Reference9:PBX/Objects/Edit Forks: Difference between revisions
Jump to navigation
Jump to search
(New page: With this page call forking can be configured for a user. This means a call for this user is not only sent to endpoints registered to the user object, but also to the forking destination (...) |
|||
Line 6: | Line 6: | ||
For the function of the Mobility features a Mobility license must be installed. | For the function of the Mobility features a Mobility license must be installed. | ||
;Object: The Mobility Object (Long Name) must be set, if the mobile endpoint (GSM Phone) needs to use the [[Reference8:Administration/PBX/Objects/Mobility | mobility features]]. | |||
;Device: Optional, the Device name of the User can be configured here. This name is used by SOAP (TAPI) to address this device for example when initiating a call. | |||
;Delay: A Delay in seconds can be configured to call the mobile endpoint. | |||
;Disable: Disabling the Mobility features for the mobile device, this can also be en/disabled via [[Reference8:Administration/PBX/Objects/DTMF_Features#Enable.2Fdisable_mobility |DTMF featurecodes]] | |||
;Call-Waiting: Enable or disable call-waiting for the mobile endpoint, if a mobile endpoint is in a calla call waiting tone will be played from the PBX to the mobile endpoint via the RTP stream. | |||
;GSM-License: When using the innovaphone GSM client a GSM license is needed and need to be activated. | |||
Revision as of 14:04, 28 June 2011
With this page call forking can be configured for a user. This means a call for this user is not only sent to endpoints registered to the user object, but also to the forking destination (No/Name). If a mobility object is configured for the forking, the phone identified by the forking destination can use the mobility functions. A delay can be configured for the call to the mobile endpoint. This delay is not supported for normal call forking without mobility functions.
Operator calls from a waiting queue are not sent to forking destinations.
Properties of Mobility
For the function of the Mobility features a Mobility license must be installed.
- Object
- The Mobility Object (Long Name) must be set, if the mobile endpoint (GSM Phone) needs to use the mobility features.
- Device
- Optional, the Device name of the User can be configured here. This name is used by SOAP (TAPI) to address this device for example when initiating a call.
- Delay
- A Delay in seconds can be configured to call the mobile endpoint.
- Disable
- Disabling the Mobility features for the mobile device, this can also be en/disabled via DTMF featurecodes
- Call-Waiting
- Enable or disable call-waiting for the mobile endpoint, if a mobile endpoint is in a calla call waiting tone will be played from the PBX to the mobile endpoint via the RTP stream.
- GSM-License
- When using the innovaphone GSM client a GSM license is needed and need to be activated.