf6 # onhook response map = 0x02, 0x80, 0x00: 0x8e # disconnect (double click in ringing state) map = 0x02, 0x8a, 0x00: 0x8e # disconnect (double click in ringing state) map = 0x02, 0x08, 0x00: 0xf1 # ring on
After adapting the id to the one of the Jabra PRO 930 "OC" and file storage, problem should be solved by restarting the softwarephone.
List of supported Headsets for the V10 Softwarephone
This list is available in the Supported USB headsets section of Reference10:Concept Softwarephone.