Reference:Configuration/IP/NAT: Difference between revisions
Jump to navigation
Jump to search
(submenu nav ip deleted) |
mNo edit summary |
||
| Line 1: | Line 1: | ||
The telephone is able to connect IP terminals from the network with a non-public address to the public Internet. For this, Network Address Translation | The telephone is able to connect IP terminals from the network with a non-public address to the public Internet. For this, '''NAT''' (Network Address Translation) is necessary. NAT serves as the router and requires a configuration of the PPPoE protocol. | ||
The necessary parameters for this configuration can be set here: | The necessary parameters for this configuration can be set here: | ||
* '''Enable NAT:''' A checked check box enables NAT in general. This function is only required if the IP telephone is also a DSL router. | * '''Enable NAT:''' A checked check box enables NAT in general. This function is only required if the IP telephone is also a DSL router. | ||
* '''Default forward destination:''' If all incoming data packets are to be forwarded to a particular IP-Adresse as standard, the destination IP-Adresse must be entered here. | * '''Default forward destination:''' If all incoming data packets are to be forwarded to a particular IP-Adresse as standard, the destination IP-Adresse must be entered here. | ||
* '''Port-specific forwarding:''' To be able to address several internal destinations, different port number numbers are assigned to IP addresses of the internal network here. | * '''Port-specific forwarding:''' To be able to address several internal destinations, different port number numbers are assigned to IP addresses of the internal network here. | ||
<small>[[IP|..go back]]</small> | <small>[[IP|..go back]]</small> | ||
Revision as of 16:44, 19 March 2007
The telephone is able to connect IP terminals from the network with a non-public address to the public Internet. For this, NAT (Network Address Translation) is necessary. NAT serves as the router and requires a configuration of the PPPoE protocol. The necessary parameters for this configuration can be set here:
- Enable NAT: A checked check box enables NAT in general. This function is only required if the IP telephone is also a DSL router.
- Default forward destination: If all incoming data packets are to be forwarded to a particular IP-Adresse as standard, the destination IP-Adresse must be entered here.
- Port-specific forwarding: To be able to address several internal destinations, different port number numbers are assigned to IP addresses of the internal network here.