Reference11r1:PBX/Objects/Conference: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
Line 1: | Line 1: | ||
The PBX conference object | The PBX conference object manages conference rooms with announcements and PIN protection. | ||
The conference calls themselves are connected by one or more conference servers registered to this object as devices. If more than one conference server is used, the different media types of the calls can be split to the different servers. | The conference calls themselves are connected by one or more conference servers registered to this object as devices. If more than one conference server is used, the different media types of the calls can be split to the different servers. | ||
Line 32: | Line 32: | ||
; Extern Announcement Name/No: Announcements can be provided by an external destination which name or number is to be configured here. | ; Extern Announcement Name/No: Announcements can be provided by an external destination which name or number is to be configured here. | ||
; Room number length | ; Room number length | ||
: If the room number length is zero, there is only one room available. If it isn't zero, static rooms can be configured and temporary rooms can be created with the | : If the room number length is zero, there is only one room available. If it isn't zero, static rooms can be configured and temporary rooms can be created with the operator. | ||
; PIN | ; PIN | ||
: If the room number length is zero, the PIN of the single conference room can be configured here. It can be empty or consists of four digits. | : If the room number length is zero, the PIN of the single conference room can be configured here. It can be empty or consists of four digits. | ||
Line 39: | Line 39: | ||
; Trace | ; Trace | ||
: If ticked, the trace of this PBX object is enabled. | : If ticked, the trace of this PBX object is enabled. | ||
== Rooms == | |||
Up to ''ten'' static rooms can be configured. If the room is called by the first member, the configured number of channels and all media types must be available otherwise the room isn't available. If the last member of a room leaves it, the reserved channels are released again. | |||
A room is defined by: | |||
; Room number | |||
: The room number must be unique; it length depends on the room number length option. | |||
; Number of channels | |||
: The number of channels which must be available to open a room at dial-in. If this count of member is reached, the room is full and no further caller can take part. | |||
; Media types | |||
: If a media type is ticked, it is used for the call. If not all ticked media types are available at dial-in, the room can't be opened. | |||
; PIN | |||
: The room PIN can be empty or consists of four digits. The PIN can't be a part of the dialing number. | |||
== Operator == |
Revision as of 17:08, 21 November 2014
The PBX conference object manages conference rooms with announcements and PIN protection.
The conference calls themselves are connected by one or more conference servers registered to this object as devices. If more than one conference server is used, the different media types of the calls can be split to the different servers.
General Configuration
The information about general configuration options shared by all objects can be found at Reference11r1:PBX/Objects.
Devices
- Hardware Id
- The hardware Id must match with a hardware Id of a device on the General page. The device is registered to this object and provides the conference service.
- innovaphone device
- This should be ticked if the MCU is an innovaphone device.
- Media Types
- If a media type is ticked, calls to the registration includes this media type.
- Number of channels
- The number of the available channels of the MCU device.
- MCU Room Numbers
- If the device isn't an innovaphone device and has severals rooms, the room numbers which are dialed can be configured here.
- Registration
- If a registration to this hardware Id exists, the IP address of the registrar is shown here.
Options
- Announcement URL
- The URL where the announcements were saved. A '$type' within the URL is substituted for the announcement type string. These announcement types are known by the conference module:
- Welcome: Announcement of a welcome message if the operator isn't active. ($type="welcome")
- Welcome in room: Announcement of a welcome message if a room number is dialed. ($type="welcome_room")
A room specific message can also be used. ($type="welcome_room_10" for room 10) - Room number: Announcement to input a room number. ($type="input_room_number")
- PIN: Announcement to input a PIN. ($type="input_pin")
- Wrong PIN: Announcement about a wrong PIN input. ($type="pin_wrong")
- No input: Announcement if no input is done by the caller within a certain time. ($type="no_input")
- Extern Announcement Name/No
- Announcements can be provided by an external destination which name or number is to be configured here.
- Room number length
- If the room number length is zero, there is only one room available. If it isn't zero, static rooms can be configured and temporary rooms can be created with the operator.
- PIN
- If the room number length is zero, the PIN of the single conference room can be configured here. It can be empty or consists of four digits.
- Operator enabled
- If ticked, the operator is active. It can be reached if no room number is dialed.
- Trace
- If ticked, the trace of this PBX object is enabled.
Rooms
Up to ten static rooms can be configured. If the room is called by the first member, the configured number of channels and all media types must be available otherwise the room isn't available. If the last member of a room leaves it, the reserved channels are released again. A room is defined by:
- Room number
- The room number must be unique; it length depends on the room number length option.
- Number of channels
- The number of channels which must be available to open a room at dial-in. If this count of member is reached, the room is full and no further caller can take part.
- Media types
- If a media type is ticked, it is used for the call. If not all ticked media types are available at dial-in, the room can't be opened.
- PIN
- The room PIN can be empty or consists of four digits. The PIN can't be a part of the dialing number.