Reference11r1:Concept myPBX WebRTC Softwarephone: Difference between revisions

From innovaphone wiki
Jump to navigation Jump to search
(Replacing page with 'myPBX WebRTC Softwarephone Note: Firmware versions up to 12r1 are not compatible with WebRTC any more, because WebRTC requires RTCP-Mux that is only inclu...')
 
(39 intermediate revisions by 2 users not shown)
Line 1: Line 1:
[[Category:Concept|myPBX WebRTC Softwarephone]]
[[Category:Concept|myPBX WebRTC Softwarephone]]
The myPBX web application in version 11 comes with an integrated WebRTC software phone that can be used in browsers that support WebRTC.


== How it works ==
Note: Firmware versions up to 12r1 are not compatible with WebRTC any more, because WebRTC requires RTCP-Mux that is only included in 12r2 and up.
* The web application has an integrated WebRTC endpoint that can be controlled like a regular phone using myPBX.
* The endpoint connects to the PBX using Websocket. The PBX creates a signaling instance and a registration that controlls the endpoint.
 
== Requirements ==
=== PBX ===
* Recent firmware (v11 rc1 or higher)
* myPBX license (enabled at the user object)
* enabled ICE and DTLS-SRTP
 
=== Computer ===
* Browser supporting WebRTC (currently Firefox and Chrome)
* Microphone or headset
 
=== Remote endpoint ===
* The remote endpoint has to support ICE and DTLS-SRTP. innovaphone devices from v11 rc1 do so.
 
== Configuration ==
=== PBX ===
* Create a device at the user object. Make sure both hardware ID and name are given. Check "Config VOIP" and press "Apply".
* The "Edit User" Dialog now shows a new tab with the name of the device. In that tab select "DUMMYVOIP" as the method for the Outgoing Registration.
* If you now open myPBX in a suitable web browser the WebRTC phone appears as a normal phone.
 
''Note: In v11r1 rc1 only the first four devices can be used for "Config VOIP".''
 
=== Remote Endpoint ===
The remote endpoint must support ICE and DTLS-SRTP. In v11 RC1 DTLS-SRTP is not enabled by default on innovaphone Devices. Therefore if you like to try the WebRTC Softwarephone you need to enabled it.
 
  !config add H323 /dtls on
  !config add SIP /dtls on
  !config add TSIP /dtls on
  !config add SIPS /dtls on
 
For debugging purposes the following trace flags are useful.
 
  !config add H323 /ice-trace on /dtls-trace on
  !config add SIP /ice-trace on /dtls-trace on
  !config add TSIP /ice-trace on /dtls-trace on
  !config add SIPS /ice-trace on /dtls-trace on
 
== Usage ==
=== Activation ===
Select the corresponding device in myPBX. The browser asks for permission to access the microphone of the computer. Please accept.
 
=== Calling ===
Incoming and outgoing calls can be done as usual using myPBX.
 
== Known issues ==
* In RC1 the phone does not ring for incoming calls. Also ringbacktones are played.
* The WebRTC softwarephon is currently not available in the myPBX launcher because the underlying Internet Explorer does currently not support WebRTC.

Latest revision as of 19:12, 28 October 2019


Note: Firmware versions up to 12r1 are not compatible with WebRTC any more, because WebRTC requires RTCP-Mux that is only included in 12r2 and up.

Retrieved from "https://wiki.innovaphone.com/index.php?title=Reference11r1:Concept_myPBX_WebRTC_Softwarephone&oldid=53924"