Howto:Tracing from Trapeze Access Points to Wireshark: Difference between revisions
Jump to navigation
Jump to search
m (New page: ==Applies To== This information applies to * Trapeze WLAN Infrastucture (e.g. MXR-2) ==Summary== This is a quick a dirty introduction to setting up a Trapeze management switch for traci...) |
(No difference)
|
Revision as of 15:56, 4 December 2009
Applies To
This information applies to
- Trapeze WLAN Infrastucture (e.g. MXR-2)
Summary
This is a quick a dirty introduction to setting up a Trapeze management switch for tracing all 802.11 traffic to a Wireshark running on a PC. For complete and official documents, contact http://www.trapezenetworks.com.
Settings
Login to a switch through SSH, here the login transcript:
login as: admin
Copyright (c) 2002 - 2009 Trapeze Networks, Inc. All rights reserved.
Username: admin Password:
*trapeze-inno> enable
Enter password: