Reference9:Phone/User/Function-Keys/Create-Registration: Difference between revisions

Revision as of 18:56, 26 January 2011

Create Registration

In the active status, a further user is registered for the telephone. Therefore, the registration can take place:

with the same telephone system
with a different telephone system or
directly with a provider for IP telephones

For this, a choice of H.323 or SIP protocol is offered. The assignment of the parameters in the active state needs to be ascertained from the respective system provider. With the “Set active” setting, the new registrations are activated.

Note: You can specify an “active user”. Outgoing calls are made under the user’s parameters, and the function keys are transferred to a different IP telephone if necessary.

First, you must select the required protocol for registration. The options are H.323 or SIP. The respective parameters are automatically adjusted to the selected protocol.

H.323 protocol:

Gatekeeper address: The IP address at which the innovaphone PBX or the responsible gatekeeper may be reached.
Gatekeeper identifier: If several gatekeepers are to be active at one address, a particular gatekeeper is identified amongst them using the name entered here.
Number: Here, you specify the call number required for the registration.
Name: The name you enter here is only required for the registration if the number was not specified.

SIP protocol:

Server address: IP address at which the responsible SIP server may be reached.
Domain: Instead of the IP address, you can specify the domain of the provider, which is found after the @ of the URI.
User ID: The user ID, which corresponds to the part in front of the @ of the URI.

Note: The user ID can be numeric or alphanumeric.

User name: In some SIP registrations, a separate user name is required for authorisation. In all other cases, the field should be left empty.
STUN server: The IP address or domain name must be configured if the telephone uses a non-public IP address, but the server is accessible under a public IP address. The value is given by the SIP provider or administrator.

The following parameters can be set protocol independently. These parameters are automatically negotiated during connection setup. A change is only necessary if the gatekeeper/server has special requirements regarding the connection protocol.

Password: The registration requires a password, which can be agreed in this setting.
Retype: The confirmation prompt for the password.
Coder: The protocols for voice compression are listed in this parameter.
Framesize [ms]: The packet sizes are automatically negotiated with 60 ms. With this parameter, you can specify a different RTP packet size.
Exclusive This parameter allows no negotiation, but accepts only the preset parameters.
Silence compression: No outbound packets are transmitted from the IP telephone during silence (no conversation). Noise is played on the other side.
Set active: Once registration has taken place, this registration is set as the active registration.

@@ Line 1: / Line 1: @@
-== Boolean Object ==
+== Create Registration ==
-This function monitors the state of the addressed Boolean Object in the innovaphone PBX. A Boolean Object as seen by the user is in one of four states:
+In the active status, a further user is registered for the telephone. Therefore, the registration can take place:
+* with the same telephone system
+* with a different telephone system or
+* directly with a provider for IP telephones
+For this, a choice of H.323 or SIP protocol is offered. The assignment of the parameters in the active state needs to be ascertained from the respective system provider. With the “Set active” setting, the new registrations are activated.
-* '''Automatic Off State''': The automatic mode FALSE rule applies.
+''Note: You can specify an “active user”. Outgoing calls are made under the user’s parameters, and the function keys are transferred to a different IP telephone if necessary.''
-* '''Automatic On State''': The automatic mode TRUE rule applies.
+First, you must select the required protocol for registration. The options are H.323 or SIP. The respective parameters are automatically adjusted to the selected protocol.
-* '''Manual Override Off State''': The manual override FALSE rule applies (automatic mode rules are disabled).
+'''H.323 protocol''':
-* '''Manual Override On State''': The manual override TRUE rule applies (automatic mode rules are disabled).
+* '''Gatekeeper address''': The IP address at which the innovaphone PBX or the responsible gatekeeper may be reached.
+* '''Gatekeeper identifier''': If several gatekeepers are to be active at one address, a particular gatekeeper is identified amongst them using the name entered here.
+* '''Number''': Here, you specify the call number required for the registration.
+* '''Name''': The name you enter here is only required for the registration if the number was not specified.
-How a state is indicated at the phone is configured under the respective topic.
+'''SIP protocol''':
-'''Boolean Object Identification'''
+* '''Server address''': IP address at which the responsible SIP server may be reached.
-* The number and/or name of the Boolean Object is configured here.
+* '''Domain''': Instead of the IP address, you can specify the domain of the provider, which is found after the @ of the URI.
+* '''User ID''': The user ID, which corresponds to the part in front of the @ of the URI.
-'''Toggle State	''' (since V6.00 SR1-hotfix3)
+''Note: The user ID can be numeric or alphanumeric.''
-* If this checkmark is set the key operates as a toggle key. Each keystroke switches from the current state of the addressed Boolean Object to the next state in the sequence ''Automatic Off/On State'' / ''Manual Override Off State'' / ''Manual Override On State''.
- '''Note:'''  Toggling works only if a number is configured for the Boolean Object.
+* '''User name''': In some SIP registrations, a separate user name is required for authorisation. In all other cases, the field should be left empty.
+* '''STUN server''': The IP address or domain name must be configured if the telephone uses a non-public IP address, but the server is accessible under a public IP address. The value is given by the SIP provider or administrator.
-* If this checkmark is '''not''' set pressing the key sets up a connection to the Boolean Object. The state of the Boolean Object can be changed then by entering DTMF codes.
+The following parameters can be set protocol independently. These parameters are automatically negotiated during connection setup. A change is only necessary if the gatekeeper/server has special requirements regarding the connection protocol.
+* '''Password''': The registration requires a password, which can be agreed in this setting.
-''DTMF codes:''
+* '''Retype''': The confirmation prompt for the password.
-*0  - Clear Manual Override, i.e. switch to the automatic mode rule according to current time of day.
+* '''Coder''': The protocols for voice compression are listed in this parameter.
-*11 - Manual Override On, i.e. apply the manual override TRUE rule.
+* '''Framesize [ms]''': The packet sizes are automatically negotiated with 60 ms. With this parameter, you can specify a different RTP packet size.
-*10 - Manual Override Off, i.e. apply the manual override FALSE rule.
+* Exclusive This parameter allows no negotiation, but accepts only the preset parameters.
- '''Note:''' This function will only work if the monitoring user (i.e. the user configuring the key)
+* '''Silence compression''': No outbound packets are transmitted from the IP telephone during silence (no conversation). Noise is played on the other side.
-       shares a group with the addressed Boolean Object and this group is selected under
+* '''Set active''': Once registration has taken place, this registration is set as the active registration.
-       “Group indications” in the innovaphone PBX User Object of the monitoring user.

Reference9:Phone/User/Function-Keys/Create-Registration: Difference between revisions

Revision as of 18:56, 26 January 2011

Create Registration

Navigation menu

Search